Used Hpm Zhj-150 for sale (9,362)

Condition: used, functionality: fully functional, machine/vehicle number: B40400693, Year of construction: 2019, operating hours: 8,037 h, load capacity: 16,000 kg, lifting height: 4,000 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,695 mm, power: 160 kW (217.54 HP), fork carriage width: 2,500 mm, fork length: 2,500 mm, drive type: Diesel, Heavy Duty Forklift - Diesel Chassis Number: B40400693 Load Center: 600 mm Fork Width: 250 mm Fork Thickness: 100 mm Mast Type: Duplex Condition: Refurbished with Warranty Technical Condition: Very Good Front Tyres Type: Pneumatic Front Tyres Size: 12.00 x 20 Front Tyres Condition: New Rear Tyres Type: Pneumatic Rear Tyres Size: 12.00 x 20 Rear Tyres Condition: New Description: TOP CONDITION!!! - COMPLETELY OVERHAULED by KALMAR!!! Only 3,500 mm wheelbase (250 mm shorter than a DCG 160-12), as this unit is a DCG 150-12 upgraded to a 16,000 kg lifting capacity!!! Sideshifter, fork positioner, third valve, fourth valve, fork positioner with sideshifter, fork carriage with central level adjustment, width B = 2,500 mm, Kalmar comfort cabin with air conditioning and radio, central lubrication system for mast and steering axle, road traffic approved lighting, LED headlights front and rear, as well as on the mast, front camera. THE LIFT MAST IS FACTORY NEW!!! Pedpfx Asy Scv Sjlrjgl

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Pedpfx Aljxhfuaorjgl Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Podpfjy Hki Aex Alrogl Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: excellent (used), Several 150 m³ steel storage tanks (extinguishing water tanks) located underground Volume: 150,000 litres diameter: approx. 3.000 mm Pjdpfx Alsfnh Tgsrogl length: approx. 22.500 mm Weight: approx. 28,000 kg The tanks are converted to underground extinguishing water tanks according to DIN 14230: The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. - The tank is emptied, cleaned and has been provided with a bitumen exterior coating by us at the factory. - if required, we can provide the tank with a full bitumen-based interior coating (against corrosion) or epoxy resin interior coating A cost-effective delivery with our own truck is possible. Simply inform us of the delivery location, you will then immediately receive the exact freight costs. An inspection is possible at any time by prior appointment. If you need any further information, just give us a call or send us an e-mail to b.barth (a) barth-tank. de

Condition: used, Vötsch Type: NTUD 125/130/125 Pass-through oven Last maintenance: 3.12.25 Temperature control in 3 zones: Control of the internal temperature via an electronic temperature control system, divided into 3 separate temperature zones and controlled by semiconductor switching devices. This ensures good temperature uniformity whether operating in fresh or recirculated air mode. Temperature program control: The CTC control system is operated via a dialog PC with TSI software for the heating control of each temperature zone, as well as the activation of the recirculation fans and damper control. Horizontal airflow with reversal: By switching the electronically or pneumatically actuated dampers, the airflow direction can be set from left to right or right to left. The airflow direction for each of the 3 zones can be independently adjusted. Vertical airflow: By shifting a cover plate in the oven ceiling. Useful floor area: The floor area can be driven on using customer-provided loading trolleys. Recirculation fans: Pgodpfoy H Akrjx Alrol Each zone is equipped with a radial fan. Usable space dimensions: 1300 mm height / 1250 mm width / 1250 mm depth External dimensions: 2490 mm height / 1770 mm width / 1810 mm depth Volume: 2000 liters Connection rating: 400V(N)PE AC 50/60 Hz 22 kVA Rated current: 32 A Power: 18 kW Nominal temperature: 50 to 150°C Weight: 1000 kg Condition: used Scope of delivery: (See photo) (Specifications and data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), fuel type: electric, color: other, overall weight: 14,750 kg, Year of construction: 2026, Jaw Crushers generally crushes 150 to 300 tons per hour, according to their capacity. Higher capacity jaw crushers can be produced according to customers needed. The jaw crushers are generally used to crush the hardest rocks such as basalt, granite, and gabbro. With its strong and durable jaw structure, it has been one of the most preferred crushers of the mining industry for many years. With jaw adjustment you can get the desired product and desired capacities very well. It can be easily adjusted by its hydraulic pistons. Podpfx Aloy Dpldorjgl GENERAL SPECIFICATIONS AND FUTURES: -Belt-pulley drive system -Jaw Plates manufactured from custom made cast high manganese steel with a high level of wear resistance -Eccentric shaft manufactured from Cr, Ni, Mo alloyed forged steel -Adjustable jaw opening with hydraulic setting -Utilizing toggle plates for safety purposes in case of overloading -The surfaces which exposed to abrasion are coated with lining plates TECHNICAL SPECIFICATIONS: • Model: FABO CLK 1160 • Type: Primary Jaw Crusher • Inlet Dimensions: 1000 X 600 mm • Jaw Opening: 40-140 mm • Max Feeding: 600 mm • Capacity: 150 to 300 Ton Per Hour • Motor: Heavy duty GAMAK, 90 Kw • Bearings: Heavy duty SKF-FAG • Weight: 14750 kg • Dimension: 2730 x 1326 x 1082 mm • Including motor and safety guards. *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2007, operating hours: 3,000 h, fuel type: diesel, gearing type: automatic, Equipment: head guard, Palfinger F3 150 truck-mounted forklift Pgedpfx Alsullmworel Own weightfrom 1,580 kg (without forks)max. Lifting height 2,200 - 3,100 mmmax. Lifting capacity/load capacity1,500 kg / 600 mm Engine 3-cylinder diesel engine

Condition: as good as new (ex-display), Year of construction: 2026, power: 1.5 kW (2.04 HP), S&F Oscillating Screen | Screening Machine Type ASM-150 Demonstration Machine Make: S&F GmbH Type: ASM-150 Screening capacity: approx. 15 - 25 m³/h (depending on material) Fractions: 3 Screening surface: 1.5 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 1.5 kW, 3 x 400 V, 50 Hz L x W x H: 2,700 x 1,500 x 1,300 mm Design: TopLine Machine weight: approx. 1,200 kg Machine colour: RAL 7043 Traffic Grey B // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips Podoy Sixmopfx Alrogl - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: used, Year of construction: 1984, x-travel 7000 mm y-travel 3000 mm z-travel 1200 mm W-axis (spindle longitudinal) 500 mm spindle diameter 150 mm quill: 380 x 380 mm Plate dimensions 4x 5000 x 2000 mm powered rotary table 1600 x 1600 table load of rotary table max. 10 t travel on the bed 1500 mm tool taper SK 50 turning speeds 2,5 - 1000 U/min power capacity - milling spindle 30 kW weight of the machine ca. 62 t used manual horizontal borer with plate field - digital scale - tailstock - moveable vertical milling head Pgodjyz Db Ijpfx Alrel - movable turn table

Condition: new, functionality: fully functional, mileage: 3,000 km, power: 206 kW (280.08 HP), first registration: 01/2026, fuel type: diesel, overall weight: 15,000 kg, tire size: 14.00 R 20, axle configuration: 4x4, wheelbase: 4,150 mm, fuel: diesel, brakes: engine braking, color: beige, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: parabolic leaf (spring), Year of construction: 2023, Equipment: ABS, air conditioning, all wheel drive, compressor, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, NEW VEHICLE with day registration on 05.01.2026! *WARRANTY EXTENSION available optionally for up to 5 years from first registration! Pedpsy Slk Ssfx Alrogl In addition to the standard equipment, the following factory-fitted options are included: - Differential lock on the driven front axle - Rear axle ratio: i = 5.72 - Spare wheel, dimensions match chassis tires - 170 Ah batteries for Eurocargo - Mechanical battery isolator mounted to the chassis at the battery box - Alternator 2880 Watt (24 Volt x 120 Amp) - Voltage converter 24/12 Volt (10.5 Amp) - Preparation for toll system (OBU), includes third DIN slot, antenna, and wiring in dashboard (without on-board unit) - Front and ramp mirrors are manually adjustable but heated - Luxury passenger seat, 4-way adjustable, air-sprung, integrated headrest and seatbelt, heated, lumbar support - Compressed air connection in engine tunnel console - Electronic immobilizer and third vehicle key - Luxury driver's seat, air-sprung, heated, multi-way adjustable, lumbar support and headrest, with integrated 3-point seatbelt - Iveco radio DAB+, Bluetooth, integrated microphone, mini-USB/AUX input, LCD display - Air conditioning with manual controls - Multifunction steering wheel with steering wheel controls - Pollen filter for cab - Exterior mirrors for body width 2500 mm - Tinted windscreen and side windows - Headlamp protective grilles - Sunblind rollers for side window (driver and passenger side) - Sun protection film integrated into windscreen - Diesel/air parking heater with timer (Eberspächer, AirTronic D2), thermal output 2.2 kW - Preparation for roof beacons - Trailer socket for 12 Volt operation, 13-pin - Trailer socket for 24 Volt operation, 15-pin - Adapted exhaust tailpipe for water fording - Plastic fuel tank, lockable, 200-liter capacity - Pre-fuel filter type Racor with separator, heated - Aluminum air reservoirs, number varies by suspension and trailer configuration - Parabolic spring front suspension - Parabolic spring rear suspension - Rear cross member for central axle trailer, D = 190 kN - Side exhaust tailpipe, left - CAN-bus interface 'CAN-OPEN' for body control - 360 ccm air compressor, recommended for trailer operation with full air brake system - MICHELIN XZL+ 14.00 R 20 off-road tires - Color: Light Ivory, IC 074, similar to RAL 1015 Purchase / Financing / Hire Purchase / Leasing / Rental possible. Subject to errors and prior sale! Images may include chargeable optional equipment! Delivery date by arrangement! Viewings by appointment only! Address is office only, not the vehicle location! Our Terms and Conditions apply!

Condition: new, functionality: fully functional, power: 250 kW (339.91 HP), fuel type: electric, color: other, overall weight: 21,450 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE PDK Series Primary impact crusher is a rotor type crusher and an expert in crushing less abrasive materials with medium hardness with very high reduction and cubical ratio. Primary impact crushers can be preferred for crushing large sized stones and it lowers secondary crushing requirement in entire systems. PDK series impact crushers deliver unbeatable performances in primary, secondary and tertiary applications. The crusher consists of two parts, body opening and adjustment systems operate easily with the hydraulic power unit thus provides an advantage for easy maintenance and minimum stopping for a constantly work. We produce PDK crushers as Mobile Primary Impact Crusher and Stationary Primary Impact Crusher. General Specifitions and Futures: • High capacity • High reduction ratio • Wear surfaces are protected by solid-filler electrode welding • Hammers and crushing plates are manufactured from high manganese steel casting • Inner surfaces of the crusher is coated with wear resistant lining plates • Wide intake with chain curtain due to protection from back-leaping • Hydraulic setting system TECHNICAL SPECIFICATIONS • Model: FABO PDK-150 • Type: Primary Impact Crusher • Rotor Size: 1200 x 1500 mm • Max Feeding: 800 mm • Capacity: 300-600 TPH Psdsy A Ew Hepfx Alrogl • Motor Power: Heavy duty GAMAK,315 kW Bearings: Heavy duty SKF-FAG • Speed: 750 rpm • Weight: 25300 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, Robust shut-off and check valves in various designs – ideal for industrial applications in water, air, and material handling technology. These high-quality valves impress with their sturdy construction, reliable sealing, and ease of use. Perfectly suited for maintenance, replacement, or expansion of existing systems. Various sizes and models available. Immediately ready for use and in good condition. 8x 150 DN 16 PN EBRO Pgedpfxjy Smtns Alrol 2x 125 DN 16 PN EBRO 3x 150 DN 16 PN JET

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Pjdpfjg Dvdcox Alrjgl Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process Pgodox Ebzqopfx Alrol - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WPC, YEAR OF MANUFACTURE 2012 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVELS X 600 Y 450 Z 450 B +45º/-120º C n x 360º SPINDLE 20,000 RPM, 36 KW, HSK-A63 (NEW) SCALES ON X, Y, Z 220-TOOL CHANGER Pjdpfxjy Twcco Alrogl 7-PALLET CHANGER DYNAFIX 280 x 280 MM TOOL MEASUREMENT PROBE PART MEASUREMENT PROBE PAPER FILTER SPINDLE COOLING UNIT

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WORKPARTNER SYSTEM 3R, 115 POSITIONS, YEAR OF MANUFACTURE 2014 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: X 600, Y 450, Z 450, B +45º/-120º, C +360º SPINDLE 20,000 RPM, 36 KW, HSK-A63 Pgodpfx Aoy Twa Uolrsl LINEAR SCALES IN X, Y, Z 220-TOOL CHANGER ROBOT SYSTEM 3R WITH 115 PALLETS TOOL MEASURING PROBE WORKPIECE MEASURING PROBE PAPER FILTER SPINDLE COOLING SYSTEM

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 1350U TRIPALET, YEAR OF MANUFACTURE 2011 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: Z 1350 AND 1150, Z 895, A +16°/-120°, C x 360° SPINDLE: 24,000 RPM, 38 KW, HSK-A63 (NEW) TABLE: DIAMETER 1100, MAXIMUM LOAD 1600 KG 46-TOOL CHANGER 3-PALLET CHANGER, 1000 x 840 MM RENISHAW OMP60 PART PROBER LASER TOOL MEASUREMENT Podpfxey Tv Nbe Alregl CHIP CONVEYOR WITH TSC MACHINE WEIGHT 19,000 KG

Condition: used, Year of construction: 1990, pressure 150 t distance between table / ram 660 mm table surface area 1500 x 610 mm diameter of seal 150 mm range L-W-H 1,7 x 1,5 x 2,3 m C-frame press - hole in table Ø 120 mm Pgsdpfx Aley Erv Iorel

Condition: excellent (used), For sale is a set of steady rests for a Schaublin 150 lathe. Very good condition. Includes a set of 3 roller jaws. Price is for the complete set. Shipping available or collection in 5023 Salzburg. Pjdpsy Rdaijfx Alrjgl

Condition: excellent (used), machine/vehicle number: 511.1012.471, Cutting Area Length: 150 cm Psdpjxugxtsfx Alrogl Max Cutting Thickness: 0,6mm Equipment / Additional information: ELECTRO TRIM professional electric paper cutter. Made in Italy, realized to cut various materials such as paper, acrylic film, photo-film, photographic paper. Electro Trim is equipped with a hardened steel rotary blade cutting head, mounted on a sliding tube. The metal parts are powder-coated which ensure high resistance to cuts and scratches. The standard model includes a support for positioning on the ground with adjustable feet, the paper collection curtain for paper waste and a lamp that lights up the cutting area.

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 3.65-00001, WITH COUNTING STATION Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: Psdpfspr Ut Nsx Alrogl -Infeed conveyor -Machine -Counting station -Discharge belt

Condition: ready for operation (used), functionality: fully functional, BEHR ST 150 / Vertical slotting machine with swiveling head - Stroke up to max. 175 mm - Head tilting in both directions, 5-8 degrees each - Table height / lower edge of ram guide: 260 mm - Rotary table diameter: 340 mm - Table longitudinal travel: 320 mm - 3 stroke speeds: 17-54-108 strokes per minute - Maximum slot width up to 26 mm - Feed in X/Y axes, speed adjustable - Rotary table adjustment manual - Three-jaw chuck Pgedpey R S Rvofx Alrjl Dimensions (LxWxH): 1.5x1.2x2 meters / Weight: 1600 kg Errors and omissions excepted.

Condition: excellent (used), Description Technical data: Product number PVL 150 B Motor power: 2 kW Capacity: 146 m3/h Max vacuum: 5 mbar Noise level: 74 dB Rotational speed: 1500 rpm Weight: 150 kg Dimensions [H x L x W]: 711 x 381 x 310 mm The pump achieves a vacuum of 5 mbar, confirmed by measurement on the sensor in the attached video below. Pump in very good condition New oil Podpjy H Sxlsfx Alrsgl New oil filter Oil-lubricated vacuum pump, suction unit – a device used in technology for the removal of gases (creation of vacuum) in an enclosed space. Pumps are categorized based on operating principle as: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters for vacuum pumps are: Ultimate pressure (the lowest pressure achievable by the pump), Pumping speed and its dependence on pressure, Capacity (usually measured in m3 of gas pumped per unit of time).

Condition: used, functionality: fully functional, machine/vehicle number: VF6JKSC0000001874, mileage: 3,07,049 km, first registration: 12/1994, fuel type: diesel, empty load weight: 3,000 kg, maximum load weight: 4,500 kg, overall weight: 7,500 kg, tire size: 205/75 R 17.5, tire condition: 80 %, axle configuration: 4x2, wheelbase: 2,700 mm, fuel: diesel, energy efficiency: E, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro1, suspension: steel, number of seats: 2, total length: 5,200 mm, total width: 2,160 mm, total height: 2,600 mm, Year of construction: 1994, Equipment: fog lights, tachograph, truck registration, VEHICLE ALREADY DEREGISTERED FOR EXPORT BODY FITTING COMEAR – HYDRAULIC WINCH – FORKS – TELESCOPIC ARM – ACCESSORIES 3 SEATS – ABS – HYDRAULIC SYSTEM – RADIO/CD – ELECTRIC WINDOWS – AIR SUSPENSION/COMFORT SEAT – ALL VEHICLES FOR SALE CAN BE INSPECTED AND CHECKED, ALLOWING THE CUSTOMER TO CHOOSE THE PREFERRED TYPE OF REFURBISHMENT. OUR SALES STAFF ARE AVAILABLE FROM MONDAY TO FRIDAY FROM 8:30 AM TO 6:00 PM AND ON SATURDAY FROM 8:30 AM TO 12:00 PM. FOR ARRIVAL BY CAR, TAKE THE A31 THIENE MOTORWAY EXIT. BY TRAIN, GET OFF AT THIENE FS STATION. Pedpfx Aljy Rfk Asregl

Condition: new, functionality: fully functional, power: 420 kW (571.04 HP), color: other, Year of construction: 2026, Equipment: cabin, The CONSTMACH JS-2 mobile crushing plant is designed to efficiently crush low and medium hardness materials such as limestone, river stone, dolomite, and basalt. With its compact design, powerful crusher combination, and mobile ease of use, the JS-2 delivers maximum performance across various production areas. The plant performs the primary crushing process with the CJC-90 jaw crusher, while the CSI-1212 secondary impact crusher in the second stage ensures a perfect cubic-shaped final product. This feature delivers ideal results, particularly for concrete production. The JS-2 is equipped with a vibrating feed bunker, bypass belt, hydraulically supported mobile chassis, PLC-controlled automation system, and optional diesel generator set. The system is easy to install, can be put into production quickly, and can be operated without the need for a crane or loader when required, thanks to its hydraulic opening mechanisms. Furthermore, all components are from reliable brands such as SIEMENS and SCHNEIDER, ensuring long-term use. JS-2 Mobile Crushing and Screening Plant Technical Specifications Production Capacity: 150–200 tph Maximum Feed Size: 900 x 650 mm Feed Height: 5.7 meters Main Configuration: Jaw Crusher + Secondary Impact Crusher + 3-Tier Screen Total Motor Power: 355 kW Electric Generator Requirement: 700 kVA Plant Weight: 80 tons Plant Dimensions: 1. Chassis: 11 x 3.4 x 4.4 m / 2. Chassis: 18 x 3.65 x 4.5 m Chassis Type: Hydraulic folding legs, wheeled dual chassis Pgodpfx Aoxpv R Ijlrjl Why Choose the JS-2 Mobile Crushing Plant? CONSTMACH JS-2 stands out from its competitors with its durability, high efficiency, and portability. Thanks to its advanced automation system, it can be easily controlled by a single operator. High-quality European components offer low maintenance costs and a long service life. Delivering reliable performance in all site conditions, JS-2 will more than pay for your investment for many years to come. For those seeking quality, reliability, and engineering excellence in a mobile crushing plant, CONSTMACH is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.