Used Ibc Artb 200 200X300X45 for sale (16,540)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: Fpedey Hkd Hopfx Ap Dsn - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, table length: 1,500 mm, table width: 130 mm, overall weight: 450 kg, grinding height: 200 mm, input frequency: 50 Hz, - Used machine - Year of manufacture: 1998 - Condition: well-maintained, CE marking TECHNICAL SPECIFICATIONS: - Dimensions of the sanding belt: 2300 x 200 mm - Dimensions of the grinding surface: 800 x 230 mm - Belt speed: 8 / 12 m/s - Dimensions of the work table: 1500 x 130 mm - Dimensions of the tilting work table: 150 x 130 mm - Tilting angle of the work table: 0 – 45 º - Working height: 870 mm - Diameter of the drive roller: Ø 140 mm - Diameter of the guide roller: Ø 90 mm - Motor power (2 speeds): 3 kW - Motor power for oscillation: 0.22 kW - Diameter of the dust extraction nozzle: Ø 160 mm - Overall dimensions: 1500 x 900 x 1600 mm - Weight: 450 kg Fsdpfxozinlwe Ap Djpn

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fodszd Eurepfx Ap Djpn FABO manufactures and installs stationary type stone crushing and screening plants according to customer requirements. Production capacity of our stationary plants differs from 100 to 1000 ton per hour. 150-200 Tons/hour capacity of Screening & Washing Plant: - 30m3 Sand Feeding Hopper -1600x5000mm Vibrating Screen - STE 1224 Dewatering Screen & Hydrocyclone - Conveyor Belts - Control Cabin, Electrick Panel and Cables FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO manufactures and installs stationary type stone screening & washing plants according to customer requirements. Production capacity of our stationary plants differs from 100 to 1000 ton per hour. 200-350 Tons/hour capacity of Washing and Screening Plant: - Riverstone Feeding Bunker - 1300x4000x2 Decks Vibrating Screen - 2000x6000x4 Decks Vibrating Screen with washing system - 1500x4000mm Dewatering screen with Hydrocyclone - Conveyor Belt System - Control Panel and Automation System FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!! Fedpfozd Eviex Ap Dopn

Condition: used, Year of construction: 1996, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 434 mm Control Siemens Sinumerik 840D total power requirement 54 kW weight of the machine ca. 10 t dimensions of the machine ca. 6000x2800 mm Spindle speed (max): approx. 0–4500 rpm Spindle speed (max): approx. 0–4500 rpm Spindle bore: approx. 65 mm Spindle taper: mostly DIN 55026 A6 / ISO taper X-axis travel: approx. 220 mm Z-axis travel: approx. 950 mm Feed rate: approx. 25 m/min Tools & equipment Tool turret: usually 2 turrets with ~12 tool positions Powered tools: possible depending on equipment Tailstock: optional, often NC-controlled (SK30) Fedpfezrzxijx Ap Dspn

Condition: used, mileage: 3,547 km, gearing type: other, fuel type: electric, color: red, first registration: 08/2016, emission class: none, suspension: other, Year of construction: 2016, operating hours: 3,547 h, driver cabin: other, fuel: electricity, For sale is a BT LPE 200/8 in red, first registered in August 2016. With only 1,728 km on the odometer, the vehicle is in very good, well-maintained condition and is ready for immediate use. The BT LPE 200/8 impresses with its reliable technology and easy operation – ideal for warehouses, industrial facilities, or logistics companies. Sale only to commercial businesses (agriculture, freelancers, small and Fpedpfezvhyhjx Ap Don large businesses) or for export. Subject to errors and prior sale.

Condition: used, mileage: 2,511 km, gearing type: other, fuel type: electric, color: red, first registration: 08/2016, emission class: none, suspension: other, Year of construction: 2016, operating hours: 2,511 h, driver cabin: other, fuel: electricity, For sale is a BT LPE 200/8 in red, first registered in August 2016. Fsdpfx Apozvhyne Djpn With 2,540 km on the odometer, the vehicle is in very good, well-maintained condition and is ready for immediate use. The BT LPE 200/8 impresses with its reliable technology and easy operation – ideal for warehouses, industrial facilities, or logistics companies. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic ejector • Side air valve • Robot interface • 4-zone mold temperature control system Machine Benefits Fpsdpfx Apezw Atlj Don Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, FTNON-JBT MOP-200 onion peeling machine + SRI-200 sorting table For sale: an FTNON-JBT MOP-200 industrial onion peeling machine, complete with the accompanying FTNON-JBT SRI-200 sorting table. Fjdpfx Ajzw A R Rjp Depn The equipment is suitable for industrial onion processing and can be used for inspecting and sorting the product after the peeling process. The two machines can be operated as part of a technological line. Machine details: Manufacturer: FTNON-JBT Type: MOP-200 onion peeling machine Type: SRI-200 sorting table Type: with onion feeding hopper Application: industrial onion peeling and sorting Stainless steel, food-grade design Suitable for industrial use Sold together with the sorting table connected to the onion peeling machine. The machines are in used condition. Viewing is possible by prior arrangement. The equipment is primarily recommended for food processing plants that want to expand their onion processing capacity or supplement their existing technological line. Additional technical data, photos, and information are available upon request.

Condition: good (used), Round brush, grinding wheel, chip brush, wire brush Fodpfjzuap Sox Ap Dspn -Round brush: Steel wire brush, 200 pieces -Outer diameter: 126 mm -Width: 35 mm -Bore diameter: 13 mm -Submission/Price: complete -Weight: 0.5 kg/piece

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, Equipment: documentation/manual, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Fpedjzv Sfbspfx Ap Don Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: excellent (used), Year of construction: 1998, CAZENEUVE CT 200 CNC lathe CNC NUM control Year 1998 Fpodpjy S T N Asfx Ap Den

Condition: ready for operation (used), Allmatic-NC LC 160/200 Machine Vice Stage 1 = 15 kN Stage 2 = 30 kN Stage 3 = 45 kN Stage 4 = 60 kN Pressure sensor is not included in the scope of delivery! You are welcome to come by for an inspection. We can also organize an affordable shipping service for you! You will receive a proper invoice. Fjdpfx Apoyilc So Djpn A net invoice can also be issued for foreign customers, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers as well. All specified company names and trademarks are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the item description are possible and reserved.

Condition: used, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg Fpsdpexaavpofx Ap Den dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397092

Condition: new, 6.0 mm ST 40 3.0 mm VA 30 - 140 Grad blade length 200 x 200 mm Fpedjxcuybepfx Ap Den table: 900 x 990 mm work height max. 940 mm Punching capacity 35.0 in 6.0 mm ST 40 Throat / punching unit 135 mm engine output 4.0 kW weight 1020 kg range L-W-H 900 x 990 x 1200 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - hydraulic Notching machine with adjustable angle & punching station - 1 set of cutting knives - Round punch with die 12 mm - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop

Condition: new, square edge steel 20x20 / 25x25 mm flat steel 100 x 7.0 mm round bar steel 22.0 / 27.0 mm L-beam 100 x 10 mm weight of the machine ca. 33.0 kg. range L-W-H 900 x 430 x 310 mm Features - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - Bending performance "cold" : Flat steel 100 x 7 mm 65 x 12 mm Round steel 22.0 mm Square steel 20 x 20 mm Angle steel 100 x 10 mm - - - - - Bending capacity "hot" : Fjdpfxexcuyhj Ap Dopn Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 15 mm - - - - - Scope of delivery - Bending plate - Angle stop stepless - Clamping block with eccentric clamp - Material stop

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-250-75-2227, input frequency: 50 Hz, input current: 21 A, For sale: a powerful, compact, vertical CNC drilling machine by HOMAG. Used in the production of custom-made furniture, regularly serviced, and in very good condition. Ready for immediate use. Fodpfx Apjzvxz Ae Dopn Key information and technical condition: Model: Drillteq V-200 / Optimat BHX055 Year: 2020 Workpiece length (X): 200mm to 2500mm Workpiece width (Y): 70mm to 850mm Workpiece thickness (Z): 12mm to 60mm Safe clamping system protects delicate panel surfaces Power supply: 400V (3 phases), 50Hz

Year of construction: 2025, condition: new, Vertical filling machine for liquids into 3-side-seal- or pillow-bags. Including liquid dosing device (for high viscosity liquids). Twin filling layout for high capacity. Can be linked to CIP system to have an automatic circulating system to guarantee clean feeding pipes. The packaging material is sterilized by UV lights inside the machine to assure a clean environment for the packaging material and the liquid product. Contamination of the liquid product can be reduced during the packaging process to have a longer shelf life. - Specifications: max. speed of the machine in neutral: 100 cycles/minute; suitable for volumes from 200-1000ml; accuracy: +/- 1.5%; max. film width: 320mm; bag width: 100-160mm (depending on pouch type); bag length: 95-165mm; 0.7m³, 6bar; 380V, 3.9kW; machine dimensions: 1700x1100x2950mm; weight: 720kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Fjdpfjv Nmznox Ap Dspn

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Screw diameter: 30 mm Fsdpjvygh Njfx Ap Depn Weight: 3,200 kg Available immediately from stock

Condition: like new (used), Year of construction: 2021, operating hours: 400 h, functionality: fully functional, machine/vehicle number: EK210083, total length: 1,500 mm, total height: 2,250 mm, total width: 2,000 mm, pressure: 200 bar, type of input current: three-phase, empty load weight: 250 kg, input voltage: 400 V, fuel: electricity, input frequency: 50 Hz, EKINSA LAVA GRG industrial automatic washing machine, model ET115, year 2021, designed for cleaning the interior and exterior of GRG/IBC tanks. It features an automatic interior washing system with a rotating head and nozzles, as well as an exterior washing system. It can operate in manual and automatic modes via an HMI screen. It includes a water tank with level control, thermostat, and heating elements. Electrical supply: three-phase 3×400 V + N, 50 Hz. Power rating as specified by the manufacturer: 15 kW. Manufacturer: EKINSA Model: ET115 Reference: ET115.21-50.E1 Serial number: EK210083 Fjdozy Ni Sepfx Ap Dspn Year: 2021 CE marking.

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control/Software MAESTRO Safety cabin (enclosure) of the working head No. 2 Workpieces fixing clamps (for the panels introduction in the working area Fpodpszza Sgefx Ap Dsn Minimum workpieces dimensions (X - Y - Z) mm 200 x 50 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 1300 x 95 WORKING GROUPS: No. 1 Drilling head (5-sided with Ro.Ax. roto-axial technology) F31LTC with spindles: - No. 24 Independent vertical boring spindles - No. 11 Independent horizontal boring spindles (6 in X + 4 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 125 No. 1 Vertical electro-spindle (HKS63) power Kw 6,6 Automatic Tools Changing System - Tools storage plate (No. 6 folds-positions) OPTIONAL: Panel loading robot + Robot for unloading machined panels

Condition: new, Year of construction: 2025, Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 200-600kg/h (with max. 5m conveying distance);housing: stainless steel 304; required compressed air: 0.6 MPa; air consumption: approx. 15L/min; power supply: 220V; power consumption: 2.2kW. Fpsdpfx Apsv Nnkdj Den Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2026, machine/vehicle number: FGWPEP48ERPC03709, fuel type: diesel, power: 160 kW (217.54 HP), motor manufacturer: Perkins 1106A-70TAG3, General information Field of application: Construction Weights Empty weight: 1.548 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 251 x 101 x 164 cm Fedpfxowafzmj Ap Dspn CE mark: yes Other information Fuel consumption: 30,7 L/Hour at 75% Load Prime Generator: FG Wilson FGL30120 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 394 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: used, machine/vehicle number: 008170, X axis working area: 4300 mm Y axis working area: 2250 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Fpsdpfxox A Tcuo Ap Den Total number of drilling spindles: 12 Total number of tool changer positions: 14

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 307 mm, turning diameter: 250 mm, spindle bore: 51 mm, travel distance X-axis: 185 mm, travel distance Z-axis: 370 mm, Key figures at a glance: 250 mm maximum turning diameter, 420 mm swing over bed, 307 mm maximum turning length, 51 mm spindle bore, 4000 rpm maximum spindle speed, 5.5/7.5 kW main motor, Fjdpfx Apjzr Ir Ae Dspn an 8-station turret, 185 mm X-axis travel and 370 mm Z-axis travel. The year of manufacture is 2004 and the control system is a Fanuc Series 21i-TB. The machine plate states a supply of 220 V, three phase, 50/60 Hz, 42 A and a maximum power supply of 16.1 kVA, with control voltages of 100 V AC and 24 V DC. Buyers on a 400 V network should plan for a matching transformer. The approximate footprint is 1600 x 1280 x 1890 mm at a weight of around 2800 kg