Used Infrared Vortex-Evaporator for sale (620)

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,000 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530 HSCI, table load: 1,000 kg, overall weight: 5,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis Avia VMC 1000 was manufactured in 2017. It features a generous X-axis travel of 1000 mm, Y-axis travel of 540 mm, and Z-axis travel of 620 mm. The machine is equipped with a robust table size of 1200 x 540 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the Avia VMC 1000 vertical machining centre we have for sale. Contact us for further details. • Table size: 1200 x 540 mm • Spindle-to-table distance (min/max): 150 / 770 mm • Working feed: 0–35 m/min • Rapid traverse (X/Y/Z): 35 / 35 / 35 m/min Gsdpezcyx Refx Apwoka • Spindle motor power (S1 100% / S6 25%): 10 / 17 kW • Condition: Machine in top condition with very low hours Additional equipment • Spindle through-coolant, 20 bar • 4th axis preparation with 200 mm table, base, and 3-jaw chuck • Heidenhain TS 640 infrared workpiece probe • Heidenhain TT 160 tool probe • Oil mist collector (Mistresa, Japan) • Tool cooling with compressed air, 5 bar • Coolant oil separator Technical Specification Taper Size ISO 40

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, !!! Calibrated, comes with decontamination mode !!! Overall Dimensions - inches (mm): Model NU-5510/E Height: Exterior: 39.5 Inches (1003.3mm) Width: 25.5 Inches (647.7mm) Depth: 26.5 Inches (673.1mm) Height: Interior: 25.5 Inches (647.7mm) Width: 21.5 Inches (546.1mm) Depth: 21.0 Inches (533.4mm) Shelf Capacity: Size: 19.25 Inches (489mm) x 19.25 Inches (489mm) Performance Parameters - Temperature Range: 18°C to 55°C (5°C above ambient to 3°C ambient max.) - Temperature Uniformity: +0.3°C at 37°C. - Temperature Accuracy: +0.1°C. - Minimum Temperature for 145 DEG Cycle 135°C Decontamination: 95 DEG Cycle 87°C - CO2 Range: 0.1 to 20%. , CO2 Accuracy: +0.1% , CO2 Recovery: Up to 5% +0.2% in 4 minutes. - Temperature Recovery: 0.3°C/min. (Average) - Temperature Display Resolution: 0.1°C , CO2 Display Resolution: 0.1% - Door and Perimeter Heater Control Logic: Proportional 0-100% (adjustable) , Door & Perimeter Heater Duty cycles are processor controlled. , Temperature Sensor Type: Precision Integrated Circuit - CO2 Control Logic: Fixed Algorithm/Manual Environmental Adaptable. , CO2 Sensor Type: Infrared , Connectors on rear panel are provided for chart recorder, remote alarm, and printer connection. Gkjdpfx Aoxbdt Ijpwsa

Condition: ready for operation (used), functionality: fully functional, !!! We have a shipment of 11 pcs coming in. Price is for one pc only !!! Specially designed for rotary evaporators, distillation, filtration, vacuum ovens and vacuum drying. With chemical-resistant diaphragm vacuum pump and vacuum controller VCpro600. To ensure a freely selectable vacuum of ±1 mbar, the pump speed is continuously adapted to the gas load. Advantages: Faster process results are ensured by constant evaporation and degassing Automatic vacuum adjustment and control Controller with large, multilingual colour display and light/dark screen mode for optimum visibility Integrated solvent library with stored distillation-specific parameters and freely adjustable boiling points; storage of individual pressure curves for novel processes possible Gkedpfx Apewvluxswea With communication interface for remote control/monitoring, for downloading logged process data and for software updates Low-noise operation through speed reduction Technical Information Type LVS 105 T-10 ef+ System LVS 105 T-10 ef+ Suction capacity (l/min) 18.0 End vacuum (abs.) 2,0 mbar Connection for hose inner Ø 8 mm Materials in contact with media pump head: PTFE with carbon fibre reinforcement diaphragms: elastomer with PTFE coating valves: PEEK seals: EPDM screw fittings/connecting elements: PP, PVDF vacuum hose: PTFE Port RS 232, LAN W x D x H 250 x 260 x 435 mm Weight 9,5 kg Mains connection 115-240 V, 50/60 Hz Good working condition. Please check our our other listings as well.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, 3-axis-Bed Type Milling Machine - Universal | Brand: AUERBACH | Type: FBE 2000 Year of manufacture: 2002, complete overhauled by the manufacturer in 2015 The complete overhaul in 2015 included, amongst other things, the disassembly of all axes, cleaning, reassembly and recommissioning. The machine can be inspected under power by appointment. Condition: Very well maintained / ready for use. Operating hours (July 13, 2026): approx. 40.000 h Last maintenance carried out in 2025, at 36.250 operating hours. TECHNICAL SPECIFICATIONS: Travels: - X-axis: 2.000 mm - Y-axis: 1.000 mm - Z-axis: 900 mm Dimensions / Weight: Dimensions W/D/H: 5,5 (7,15 including chip conveyor) x 4,1 x 2,7 m Machine weight: 13 tons EQUIPMENT: - CNC control system: Heidenhain TNC 426 - Universal milling head (mechanically swivelling), Brand: SEMPUCO, KFU-2/45/021 - Spindle speed: 3.500 rpm Gkodpfszmn Ruox Apwsa - Tool magazine: 46 positions - Tool holder: SK 50 - Electronic handwheel - 3D infrared measuring probe, brand: m&h Hexagon - Table load: 6 tons - 5 x 22 T-slots in the milling table - Chip conveyor with coolant system - Large air-conditioning unit control cabinet - Drive motor for the Z-axis (spare part) - Documentation in German No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) Gjdpfx Aog Ailcjpweka COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,377 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Gksdpfxjzmrpuo Apwoa Travel range, Z-axis: 500 mm Speed range: 0–20,000 rpm Speed control: stepless Magazine capacity: 30 Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 900 × 600 mm Operating hours Machine operating hours: 54,796 h Spindle operating hours: 23,462 h Program run time: 20,377 h EQUIPMENT Fixed tilting table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Condition: excellent (used), Year of construction: 2019, operating hours: 21,500 h, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 355 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece length (max.): 470 mm, workpiece width (max.): 400 mm, workpiece weight (max.): 500 kg, total height: 2,431 mm, total length: 2,069 mm, total width: 2,328 mm, table load: 500 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 9,500 h, distance table to spindle center: 495 mm, spindle motor power: 13,000 W, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, Milling spindle HVC140 HSK-E40 - Milling power S1/S6 40%: 10kW/13kW. Ceramic ball bearings with minimum oil air lubrication. Tool Changer 16 positions for HSK40E (tools until diam. 16 mm and maximum length of 75 mm. Tool measurement with Blum laser (annex on the left) with lasersystemm including tool breakage control. For measurment rotating tools of dia. 0,2 mm by dia. 16mm in the machine. Minimum tool length 45 mm. Tool presenting lapse. Preparation for graphite- extraction L-CUT for vacuum extraction system, consisting of enclosure, roof and pipe union. Graphite extration system. Included preparation for graphite extraction. Air throughput rate approx. 1400 m3/h. Motor output 2,2 kW, noise level approx. 73 dB (A). Rest dust content in exhaus air= max. 0,5 mg/m3. Dust contents are 15 times lower than the MAK values. Sound absorber fo L-CUT. Reducing of acoustic pressure level for approx. 9 dB (A) Remote control Heidenhain. Manual control with setup functions, electric hand wheel and enable button. Cooling system Hydac for spindle. Automatic lubrication system. Additional LED workroom lamp. Oil mist lubrication unit. Language English (system) Infrared probe Renishaw OMP 400 HSK 40 The machine will be disconnected and dismantled on 16 September 2026. Until then, it will remain connected and in active production. Gkodpfxezpybwj Apwoa In July 2026, the ball screws, including the bearings, were replaced on the X and Y axes. All spindle filters and oil were also replaced. Our company is an authorized Exeron dealer and service partner. Therefore, the machine will be professionally disconnected and prepared for transport. The price also includes professional loading onto the truck and securing the machine on the truck for transport. The machine dimensions do not include the graphite extraction system. The complete layout is provided in the attached document.

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Manufacturer: Thermo Haake Model: C30S Controller: Phoenix II Controller type: 003-6431 Device type: 003-8195 Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Application: The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, cooling and heating of measurement systems, temperature stabilization of liquids. Condition: used, Gedozi Tmaepfx Apwoka functional, controller operates correctly, display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Included in the set: Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Condition: used, mileage: 31,236 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, first registration: 12/2023, emission class: euro6, color: grey, number of seats: 7, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number: 263204 Former non-binding recommended retail price from the car manufacturer: €88,190 1st owner, accident-free, complete service history, non-smoker ---- HIGHLIGHTS & PACKAGES * Trailer hitch, ball head, detachable * Electrically operated left sliding door * Electrically operated right sliding door * Parking package with 360° camera * Auxiliary heater, electric * AMG Line * Mirror package * Driving Assistance Package * BlueEFFICIENCY package * Sleeping package ASSISTANCE SYSTEMS * Blind Spot Assist * Mercedes-Benz emergency call system * Breakdown management * 360° camera * High-beam assist PLUS * PARKTRONIC * ECO start-stop function * TEMPOMAT (cruise control) * Headlamp assist * Rain sensor * Lane keeping assist * ATTENTION ASSIST * HOLD function * Active Brake Assist * Traffic sign assist ENGINE, TRANSMISSION & CHASSIS * 9G-TRONIC * AGILITY CONTROL suspension * Permanent all-wheel drive AUDIO & COMMUNICATION * Instrument cluster with color display * Digital radio (DAB) * Touchpad * Communication module (LTE) for digital services * Burmester surround sound system * Warning light for windshield washer fluid level INTERIOR * AMG rear spoiler on tailgate * Side trim in black, anodized * Automatic climate control system THERMOTRONIC * Seat rail system with quick-release mechanism * Carpet in the rear * First aid kit * Display diagonal 26 cm (10.25 inches) * 12V sockets for rear seats on the right and left * 12V socket in trunk/loading area * Black headliner * Warm air duct to the passenger compartment * Climate zone 1 (cold/comfort) * Carpet in the front passenger compartment * Illuminated Mercedes-Benz lettering on the door sill * Semi-automatic controlled air conditioning, TEMPMATIC in the rear * Heated seats for driver * Heated seats for passenger * Thorax/pelvis sidebag for passenger * Thorax/pelvis sidebag for driver * Windowbags for driver and passenger * Lockable glove compartment * Center console with roller cover * Ambient lighting * Overhead control panel * Reading light in the grab handle in the rear * Footwell lighting in the front * Airbag for passenger * Storage net on the back of the passenger seat * Storage net on the back of the driver's seat * Leather Lugano black * Grab handle in the rear * Comfort passenger seat * Comfort driver's seat * Sports pedals * Switch position, lower control panel * Steering wheel adjustable in height and tilt * Multi-function steering wheel with trip computer * Leather steering wheel * Armrests for seating in the passenger compartment * AMG trim elements LIGHT & SIGHT * LED Intelligent Light System * Tail, brake and turn signal lights in LED technology * Ambient lighting in the exterior mirrors * Ambient lighting on the tailgate * Window, front left, fixed in the side panel/sliding door * Adaptive brake light WHEELS * AMG light alloy wheels 8 J x 19 black * Tires 245/45 R19 * Summer tires * Tire manufacturer Continental (10) TECHNOLOGY & SAFETY * Hill-start assist * Childproof lock on doors in the passenger compartment * Pedestrian protection * Seat belt warning for passenger seat * Exterior and interior mirrors, automatically dimming * PRE-SAFE Gksdpfx Ajzh S Imjpwoa * Tire pressure monitoring system on front and rear axles, wireless * Convenient opening and closing with infrared remote control EXTERIOR * Brake calipers with Mercedes-Benz lettering * Bumpers and attachments painted in body color * Radiator grille painted in black * Side skirts * Roof lining * Exterior mirrors painted in b

Year of construction: 2026, condition: new, functionality: fully functional, CORMAK Compressed Air Dryer is a professional industrial device designed for effective removal of moisture, water vapour, and oil particles from compressed air systems. Using efficient refrigeration technology, the refrigerated air dryer ensures stable operation of compressed air-powered equipment, extending their service life and improving reliability. It is an ideal solution for companies looking for modern compressed air treatment methods in pneumatic installations. Main advantages of the CORMAK compressed air dryer Advanced refrigeration system — the two-stage air cooling process down to the dew point ensures effective separation of moisture and oil particles. Stable operation in systems up to 10 bar — the device is designed for standard industrial compressed air installations. High efficiency — capacity of up to 3800 l/min makes the dryer an effective solution for medium and large compressed air systems. Gjdpfomt Dcqsx Apwoka Energy-saving design — the use of a variable-speed fan reduces power consumption to only 0.9 kW. Automatic condensate drain valve — ensures reliable condensate removal without the need for operator supervision. Compact dimensions and easy installation — ideal for upgrading existing pneumatic systems. Design and technology The refrigerated compressed air dryer has been designed for maximum efficiency and long-term durability. Its main structural components include: 1. Air-to-air heat exchanger During the first stage of the process, incoming compressed air passes through a heat exchanger, where it is pre-cooled by colder air leaving the evaporator. The counterflow design improves heat recovery and increases the overall energy efficiency of the system. 2. Refrigeration system evaporator During the second stage, compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This causes the water vapour and oil particles contained in the air to condense. 3. Condensate separator After cooling, the mixture of air and condensate enters a high-efficiency separator, where condensed water and oil are separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity according to actual operating requirements. This reduces energy consumption and extends the service life of system components. Equipment included Automatic condensate drain valve Integrated water and oil separator Variable-speed fan with automatic adjustment to operating conditions Electronic control system ensuring stable operating parameters Compact and durable housing resistant to industrial environments Technical specifications Parameter Value Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Capacity 3800 l/min Power consumption 0.9 kW Supply voltage 230 V Dimensions (L × W × H) 850 × 480 × 480 mm Weight 59 kg Refrigerant type and quantity R410a, 650 g

Year of construction: 2026, condition: new, CORMAK Compressed Air Dryer is a professional industrial device designed for effective removal of moisture, water vapour, and oil particles from compressed air systems. Thanks to advanced refrigeration technology, the refrigerated air dryer ensures stable operation of compressed air-powered equipment, extending their service life and improving reliability. It is an ideal solution for companies looking for modern compressed air treatment methods in pneumatic installations. Main advantages of the CORMAK compressed air dryer Advanced refrigeration system — the two-stage air cooling process down to the dew point ensures effective separation of moisture and oil particles. Stable operation in systems up to 10 bar — the device is designed for standard industrial compressed air installations. High efficiency — capacity of up to 2800 l/min makes the dryer an effective solution for medium and large compressed air systems. Energy-saving design — the use of a variable-speed fan reduces power consumption to only 0.58 kW. Automatic condensate drain valve — ensures reliable removal of condensate without the need for operator supervision. Compact dimensions and easy installation — ideal for upgrading existing pneumatic systems. Safe R134a refrigerant — provides high operating efficiency while meeting modern environmental standards. Design and technology The refrigerated compressed air dryer has been designed for maximum efficiency and durability. Its main structural components include: 1. Air-to-air heat exchanger Gsdpfxjmt Dcfs Apwjka During the first stage of the process, incoming compressed air passes through a heat exchanger, where it is pre-cooled by colder air leaving the evaporator. The counterflow design improves heat recovery and increases the overall energy efficiency of the system. 2. Refrigeration system evaporator During the second stage, compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This causes the water vapour and oil particles contained in the air to condense. 3. Condensate separator After cooling, the mixture of air and condensate enters a high-efficiency separator, where condensed water and oil are separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity according to actual operating requirements. This reduces energy consumption and increases the service life of system components. Equipment included Automatic condensate drain valve Integrated water and oil separator Variable-speed fan with automatic adjustment to operating conditions Electronic control system ensuring stable operating parameters Compact and durable housing resistant to industrial environments Technical specifications Parameter Value Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Capacity 2800 l/min Power consumption 0.58 kW Supply voltage 230 V Dimensions (L × W × H) 420 × 700 × 690 mm Weight 37 kg Refrigerant type and quantity R134a, 550 g

Condition: like new (used), Year of construction: 2020, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately Gsdpfoy Exrpjx Apwjka The machine line can be delivered immediately, with few operating hours and in new condition. The units of the production line: 1. ￠150mm20D cold feed vacuum extruder(Standard) 2. Rubber sheet head(Pneumatic) 3. 6m infrared curing oven (width 1000mm) 4. 6m hot air curing oven(width 1140mm) 5. 6m hot air curing oven(width 1440mm) 6. 6m hot air curing oven(width 1600mm) 7. 6m hot air curing oven(width 1800mm) 8. 6m hot air curing oven(width 2000mm) 9. 6m hot air curing oven(width 2300mm) 10. 6m hot air curing oven(width 2500mm) 11. 6m hot air curing oven(width 2800mm) 12. 36m (in 3 layers*12m) transmission & cooling system 13. Automatic sheet cutter & trimming machine (one) 2000 mm 14. One large Chiller with water tank 15. Gas heating 16. PLC If you are interested, we will send you a detailed description and data.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 35,000 rpm, number of axes: 5, This 5s FEHLMANN PICOMAX 90-HSC + Erowa automation was manufactured in 2005. It features a table size of 1260x490 mm, with an impressive spindle speed of up to 36,000 rpm and a control system by Heidenhain TNC 530. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 90-HSC + Erowa automation we have for sale. Contact us for further details. • Table size: 1260x490 mm Additional equipment Gkjdpfx Aeyizugspwea • incl. EROWA Robot Multi automation • Item 20 (Article No. 3391-176): 1 Pc. Continuous Path Control Heidenhain iTNC 530M (Standard Base Version) Item 30 (Article No. 3360-181): 1 Pc. Software Option 1 for iTNC 530M (Rotary table machining in mm/min, programming of contours on the cylinder surface, tilting of the working plane, including circular interpolation in 3 axes) Item 40 (Article No. 3360-182): 1 Pc. Software Option 2 for iTNC 530M (3D machining: smooth movement, 3D tool compensation, TCPM, 5-axis linear interpolation, splines, block processing time 0.5 ms) Item 50 (Article No. 3391-211): 1 Pc. Standard Clamping System Item 60 (Article No. 3390-220): 1 Pc. Machine Table 1260x490 with 9 T-slots 12H8, 50 mm distance Item 70 (Article No. 3391-240): 1 Pc. Tool Changing System with 28 magazine slots HSK-E50 Item 80 (Article No. 3390-270): 1 Pc. Side Enclosure of the machining area made of stainless sheet metal, with wide-opening sliding doors at the front and polycarbonate panes. Incl. 2 anti-stroboscopic lights. Right side door manual or optional automatic opening. Item 90 (Article No. 3390-272): 1 Pc. Right Side Door with window, lockable Item 100 (Article No. 3390-275): 1 Pc. Automatic Enclosure Door left to P90 for workpiece loading. Incl. 2 pneumatic cylinders, guides, control valve and control circuit for CNC control. Item 110 (Article No. 3390-288): 1 Pc. Full Enclosure of the machining area towards top (32/28 tools), with lockable recess for loading crane. Item 120 (Article No. 3360-506): 1 Pc. Extended Energy Saving Function via electronic timer. Automatic standby switching of machine drives after completion of NC programs and restart of the plant. Item 130 (Article No. 3360-842): 1 Pc. Oil Mist Extraction System for machining area Item 140 (Article No. 3390-851): 1 Pc. Standard Coolant System 3 bar / 30 l/min with 2 submersible pumps, chip drawer, additional fine chip filter insert and stretch mesh filter. Coolant tank 240 l capacity. Item 150 (Article No. 5130-101 Special): 1 Pc. Preparation for Minimal Quantity Lubrication system. Hoses routed through machine head to spindle. Switchable via M-functions. Item 160 (Article No. 3363-872): 1 Pc. 3D Touch Probe System Renishaw MP 40 incl. spindle insert HSK E50, touch stylus Ø 6 mm, signal transmission wireless via infrared system. Self-calibrating with 360° radiation. Item 170 (Article No. 3390-877): 1 Pc. Laser System NT for high-precision measurement and monitoring of tools D 0.15 to 63 mm. Cycle-supported measurement of diameter and length as well as contour stability. Includes automatic alignment and checking of CNC tool table. Item 180 (Article No. 3360-918): 1 Pc. FEHLMANN HSC Settings (Cycle 327) for dynamic optimization of digital axis drives. Item 190 (Article No. 4875-114): 1 Pc. Automatic CNC Indexing and Swiveling Unit ATS 160 CNC-SDKD--ITSPC in digital execution with Erowa quick-clamp chuck ITS Power Chuck. Center height: 160 mm. Swivel range: +18° to -5°. Max. workpiece diameter: 300 mm. Max. workpiece weight: 50 kg.

Condition: good (used), mileage: 6,25,836 km, power: 118 kW (160.44 HP), first registration: 01/2011, fuel type: diesel, tire size: 205/75R17,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 7,030 mm, total width: 2,600 mm, total height: 3,440 mm, loading space length: 3,580 mm, loading space width: 2,260 mm, loading space height: 2,340 mm, Year of construction: 2011, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, seat heater, = Further Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) Gkedpfeyzx Ddox Apwea - Halogen lamp - Short cab - Manual - Radio/cassette - Fabric upholstery = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 2095 kg, Unladen weight: 5395 kg, Gross weight: 7490 kg, Total tank capacity: 150 liters, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Engine power: 118 kW (158 hp), Fuel: Diesel, Euro standard: 5, Transmission type: Automatic, Gearbox: ZF, Gears: 6, Power steering, ABS, Starter battery, System length: 88 cm, System type: ,,,,, Central locking, Number of seats: 2, Seat configuration: 1+1, Upholstery: Fabric, Seat adjustment: Manual, Cooling unit manufacturer: Konvekta, Cooling unit model: .?, Cooling unit: Refrigeration compressor, Body insulation, Wall thickness: 90 mm, Type of cooling: Refrigeration and freezing, Day/night cooling: Day cooling, Additional evaporator, Spare wheel, Spare wheel tread: 11% = Further Information = Transmission Gearbox: ZF, 6 gears, automatic Axle Configuration Tyre size: 205/75R17.5 Brakes: disc brakes Axle 1: Steered; Tire tread left: 4 mm; Tire tread right: 4 mm; Suspension: leaf spring Axle 2: Twin tires; Tire tread inner left: 5 mm; Tire tread outer left: 6 mm; Tire tread inner right: 5 mm; Tire tread outer right: 5 mm; Suspension: air suspension Weights Unladen weight: 5,395 kg Payload: 2,095 kg Gross vehicle weight: 7,490 kg Functional Loading platform height: 101 cm Cooling unit: engine-driven Wall thickness: 90 mm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification Registration number: BX-XT-09 = Company Information = Kleyn Trucks is one of the world’s largest independent traders in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our offer includes all European brands, years, and price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, fast-changing inventory • Recognized quality • Good pricing • Correct trading practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration quickly organized • Expert technical services • The security of "recognized quality" • And more… Please visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request through our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 2 axles, first registration: 12/2008, loading space length: 11,020 mm, loading space width: 2,500 mm, loading space height: 2,340 mm, total length: 11,800 mm, total width: 2,600 mm, total height: 3,850 mm, suspension: air, tire size: 425/65R22,5, color: other, Year of construction: 2008, Equipment: ABS, tail-lift, = Additional options and accessories = - EBS - Tail lift = Notes = Number of axles: 2, Unladen weight: 8715 kg, Gross weight: 32000 kg, Chassis type: Incomplete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2008, Refrigeration unit manufacturer: Carrier, Refrigeration unit model: Vector 1850, Refrigeration unit: Diesel/electric, Engine hours / electric: 2301, Engine hours / diesel: 7767, Body insulation, Wall thickness: 40 mm, Cooling type: Chilling, Additional evaporator, Axle type: SAF, Tail lift, Tail lift type: Rear tailgate, Tail lift capacity: 2000 kg, Tail lift manufacturer: Bar cargolift, Tail lift material: Aluminum, Tail lift size: 205x255, Battery for ramp. = Further information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tire size: 425/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread left: 11 mm; Tire tread right: 11 mm Axle 2: Steered; Tire tread left: 14 mm; Tire tread right: 14 mm Weights Unladen weight: 8,715 kg Payload: 23,285 kg Gross vehicle weight: 32,000 kg Functional Tail lift: Bar cargolift, rear tailgate, 2,000 kg Refrigeration unit: Diesel and electric (7,767 h diesel; 2,301 h electric) Wall thickness: 40 mm Environment Emission class: Euro 0 Condition Godeypanrspfx Apweka General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offering covers all European brands, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing stock • Verifiable quality • Competitive prices • Professional transactions • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of "verifiable quality" • And more.... Please visit our website for special offers and our full inventory. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry through our website. Ask us directly about our European warranty package.

Condition: used, empty load weight: 9,564 kg, maximum load weight: 26,436 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2018, next inspection (TÜV): 07/2027, loading space length: 13,311 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, total length: 26,000 mm, total width: 40,000 mm, total height: 1,40,400 mm, suspension: air, tire size: 385/55 R22,5, color: white, Year of construction: 2018, front tire size: 385/55 R22,5, rear tire size: 385/55 R22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer Schmitz SCB, type: freezer, operating hours: diesel hours 10,809 / electric hours 3,356, double-deck with beams, electrical connection, color: white, suspension: air suspension with lift function, lifting and lowering, cooling type: on-the-road cooling with diesel drive & stationary cooling, lift axle: 1st + 3rd axle, air distribution channels with distribution mat, pallet box for 36 + 8 pallets, portal door, brake: disc brake, start/stop function, temperature recorder DataCold T 600, cooling unit type: Carrier Vector 1950 Mt d/e, evaporator 2, anti-spray, partition, roof profiles, circulation wall, aluminum floor, double spare wheel holder without wheel, ferry lashing points, remote thermometer, cargo securing rail, 2x 7-pin + 15-pin electrical connectors, digital fuel gauge, side work lights (LED), individual wheel fenders, compressible ramp bumpers (DRP), 2x reversing lights (LED). Gkodpfjzr Rvqox Apwoa

Condition: good (used), mileage: 2,20,352 km, power: 158 kW (214.82 HP), first registration: 07/2017, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 4,400 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: steel-air, total length: 8,400 mm, total width: 2,550 mm, total height: 3,680 mm, loading space length: 6,070 mm, loading space width: 2,370 mm, loading space height: 2,310 mm, Year of construction: 2017, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, seat heater, tail-lift, traction control, - Heated mirrors - Digital tachograph - Tachograph (recording device) - Fixed - Halogen lamp - Short cab - Tail lift - Manual - Rear view camera - Lane keeping assist - Fabric - Blind spot sensor Number of axles: 2, Configuration: 4x2, Unladen weight: 8479 kg, Gross vehicle weight: 14000 kg, Total tank capacity: 260 liters, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 1 ton, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Electric windows, Color: White, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Blind spot sensor, Engine power: 158 kW (212 hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission type: Volvo, Gears: 8, Power steering, ABS, ASR, Body construction year: 2017, System type: Lamberet, Central locking, Seat arrangement: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, Refrigeration unit manufacturer: Carrier, Refrigeration unit model: Supra 750 Mt, Refrigeration unit: Diesel/electric, Unit hours / electric: 558, Unit hours / diesel: 3545, Body insulation, Heater, Wall thickness: 55 mm, Type of cooling: Cooling and freezing, Day/night cooling: Day/night cooling, Additional evaporator, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 1500 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel, Tail lift size: 195 x 245, LAMBERET FRIGO BOX // TAIL LIFT // CARRIER Transmission Transmission: VOL, 8 gears, Automatic Axle Configuration Tire size: 285/70R19.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 9 mm; Tire tread depth right: 10 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 3 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 4 mm; Tire tread depth right outer: 9 mm; Suspension: Air suspension Weights Unladen weight: 8,479 kg Payload: 5,521 kg GVW: 14,000 kg Functional Tail lift: Dhollandia, Rear door, 1500 kg Height of loading platform: 110 cm Refrigeration unit: Diesel and electric (3545 diesel operating hours; 558 electric) Gksdpfozm Nhzox Apwja Wall thickness: 55 mm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing inventory of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in...

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,215 h, travel distance X-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 20,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5 axis MTcut UDS80H-5A was manufactured in 2019. It features a 20,000 rpm spindle, 120 Nm torque, and 35 kW drive power. Equipped with a HSK63 tool holder, 96-position tool changer, and a Kessler rotary tilting table with an 800 mm diameter. Includes Heidenhain TNC 640 control, 15" TFT screen, and Ethernet connectivity. Ideal for precision machining with its Heidenhain glass scales and BLUM laser tool measurement. Contact us for more information about this machine. • Operating hours: Control unit 6,904 h; Machine 5,480 h; Program runtime 2,215 h • Spindle: 120 Nm torque, separate spindle cooling for constant temperature • Tool interface: HSK63 with blow-out function • Rotary table: 800 mm diameter; Kessler rotary tilting table with 2 A-axes and 1 C-axis, direct-drive torque motors • Feedback: Heidenhain glass scales in all 5 axes • Tool changer: 96 positions with double-arm gripper • Control: 15" color TFT screen • Connectivity: Ethernet interface, 2x USB ports • Control functions: Plain text programming; short block processing time; create new program while another is running; proven Heidenhain machining cycles • Electronic handwheel • CE certified Gjdpfxex D In Uo Apwska Additional equipment • Chip conveyor • Coolant system • Internal high-pressure coolant 50 bar with belt filter system • Coolant and compressed air gun • BLUM laser tool measurement • Heidenhain TS460 workpiece probe system for HSK63 with radio and infrared transmission • Heidenhain KinematicsOpt including Heidenhain calibration sphere KKH 250 • Extraction system: Filtermist FX4002, air volume 1,250 m³/h • Rotating viewing window • Work area light • Tool package Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm Gjdpfx Aopumdcepweka y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: used, empty load weight: 9,050 kg, maximum load weight: 32,950 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2022, next inspection (TÜV): 05/2027, loading space length: 13,398 mm, loading space width: 2,493 mm, loading space height: 2,654 mm, total length: 26,000 mm, total width: 40,000 mm, total height: 1,40,400 mm, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2022, front tire size: 385/65 R22,5, rear tire size: 385/65 R22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW, type: freezer, operating hours: diesel hours 2,547 / electric hours 333, double-deck with beams, electrical connection, color: white, suspension: air-lift, lifting and lowering, cooling system: transport cooling with diesel drive & stationary cooling, lift axle: 1st axle, portal door, brake: disc brake, fixed side impact protection, start/stop function, storage compartment 1, temperature recorder: Thermo King, refrigeration unit type: Thermo King Spectrum d/e, evaporator 2, anti-spray, partition, aluminum floor, double spare wheel holder with wheel, 2x7 + 15-pole power connections, work lights (side, LED), roller ramp buffer, very good condition. Gksdpfxjzrww Ue Apwea

Condition: used, mileage: 3,29,000 km, power: 184 kW (250.17 HP), first registration: 04/2015, overall weight: 16,000 kg, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, tail-lift, Eurocargo 160E25 Automatic transmission Air conditioning 2x camera Refrigerated box for 15 pallets Thermo King T-1000R Spectrum Multi Temp refrigeration unit 4x evaporators Hollandia 1500 kg tail lift Good condition Belgian registration Price: €12,800 net Gkodozthcdspfx Apwja

Condition: new, Year of construction: 2023, Chiller unit with 25 kW cooling capacity at 7/12°C, internal P3 pump, internal buffer tank with 110 liters, scroll compressor, coaxial evaporator for process applications. Gkodpfxegkan Sj Apwea

Condition: new, Year of construction: 2024, The FAS series are air-cooled refrigeration systems for industrial use. They are installed outdoors. The equipment of the FAS 064 is as follows: closed internal tank as well as a 3 bar pump and scroll compressors, winter package down to -10°C, The evaporator is a tube bundle installed in the internal tank. Gkjdpfx Apsr D R Ubewea The refrigerant used is R454B Cooling capacity at 12/7°C and 35°C ambient temperature 49kW

Condition: new, Year of construction: 2024, The Cube CAL series are air-cooled refrigeration systems for industrial use. Gksdpfer D Sanox Apwja They are installed outdoors, but can also be installed indoors due to the non-flammable refrigerant R513A. The Cube CAL 013 has an internal tank, an internal P3 pump and a coaxial evaporator. Operation can be guaranteed down to a process temperature of -10°C. Cooling capacity at 7/12°C 35°C ambient temperature 7.9kW

Condition: new, functionality: fully functional, power: 17.7 kW (24.07 HP), fuel type: diesel, operation weight: 1,456 kg, Year of construction: 2026, Wacker Neuson RTD-SC4 Trench Roller – NEW Wacker Neuson RTD-SC4 Trench Roller – NEW | SC4 Remote Control | Operating weight 1,456 kg | Kohler diesel engine | Compatec compaction system optional | Maximum safety & efficiency Article number: 5100083007 Technical data: Manufacturer: Wacker Neuson Model: RTD-SC4 (optional with or without Compatec compaction system) Condition: NEW Operating weight: 1,456 kg Working width: 820 mm Travel speed: 1.3–2.7 km/h Vibration frequency, Level I: 42 Hz Engine: Kohler diesel engine KDW1003 Engine power: 17.7 kW (approx. 19.8 hp) Rated speed: 3,000 1/min Fuel tank: 35.8 l Fuel consumption: approx. 2.7 l/h Sound pressure level: 109 dB(A) Remote control range: max. 20 m Remote control transmission time: up to 12 h Remote control battery type: Ni MH 7.2 V / 2,000 mAh Highlights & Features: - SC4 remote control with modern LCD display - All-in-one personal remote control for full machine control - Work without entering the trench – significantly increased safety - Compatec compaction system available as an option for optimal compaction results Gkedpfx Apozrtlhewsa - Infrared visual connection for safe machine control - Patented return-to-center system - Tilt protection for maximum operational safety - Optimized access to hydraulic components - Reduced number of components – low maintenance & operating costs - Robust design for demanding construction site use Application areas: ✓ Trench & channel construction ✓ Pipe & line construction ✓ Civil engineering & earthworks ✓ Fiber optic & infrastructure projects ✓ Municipal applications & construction companies Location: Warehouse D-46514 Schermbeck (North Rhine-Westphalia) – Inspection & collection possible Delivery: throughout Germany & internationally on request Price: ex warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information is subject to change without notice. Errors and prior sale excepted. Prices plus VAT / VAT excluded Other trench rollers available! ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson trench roller | RTD-SC4 NEW | Compatec | SC4 remote control | Trench compaction | Wacker Neuson quality Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Request now & secure immediately available new products! If required, we will be happy to offer you a virtual inspection of the machine via video call.