Used Ingramatic Thread Machine For Assembled Washer for sale (68,612)

Condition: new, Year of construction: 2024, shaft length under head: 80 mm, thread length: 55 mm, travel speed (max.): 480 mm/min, THREADING MACHINE E.W. MENN GW63 Gedpfxet Uucae Af Asbl Refurbished as new acc. to CE Stand. Completely overhauled. New Guides, vibrator, new vibrating evacuation. New electrical system with Inverter and PLC M8x80/55 mm. 480 ppm. Thread diameters (min./max.): 3 - 8 mm. Dies length: 115/130 mm. To be viewed and tested at HBR srl - Calolziocorte (LC)

Condition: used, Year of construction: 2010, The machine has recently undergone service. Machine may need following repairs: A damaged guide rail clamping the PCB was observed. Transport belts are in poor condition. Mirrors in the camera module need to be cleaned before calibration. Software version Si 8.60 may require an update. Gedpex Tv Rxofx Af Ajbl Otherwise it is operational.

Condition: excellent (used), Year of construction: 2020, operating hours: 829 h, Baader 588 Filleting Machine 2020, low hours, with spares Complete with IS026 Header Baader 61 knife sharpener 6 station trimming Line Infeeds/outfeeds, various conveyors Compressor Gbsdpfxsyq Sbye Af Asl Rare package!

Condition: used, Year of construction: 2006, Machine operational condition. Gbsdpfx Afsxvay Tj Ael FlexJet 2.6MPP Front Head / Pressure Enhanced Rear Head Magellan 2.3 MPP – Rear Four Sided PEC Lighting Board transfer Left-To-Right 3mm Edge Clearance Rear DPTF Mounting Location 4” Outbound, 18” Max. Bd Automatic PWC Single Lane Board Support All Feeder Banks Fixed 24V Transformer Kit Interface Machine With PTF Rear User Interface Kit CE Compliance GSM SECII/GEM Software Driver, S/W, New Product Introduction English Flip Books Ask for additional information!

Condition: used, Year of construction: 2006, Operational condition. Gbsdjxva Dljpfx Af Aol Lightning Head Left-to-Right PCB Transfer Direction 3mm (0.117") Edge Clearance HSC Nozzle Changer Kit Fixed 36 Slot Feeder Bank 4" Outbound Rear Single Lane Brd Support 30-SPINDLE HEAD PERFORMANCE KIT UPGRADE KIT, ACCURACY ENHANCED SPINDLE Second Rear Interface

Condition: good (used), Thread cutting machine with Stehler jaws, thread cutting head Gbodpfsb A Ncujx Af Ael -Hole diameter: 190 mm -Size: 1/2 - 2 inches -Weight: 130 kg

Condition: good (used), Thread cutter, thread cutting machine, thread drilling machine -Integrated reversing gearbox: with rapid return -Nominal input: 230 watts -Max. cutting capacity: M6 -Connection: 230 volts -Weight: 2.5 kg Gbedpfx Aeb A N Ikof Ajl

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 2" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm Gedpfx Afeb A Iwco Aobl -Weight: 55 kg

Condition: good (used), Thread cutting machine, pipe thread cutter Gbodpfx Afjb A Rzwj Asl -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 60 kg

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels Gbodpjupbf Dofx Af Aol - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge Gsdpohgnd Aefx Af Asbl - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Good condition

Condition: good (used), Year of construction: 1956, machine/vehicle number: 5866, POLYGRAPH thread sewing machine 39 3/4 /2, machine number 5866, working width 39 cm, year of manufacture 1956, in good condition, immediately available. Gbjdpfx Afsxbzgxs Asl If interested, we will also be happy to inform you about other machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment.

Condition: ready for operation (used), Thread sewing machine MARTINI, different models in a good condition, immediately available Gbedpfxeg Ntkqs Af Ael

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank Gjdpfxswk Nxqs Af Asbl - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: used, Year of construction: 1991, workpiece diameter 30 mm threading length 110 mm thread pitch 0,5-2,75 mm/GG total power requirement 4,5 kW Gbodpfot Hwzcox Af Aol weight of the machine ca. 1,7 t dimensions of the machine ca. m

Condition: used, Year of construction: 1986, workpiece diameter 460 mm threading length 900 mm Gbedpet H Smtsfx Af Ajl thread pitch 100 mm total power requirement 10 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: used, Year of construction: 2011, workpiece diameter 320 mm Gbodpst Hxbdofx Af Asl threading length 570 mm thread pitch 315 mm total power requirement 17 kW weight of the machine ca. 12 t dimensions of the machine ca. m

Year of construction: 1985, condition: used, workpiece diameter 50 mm threading length 100 mm thread pitch mm total power requirement 1 kW weight of the machine ca. 1500 kg dimensions of the machine ca. m Gjdpet Hwn Njfx Af Asbl

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm Gbedpstzdyzjfx Af Aol threading length 3000 mm thread pitch 2-16 mm total power requirement 25 kW weight of the machine ca. 10,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm Gedpfx Aot Hw N Tof Asbl threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 1985, thread dia. 254 mm grinding length 350 mm thread pitch 51 mm Control SIEMENS S 8 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _____ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Gbjdpfx Aet Hw U Ajf Ael Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg Accessories / Special Features * This is a programme controlled (SIEMENS S 8) internal thread and internal worm grinding machine , suitable for the grinding of ball screw nuts. * All movements are controlled by the SIEMENS programme control * Automatic infeed for grinding depth. * Automatic diamond roll profile dressing device, motorized by hydraulic motor,and device can be swivelled and mechanically adjusted lengthwise. * FISCHER Internal grinding spindle up to 30.000 rpm with oil and air lubrication and with Infinitely variable grinding spindle speeds. • 4-jaws chuck approx.. Ø 250 mm * Separate switch cabinet, separate hydraulic unit, oil drip pan, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1979, workpiece diameter 320 mm threading length 300 mm thread pitch mm total power requirement 90 kW weight of the machine ca. 12000 kg dimensions of the machine ca. m Thread and worm grinder for steering worms Gedpfx Ajt Hwnpsf Aebl

Year of construction: 2011, condition: used, 32 mm direkt 1:1,25 angle adjustable from - to -20/ +20 Grad Gjdpfewa Uf Ujx Af Ajbl weight 17,0 kg dimensions 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € - prepared for two driven toolholders straight 2-020-W10-1001 (not included) - Angle-adjustable threaded swivel head

Year of construction: 2011, condition: used, 32 mm direkt 1:1,25 Gbedpfxowa Ugle Af Ajl angle adjustable from - to -20/ +20 Grad weight 17,0 kg dimensions 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € - two driven toolholders straight 2-020-W10-1001 - Angle-adjustable threaded swivel head

Condition: excellent (used), workpiece diameter (max.): 30 mm, spindle diameter: 54 mm, roll diameter: 125 mm, spindle speed (max.): 224 rpm, spindle speed (min.): 40 rpm, roll width: 70 mm, Excellent Used Profiroll Bad Duben Model UPWS 10 ton Hydraulic Thread Rolling Machine with swivelling spindle for in-feed and thru-feed rolling Max rolling diameter: 30mm - Max thread length infeed rolling: 70mm - Max thread length thru-feed rolling: infinite Gbodjymlx Djpfx Af Ael Dia. of rolling spindles: 54mm - Max size of thread dies: 125mm dia x 70mm wide - 4 spindle speeds 40 to 224 rpm