Used Istra Tf-300H for sale (1,433)

Condition: used, Year of construction: 2025, operating hours: 122 h, Operating hours: 122, First registration: 08.10.2025 Knedpfx Akoyv S Ufolea Maximum lifting capacity: 3,000 kg Maximum lifting height: 6,700 mm Maximum outreach: 3,800 mm Length to attachment carrier: 4,510 mm Width: 2,000 mm Height: 2,120 mm Total weight with forks: 6,620 kg Total weight without forks: 6,450 kg Engine: 4-cylinder Deutz TCD 2.9 2.9 L displacement, water-cooled Power: 75 kW (101 hp) 2,600 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement motor EPD PLUS including optional automatic rpm increase Mineral hydraulic oil HVI 46 Transmission: 2-speed Electrohydraulic control Vmax = 1st / 2nd gear = 16/20 km/h, optional 40 km/h Cab: Fully enclosed cabin, split door 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 joystick, electronic with capacitive release and travel direction switch Telescopic boom: 2-section with electronic end position cushioning (Soft Stop) Attachment carrier: Quick-change system type “ZM2” hydraulically controlled from the cab Steering: Hydraulic steering 3 steering modes: four-wheel, front-wheel, crab steering Drive: Permanent all-wheel drive Axles: Front axle rigid Rear axle oscillating Braking system: Servo-assisted disc brakes on all four wheels Automatic parking brake when engine is off Hydraulic system: Load-sensing pump with variable output Total flow: 100 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12V battery with 100 Ah Alternator 120A Stabilization control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off Tyres: 400/70-20, agricultural tread Standard equipment: Power brake Hydraulic oil cooler Rear plate for mounting a trailer hitch Radio preparation Work lights on cabin (2 front, 2 rear) V2001 preparation for additional function at boom head 2 hydraulic connections at boom head Load guard on attachment carrier Road lighting Automatic battery disconnect switch Electrical connection cable inside boom Audible reverse warning Lift cylinder support for safety 1 Operating manual 1 Engine manual Special equipment: EU approval as tractor/towing vehicle 40 km/h incl. height-adjustable, self-locking trailer hitch, 30/32 mm pins, trailer lighting connection Air conditioning LED work lights on cabin (2 front, 2 rear) Boom suspension (B.S.S.) Location: 54595 Prüm

Condition: new, functionality: fully functional, NORD DRIVESYSTEMS SK 01F AL-90SP/4 TF | New Gearmotor No. 7 Gearbox Technical Specification: Manufacturer: NORD DRIVESYSTEMS (Getriebebau NORD GmbH) Type: SK 01F AL-90SP/4 TF Serial number: 204001420-100 Year of manufacture: 2024 Output torque (M2): 39 Nm Gear ratio (i): 5.20 Knodsy I Dqpjpfx Aklja Output speed (n2): 275 rpm Input power (P1): 1.10 kW Weight: 24 kg Lubrication: CLP 220 oil (0.220 l) Motor Technical Specification (NORD SK 90SP/4 TF): Model: SK 90SP/4 TF Year of manufacture: 2023 Power: 1.10 kW Rotational speed: 1430 rpm (50 Hz) / 1740 rpm (60 Hz) Voltage: 230/400 V (50 Hz) / 265/460 V (60 Hz) Efficiency class: IE3 (85.3% at 50 Hz) Protection rating: IP55 Motor weight: 16 kg Complete NORD DRIVESYSTEMS gearmotor consisting of a high-performance helical gearbox manufactured in France and an energy-efficient IE3-class electric motor made in Poland. The device features a compact blue housing and is designed for continuous operation (S1 duty) in demanding industrial applications. With a high output torque of 39 Nm at an output speed of 275 rpm, this set is ideal for driving conveyors, mixers, and other process line components, delivering high energy efficiency and reliable performance.

Condition: new, Year of construction: 2025, OTINUS PROMOTION: 0% LEASING! Don’t wait for a better time – it’s now. Otinus machines with financing at no additional cost. A straightforward offer: you pay only the net price of the machine. Optimize your taxes in 2026 and choose proven equipment. Contact us for details! CNC Lathe HLC-4055 with Fanuc 0i TF Control System Kedpfxewdt Szo Aklona Machining range: - Max turning diameter over bed: Ø 560 mm - Max turning diameter over cross slide: Ø 320 mm - Max swing diameter: Ø 400 mm - Max turning length: 548 mm - Center height: 980 mm - X-axis travel: 210 mm - Z-axis travel: 610 mm Turret: - Type: Hydraulic V12 turret - External tool size: 25x25 mm - Internal tool diameter: Ø 40 mm - Indexing time: ≤ 0.55 s Spindle: - Drive type: Belt-driven - Max spindle speed: 4500 rpm - Power consumption (15 min): 11/15 kW - Torque (15 min): 140/250 Nm - Spindle nose: JISA2-6 - Spindle bore: Ø 76 mm - Max bar workpiece diameter: Ø 50 mm - Front spindle bearing diameter: Ø 100 mm - Spindle diameter: 208 mm Feed rates: - Rapid traverse X: 24 m/min - Rapid traverse Z: 30 m/min - X/Z servo motor power: 1.8/1.8 kW Tailstock: - Quill diameter: Ø 100 mm - Center type: MT No. 4 - Quill stroke: 120 mm - Tailstock travel: 410 mm Other parameters: - CNC system: FANUC - Power supply: 25 kVA - Coolant tank capacity: 200 l - Machine weight: 4.5 t - Dimensions (L × W × H): 4200 × 2050 × 1850 mm

Condition: like new (used), Year of construction: 1998, KAESER SECOTEC TF 171 REFRIGERATION DRYER Capacity 17 m3/min THE DEHUMIDIFIER IS FULLY FUNCTIONAL. Knedpfx Ajt Hdimskloa

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 1,907 h, load capacity: 3,300 kg, lifting height: 6,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,700 kg, total length: 4,310 mm, drive type: Diesel, construction width: 2,100 mm, Rigid telescopic forklift Knedpey Scnnefx Aklea Mast type: Telescopic Technical condition: New Front tires size: 400/70-20 Rear tires size: 400/70-20

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: RS 110-6-2 TF, functionality: fully functional, filter area: 660 m², total height: 10,400 mm, total length: 9,200 mm, total width: 2,500 mm, overall weight: 9,000 kg, Equipment: documentation/manual, Industrial Extraction System Venti Oelde, Spülluftfilter RS 110-6-2 TF, High-Performance System Airflow approx. 87,500 m³/h, 660 m² filtration area, year of manufacture 1997, incl. 3 high-performance fans, incl. ductwork, incl. air recirculation for approx. 70,000 m³/h, excl. spark extinguishing system. For sale is a powerful industrial extraction system by Venti Oelde, designed for an airflow of approx. 87,500 m³/h. The system has been in continuous operation and is suitable for use in larger industrial applications (e.g., wood processing, furniture manufacturing, operations with high chip and dust volumes). 👉 This is a complete central extraction system, not a standalone unit! Key Technical Data (excerpt) - Airflow: approx. 87,500 m³/h - Configuration: Central extraction - Year of manufacture: approx. 1997 - Application area: Industry / continuous duty - Robust steel construction - Built for heavy-duty continuous operation Scope of Delivery - Filtration system - Fans - Ductwork - Air recirculation unit - Steel frame / support structure Condition - System was operational until recently - Used, age-related, but solid industrial build quality - Inspection is explicitly encouraged Special Features - Very high air capacity – ideal for large-scale production facilities - Immediately available – no long lead times as with new systems - Heavy-duty construction – durable industrial technology - Attractive alternative to costly new installations - Dismantling support can be organized at extra cost!!!! Kedsywflaopfx Aklena The offered machine is sold as a used system. Sale is conducted with exclusion of any liability for material defects. The machine is sold as inspected and excluding any warranties. The seller accepts no guarantee regarding the functionality, performance, or suitability for any particular purpose. Disclaimer All liability for material defects is excluded. This does not apply to damages arising from injury to life, body, or health, or in cases of intentional or grossly negligent conduct by the seller. Dismantling and Transport Dismantling of the system is to be undertaken by the buyer at their own risk and expense. The buyer is responsible for all costs and risks associated with dismantling, loading, and transport. Transfer of Risk The risk passes to the buyer at the latest upon commencement of dismantling and/or loading. Other Information No liability is accepted for hidden defects. All information regarding the machine (e.g., year of manufacture, operating hours, technical data) is given to the best of our knowledge but without guarantee.

Condition: used, combined with: - Slot mortising unit - Spindle moulder - Surface and thickness planer - Heavy-duty roller table combined with: Slot mortising unit Spindle moulder Heavy-duty roller table from private owner used, good condition, low operating hours Make: Rex Model: TFZ-D-4 Machine no.: 15.842 Extraction connection D 120/140 mm Space required approx. 1800 x 2000 x 1100 mm Weight approx. 1200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Kodpfx Akjycxg Tjlena Delivery in as-inspected condition, without warranty or guarantee

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; filling range: 1-120ml; accuracy: ±1%; tube diameter: 10-28 mm (one mould is required for each tube diameter); tube length: 50-180 mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 3.1kW; compressed air: 0.4-0.6MPa; machine dimensions: L1950xW750xH1850 mm; machine weight: 900kg. Knsdpfx Ajv Nldhsklea Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade plastic tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; filling range: 1-250ml; accuracy: ±1%; tube diameter: 10-50mm (one mould is required for each tube diameter); tube length: 50-200mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 7kW; compressed air: 0.4-0.6MPa; machine dimensions: L1950xW760xH1850mm; machine weight: 950kg. Kedpsv Nldbjfx Aklona Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 80 cycles/minute; filling range: 1-300ml; accuracy: ±0.5%; tube diameter: 10-50 mm (one mould is required for each tube diameter); tube length: 50-210 mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 3.1kW; compressed air: 0.4-0.6MPa; machine dimensions: L2270xW960xH2100 mm; machine weight: 1200kg. Knodpfx Aksv Nldnjloa Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, High-speed tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for pre-made tubes (with closed cap) made of plastic, aluminum or laminated composite material. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. External tube feed lift, water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 160 cycles/minute; filling range: 1-300ml; accuracy: ?±0.5%; tube diameter: 10-50 mm (one mould is required for each tube diameter); tube length: 50-240 mm; number of filling heads: 2; storage hopper capacity: 70L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 6kW; compressed air: 0.6MPa; machine dimensions: L2870xW1770xH2340 mm. Knjdpfxov Nld Is Aklja Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 65 cycles/minute; filling range: 1-400ml; accuracy: ±0.5%; tube diameter: 10-50 mm (one mould is required for each tube diameter); tube length: 80-230 mm; number of filling heads: 1; storage hopper capacity: 45L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 9kW; compressed air: 0.4-0.6MPa; machine dimensions: L2000xW1160xH2100 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kjdov Nlduopfx Aklena

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for pre-made tubes (with closed cap) made of plastic, aluminum or laminated composite material. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 80 cycles/minute; filling range: 1-400ml; accuracy: ±0.5%; tube diameter: 10-60 mm (one mould is required for each tube diameter); tube length: 50-240 mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 9kW; compressed air: 0.4-0.6MPa. Ksdpfov Nldzjx Aklena Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2007, condition: used, For inquiries regarding this attachment, Mr. Herden (by phone) will be happy to assist you. SIMEX TF 800 Rock Cutter / Milling Head / Tunnel Cutter / incl. Liebherr SW48 Adapter Plate / Year of manufacture: 2007 / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross Drum width: 800 mm Milling speed: 75 - 115 rpm Hydraulic motor power: 61 (83) kW (HP) Required oil flow: 105 - 190 l/min Required oil pressure: 350 - 200 BAR Max. vertical force: 31.8 kN Operating weight (standard drum): 1,035 kg Recommended excavator weight: 14 - 22 tons Equipment: - incl. Liebherr SW48 adapter plate Kedpfxsyxagnj Aklena We have a large stock of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) available for immediate delivery. We carry a wide range of different attachments in our warehouse, all available for immediate delivery! Mr. Herden (phone) is happy to assist you. On request, we are happy to provide you with a financing quote as well. We are official sales and service partners of: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Machinery - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. Errors and prior sale reserved! Internal no.: 310390 = Further information = Curb weight: 1,035 kg For further details, please contact Marius Herden.

Condition: good (used), Year of construction: 2022, Labeling machine with maximum label width of 120 mm, suitable for plain packages and tags, 2 label dispensers, speed 60 m/min. Knodpfsx Rp E Rsx Aklja

Condition: good (used), – Pneumatic clamp Kedpjvx Hyvjfx Akljna – Documentation – 380 V

Condition: new, Year of construction: 2024, load capacity: 300 kg, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Kjdpfxorypmvj Akljna Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Condition: used, empty load weight: 7,200 kg, maximum load weight: 29,600 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 10/1996, loading space volume: 49 m³, suspension: air, tire size: 385 / 65 R 22,5, color: white, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum rims, 3-axle, air suspension, last axle self-steering, ABS (anti-lock braking system), catwalk Kodpfxevhg D Hj Aklsna Body: Tipping silo 49m³ Pneum. Pneum. holding bar on catwalk ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages Knodpfewb Hxvjx Aklsa - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: good (used), Year of construction: 1982, Chip conveyor, Manufacturer: SILISTRA, Type: TCA 280X4710, year 1982, with coolant pump. Was previously connected to a CNC boring mill. Overall length: 5200 mm Neck width: 410 mm Neck height: 220 mm Neck length: 4700 mm Discharge height: 800 mm Total height: 1100 mm Weight approx. 1200 kg. Ksdjwnpngjpfx Aklena In good condition.

Condition: new, ❄️ MISTRAL REFRIGERATION – CONDENSING UNITS ❄️ We are proud to present our latest condensing units, engineered for demanding commercial and industrial refrigeration applications. These units offer: 🔧 Robust industrial construction ⚙️ High-performance components 🌍 Adaptability for international projects 📦 Optimized for large-scale supply At Mistral Refrigeration, our goal is clear: 👉 To deliver reliable, durable, and competitive refrigeration solutions for professionals. Our equipment is ideally suited for: 🏭 Food processing industry 🐟 Fishing sector 📦 Logistics and cold storage platforms ❄️ Commercial & industrial refrigeration projects ✔ CE compliant equipment ✔ Long-term reliability ✔ Strong quality-to-price ratio 📩 Looking for a reliable partner for your refrigeration projects? Contact us to discuss your requirements. Knodpfx Akjy I Aqnslsa

Condition: new, ❄️ Flake Ice Machine – Professional Performance & Reliability Looking for a durable and high-performance solution for your business? Our machines are engineered to meet the demands of even the toughest environments: ✔️ 100% stainless steel evaporator ✔️ Fully stainless steel frame ✔️ Maximum corrosion resistance ✔️ Ideal for fishing, food processing, and industrial applications 👉 Reduced maintenance costs 👉 Long service life 👉 Profitable and secure investment 📦 Immediate availability Ksdjy I Ap Rspfx Aklona

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN529636, Year of construction: 2016, operating hours: 16,112 h, load capacity: 5,000 kg, lifting height: 5,500 mm, fuel type: gas, mast type: simplex, construction height: 2,540 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Load center: 600 mm Lifting height: 5,500 mm ISO class: 3 (2,500–4,999 kg) MACHINE DETAILS Mast type: Simplex Drive type: Internal combustion engine Rated power: 63.0 kW Overall height: 2,540 mm Weight: 7,718 kg EQUIPMENT Side shifter Kodpfszu Nh Rjx Aklona Fork positioner 3rd valve 4th valve Heater Full cabin Air conditioning

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN524545, Year of construction: 2016, operating hours: 9,317 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: simplex, construction height: 3,071 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Lifting height: 4,700 mm Load center distance: 500 mm ISO class: 2 Kjdpezu Nhqjfx Aklsna MACHINE DETAILS Mast type: Simplex Drive type: Internal combustion engine Rated power: 38.0 kW Overall height: 3,071 mm Own weight: 4,100 kg EQUIPMENT Side shifter Fork positioner 3rd valve 4th valve Heater Full cab

Condition: like new (used), controller manufacturer: ABB, ABB 3HAC029818-001 ABB Type Designation: 55x40x30 Knjdpfx Akozvyr Aelsa Catalog Description: DSQC 663 Drive Unit