Used Jekko Mpk 10 V for sale (55,727)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Siemens 810D / ShopMill, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,035 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 510 mm Spindle speed, max.: 10,000 rpm Table width: 560 mm Table length: 1,200 mm Number of tool magazine positions: 20 MACHINE DETAILS Control system model: Siemens 810D / ShopMill Control cabinet cooling: Rittal SK 33023.100 Spindle operating hours: 11,000 h Total operating hours: 33,600 h EQUIPMENT Internal coolant supply (ICS) Iodpfx Aozqfv Ajgpetk Chip conveyor

Condition: like new (used), Year of construction: 2017, machine/vehicle number: HMD-G-80-1000, I have a nearly new, immediately available Abel piston diaphragm pump for sale, type HMD-G-80-1000, cast iron construction, manufactured in 2017, recently completely overhauled and repainted, maximum flow rate 70 m³/h, maximum pressure 15 bar, 30 kW engine, complete with new control cabinet, frequency converter, and pressure sensor. Ideally suited for long 1200 or 1500 mm chamber filter presses. Located in 58762 Altena, Germany. Just set it up, plug it in, and let it run… Iodpfjyxxmgox Agpotk

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Isdpfx Agjzghf Eepstk

Condition: used, Year of construction: 2006, functionality: fully functional, Machine dimensions: 2.9m x 2.8m x 2.9m Machine weight: approx. 7 tons Year of manufacture: 2006 Travel ranges: X 1050 Y 530 Z 510 (150 above table) Spindle speed: max. 12,000 rpm Motor spindle: SK40 Measuring probe: Renishaw OMP 60 Measuring head: Mazak Internal cooling pressure: 25 bar External cooling Tool magazine: 30 positions Articulated belt conveyor Machine control: MAZATROL M640 • One machine each in left-hand and right-hand configuration (chip conveyor on the left or right) • Various tool holders can be purchased separately. • NO clamping devices (vices) included! • NO dust extraction system Isdpoy Tlu Tsfx Agpjtk The stated price is for one machine only.

Condition: used, Year of construction: 2008, Travel distances: X axis = 350 mm Y axis = 250 mm Z axis = 220 mm incl. cooler Fully functional Itsdpfsw Swd Aox Agpjk

Condition: used, Year of construction: 2004, Manufacturer: HEUFT Model: VTR 10.19.0.10 Year of manufacture: 2004 Capacity: 3 trolleys, 60 × 100 cm Included: 6 bakery trolleys Condition: oven from current production, no repairs needed Functional, ready for further use Please contact us for additional information and photos. Itjdozcdk Depfx Agpjk We also have other bakery machines and equipment available.

Year of construction: 2003, condition: used, functionality: fully functional, maximum load weight: 100 kg, total length: 1,965 mm, total width: 1,970 mm, total height: 2,550 mm, loading space volume: 2 m³, machine/vehicle number: 03108, Heavy-Duty 100 kg Steam-Heated Industrial Tumble Dryer for Garment & Textile Processing The Triveneta Grandi Impianti E/100 R.V. is a heavy-duty industrial steam-heated tumble dryer manufactured by Triveneta Grandi Impianti S.r.l., Italy. Designed for continuous industrial laundry and textile finishing operations, this high-capacity dryer is ideal for garment manufacturing, denim production, commercial laundries, and other high-volume drying applications. This unit (MASI internal reference K672) was used in professional apparel production until the factory shutdown and remained operational. Technical Specifications • Manufacturer: Triveneta Grandi Impianti S.r.l. • Model: E/100 R.V. • Machine Type: Industrial Steam-Heated Tumble Dryer • Serial Number: 03108 • Year: 2003 • Country of Manufacture: Italy • Maximum Load Capacity: 100 kg • Heating System: External Steam Supply • Power Supply: 400 V, 3-Phase, 50 Hz • Machine Weight: Approximately 1,450 kg • Dimensions: • Width: 1,970 mm • Depth: 1,965 mm • Height: 2,550 mm Ijdpfxezmwdke Agpetk Key Features • High-capacity industrial drying drum • Steam-heated drying system • Digital microprocessor control • Programmable drying cycles • Pneumatic door opening system • Stainless steel front loading door • Twin exhaust and ventilation system • Integrated lint filter housing • Emergency stop system • Heavy-duty industrial construction • Designed for continuous production environments Includes • Triveneta Grandi Impianti E/100 R.V. tumble dryer • Integrated microprocessor control panel • Steam connection interfaces • Lint filtration system • Pneumatic door system • Industrial support frame Applications • Garment manufacturing • Denim production • Industrial laundry operations • Textile finishing • Commercial laundry facilities • Industrial garment drying • High-volume textile processing Condition • Fully operational prior to factory shutdown • Previously used in professional garment production • Good industrial condition • Structurally complete • Normal cosmetic wear consistent with industrial use • Minor surface oxidation around the door frame • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting steam, electrical, and utility connections, dismantling, loading, transportation, and all related costs. Professional rigging and lifting equipment are recommended due to the machine's approximately 1.5-tonne weight. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machine is available individually or together with the complete industrial laundry and finishing line.

Condition: new, Year of construction: 2023, functionality: fully functional, power: 9.75 kW (13.26 HP), usable tank capacity: 1,000 l, Unused PHARMIX model HV 1000 stainless steel product contact parts conical mixer designed for heavy products with a bulk density of up to 3 kg/m³. The mixer has a working capacity of 1000 litres. The mixing screw, with a diameter of 310 mm, is driven through a NORD gearbox by a 9 kW electric motor and supported by a bottom pintle bearing (hard metal). The stainless steel arm is driven through a NORD gearbox by a 0.75 kW electric motor. The gearbox is prepared for liquid injection, with a 10-litre pressure vessel designed for a maximum working pressure of 5.5 bar. Includes a stainless steel outlet knife gate valve L65 DN300, spare screw agitator, and control panel with frequency converter. It is also possible to supply a supporting construction at additional cost (drawing shown in the photo). New 2023. Itedpfxjxldtvj Agpjk

Condition: ready for operation (used), Year of construction: 2012, A CNC vertical machining center is offered. Travel X/Y/Z: 1000mm/500mm/570mm, table dimensions X/Y: 1200mm/500mm, max. workpiece weight: 800kg, distance from spindle nose to table: approx. 120-690mm, tool holder: SK40, max. spindle speed: 10000rpm, tool magazine: 24, max. tool diameter: approx. 80mm, max. tool length: approx. 300mm, max. tool weight: approx. 7kg, rapid traverse X/Y: 24m/min, rapid traverse Z: 20m/min, positioning accuracy: approx. 8-12µm, control: Heidenhain TNC 620. Machine dimensions X/Y/Z: approx. 2700mm/2550mm/2770mm, machine weight: approx. 5100kg. Inspection possible by appointment. Iedpozipgijfx Agpotk

Condition: good (used), Year of construction: 2016, CNC Control Axes X-axis travel mm: 1050 Y-axis travel mm: 530 Z-axis travel mm: 510 4th axis: DDRT-260X Feed rate m/min: 5 Rapid traverse m/min: 30 Work Table Number of pallets: 1 Table dimensions mm: 1350x600 Maximum workpiece weight kg: 1200 Table surface configuration: 18mm T-slot, 6 units Spindle Spindle speed rpm: 8000 Spindle power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool System Tool holder: MAS-BT 50 Tool magazine positions: 30 With adjacent positions free mm: 240 With adjacent positions occupied mm: 120 Maximum tool length mm: 350 Maximum tool weight kg: 20 Tool change time s: 2.34 Equipment Chip conveyor Internal coolant supply Ijdpjyyc Dlsfx Agpstk Rated power kVA: 52 Machine basic dimensions / weight Length mm: 3300 Width mm: 3000 Height mm: 2800 Weight kg: 7700

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: DT1UE18105029734, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, is suitable for CMP and SCC 61/101 electric combi-steamers manufactured from 2011 to the present (index H+I). The hood has been inspected in our in-house workshop and is fully functional. The hood has dents and scratches on one side panel due to improper transportation. This does not affect the hood's functions; however, for this reason, we offer it at a special price. The list price for this Ultra Vent hood is €3,696 net. Service: We will gladly assist you in finding a certified Rational customer service provider. Are you looking for a specific Rational appliance type? Ask us; we have access to an extensive range of used and new equipment. We will be happy to advise you on all appliance types. Our used equipment service for you: * 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. * Professional overhaul/inspection & expert cleaning * Inspected & fully functional - or your money back * Flexible shipping or self-collection options * Competent advice - before and after purchase * Provision of operating manuals, connection diagrams & spare parts * Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which captures and removes vapors. Complex measures for exhaust system installation are a thing of the past. An external connection is completely eliminated. Installation is simple and can even be done retroactively. Technical data: * W x D x H: approx. 854 x 1226 x 470 mm * Power connection: V: 230 / Hz: 50-60 * Weight: approx. 55 kg * Serial number: DT1UE18105029734 Isdpfx Aezu Sffegpetk * Year of manufacture: 2018 Condition: used, fully functional Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. Sales are subject exclusively to our general terms and conditions.

Condition: used, Year of construction: 2000, grinding diameter 500 mm grinding length 1000 mm centre height 250 mm -major maintenance -New table geometry -partial painting of the interior Itsdpoxzk Niefx Agpek grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: used, Year of construction: 2005, operating hours: 24,500 h, functionality: fully functional, Manufacturer Avermann Typ AVOS 1810S-90/100 Year of construction 2005 Hours of operation 23,100 h Quantity of pressed bales 16,163 piece Press power main press 100 tons Specific press capacity 121,2 N/cm² Feed channel 1,000 x 1,800 mm Capacity per cycle time 1,35 cm³ Theoretic cycle time 12,5 sec. Bale size 1,100 x 750 mm Driving motor 2 x 45 kW Connected load 130 kW Tying system 5 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 12,2 tons/h bulk weight of 50 kg/cbm approx. 16,0 tons/h bulk weight of 100 kg/cbm approx. 23,2 tons/h Bale weight 500 up to 800 kg, depends on material and bale length Volume hydraulic oil tank 2,000 l Iodpfx Aozc Rhvegpotk SPS controller (manuf., type) Siemens SIMATIC S7-300 Transport dimensions only baler 11.200 x 2.355 x 2.700 mm (without feeding chute) Machine weight baler approx. 24,5 tons Accessories: ruffler and special press ram

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: X1T132/23, turning diameter over cross slide: 350 mm, turning length: 650 mm, turning diameter: 350 mm, spindle bore: 42 mm, WOHLENBERG V 1000 Lead and Feed Screw Lathe (Universal Lathe) 3000 mm, year 1985 3-axis digital readout from Heidenhain Feed on top slide Coolant system Swing over bed: 1000 mm Swing over cross slide: 760 mm Turning length: 3000 mm Spindle speeds: 4.5 - 900 rpm Centre height over flat bed: 500 mm Workpiece weight between centers: max. 5000 kg Workpiece weight in steady rests: max. 7100 kg Bed width: 560 mm Spindle bore: 104 mm Voltage/Frequency: 380/50 V/Hz Total power requirement: 32 kW Dimensions: 5520 mm x 2200 mm x 1775 mm Itsdpeylbldjfx Agpek Machine weight approx. 9 t Control: conventional

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Itsdpfxozvni As Agpok Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Video of machine in operation available

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons Isdpfx Agsyzr Nmjpetk • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Year of construction: 2004, condition: ready for operation (used), Axes: XYZ (3-axis), travel X/Y/Z: 950mm/500mm/450mm, speed: 8000rpm, rapid traverse: 40m/min, spindle nose: SK40, table size X/Y: 580mm/1150mm, max. table load: 900kg, tool holder: BT40, tool capacity: 24, control: Heidenhain iTNC 530. dimensions X/Y/Z: approx. 2400mm/4400mm/2700mm, weight: approx. 5000kg. Itsdpotufb Iefx Agpsk

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: DT1UE19035033062, This Rational UltraVent hood for Rational combi steamers, including the connection kit, is compatible with the CMP, SCC 61/101 electric combi steamers manufactured from 2011 to the present (index H+I). The hood has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. Iodpfx Aezu Sgcegpotk Are you looking for a specific Rational appliance type? Please inquire, as we have access to a wide range of used and new equipment. We will gladly advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: * 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. * Professional overhaul/inspection and expert cleaning. * Inspected & fully functional - or your money back. * Flexible shipping or self-collection options. * Competent advice - before and after purchase. * Provision of operating manuals, connection diagrams, and spare parts. * Inspection according to DGUV V3. This UltraVent hood features patented condensation technology, which captures and removes vapors and fumes. Extensive measures for exhaust system installation are no longer necessary. An external connection is completely eliminated. Installation is simple and can even be done retroactively. Technical data: * W x D x H: approx. 854 x 1226 x 470 mm * Power connection: V: 230 / Hz: 50-60 * Weight: approx. 55 kg * Serial number: DT1UE19035033062 * Year of manufacture: 2019 Condition: used, fully functional Shipping: * Delivery or self-collection by arrangement. * Worldwide shipping on request. * Shipping to islands or mountain stations only by arrangement. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2000, Clamping force: approx. 200 t Iedpfezlg S Isx Agpetk Number of components: 2 Mold installation height: approx. 310 / 760 mm Opening stroke: approx. 300 / 575 mm Tie bar spacing: approx. 560 × 560 mm Horizontal screw diameter: approx. 50 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 2 Special equipment: Needle gate Hot runner zones: 16 Flow rate: approx. 190 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 196 A Current 2: 110 A Current 3: 86 A Current 4: 67 A Weight: approx. 9.7 t

Condition: good (used), Year of construction: 2006, operating hours: 1,07,027 h, functionality: fully functional, Clamping force 200 kN Screw diameter D55 mm Isdpfx Agjyvt Ugepjtk Max. injection volume 511cm³ Mounting plates 860 x 860 mm Total weight 12.9 t

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Max. machining length : 100 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 10.1 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 7 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1850X1140 [mm] - Machine height : 1800 [mm] - Machine weight : 1650 [kg] MACHINE HOURS - Number of working hours : 47317 [h] EQUIPMENT - CNC : Fanuc 31i-B5 Iodpfsvm Dx Ssx Agpetk - Interface : Ethernet / RS232 / USB / PCMCIA - 3 colors status lamp - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank * with high-pressure pump : HP MÜLLER CL2 80 [bars] - Bar loader : IEMCA ELITE 112/33 - Oil mist extractor : ELBARON - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, Year of construction: 2013, travel -x axis 762 mm travel -y axis 530 mm travel -z axis 560 mm control Siemens Sinumerik 828D max. Spindle speed 10.000 U/min. table-size 900 x 500 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | QUASER - MV 154 C-10B equipped with 30-way tool changer and chip conveyor. The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. We ask for your understanding ! Itedpfx Agszq Hi Djpsk - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MV-154 | MV154 | MV 154 C 10B | MV154C

Year of construction: 2001, condition: ready for operation (used), Two identical CNC lathes Scherer Feinbau are available. Swing diameter: 200mm, travel path X/Z: 240mm/280mm+515mm, max. workpiece height: 100mm, spindle nose taper: A4, spindle power: 7.6kW, spindle torque: 60Nm, speed: 8000rpm, travel speed X/Z: 60m/30m/min. Weight: approx. 5500kg, control: Siemens Sinumerik. Documentation vorhanden. An on site inspection is possible. Itsdpfxsxwywhe Agpok

Year of construction: 2014, condition: good (used), High-performance fan, Zenner, type VTZ 710/63/1 Special, year of manufacture 2014, consisting of a control cabinet, frequency converter, and cell gate. Technical data Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 Special Year of manufacture: 2014 Volume: 4.72 m³/s Maximum temperature: 80°C Iodpfxjzt Imco Agpstk Density: 1.2 kg/m³ Total pressure: 5,000 Pa Speed: 2900 1/min Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 800 kg The fan is designed for the transport of paper/cardboard, during which the material is also shredded. The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or our YouTube channel. Inspections, including with the machine running, are possible at any time by arrangement. Video calls are possible upon request. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale takes place from our location, without any warranty.

Condition: new, Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, nominal power (apparent): 15 kVA, controller manufacturer: Fanuc, controller model: 0iMF, workpiece weight (max.): 800 kg, total height: 2,875 mm, total length: 4,090 mm, total width: 3,475 mm, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 150 mm, spindle motor power: 11 W, spindle nose: BT 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 140 mm, tool weight: 800 g, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, An ECOM VL10i vertical machining center is immediately available. This is a NEW machine that has never been used in production and has never been installed at an end customer’s site. The machine was purchased in 2021 as part of a stock program designed to ensure immediate availability for customers. This is the last unit remaining in stock, available at our facility and ready for delivery without the usual lead times required for a new machine. Isdpfx Aszcmhxsgpjtk The machine is supplied complete with: - 10.4" LCD monitor - BT40 direct drive spindle - 24-position tool magazine with swing-arm tool changer - spindle cooling system - 30 bar high-pressure system - refrigeration system - belt-type chip conveyor - rigid tapping