Used Kent Vk 1600Mc-2 for sale (75,620)

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Cgodpfx Asxl Elgoiaeu

Year of construction: 2001, condition: excellent (used), Weishaupt GL 30/2-A dual fuel burner -Version Z: Output 300-2150KW: year of construction:2001 Oil throughput 40-180 kg/h With existing fittings Dungs DN50 Мы говорим по русски! Visits please only after telephone arrangement! Preferred sale to dealers, tradesmen or export. All information without guarantee, errors and prior sale reserved. The seller is not liable for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible Codpfjf Src Rsx Aiaegu

Year of construction: 1998, condition: excellent (used), Dual fuel burner Weishaupt RGL40/2-A -version ZM-NR Power 500-3450KW: Year:1998 Oil throughput 55-290kg/h With existing fittings Dungs DN65 Shipping possible worldwide. Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible Cgodpfx Aijhl Inmeaju

Condition: as good as new (ex-display), Year of construction: 2017, Siemens BD2 BD-2 busbar - busbar system Compatible with the Klöckner Möller BD 2 rail including connector, end cap and holder Type BD2 - 400 amp - 5 pole (L1 L2 L3 N PE) Are available : 41.6 running meters (13x 3.2m) 400A rail, almost as good as new 19.2 running meters (6x 3.2m) 630A rail, used (Klöckner Möller) Voltage Ui max. 660V, frequency 16.66 - 60 Hz Tap-off boxes with the following current strengths are also available: 25 - 50 - 125 - 160 - 250A We can offer you a complete system. Prices are per linear meter The dismantling was carried out by a qualified electrician. Busbars are in MINT condition!!!! Please inquire about lengths or accessories! Stock items, available immediately!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Cedpfxecumxcs Aiaogu Please ask ! Are you also looking for a crane system? Demag KBK systems, column slewing cranes, wall slewing cranes are available multiple times!!!!

Condition: used, mileage: 2,06,500 km, power: 114 kW (155.00 HP), first registration: 11/2016, fuel type: diesel, empty load weight: 2,869 kg, maximum load weight: 631 kg, overall weight: 3,500 kg, axle configuration: 4x2, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, traction control, Vehicle location: Bovenden, E-window left, E-window right, switch 6, ABS (anti-lock braking system), traction control system (ASR), rotating beacon, leaf suspension, doors, side door right, environmental badge green Body: Patient transport vehicle with fold-out wheelchair ramp Engine and gearbox overhauled in 08.22, total costs approx. 10,000€. Cgjdpfxjvhixts Aiaeu Sale to tradesmen or export plus 19% VAT! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Year of construction: 2017, condition: excellent (used), machine/vehicle number: SI8x4125, DEMAG KBK crane canopy crane runway with dimensions approx. 6x5m (5m bridge) This crane is available several times ! Payload / lifting capacity 125 KG - 0,125to Cgsdpoupwa Rjfx Aiaju Technical data of the system: Crane runway made of Demag KBK1 + KBK2L rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Crane is with internal power supply incl. 125KG Demag DC chain hoist - lifting height approx. 3.5m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition Cgsdjuprqwopfx Aiaeu

Condition: used, Year of construction: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of Manufacture: 1971 Weight: approx. 4,500 kg General Information / Technical Data: Cgsdpfx Aow E Hpvsiaju 8-station rotary indexing special drilling machine for vertical and horizontal drilling operations in workpieces, with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 3 – Vertical drilling unit, type: BE VK, collet chuck mounting Station 4 – Horizontal drilling unit, type: BE VK, spindle mount: sleeve Ø 36 mm Station 5 – Vertical spindle unit, type: BE VK, spindle mount: sleeve Ø 28 mm Station 6 – Horizontal drilling unit, type BE VK with additional guide, spindle mount: sleeve Ø 28 mm Station 7 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 8 – Vertical spindle unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 28 mm Drilling feed: mechanical feed via quill Rotary indexing table: mechanically indexing, 8 positions, Ø 500 mm Workpiece clamping: manual via collet Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • Machine is designed for high-volume production • Features a robust cast machine table with chip conveyor to the rear and a separate large coolant tank • Extensive range of clamping devices and auxiliary tools included • The machine is equipped with a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Extremely stable machine bed, also ideally suited for rebuilding as a special-purpose machine

Condition: not inspected (used), Year of construction: 1969, Manufacturer: Steinel Model: 6-Station BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical specifications: 6-station rotary transfer special-purpose drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 pcs Station 1 – Loading and unloading Station 2 – Vertical drilling unit, type: BE 10 VK Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK, with additional guide. Mounting: slip bush Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed advance for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary index table: mechanically indexed in 8 positions, Ø 400 mm Workpiece clamping: manual, via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production use Cedew H I R Ropfx Aiaegu • The machine is equipped with a robust cast iron machine table with chip disposal at the rear and a separate large coolant tank (rear outlet) • Safety light curtain (Sick) • Extensive accessories: spare parts, spindle units, and rotary indexing table • The machine features a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Condition: new, Year of construction: 2023, Technical Data INPUT Sensor supply US 24 V DC (EN 61131-2), max. 200 mA (M12 female), short-circuit and overload protected Type for 3-wire sensors or mechanical switches, PNP GENERAL DATA Mounting method 2-hole screw mounting Temperature range 0...+55 °C (storage temperature -20...+70 °C) Protection IP67 Dimensions H×W×D 56.2×63×225 mm DIAGNOSTIC Communication status via LED Diagnostic via BUS per module and channel Diagnostic via LED per module and channel Actuator warning per channel via LED and BUS Monitoring - under voltage yes Monitoring - no voltage yes Short-circuit and overload yes Cable break per port Csdpfxolu E Hme Aiaogu PROFINET Specification V2.2, Conformance Class C (IRT) Addressing DCP FSU (Fast-Start-Up) max. 500 ms PROFINET Netload Class III MRP yes Shared Device yes, for 2 controls CONNECTIONS Fieldbus Ethernet 10/100 Mbit/s; 2× SCRJ45 POF Push Pull Sensor-system/actuator supply Push Pull Power connector, max. 12 A I/O ports M12, 5-pole, A-coded PARAMETERIZATION PIN 4 Input PIN 2 Input 3 pcs available 450€ / pc

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Korimat KA-240 Autoclave Pressure Cooker 230V Gas-operated V2A 21kW 240L Built in 2009 2.5 bar The system is fully functional ready for immediate use. Accessories: 3-part basket Further information available upon request! Cash or prepayment! Sale to businesses only. No guarantee or warranty. Cgsdpfx Ajv Tyu Ajiaou

Condition: new, maximum load weight: 1,680 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,400 mm, loading space width: 1,820 mm, loading space height: 2,000 mm, loading space volume: 12 m³, total width: 2,300 mm, total height: 2,700 mm, Year of construction: 2024, * 230 volt cooling unit * Flat ceiling evaporator * 60 mm insulation * 4 Terra spindle supports * Galvanized V-drawbar * Overrun brake * Sturdy support wheel Csdpfx Aijrb T Nleajgu * Car ball coupling * Interior ceiling light * Scuff plate all around * Alko tandem axle * Double wing door at the rear * Galvanized substructure

Condition: new, maximum load weight: 1,680 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,400 mm, loading space width: 1,820 mm, loading space height: 2,000 mm, loading space volume: 12 m³, total width: 2,300 mm, total height: 2,700 mm, Year of construction: 2024, * 230 volt cooling unit * Flat ceiling evaporator * 60 mm insulation * 4 Terra spindle supports * Galvanized V-drawbar * Overrun brake * Sturdy support wheel * Car ball coupling * Interior ceiling light Cgjdpfx Asrb T Npsiaou * Scuff plate all around * Alko tandem axle * Double wing door at the rear * Galvanized substructure

Condition: new, Year of construction: 2020, Model KPZ-2 Type Closed Working dimensions 900 w. x 1300 h. x 900 d. External dimensions 980 w. x 2100 h. x 1600 d. Operation Electric Power 0,69 kW x 2 Voltage 380 V Frequency 50-60 Hz Filter Polyester Number of filters 3 Filter surface 22,5 m² Fan aluminium Cgsdpfx Aeb Al Sboiasu Fan 74 dBa Air consumption 10,200m ³/h Warranty 12 months Other models KPZ-4 / 6 / 8 / ... on request

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 30 kg, total length: 33 mm, total width: 40 mm, total height: 130 mm, operating pressure: 2 bar, final pressure: 2 bar, warranty duration: 24 months, Pneumatic Vacuum Liquid Filling Machine – Constant Fill Level Cgedpfx Aerivxysiasu This vacuum liquid filling machine operates fully pneumatically and requires no electricity. A small compressor is sufficient to operate the machine. Thanks to the vacuum-controlled constant-level filling principle, each bottle is filled to exactly the same liquid level, regardless of bottle volume variations. This ensures a consistent and professional final result. Compact, Lightweight, and Durable The machine is manufactured entirely from high-grade stainless steel, is compact in design, lightweight, and takes up little space. It is easy to place on a workbench, making it ideal for both production and testing environments. Versatile Applications Suitable for filling both small and larger volumes of liquid products, including: - Water - Perfume - Milk - Eye drops - Oils (such as sesame oil) - Beverages - Alcohol - And similar liquids Efficient Operation The machine is equipped with two filling heads, allowing for continuous operation. Depending on the operator and bottle volume, up to approximately 20 bottles per minute can be filled. Contact & Delivery For questions or further information, please feel free to contact us by email or telephone. Transport within and outside Europe is possible.

Condition: used, functionality: unexamined, machine/vehicle number: DX2TLVKJO, Used Brookfield viscometer DX2TLVKJO in case. Codsxmhbyjpfx Aiasgu

Condition: used, This listing is for the Sigma 2-15 Centrifuge Codpfx Aijxhffreasgu +Accessories Shown The unit is in full working condition and is ready for immediate use The Sigma 2‑15 is a benchtop (tabletop) laboratory centrifuge produced by Sigma (Sigma Laborzentrifugen GmbH), designed for moderate-speed separation tasks across various scientific and industrial settings Key Features & Specifications: Purpose: Used to separate sample components (e.g., cells, sediments) through centrifugal force—ideal when high speed isn't required Power & Voltage: Operates at 240 W, 220–240 V, 50 Hz Speed: Centrifuge motor: up to 13,500 rpm. Rotor-specific max: up to 15,300 rpm, depending on rotor type . Capacity: Typical configuration includes 4 buckets, each capable of holding up to 100 ml (e.g., rotor 11192 with buckets 13012) Some versions deploy a fixed-angle rotor (e.g., 12189) with capacity around 480 g Dimensions: Compact footprint of approximately 33 × 43 × 30 cm (W × D × H) . Other Features: Microcontroller-based control of speed and time. Multiple acceleration/deceleration curves and program memory (up to 10 programs) in some configurations Magnetic rotor identification (prevents overspeeding) and induction drive for low maintenance

Condition: used, Year of construction: 2016, feed length X-axis: 711 mm, feed length Y-axis: 406 mm, feed length Z-axis: 394 mm, Traverses X Y Z ; 711 x 406 x 394mm, Table size 864 x 381mm, table load 113 kgs, rapid feedrates 61m/min, spindle power 15Hp, spindle speed 15,000rpm, spindle taper BT40, 18 station ATC, Haas control, coolant, swarf auger. Codpfx Aiov Sut Rjaegu

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven Cedpfxsw Rn Euo Aiajgu ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Serial No: 3669 ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Serial No: 8293 ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Serial No: KM 765 ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: used, machine/vehicle number: 007667, Max width workable: 1100 mm Max length workable: 2500 mm Cjdpfxou H R Hmj Aiasgu Max height workable: 250 mm

Condition: used, Year of construction: 2006, machine/vehicle number: BM0000029, controller model: WINDOWS XP, number of spindles: 42, plate height: 60 mm, plate length: 2,800 mm, plate width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Vertical CNC machining center for drilling, milling, and dowel insertion with an additional robotic arm for loading! The machine must be picked up between June 10, 2026, and June 30, 2026! The machining center consists of two machines as follows: 1. BIESSE BREMA VEKTOR 15-18 R Working area X-axis: 2,800 mm Working area Y-axis: 1,300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 42 Total number of tool changer positions: 10 Maximum panel thickness: 60 mm Automatic panel loading system Automatic panel stacking system Drilling units Drilling unit 1: Horizontal drilling spindles in X Number of horizontal drilling spindles in X: 9 Drilling unit 2: Horizontal drilling spindles in Y Number of horizontal drilling spindles in Y: 9 Drilling unit 3: Vertical drilling spindles Number of vertical drilling spindles: 24 Milling spindle Number of milling spindles: 1 Number of controlled axes milling spindle: 3 Automatic tool changer: Yes Number of tool magazine slots: 10 Control and safety Control system: WINDOWS XP Machine programming software: BKEEPER Safety standard: EC marking Safety system: Safety light curtains 2. KUKA KR 180 L100-2 K 2000 Maximum panel width: 1,300 mm Maximum panel length: 2,800 mm Maximum payload: 100 kg Number of controlled axes: 6 Arm reach: 3,700 mm Codpfsy Uvnajx Aiaegu Number of panel stacking stations: 3 Control system: KR C 2 EQUIPMENT Automatic panel loading system Automatic panel stacking system Barcode scanner HONEYWELL Protective netting on the machine The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8530

Condition: used, Year of construction: 2011, machine/vehicle number: 0-201-50-1289, operating hours: 7,062 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,400 mm, controller model: POWERCONTROL PC 85, plate height: 300 mm, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC machining center for milling, drilling, and edge banding! The machine must be picked up between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Working area X-axis: 6,000 mm Working area Y-axis: 1,400 mm Maximum panel passage height: 300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Number of controlled axes: 5 axes Number of working stations: 4 Maximum edge height: 65 mm Number of drilling units: 1 Total number of drilling spindles: 21 Total number of vertical + horizontal spindles: 25 Number of milling spindles: 2 Total number of tool changer positions: 77 Barcode reader model: DATALOGIC Work table and workpiece clamping Number of rails: 12 Number of pumps: 1 Vacuum pump flow rate: 300 m³/h Positioning via NC Vacuum cups for workpiece clamping Positioning of vacuum cups via NC Drilling unit Drilling unit 1: Top Vertical drilling spindles: 21 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Total number of vertical + horizontal spindles: 25 Milling units Milling spindle 1: Top Number of controlled axes milling spindle 1: 5 Motor power milling spindle 1: 15 kW Speed milling spindle 1: 24,000 rpm Automatic tool changer Milling spindle 2: Top Number of controlled axes milling spindle 2: 4 Automatic tool changer milling spindle 2: Yes Motor power milling spindle 2: 11 kW Speed milling spindle 2: 12,000 rpm Edge banding unit Number of edge banding units: 1 Maximum panel height: 60 mm Model: POWER EDGE 360° Position: Mounted on the main beam of the machine Number of positions edge roller magazine: 2 Csdpfxsy Uviwe Aiaegu Gluing unit Glue pot for hot melt adhesive Pre-melter for hot melt adhesive Tool magazines Number of tool magazines: 4 Positions tool magazine 1: 72 Position tool magazine 1: On the rear of the machine Positions tool magazine 2: 2 Position tool magazine 2: On the rear of the machine Positions tool magazine 3: 2 Position tool magazine 3: On the rear of the machine Positions tool magazine 4: 1 Use tool magazine 4: Only for saw unit D: 350 mm MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: POWERCONTROL PC 85 EQUIPMENT Work table pod and rail NC-positioned workpiece clamping Vacuum cups Vacuum pump Drilling unit on top 2 milling spindles POWER EDGE 360° edge banding unit Glue pot for hot melt adhesive Pre-melter for hot melt adhesive Edge roller magazine 4 tool magazines Barcode reader DATALOGIC Protective net Chip conveyor CE marking Safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8527

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Cedey Ur Hlepfx Aiaegu Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: used, Year of construction: 1997, machine/vehicle number: 16109, functionality: fully functional, Electrotherm HL-36x50-EQ-2 Vacuum Furnace Chamber (1997) Stokes Vacuum Pump System Digital Display Controller Slide Rail Track Part Entry Cart 1300 Max Temp Cgsdpfsx Ap N Rox Aiaeu Sublocation - Heat Treatment area.

Condition: new, Year of construction: 2026, NEW 2026 – REM SCR 50 CNC 2S | Dual-Head CNC Vertical Turning Center High-performance heavy-duty CNC Vertical Turning Center with two independent milling heads and two disc-type automatic tool changers. Designed for the most demanding precision turning and milling of large workpieces. TURNING ENVELOPE: • Faceplate Diameter: 4,500 mm • Machining Diameter: 4,700 mm (with CE enclosure) | 5,300 mm (open) • Machining Height: 2,100 mm / 3,500 mm • Max. Workpiece Weight: 30,000 kg / 50 tonnes AXIS TRAVELS: • X & U-Axis (Ram Carriage): -100 to 2,600 mm • Z & W-Axis (Ram): 1,250 mm / 1,700 mm WORK TABLE: Cgjdpfjhh Dnxex Aiaju • Faceplate: 4,500 mm with T-slots | Jaw chuck height: 200 mm • Speed: 0–50 rpm • Power (S1): 96 kW / 2×75 kW • Torque (S1): 130,000 Nm / 320,000 Nm • Drive: ZF gearbox reducer + belt transmission MILLING RAMS (Left & Right | 250×250 mm | KM 63): • 2× Independent heads — simultaneous or individual operation TOOLING: • 2× Disc-type ATC (12 stations each — turning + milling) • Maximum tool weight per station specified on request Manufactured by REM Bacau – Romania. New machine, available on order. Delivery worldwide. Contact us for full specs, videos, and pricing.