Used Lacont Trg 1400 for sale (2,108)

Condition: excellent (used), Year of construction: 2025, ♻ Universal use (various wood, pallets with nails, chipboard boards, waste and scrap, veneer, MDF boards, cardboard boxes, plastics, textiles, tires, etc.). ✔ Power: 55 kW Hodpfxjn Nwxfs Al Dsnr ✔ Shaft length: 1400 mm ✔ Shaft diameter: 315 mm ✔ Shaft RPM: adjustable ✔ Number of cutting knives: 60 ✔ Granulation: 15-90 mm ✔ Capacity: up to 17 m3/h* ✔ Filling opening: 1400 x 1800 mm ✔ Dimensions L/W/H: 2,20/3,10/2,80 m ✔ Weight: 7000 kg 2 years warranty or 2000 working hours

Condition: used, Electric pedestrian stacker, pallet stacker JUNGHEINRICH type EJC Z14 250 ZT Serial no. 90358452 Year of manufacture: 2010 Rated load capacity: 1400 kg Load center: 600 mm Rated lift height: 2500 mm Fork length: 1150 mm Overall length: 2050 mm Overall width: 840 mm Overall height: 1700 mm Operating voltage: 24 Volt - Initial lift for negotiating floor thresholds - Duplex mast - 1676 operating hours (readout) - Battery from 2016, type 24V 3PZS 375 (24V/375 Ah) - Automatic charger Jungheinrich 24 volt, 50 ampere - Surcharge for new UVV inspection = 150,-- EUR net Hnjdpfx Aoxvdv Eel Djr Weight: 1200 kg Good condition

Condition: used, Electric pedestrian stacker, pallet stacker JUNGHEINRICH model EJC 214 Serial No.: 90334640 Year of manufacture: 2009 Rated capacity: 1400 kg Rated lift height: 3200 mm Fork length: 1150 mm Overall length: 2000 mm Overall width: 810 mm Overall height: 2050 mm Operating voltage: 24 volt - Duplex mast with 1600 mm free lift - 4356 operating hours recorded - Battery from 2009, type 3PZS 375 (24V/375 Ah) - Automatic charger Jungheinrich 24V, 40 Amp - UVV inspection valid until 11/2025 - Surcharge for new UVV inspection = EUR 150 Weight: 1200 kg Hjdpfovdmxvsx Al Dsnr Good condition

Condition: good (used), Year of construction: 1990, used brushing machine with wacuum table Hjdpfxsd Tanye Al Donr

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter Hnsdpfx Asyxy D Tel Djr - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: used, Year of construction: 2003, functionality: unexamined, ABB IRB 1400 M2000 Robotic Welding Cell – Suitable for Parts or Refurbishment – Ireland Location: Ireland Condition: Used Power: 400V, 3 Phase Complete ABB robotic welding cell featuring an ABB IRB 1400 M2000 6-axis industrial robot with controller, teach pendant, dual-station welding fixture and full safety enclosure. Originally configured as a production robotic welding system (Plant Ref: XRWO11). This system is suitable for refurbishment, retrofit, or breaking for parts and spares. Can be sold complete or dismantled and sold separately. Included in Sale: • ABB IRB 1400 M2000 6-Axis Robot • ABB S4C+ Controller Cabinet (400V 3-Phase) • ABB Teach Pendant • Dual-Station Welding Fixture / Positioner • Robot Pedestal Base Hedpfxoymd E No Al Dsnr • Full Steel Safety Enclosure / Welding Booth Robot Specifications: Model: ABB IRB 1400 M2000 Axes: 6 Reach: Approx. 1.44m Payload: 5–6 kg Repeatability: ±0.05 mm Manufactured in Sweden System is complete as seen in photos. Industrial used condition. Operational status not confirmed. Ideal for buyers looking for spare parts including robot arm, controller, drives, teach pendant, servo motors, or welding fixtures. Components can be removed and sold individually if required. Forklift loading available. Inspection welcome by appointment. Asking Price: €5000+ VAT (or nearest offer) Enquiries welcome for complete system or individual components.

Condition: used, Year of construction: 2003, Single-lane operation: Length A 100 mm - 1240 mm Width B 80 mm - 1400 mm Window/liner length C 60 mm - 720 mm Window/liner width D 30 mm - 1140 mm Double-lane operation: Length A 100 mm - 1180 mm Width B 80 mm - 660 mm Window/liner length C 60 mm - 720 mm Window/liner width D 30 mm - 530 mm Special program for section lengths of 900 mm at production speeds of up to 30 pieces per minute Cardboard 250 g/m² - 800 g/m² Hnsdpfswv D Rfox Al Dsr Corrugated board up to 5 mm thickness Film thickness 0.03 mm - 0.3 mm Roll outer diameter max. 500 mm Roll inner diameter 70-80 mm

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3000x3000x1800 mm Weight 1000 kg Hnedpfjv A E I Hox Al Djr Total power requirement 10 kw

Condition: used, Year of construction: 2002, Opportunity to buy a DEMAG injection moulding machine with 1000T clamping force and 140000 working hours. Can be inspected under power upon appointment. Availability: 06/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Clamping force: 1000 tons Opening stroke: 1250 mm Min. mold height: 500 mm Max. mold height: 1200 mm Distance between tie rods: 1400 × 1120 mm Hodsyq Dqgspfx Al Djnr Plate size: 1950 × 1670 mm Screw diameter: 80–110 mm Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Injection pressure: up to ≈2380 bar Total weight: 72.5 tons (72,500 kg) Total length: 13,184 mm Total width: 3,175 mm Total height: 2,925 mm Max. pressure ($P_{max}$): 190 bar Max. flow rate ($Q_{max}$): 486 l/min System current: 409 A Heating current: 154 A

Condition: like new (used), Automatic pressing line (short cycle), useful to apply veneer, paper or laminates, composed of: Hjdpfxodun Nis Al Djnr V03022) Loader (Portal) "SAG" Double-station (of pick-up) with central motorized rollers table V03023) Brushing machine (to top and bottom clean the panels) "POLIMA"  V03024) Glue Spreader "OMMA" V03025) Motorized Conveyoring Disks way "OMMA" V03026) Preparing table for the panels and motorized in-feed carpet to the press "SIMI" V03027) Short cycle hot hydraulic Press "SIMI IMPIANTI" mm 1400 x 4500, with No. 10 pressing cylinders V03028) Unloader-stacker (Portal) "SAG" Double-station (of storage) with central motorized rollers table

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration Hodpfjuqdi Uox Al Djnr with hydraulic tool clamps on the ram

Condition: ready for operation (used), Year of construction: 1998, Machine come with equepement on picture. Hodjfa S E Ijpfx Al Denr

Condition: excellent (used), Machine package 30 pcs 110V + A voltage converter (110V to 230V), a robust extension cable, and a 4-way socket distributor are included in the price. 1.Hilti TE35 2. Hilti TE 40 AVR 3.Hilti DEG 4. Hilti WSR 1400-PE 5. Hilti DC 230 6. Hilti SD 2500 7. Hilti ST 1800 Hnodjvzcrmopfx Al Dsr 8. Hilti SD 2500 9. Hilti SD 2500 10 Hilti SI 100 11.Kress HMX 24 600W 12.Kress HMX 24 600W 13.Kress HMX 24 600W 14. Hilti TE 6S 15. Hilti DEG 16. Hilti TE2 17. Hilti WSJ 850-ET 18. Hilti WSJ 850-ET 19. Hilti SR 16 20. Hilti SR 16 21.Hilti SR 16 22.Hilti SR 16 23.Hilti SR 16 24. Hilti UD 30 650W 25. Hilti UD 30 650W 26. Hilti UD 30 650W 27. Hilti TE2 650W 28. Hilti TE2 600W 29. Hilti DEG 30. Hilti ST 1800 600W

Year of construction: 2026, condition: new, Specifications: - Performance: 1400 kg/h - Electric demands: 3 kW, 400 V, 6 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 2500x1330x1230 mm - Input height: 1250 mm - Output height: 370 mm - Weight: 1150 kg - IP65 certified electronics - Food industrial, massive polyester belt - Belt: 2mm thick, density: 6x16 filament/cm^2, ½ rate (suitable for large fiber-free juice) - High yield: 75% - depends on the freshness and quality of the fruits - High-pressure washer demand: 500 L/h - Compressed air demand: 50 L/h 6 bar - Built-in inverter: steplessly adjustable belt speed Fully automatic operation, with closed work area, reduces the oxidation to the minimum. In the bottom of the machine, there are two spinning washer heads guarantees optimal cleaning during the process. The distance between the press cylinder and the juice collector tray reduced against foaming. Very easy to clean. With 4pcs vibration-free feet. It requires minimal maintenance. Hsdpfjd Aqznjx Al Donr High-pressure washer and air compressor are essential for operating.

Condition: used, Semi-automatic PET bottle blow molding machine Manufacturer: FERENC Model: F-1400 Year of manufacture: 2006 Output: approx. 800 pcs/h Number of molds in the machine: 2 x 5 L (48 mm cap) Oven dimensions: - Length: 900 mm Hedpfx Aeugu E Rsl Djnr - Width: 900 mm - Height: 1200 mm Blow molder dimensions: - Length: 1800 mm - Width: 750 mm - Height: 2000 mm Set weight: 1200 kg Technical condition: used machine

Year of construction: 1990, condition: ready for operation (used), Now available Used van Aarsen 1400 2D Hammermill incl. feeder with magnet. 200kW 3000 rpm Hnjdpfshbzi Nex Al Dor 2 pieces available Amount of hammers: 272 Weight: ca. 5850kg Sieve Diameter: 600mm More information on request

Condition: new, Sale exclusively within Switzerland. Travel distance X-axis: 1400 mm Travel distance Y-axis: 650 mm Hjdpfxeywtnco Al Donr Travel distance Z-axis: 610 mm Distance from spindle nose to table center: 125 ~ 735 mm Table size (X direction): approx. 1500 mm Table size (Y direction): 650 mm Table load capacity: 1000 kg Spindle taper: BT40 (BT50 optional) Spindle speed: Direct drive 12,000 rpm.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (max.): 36,000 rpm, spindle speed (min.): 12,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. Hnjdpfx Asx S Etmol Dsr > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: good (used), Year of construction: 2010, For sale is a packaging machine of the Boss brand and type Titan 1400 The machine is fully functional and, thanks to its stainless steel surface, is ideal for food packaging. suitable. Technical data Year of construction: 2010 Power: 2.9 KW Interior dimensions: 1360*690*150 mm TÜV: until October 2024 Welding unit available. The offer is without packaging material On request, loading and transport can be organized for an additional charge Hjdpsuaflzsfx Al Dsnr All prices plus VAT B088Itab Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?

Condition: used, Year of construction: 2024, Outstanding Kraus Maffei injection moulding machine from 2024. In perfect condition with only 588 operating hours. Equipped with: 1x pneumatic valve on MOP 1x Hydraulic Power Pack 20l 2x Hydraulic core pull 1x 4-fold water battery Can be inspected under power upon appointment. Immediately available for delivery. More info available on request. Injection unit: 1400 Screw: 60 mm / 23.00 wear protection / 25.50 Min/Max tool installation height: 250/600 mm Max opening Width: 1150 mm Ejector: Platten Ejector EM hydraulix/electric Core Pull: 2 hyd Air valves: 1 MMP Control system: MC P1 Hnjdjx Ald Repfx Al Dsr Power supply: 400 / 230 V 50Hz 3 phase with neutral Clamping force: 2500 kN Injection capacity: 679 cm³

Condition: good (used), clamping force: 3,000 kN, Manufacturer: KraussMaffei Model: KM 300-1400 C2 Machine type: Hydraulic injection moulding machine Year of manufacture: 1999 Clamping force: 3000 kN International size designation: KM 1400 C2 / 300 Machine weight: 12,500 kg CE marking: present Hjdpfx Aoytnnzel Djnr 2 units available Further information on request.

Condition: ready for operation (used), * Brand: SBM Austria * Dim: length 2000 mm - width 1400 mm, * Driving: two pieces vibration motors of each 2,5 kW * Incl.: springs and springsupport. Hnedpeywnczjfx Al Dor

Condition: ready for operation (used), * Brand: Jöst * Model: vibrating chute * Type: FUF * Dim.: length 4500 mm - width 1400 mm * with: two pieces vibration motors of each 9,5 kW Hodsywmqwopfx Al Dsnr

Condition: ready for operation (used), * Brand: Hazemag * Model: vibrating chute * Dim. vibrating chute: length 4000 mm - width 1400 mm. Hnodpfeywmmlsx Al Dor * Driving: 2 pieces vibration motors of each 5,6 kW. * Incl.: springs.

Condition: new, 15000 kg Hnjdpfx Aeyt R I Rjl Dor height 790 - 1350 mm width 1400 mm ja 790 - 1350 mm 120 x 1400 mm Support stand, assembly stand, steel stand, welding table, assembly table, steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. - powder-coated in RAL 5010 gentian blue - CE marking - Transport on request