Used Linck Tpu 600 for sale (11,036)

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 90 mm, total width: 685 mm, total height: 150 mm, total length: 990 mm, conveying length: 990 mm, construction width: 685 mm, construction height: 150 mm, input voltage: 24 V, overall weight: 30 kg, TAF item number: 1000005970 Manufacturer: TAF-Industriesysteme Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 990 x 685 x 150 Width including side rail in mm: 685 Side rail height in mm: 140 Conveyor length in mm: 990 Conveyor width in mm: 600 Conveyor height in mm: 150 Roller pitch in mm: 90 Substructure: not available Support roller shaft type: M8 internal thread Support roller diameter: 50 mm Support roller per axle: 1 Support roller material: Steel Drive: Kyowa Puls Roller Gedsy R D D Iepfx Anxoit Motor type: 24 V motor roller Conveyor speed in m/s: 0.83 m/s Net weight in kg: 30 Condition: used / fully functional Functional test: OK

Condition: used, Year of construction: 2023, load capacity: 5,000 kg, lifting height: 3,770 mm, total length: 5,930 mm, Diesel forklift Giodpfxsy E Ubas Anxst Linde H 50D-01/600 Drive Diesel Year built 2023 Lifting height (mm) 3,770 Lifting weight (kg) 5,000

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2215, Type: OptiFlour 600 II Serial number: 2215 Year of construction: 2013 Belt width: 600 mm Power: 3 x 400V, 50Hz, 5.3kW Dimensions: 2750 x 1650 x 2300 mm Weight: 1025 kg Gjdoymbfajpfx Anxjit GEA OptiAir cyclone Type: OPA Serial number: 515 Year of constuction: 2011 Power: 3 x 400V, 50Hz, 4kW Dimensions: 1350 x 950 x 1800 mm Weight: 450 kg

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Vertical piston compressor with sound insulation hood DK 600Eco UNM STS 660-10-270 - Year of manufacture: 2013 Giodpsypkr Uefx Anxet - With integrated refrigeration dryer, 660 l suction capacity, 520 l output volume - 10 bar - Weight: 245 kg - Sound-damping hood - Condensate drain 4 kW, 400 Volt - Width: 960 mm, Depth: 740 mm, Height: 1905 mm - Noise level: 69 dB (A) - Barely any operating hours - IN ABSOLUTELY AS-NEW CONDITION Transport possible at extra cost!

Condition: like new (used), ROBOT ARM BRAND: KUKA servo controller Godpfxoy R Ac Ne Anxsit 00-134-525 KPS-600/20-ESC

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 300 mm Control Roeders RFM 600 DS table-size 700 x 550 mm spindle tunring speed 42.000 U/min tool taper HSK 40 Gjdpfxsy Ez Efe Anxjit number of tool places 20 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) Gedox R Uw Sopfx Anxeit * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: excellent (used), CTS Model: CS-70/600-5 Climate Test Chamber CTS CS-70/600-5 Water-cooled version With observation window, test specimen protection, and documentation For sale is a high-quality CTS climate test chamber, model CS-70/600-5, suitable for precise temperature, climate, and stress screening tests in research, development, quality assurance, and industry. The unit is in used condition and can be inspected in detail as shown in the images. Current display: manual operation / stop. Operating hours according to display: Technical Data: - Temperature range: -70 °C to +180 °C Gsdpfxoy Hkblo Anxsit - Humidity range: 10% to 98% RH - Dew point range: -10 °C to +94 °C - Test chamber volume: 600 liters - Temperature change rate according to IEC 60068-3-5: - Heating: 6.0 K/min - Cooling: 7.0 K/min - Electrical connection: 400 V 3/N 50 Hz - Nominal power: 14.6 kW - Nominal current: 22.0 A - Protection class: IP 22 - Refrigerants: R404A / R23 - Pre-cooling stage: R404A – 4.5 kg - Cooling stage: R23 – 2.1 kg / 14.5 bar - CO2 equivalent: 17.65 t / 31.08 t - GWP: 3922 / 14800 - Operating overpressure PS: 25 bar - Test pressure PT: 27.5 bar Features / Equipment: - Observation window in the door - Stainless steel test chamber - LED test chamber lighting - CTS LCD control panel with digital controller - Test specimen protection / temperature limiter - Water-cooled refrigeration unit - Automatic water top-up / deionized water inlet - Test chamber and condensate drain - Volt-free contact - Digital outputs - RS232 interface - Ethernet interface - Lateral cable ports Cable ports according to installation plan: - 1x port NW 50 - 2x port NW 125 Test chamber dimensions according to installation plan: - approx. 850 x 850 x 830 mm External dimensions according to installation plan: - approx. 1900 x 1120 x 1875 mm Weight / Mass according to documentation: approx. 750 kg Scope of delivery: - CTS climate test chamber CS-70/600-5 - Including available documentation / test certificates - Delivery includes everything shown in the images Buyer assurance: - The unit can be viewed by appointment. - Loading by forklift can be arranged. - For any questions, please do not hesitate to contact us. Buyer safety information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used (Changes and errors in the technical data reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: C-70/600 CTS Climate Test Chamber C-70/600 Water-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber, type C-70/600, suitable for precise temperature and climate testing in research, development, quality assurance, and industry. The equipment is in used condition and can be inspected fully as per the images provided. Current display shows manual operation / stop, actual temperature 16.59 °C, setpoint 5.00 °C, actual humidity 39.7% r.h., and water reservoir actual value 11.0 l. Technical Data: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Gedoy Hkazopfx Anxsit Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Nominal power: 8.7 kW Nominal current: 14.8 A Protection class: IP 22 Refrigerants: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration unit for low temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Specifications: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Specimen protection / temperature limiter Water connection / deionized water inlet Test chamber and condensate drain Tubing ports on the side of the chamber RS232 interface as per documentation Digital outputs for specimen control Test chamber dimensions (as per documentation): approx. 850 x 850 x 830 mm External dimensions (as per documentation): approx. 1900 x 1115 x 1850 mm Weight (as per documentation): approx. 600 kg Scope of delivery: CTS Climate Test Chamber C-70/600 including available documentation / operating manuals Scope of delivery as shown in the images For your safety as the buyer: The equipment can be inspected by appointment. Forklift loading can be arranged. Additional assurance for you as a buyer: The following measures are undertaken on all chambers offered: 1. Function check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Subject to changes and errors in technical specifications and details!) For further questions, we are happy to assist you by phone.

Condition: good (used), Year of construction: 2000, Chamber Oven Miwe Ideal - Model 600/6R - used - year of manufacture: 2000 - area: 6 sqm - manual control - 6 chambers, each 0.6 x 1.6 m - hood with fan - oil or gas burner Gjdsyzy Eiopfx Anxeit - oven from production - technical condition: good - price on request

Condition: used, functionality: limited functionality, machine/vehicle number: 08703+05443, input voltage: 200 V, input frequency: 50 Hz, RNA Vibratory Bowl Feeder + Vibratory Linear Feeder + Control Units as a Package For sale is a used feeding system consisting of: - Vibratory bowl feeder RNA SRC-N 400-2L - Vibratory linear feeder RNA SLL 400-600 - 2 x Control units RLC 10-A1/B.7/65.4U The feeding systems were used in series (cascade) operation. Single unit sales possible. Condition: Fully functional up to machine decommissioning. Coating for oily parts should be replaced. 1) Vibratory Bowl Feeder Manufacturer: Rhein-Nadel Automation GmbH Type: SRC-N 400-2L Serial no.: 08703 Rated voltage: 200 V ±10% Input type / frequency: 50 Hz Rated current / power: 4.26 A / 852 VA Enclosure rating: IP54 Vibration frequency: 100 Hz / 6000 min⁻¹ 2) Vibratory Linear Feeder Manufacturer: Rhein-Nadel Automation GmbH Type: SLL 400-600 Serial no.: 05443 Dimensions: 630 × 84 × 103 mm Weight: 8 kg Enclosure rating: IP54 Connection cable length: 1.5 m Power consumption: 120 VA Current consumption: 0.6 A Coil rated voltage / frequency: 200 V / 50 Hz Number of coils: 1 Coil type: WZAW 040 Coil color: black Air gap: 1.0 mm Vibration frequency: 100 Hz Number of spring packs: 2 Standard spring arrangement: 2 × 2.0 Total spring arrangement: 4 × 3.0 Spring dimensions: 70(56) × 40(18) mm Spring thickness: 2.0 and 3.0 mm Spring mounting bolt class: 8.8 Spring mounting bolt torque: 12.5 Nm Max. vibration assembly weight: approx. 6 kg Maximum track length: 900 mm Maximum useful load: 1.5–2 kg 3) Control Unit (2x) Type: RLC 10-A1/B.7/65.4U No.: T131603 Enclosure rating: IP54 Input voltage: 230 V Rated voltage: 50–228 V Frequency: 50/60 Hz Power rating: 1380 VA Input current: 6 A Scope of delivery 1x RNA vibratory bowl feeder SRC-N 400-2L 1x RNA vibratory linear feeder SLL 400-600 2x control units RLC 10-A1/B.7/65.4U Price Package price: negotiable €1,250 net Individual prices for separate sale: Vibratory bowl feeder incl. control unit: €1,050 net Vibratory linear feeder incl. control unit: €400 net Location Gsdpfx Aeyzcy Nsnxsit 57439 Attendorn, Germany Notes: Inspection possible by arrangement. Sold used. Subject to prior sale and errors excepted.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 7,078 h, load capacity: 2,500 kg, lifting height: 5,930 mm, free lift: 1,844 mm, fuel type: electric, mast type: triplex, construction height: 2,624 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 5,500 kg, total length: 2,350 mm, drive type: Elektro, construction width: 1,150 mm, Electric 4-wheel forklift Load centre: 500 mm Fork width: 100 mm Fork thickness: 45 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tire type: Superelastic Front tire size: 23x9-10 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 200/50-10 Gisdpfxoya Rmms Anxjt Rear tire condition: 60 - 80% Battery voltage: 80V Battery capacity: 500Ah Battery manufacturer: Hawker Battery year of manufacture: 2021 Sideshift, fork positioner Attachment type (1): IZVG Kaup fork positioner with sideshift 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, DRIVER'S PROTECTION ROOF: COMFORT COMPLETE CABIN / 2160 MM Driver's seat: DELUXE FABRIC CONTROLS: central lever operation Additional hydraulics mast side: DZH mast side / DX, TX hydraulics Vehicle side hydraulics: 2 on chassis side LIGHTING: vehicle lighting Battery watering system: piping for water refill 80V Radio

Condition: good (used), Year of construction: 2001, Distance between centres: 600 mm Centre height: 180 mm Max. grinding diameter: 355 mm Min/max Z-axis feed rate: 0.01 / 15 m/min Z-axis resolution: 0.5 µm Min/max X-axis feed rate: 0.01 / 10 m/min Gedpfx Aney Dz R Ssxeit X-axis resolution: 0.5 µm Grinding wheel left side: 500 x 40 x 203 mm Peripheral speed of grinding wheel: 45 m/sec External grinding spindle drive power: 10 kW Workpiece spindle speed: 0-1000 rpm Workpiece headstock taper: MK 5 Tailstock centre taper: MK 4 Cylindricity adjustment: +10 / -4 degrees CNC control: SIEMENS 840 D Total connected load: 28 kW Machine weight: 5.2 t

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3,678 h, load capacity: 4,500 kg, lifting height: 6,010 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 4-wheel forklift Load center: 600 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Non Marking Front tires condition: 80 - 100% Rear tires type: Non Marking Rear tires condition: 80 - 100% Battery voltage: 80V Battery type: PzS Battery year: 2021 Battery condition: 80 - 100% Gijdoy E Uw Ujpfx Anxjt Sideshift, 3rd valve, 4th valve, rear work light, front work light, heater, road approval (StVZO), full cabin, full free lift, LED,

Condition: good (used), Year of construction: 1997, Ref. -No.: 10619 Manufacturer: KELLENBERGER Type: 600 U Nr. 35 Year of construction: 1997 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0- 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Gijdpfeya Daysx Anxst Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360° ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Gedpfjya Dagjx Anxeit Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Technical condition: good Giedpfx Aey Shn Tenxet Visual appearance: good Please contact Ferdinand Pater for more information

Condition: new, Year of construction: 2026, functionality: fully functional, VALMEC MASTER 600 Brushing Machine BRAND NEW Year: 2026 Technical specifications: Machine equipped with two horizontal units. Manual adjustment of groups with digital display. 2 brush motors, each 4 kW (belt drive). Variable belt speed from 4 to 12 m/min with frequency inverter. Belt motor power: 0.55 kW. Brush units mounted on precision guides. One side of the brush unit is open for processing large parts. Useful working width: 600 mm. Maximum working height: 300 mm. Godpfxsy R Tlbo Anxoit Maximum brush diameter: 210 mm. Complies with CE standards. The machine is supplied with: One steel brush, 600 mm long and 210 mm in diameter. One Tynex grit 80 brush, 600 mm long and 210 mm in diameter.

Condition: used, all stainless steel nett belt length 4.500 mm nett belt width 600 mm overall dimensions (l x w x h) : ± 7.400 x 1.900 x 3.150 mm suitable for thermic oil heating (= 214 kW) with top hold down belt Gedpsy H Dccsfx Anxoit adjustable speed sediment removal system electrical hoists

Condition: used, Code: 0212 Brand: MORBIDELLI Model: AUTHOR 600 K - CE Standard CNC working center with 3 controlled axis for furniture, custom furnishings, carpentry, panels, kitchens, and various - CE Standard Technical data: X-axis working range 3085 mm Y-axis working range 1385 mm Z-axis working range 180 mm Programmable X-axis speed 50 m/min Programmable Y-axis speed 45 m/min Gsdpfxjxnlmpo Anxjit Programmable speed Z axis 22,5 m/min Drilling unit: 10 vertical spindles (6 in X direction - 5 in Y direction) - 2 horizontal spindles X axis - 2 horizontal spindles Y axis - Motor power 2,2 Kw - 4000 rpm Router unit: electric spindle 10 Hp - 18000 rpm - 10-spindle tool changer Engraving blade unit - motor 2,2 kW - - 6000 rpm Work surface: 6 work surfaces with 18 suction cups - 4 loading aids Vacuum pump 100 m³/h Automatic lubrication Xylog numerical control Installed power 17/20 Kw Compressed air 6/7 bar Weight 3000 kg

Condition: new, Sand Gravel Fabrication Plant: Essential Solution for Modern Construction Needs In the construction and infrastructure industry, high-quality sand and gravel are critical raw materials for creating concrete, asphalt, and other foundational elements. A Sand Gravel Fabrication Plant is the cornerstone of producing these materials efficiently and at scale. With advanced technology, versatility, and scalability, these plants cater to a wide range of projects, ensuring consistent quality and meeting the growing demand for construction materials. This article explores the general introduction, features, and applications of sand gravel fabrication plants, including both stationary and mobile systems. General Introduction to Sand Gravel Fabrication Plants A sand gravel fabrication plant is a specialized facility designed to process raw materials such as sand, gravel, and aggregates into construction-grade products. These plants combine various equipment, including crushers, screens, conveyors, washers, and storage units, to convert raw materials into ready-to-use aggregates. There are two primary types of sand gravel fabrication plants: Stationary Fabrication Plants: Fixed installations designed for high-capacity production. Ideal for large-scale operations and long-term projects. Mobile Sand Gravel Fabrication Plants: Portable systems that can be transported to different project sites. Perfect for temporary operations and projects in remote locations. Both types are equipped with advanced machinery and automation systems to ensure high efficiency, precision, and sustainability. Applications of Sand Gravel Fabrication Plants Sand gravel fabrication plants are indispensable across multiple industries due to their ability to produce high-quality aggregates. Key applications include: 1. Construction and Infrastructure Produces sand and gravel for concrete, asphalt, and base materials. Supports large-scale infrastructure projects such as highways, bridges, airports, and railways. 2. Residential and Commercial Development Supplies aggregates for building foundations, driveways, landscaping, and drainage systems. Plays a vital role in residential housing and commercial property construction. Godpfxevlwqlo Anxeit 3. Road Construction Provides high-quality crushed stones and sand for roadbeds, pavements, and highways. Ensures durability and longevity of road surfaces. 4. Mining and Quarrying Efficiently processes mined materials into usable aggregates. Enhances productivity in quarrying operations with optimized material handling systems. 5. Environmental Restoration Supplies aggregates for erosion control, land reclamation, and shoreline protection projects. Facilitates sustainable environmental rehabilitation efforts. 6. Recycling of Construction Waste Mobile sand gravel fabrication plants are ideal for recycling concrete and asphalt. Converts waste materials into usable aggregates, reducing landfill burden and promoting sustainability. Stationary vs. Mobile Sand Gravel Fabrication Plants Stationary Fabrication Plants Best For: Long-term, large-scale projects and industrial operations. Advantages: High-capacity production. Robust and durable structures. Advanced automation for minimal manual intervention.

Condition: new, functionality: fully functional, Features of the system: 1. Chain conveyor belt, 2.9 meters in length (other lengths available upon request) 2. Two custom-made units with fixed form shoulder, tailored to product dimensions 3. Single film loader + automatic film centering device 4. Box motion end sealing unit with single sealing jaw 5. Robust, central fin seal structure 6. Eight servo-driven actuators 7. HMI control panel 8. Four individual temperature controllers 9. Stainless steel 304 housing 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard direction of operation: left to right Technical parameters: Gijdpfxsk Dz Hws Anxjt 1. Product length: L120-600mm 2. Product width: W70-250mm 3. Product height: H20-120mm 4. Packaging speed: up to 60 products per minute (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph, 220V, 50Hz 7. Overall power: approx. 8.8 kW 8. Machine weight: approx. 1100 kg 9. Machine dimensions: approx. 4500 x 1070 x 1590 mm

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,306 h, load capacity: 3,000 kg, lifting height: 5,485 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 4-wheel forklift Load center: 600 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully operational Technical condition: Very good Front tire type: Super elastic Front tire condition: 60 - 80% Rear tire type: Super elastic Rear tire condition: 60 - 80% Battery type: PzS Battery year: 2019 Battery condition: 80 - 100% Godpfx Anoy Et Acexoit Description: The vehicle undergoes UVV (accident prevention) inspection. Before delivery, the machine will receive a service and will be cleaned. Painting available for an additional charge upon request. Sideshift, fork positioner, double pallet fork, 3rd valve, 4th valve, rear working lights, front working lights, heater, fully enclosed cab,

Condition: good (used), Year of construction: 1996, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Travel distances: X= 600, Y= 400, Z= 400 mm Table size: 900 x 480 mm Spindle speed: 40 - 4,000 rpm Giodpfxoy Eyfwj Anxst Dimensions LxWxH: 2500 x 2200 x 2200 mm Weight: approx. 3,000 kg

Condition: used, mileage: 31,506 km, power: 400 kW (543.85 HP), first registration: 06/2025, fuel type: electric, overall weight: 22,000 kg, axle configuration: 4x2, wheelbase: 4,000 mm, energy efficiency: A, color: white, driver cabin: other, gearing type: automatic, suspension: air, Equipment: ABS, air conditioning, cruise control, navigation system, parking heater, traction control, Color: Arctic white, permissible total weight: 22,000 kg, seats with partial Dinamica leather upholstery, black, passenger seat, interior color black, air suspension, 1 x airbag, lift axle, brake assist: Active Brake Assist, Electronic Stability Program (ESP), Traction Control System (ASR), automatic climate control, stationary air conditioning, adaptive cruise control, LED headlights: Matrix headlights, cornering lights, digital radio reception (DAB), USB port, sound system, prewiring for telephone, lane assist, rear-view camera, rain sensor, leather steering wheel, power steering, alloy wheels: aluminum rims 11.75 x 22.5 (front axle) Dura-Bright Alcoa, aluminum rims 9.00 x 22.5 Dura-Bright Alcoa, electric glass tilting/sliding sunroof, tire pressure monitoring, immobilizer, central locking with remote control, underrun protection, CB radio, Comfort Package, work lights: LED lower right and left, ambient LED lighting for driving and living areas, LED daytime running lights, Intelligent Light System, cornering lights, light sensor, attention assist, digital instrument cluster: Multimedia Cockpit Interactive 2, speed limiter: 90 km/h, traffic sign recognition, side paneling, digital exterior mirrors: MirrorCam. eActros 600 – Truck of the Year 2025. SoloStar Concept. Driver air-suspended seat, wide adjustable upper comfort bed and lower comfort bed, PremiumComfort mattress below and above, mattress topper for lower and upper comfort bed, curtain across in front of bed(s), MirrorCam switch at the bed, refrigerator in drawer under bed, table on passenger side, 2 LED gooseneck reading lamps, notebook holder, additional 12 V/15 A socket in passenger footwell, 24 V/15 A socket behind seat, one-piece electric sunblind for windscreen, side sunblinds for driver and passenger, tinted windscreen with sunband filter, flexible storage shelving above windscreen, compressed air connection in cab, Truck Live remote update for driver assistance map (Europe region), Safety Package: Active Safety, Active Sideguard Assist 2, Active Drive Assist 3, distance control assist. Giedpfx Ajy N I N Sjnxet