Used Lvd Mv 31/3.5 for sale (7,246)

Condition: ready for operation (used), Rexroth MGF3-31 / 040RA07VM-A433, part number: R900970908, serial number as shown in the photo, used, normal signs of wear, 100% functional, scope of delivery as per photos. Nodpfx Aloi Eczvjhewh

Condition: ready for operation (used), Siemens 1FU1050-6HF tacho 13.3 mV/min, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nwjdpfxsx Dvbce Alhjh

Condition: ready for operation (used), Baumüller GNF 132 MV Motor SN: 80600154/R1 with Baumüller GHT 612/42 Tachogenerator 00339746 SN: 508006016, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Nwjdpfx Aloy R Ircehoh

Condition: like new (used), Year of construction: 2016, Quaser MV 184 C / 10 B Quaser MV 184 C/10 B machining center with Siemens 828 D control, manufactured in 2016, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. CE compliant!! and has 5,700 spindle hours. Technical data: Year of manufacture 2015 X-axis travel 1,020 mm Y-axis travel 610 mm Z-axis travel 610 mm Control system Sinumerik 828 D Siemens Nedpfx Ajzg Hnfolhowh Main spindle: Max. speed 10,000 min/-1 Drive power - main spindle 15 kW Tool holder SK 40 Spindle bearing diameter 70 mm Distance spindle / table 100 - 710 mm Work table: Table clamping surface 1,200 x 600 mm Max. table load 500 kg T-slots 6x 18 H8 x 100 Tool changer: Number of tool positions 30 Max. tool diameter 76.2 mm Max. tool diameter with free adjacent pocket 125 mm Max. workpiece length 280 mm Max. tool weight 7 kg Tool-to-tool change time 2.5 sec Chip-to-chip change time 4.0 sec Feeds: Feed rate 1 - 24,000 mm/min Rapid traverse (X / Y / Z) 32 / 32 / 24 m/min Total power requirement 20 kVA Machine weight approx. 7.3 t Space requirement approx. 5.0 x 3.0 x 3.4 About the machine: Offered is a Quaser MV 184 C/10 B machining center with Siemens 828 D control, manufactured in 2016. This machining center is in very good original condition. It comes from a company where it was only used a little for training purposes. It has a very easy-to-use control system. The guides are regularly lubricated by the central lubrication system. The Quaser MV 184 C/10 B has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Quaser MV 184 C/10 B on-site while it is powered up. You can find more milling machines from well-known manufacturers on our website.

Condition: used, maximum load weight: 33,540 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2016, next inspection (TÜV): 02/2026, loading space length: 7,700 mm, loading space width: 2,350 mm, loading space height: 1,500 mm, loading space volume: 26 m³, total width: 2,550 mm, total height: 3,200 mm, Year of construction: 2016, Vehicle No.: 062-26 Langendorf Tipper Box Body Model SKA 24/30 * First registration: 05.2016 * BPW axles * Lift axle * Drum brakes * Tyre tread approx. 60-70% * Unladen weight: 5,460 kg * Payload: 33,540 kg * LED work lights * Roll tarpaulin * Steel chassis * Aluminium box body * (WITHOUT supports) Inspection possible at any time during our opening hours, test drive after prior arrangement! For export sales, a deposit will be retained and refunded after receipt of the confirmation of arrival. Company or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of extra features. Nwsdpfx Alsyrvn Hohoh All information is provided without guarantee – subject to errors, changes, misprints and prior sale. Vehicle descriptions expressly do not constitute guaranteed characteristics. We refer to our terms and conditions and request that you take note of them.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sander (wet-type) equipped with 2 top-mounted sanding units and a brush unit (Scotch-Brite). The machine is used for surface processing of metal parts up to 450 mm wide. Njdpfx Aeyn E H Rslhewh The dust collection container with filter fleece is located underneath. The machine is in good, partially overhauled condition. Further technical information can be found in the documentation.

Condition: used, Year of construction: 1993, machine/vehicle number: 36100011, total length: 1,950 mm, total width: 800 mm, total height: 1,500 mm, space requirement length: 2,150 mm, space requirement width: 800 mm, space requirement height: 1,670 mm, power: 22 kW (29.91 HP), fuel type: electric, volume flow: 210 m³/h, operating pressure: 8 bar, pressure (min.): 8 bar, pressure (max.): 8 bar, rotational speed (max.): 4,400 rpm, rotational speed (min.): 4,400 rpm, Equipment: documentation/manual, type plate available, Franz compressed air compressor For sale due to restructuring Nwjdszgchhspfx Alhsh Fully functional until recently Inspection possible Loading onto a truck is possible

Condition: used, Collet set, rotary tool chuck collet holder for draw-in collets Collet chuck, collet holder, collet system Nedpfx Alezbhu Dohewh Suitable for BOLEY - LEINEN - SCHAUBLIN - WEILER Draw-in collet type: 367E K28 DIN 6341 Collet diameter: 28 mm Collet length: approx. 105 mm Collet thread: TR 28 x 1.5 mm Collet taper: 40° - Draw tube with internal thread M 28 x 1.5 mm, handwheel for manual tightening of the collet - Length of draw tube to stop collar inside the handwheel: 457 mm - Outer diameter of draw tube: Ø 31 mm over a length of 390 mm, Ø 32.5 mm over a length of 67 mm - 31 draw-in collets: Ø 1 / 2 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9.5 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 20.5 / 21 / 22 / 23 / 24 mm Total weight: approx. 10 kg Good condition

Condition: used, Year of construction: 2011, AXES Working Range X-Y-Z Axes * mm 3050-1300-180 Workpiece length for pendulum operation mm 1390 Nedjyymz Ujpfx Alhewh Stroke X-Y-Z Axes mm 3460-1735-250 Max. traverse speed of X-Y axes m/min 60 WORK TABLE Number of workpiece supports and vacuum cups 6 / 2 standard type Standard end stops / position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles std/quantity/speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles std/quantity/speed 1/min 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power std./opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer traveling with unit carrier in X 4 places, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction connection diameter mm 150+150 (200) Machine weight Kg 3000 * X: distance between stops; Y: milling center as reference point; Z: workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center, C-frame design, and worktable with adjustable workpiece supports and vacuum suction cups, for: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutter in the “X” direction - General milling work Self-supporting structure and work table Structure made from welded steel construction with control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV carrier options. Box construction made from cold-rolled steel with internal stiffening ribs and protective devices comprising a drilling head with vertical spindles, horizontal spindles, an integrated grooving and saw unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Movement paths of the portal and unit carrier Movement in the X, Y, and Z axes is via linear prismatic guideways with preloaded ball bearings. The X-axis movement (moving gantry) uses a preloaded, backlash-free rack-and-pinion drive with helical gearing. Movement of the unit carrier in Y and Z directions is also preloaded for precision. Positioning of the working units and machine function control is through "brushless" AC servo motors and digital drives. CNC CONTROL The control unit comprises a numerical control for the milling and drilling machines and a PC with a graphical user interface "XILOG PLUS". PC office operating system Windows XP - 17" LCD color screen - QWERTY keyboard - Swiveling control panel - Machine interface: Xilog Plus software Xilog Plus Features Programming - Parametric, graphical, and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation on three axes, spatially linear, spirally on selected plane - Supported programming with graphical and syntax assistance for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on slanted or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - S

Condition: used, TECHNICAL DETAILS TABLE - Table dimensions : 3100/800 [mm] - Maximum weight upon table : 7000 [kg] - Travels on X/Y/Z axes : 3000/1000/1200 [mm] - Rapid traverses rates (X/Y/Z) : 15000/15000/15000 [mm/min] Nwodpfxsw Tnhbe Alhoh MILLING HEAD Manual head MILLING SPINDLE - Tool holder type : ISO50 * Spindle speeds : 4000 [rpm] * Spindle power : 27 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 WEIGHT & DIMENSIONS - Machine floor space : 7913/5043 [mm] - Machine height : 3440 [mm] - Machine weight : 13410 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 38 [kW] MACHINE HOURS - Number of hours under power : 24689 [h] - Number of working hours : 23809 [h] - Number of spindle hours : 7658 [h] EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel Interface : RS232/RJ45/USB - Interactive programming - Coolant tank - Tool-holders

Condition: used, TECHNICAL DETAILS - max. diameter of tapping and threading : M6 - max. length of stroke : 20 [mm] - number of spindle revolutions with interchangeable gearboxes : 4200, 2700, 1600, 1050, 620 [rpm] - power : 0.5 [CV] - number of revolutions : 1400 [rpm] - brake motor protected against overheating by 3 pilotherms Nsdpfevu E S Aox Alhewh

Condition: used, TECHNICAL DETAILS - max. diameter of tapping and threading : M6 - max. length of stroke : 20 [mm] - number of spindle revolutions with interchangeable gearboxes : 4200, 2700, 1600, 1050, 620 [rpm] - power : 0.5 [CV] - number of revolutions : 1400 [rpm] - brake motor protected against overheating by 3 pilotherms Nwedpfxjvu E Svj Alhjh

Condition: excellent (used), color: black, lifting height: 31,000 mm, Year of construction: 2018, operating hours: 1,940 h, Weights Empty weight: 3.475 kg Functional Lifting capacity: 1.600 kg Dimensions of cargo space: 900 x 199 x 258 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Maximum lifting capacity at end of jib: 350 kg Delivery terms: EXW Production country: DE Additional information Nwsdpfsxxaxbox Alhjh Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Paus PTK 31 * 2018 * Diesel * 31-meter hook height * Remote control * Automatic outrigger * 24.5-meter horizontal reach * 1600 kg lifting capacity * 3475 kg net weight * Wheel drive via remote control * Documents included

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 5,700 kg, maximum load weight: 33,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,700 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 31 m³, total length: 9,090 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis, saddle, and tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 king pin Curved front panel, patented 24 tons, 2-stage support winch, single-sided operation, with straight lower part, without extension compensation Chocks with holder Rear underrun protection, foldable Semi-shell mudguards Integrated mudguard holder, surface designed to repel stones With anti-splash flaps, only on the last axle Tarpaulin rod with holder Towing hook at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line compressed air brake system, color-coded lines for easy service Spring-loaded parking brake 2 fail-safe coupling heads in the front, without connection line EBS, electronic brake system with EBS socket in the front, without connection cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! Nedoi Rivdopfx Alhowh With lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side lights") 2 x 7-pole fail-safe sockets in the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw sleeve, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Dump body Steel round dump body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinder mount. Inside with access ladder on the front wall. Greenline - conical and aerodynamic dump body shape Shovel and broom holder on the outside of the front wall Membrane - rear wall Rear wall as a pivoting flap with double-hinge hinge, externally mounted with double hook lock. 2 clamping screws with toggle closures on the lower side. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with access ladder, connection plate for air/electrical and brake connections with ample space for the best possible operation. Rollover cover on one side for storage on the right-hand side, with central locking on the left-hand side Country of registration/plates Germany Type approval according to EC 2007/46 Superstructure strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust-through" Support legs, black coated Dump body, RAL color of your choice, single color Rollover cover,

Condition: new, bending length: 1550sheet thickness: 3.5upper roll diameter: 110 Nsdpsd Ab N Dofx Alhewh Technical specifications: - Back roll with motor - Cone bending device - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.166,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 995,-- - Special voltage EURO 480,-- - Material feeding table - Lower roll is powered by electric motor We have many references!

Condition: used, Technical details: lifting capacity: 1,0 t Arm length: 3500 mm height lower edge cantilever arm: 3900 mm cantilever arm length from center column: 3750 mm lifting height max. hook position: 4000 mm column diameter: 400 mm total power requirement: 0,76 kW dimensions L x W x H: aufgebaut: 4,2 x 0,84 x 4,25 m Column-mounted slewing crane with small foot flange octagonal 750 x 750 x 21mm - operation floor-operated pendant control - slewing electric/motor driven - jib LxWxH: 4100 x 125 x 300mm The crane is equipped with a new electric chain hoist STAR LIFTKET 1,0 to with electric trolley. Type 1000/2-4/1 Njdeu Nxnkjpfx Alhewh Design 1000/2-4/1; lifting height 4.0m, lifting speed 4/1 m/min. Function: electric driving on carrier, up and down, as well as swiveling. without clamping plate! *

Condition: good (used), Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Working height min/max mm 10/100 Nwjdpfjwiv Dksx Alhjh Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Weight kg 1500

Condition: good (used), Code: 0013 Brand: COSMEC - ITALY Model: SA/31-10 - CE Standard 3-axis CNC working centre with NESTING table for wood, furniture, panels, plastics, composites and various materials - CE Standard Table NESTING dimensions mm 3100 x 1000 X axis stroke mm 3250 - Y axis stroke mm 1400 - Z axis stroke mm 300 Feed speed X - Y mt/min 56 Feed speed Z mt/min 12 Maximum clearance above worktable mm 250 Milling unit Hp 10,7 (Kw 7,9) - ISO30 attachment at 18000 rpm Automatic tool changer with 6 positions - Inverter power Kw 11 - Rpm 500/18000 Vacuum pump 100 mc/h Numerical control OSAI series 10 Automatic lubrication Side guards Compressed air 8 bar Weight kg 3200 Nwedpjvur Ausfx Alhsh

Condition: used, This listing is for the Jenway 3520 bench‑mounted laboratory pH/mV/temperature meter The unit is in full working condition and is ready for immediate use The Jenway 3520 is a bench‑mounted laboratory pH/mV/temperature meter designed for precise measurement and recording of hydrogen ion concentration (pH), redox potential (mV), and solution temperature in scientific, QC (quality control) and GLP environments. Key Features Nwsdpfjyk Evqox Alheh Measurement Capabilities - Measures pH, mV (redox potential) and temperature simultaneously. - High resolution: up to three decimal places (0.001 pH) for detailed accuracy. - Wide pH range: typically –2.000 to +20.000 pH units. - Temperature range from approximately –10 °C to +105 °C. Calibration & Buffer Recognition - Supports 1, 2, or 3‑point pH calibration for flexible accuracy. - Automatic or manual buffer selection, compatible with DIN, JIS and NIST standards. Data & Logging - Built‑in data logger can store up to 500 readings, with options for printing or exporting via interfaces. - GLP support includes calibration reminders, security‑protected user data, and multiple alarm options. Display & Interface - Backlit LCD display shows readings clearly. - Communication via analogue output, RS‑232 serial port and optional IrDA (infra‑red) printer interface. Additional Functions - Multi‑language menu options. - Alarm outputs (audible and open‑collector) for set thresholds. - Option to wall‑mount or bench‑top install. ----- Typical What’s Included Depending on the specific kit or version you buy, the meter often comes with: - Glass combination pH electrode - Automatic Temperature Compensation (ATC) probe - Buffer sachets (pH 4, 7, 10) - Electrode stand and holder - Power supply (230 VAC / UK or 120 VAC versions available) ----- Typical Applications The 3520 is suited to: - Routine pH analysis in research and industrial labs - Quality control and regulatory compliance testing - Monitoring & logging in process environments - Scenarios where traceable, high‑precision data is needed ----- If you want detailed user‑manual specifications (e.g., calibration procedure, wiring diagrams), I can help find or summarize that too!

Condition: used, mileage: 4,91,600 km, power: 300 kW (407.89 HP), first registration: 10/2005, fuel type: diesel, empty load weight: 18,440 kg, maximum load weight: 7,560 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: engine braking, color: red, driver cabin: day cab, gearing type: other, emission class: euro3, suspension: steel-air, loading space length: 7,500 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, trailer coupling, Mercedes-Benz Actros MP2 2541 6x2 flatbed truck with crane First registration: 10/2005 491,600 km with documentation Short cab EPS Telligent transmission with clutch Air conditioning Air suspension on rear axle Steerable 3rd axle Trailer coupling Tires 385/65 R22.5, tread depth approx. 50% Tires 315/70 R22.5, tread depth approx. 50% Flatbed: 7500mm Unladen weight: 18,440 kg Effer 310 crane + jib Year of manufacture: 2005 Radio remote control 4-point outrigger 11 hydraulic extensions in total Main crane: 6 hydraulic extensions 2.36 m / 10,500 kg 4.34 m / 6,140 kg 6.24 m / 4,010 kg 8.24 m / 2,850 kg 10.32 m / 2,140 kg 12.49 m / 1,690 kg Nwsdpfx Aljzd Amfshjh 14.72 m / 1,390 kg 16.95 m / 1,200 kg Hook height without jib approx. 20.50 meters + Fly jib: 4 hydraulic extensions + 1 mechanical 19.75 m / 390 kg 21.30 m / 335 kg 22.97 m / 300 kg 24.37 m / 265 kg 25.77 m / 230 kg 27.35 m / 180 kg (mechanical extension) Hook height approx. 31 meters Export / net price: 55,900 Euro All information is provided without warranty, errors and omissions excepted.

Condition: used, mileage: 4,91,600 km, power: 300 kW (407.89 HP), first registration: 10/2005, fuel type: diesel, empty load weight: 18,440 kg, maximum load weight: 7,560 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: engine braking, color: red, driver cabin: day cab, gearing type: other, emission class: euro3, suspension: steel-air, loading space length: 7,500 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, trailer coupling, Mercedes-Benz Actros MP2 2541 6x2 flatbed truck with crane First registration: 10/2005 491,600 km with documentation Short cab EPS Telligent transmission with clutch Air conditioning Air suspension on rear axle Steerable third axle Trailer coupling Tires 385/65 R22.5, tread depth approx. 50% Tires 315/70 R22.5, tread depth approx. 50% Flatbed: 7500 mm Unladen weight: 18,440 kg Crane: Effer 310 + jib Year of manufacture: 2005 Radio remote control 4-point outrigger system 11 hydraulic extensions in total Main crane: 6 hydraulic extensions 2.36 m / 10,500 kg 4.34 m / 6,140 kg 6.24 m / 4,010 kg 8.24 m / 2,850 kg 10.32 m / 2,140 kg 12.49 m / 1,690 kg 14.72 m / 1,390 kg 16.95 m / 1,200 kg Hook height without jib: approx. 20.50 meters + Fly jib: 4 hydraulic extensions + 1 mechanical extension 19.75 m / 390 kg 21.30 m / 335 kg 22.97 m / 300 kg 24.37 m / 265 kg 25.77 m / 230 kg 27.35 m / 180 kg (mechanical extension) Hook height: approx. 31 meters Export/net price: 55,900 Euros All information without guarantee, subject to change. Nwodpfx Alszd Amlohoh

Year of construction: 2020, condition: excellent (used), Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Case: made of stainless steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 112JM/31/4/6/223S D160L -Power: 15 kW 1465 rpm -Number: 3x fan available -Price: per piece -Dimensions: 1350/1350/H830 mm -Weight: 300 kg/piece Nedoxd Tr Sjpfx Alhjwh

Condition: used, power capacity . kW feed pressure . bar liter capacity 750l Tank l Operating Hours: 79,000 Tank Capacity: 750 l | Year of Manufacture: 2020 The technical specifications provided are based on information from the manufacturer or operator and are therefore non-binding for us. We reserve the right of prior sale; our General Terms and Conditions of Business and Sale apply exclusively. About Us Over 400 machines in our own inventory Over 15,000 m² of warehouse space; crane capacity: 70 t Over 10,000 accessory items for your workshop If you are looking to sell machinery, production lines, or your entire business, please do not hesitate to contact us. Nedpfx Alezdca Hshowh You can find additional listings on our website. Inspections are available by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), machine/vehicle number: 2925, Year of construction: 2006, load capacity: 45,000 kg, lifting height: 15,300 mm, mast type: telescopic, total length: 11,700 mm, total width: 4,170 mm, operation weight: 71,400 kg, additional equipment features: Automatic Greasing System for spreader and inner boom, Dual tread, Fire extinguisher , Front mud guards, Hydraulic sliding cabin, Warning triangle, Centralized greasing system, Equipment: lighting, SMV SC45-31 TB5 from Uniktruck Nodpfxeyuhygo Alhswh Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 18.00-25 Wheel size – Steering wheel: 18.00-25

Condition: used, Installation of power converter for switching and rectification Nsdpfx Alozdu S Tohowh The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team