Used Mössner Sm/400 for sale (20,108)

Condition: used, machine/vehicle number: 5772, Rotor diameter: 300 mm Rotor width: 500 mm 3 x 2-knife rotor 2 rows of stator knives Dkodpjyr Tp Isfx Adrjr Infeed cross section approx. 300 x 500 mm Drive motor: 37 kW Machine with roller infeed

Condition: used, machine/vehicle number: 8799, Inlet: 400 x 800 mm Rotor diameter: 400 mm Width: 800 mm Rotor blades: 5 Dkjdpfx Adeyr I Hborjr Stator blades: 2 Drive: 45 kW Sprue mill, granulator, plastic mill, cutting mill

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Djdpfsuzn Nnsx Adrekr Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: Dkodpfx Aozryt Ssdrsr - Length: 950 mm - Width: 600 mm - Cutting height: approx. 60 mm - Motor: 2.2 kW - Connection: 16 A / 400 V

Condition: used, Year of construction: 2003, Technical details: turning diameter: 640 / 400 mm turning length: 1500 mm control: Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z: 550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis): ±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/24/60 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 12 / 23 kW Torque of milling spindle: 100 Nm Tool magazine for milling spindle (turret 1): 120 HSK-A 63 Tool change time tool/tool, milling spindle: 1,6 s Spindle 1 RPM: 4000 1/min Spindle 1 power: 36/ 45 kW Spindle 1 Torque: 730 Nm Spindle 1 max. bar diameter: 90 Spindle 2 RPM: 4000 1/min Spindle 2 power: 36 / 45 kW Spindle 2 torque: 730 Nm Spindle 2 max. bar diameter: 90 c-axis: 0,001 ° Travel turret 2 x: 225 mm Travel Turret 2 z: 1595 mm RPM of rotary tools turret 2: 4000 1/min no. of tools in turret 2: 12 VDI 40 high-pressure pump: 20 bar total power requirement: 110 kVA weight of the machine ca.: 24 t dimensions of the machine ca.: 9,3 x 4,6 x 3,1 m Accerories Chip conveyor Automatic door High performance turning and milling center with milling head (X, Y, Z, B-Axis), tool magazine with 120 pos. HSK-A 63. Excellent for manufacturing excentric parts. Coolant system with 1000 l tank and coolant system 4 kW. Both spindles have differencial pressure clamping system Steayrest for lower turret dia 8-101 mm. Dsdpjyv Dnkefx Adrskr Parts gripper for turret No. 2 with 3-jaw chuck for parts with max. dia. 140 mm. Conveyor belt for finished parts. Preparation for 3D-probe Toolmonitor Artis Machine can be shown under power. *

Condition: good (used), Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic unit -Hydraulic tank: Hydraulic tank for hydraulic unit Dodpfxov Uxw Es Adrskr -Hydraulic tank: with level and temperature indicator -Motor mount: Ø 120 mm / bolt circle Ø 145 mm M6 -Individual components: see photos -Dimensions: 490/400/H515 mm -Weight: 25 kg.

Condition: used, Year of construction: 1987, pressure 400 t table length 2500 mm Dodpfxjzrpuxj Adrekr table width 2000 mm Distance between columns 2000 mm Stroke 2600 mm Distance table/ram, stroke up 2500 mm Table surface area 2000 x 2500 mm Table height above floor 1120 mm Ram surface 2000 x 2500 mm Side window 1500 mm max. capacity of swivelling ram plate 20 t Oil volume 1000 l Power capacity 48,0 kW Weight 85,0 t Dimensions (WxDxH) 8,6 x 5,3 x 8,2 m with swivelling ram, movable table, inclining table, ejector in table stored in dismantled condition - Video at seller's site before dismantling available

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min Djdpfxozrpt Ue Adrokr distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: used, Year of construction: 1976, pressure 400 t stroke 30 - 300 mm no. of strokes 55 /min throat 500 mm passage to the back 800 mm Dkjdjzrpqgopfx Adrer dayligth 950 mm table surface area 1580 x 1000 mm hole in the table 400 x 400 mm table height over floor 800 mm ram surface 1000 x 720 mm ram adjustment 125 mm power requirement 37,0 kW Weight 25,0 t dimensions (WxDxH) 2,5 x 3,1 x 5,1 m with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic counterbalance in ram, fix table, motorized central lubrication, two-hand operation

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 09/2027, total length: 750 mm, overall weight: 285 kg, total width: 640 mm, total height: 1,650 mm, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 285 kg, Reconditioned Rego SM 4 RMT mixing machine Rego model: SM 4 RMT, reconditioned Mixing machine with timer control The machine for all your mixing needs! 2 working functions: 1 x mixing / 1 x whipping Working shaft/mixing shaft newly refurbished Powerful and robust technology Cauldron lighting, timer Connection 400V, 16A CEE plug Used machine, reconditioned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Optional: Additional accessories Ring gas burner New cauldron New whipping whisk or mixing whisk Cauldron ring Maintenance contract Service package Delivery service Training & commissioning Dedpfxjxiu Hzo Adrjkr Come and visit us!

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 09/2027, total length: 1,140 mm, overall weight: 285 kg, total width: 800 mm, total height: 1,620 mm, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 285 kg, Beating machine Rego SM 2000 M The machine for all beating applications! Mixing machine with timer control 2 working functions: 1 x mixing / 1 x beating Manual kettle lift Simple technology Connection: 400V, 16A CEE plug Used machine, refurbished With warranty + spare parts service + Quality from a specialist company! Benefit from over 35 years of experience! Options: New kettle New beater Ring gas burner Dodow Tqihepfx Adrekr Maintenance contract Service package Delivery service Instruction / Commissioning Visit our large exhibition of bakery machines!

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-400-70 Year of manufacture: 2010 Serial number: 214269 Dkjdpfx Aex Eirwjdrsr Control system: Control system: Arburg Selogica Direct Operator panel: operator terminal Control cabinets: complete control and power supply cabinets Clamping unit parameters: Clamping force: 400 kN Injection unit parameters: Screw diameter: 18 mm Part handling system: Manufacturer: ARBURG Type: Multilift Number of axes: 3-axis extraction robot Moulded part transport: Cycle conveyor – length/width: 2,000 × 800 mm

Condition: used, Distance between centers 750 mm greates pass round over bed 400 mm swing diameter over slide rest 230 mm bed width 300 mm spindle bore 51 mm spindle tunring speed 66 - 2.000 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Djdpszrh Rfofx Adrokr Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: used, Year of construction: 2015, Volume flow / delivery rate (depending on pressure variant): at 8 bar: approx. 0.34 1.24 m/min (or up to 1.01 1.2 m/min) at 10/11 bar: approx. 0.34 1.04 m/min at 13/15 bar: approx. 0.30 0.78 m/min Maximum overpressure: selectable, 8, 11, or 15 bar Dkodpszrtr Usfx Adrsr Equipment & dimensions: Compressed air tank: 270 liters (underslung) Refrigerant dryer: Integrated (environmentally friendly refrigerant) Sound pressure level: approx. 63-66 dB(A) (quiet operation) Dimensions (W x D x H): approx. 630 x 762 x 1100 mm Weight: approx. 220-240 kg (varies slightly depending on the model) Electrical connection: 400 V / 3 phases / 50 Hz

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, total height: 1,210 mm, total width: 430 mm, total length: 1,200 mm, overall weight: 133 kg, type of cooling: water, electrical fuse: 32 A, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 360 A, protection type (IP code): IP23, welding current (min.): 20 A, welding current (max.): 400 A, input frequency: 60 Hz, Equipment: documentation/manual, Are you looking for a high-end MIG/MAG pulsed system for demanding industrial applications? The Merkle HighPULSE touch 400 DW combines state-of-the-art inverter and pulse-arc technology with intuitive touch operation, high power reserves, and a water-cooled system – ideal for steel, stainless steel, and aluminum in series and quality production. ✓ Pulse-Arc technology up to 400 A Controlled droplet transfer, less spatter, and reproducible seams – even with demanding materials. ✓ Intuitive touch operation: Djdpfoy U D E Tex Adrokr Fast parameter setting, saved jobs, and clear process guidance for efficient workflows. ✓ DW design with water cooling. High duty cycle and process stability under continuous load – ideal for industrial welding tasks. Areas of application: ✓ Series production in mechanical and plant engineering ✓ Aluminum, stainless steel, and steel structures ✓ Automated and manual welding workstations Scope of delivery: HighPULSE touch 400 DW power source, integrated double wire feeder, water cooling unit, water-cooled MIG/MAG torch, ground cable with clamp, 3×400 V power cable, operating instructions, etc. Special accessories: DeepArc ColdMIG HighUP Interpulse Automated Connector, 6-pin

Condition: good (used), Year of construction: 2008, operating hours: 26,033 h, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 75 mm, displacement volume: 1,657 cm³, injection pressure: 2,022 bar, total length: 7,200 mm, total width: 1,750 mm, total height: 2,420 mm, overall weight: 16,400 kg, clamping force: 4000 kN distance between tie-bars h x v: 710 x 710 mm size of mould plates h x v: 1010 x 1010 mm min. mould height: 300 mm max. mould height: 710 mm max. open daylight: 1380 mm opening stroke: 670 mm screw diameter: 75 mm swept volume: 1657 ccm injection pressure: 2022 bar Dedszgt I Sspfx Adrjkr measures of machine l x w x h: 7.2m x 1.75m x 2.42m total weight: 16400KG

Condition: good (used), Open-end wrenches, ring wrenches as remaining stock Dsdpfx Adox Swarorokr -Open-end/ring wrenches: various sizes, with transport case -Weight of tool: approx. 400 kg -Manufacturer: various brand manufacturers, see photos -Submission/Price: complete -Transport box: 1200/810/H350 mm -Total weight: 466 kg

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 850 mm, travel distance Z-axis: 315 mm, spindle motor power: 58,000 W, spindle speed (max.): 4,000 rpm, total height: 3,000 mm, total width: 4,500 mm, overall weight: 9,000 kg, product length (max.): 9,500 mm, number of axes: 2, Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine. - Turning Diameter: 400 mm- Swing Diameter: 420 mm- Spindle Head: DIN 55026 - Size 11- Spindle Bearing Diameter: 140 mm- Rapid Traverse X + Z Axes: 45 / 30 m/min- Feed Force Z/X: 11 kN- Total Power Requirement: 58 kW- Installed Power (Nameplate): 54 kW- Frequency: 50 Hz- Voltage (Power): 400 V- Control Voltage: 230 V- Nominal Current: 104 A- Cos Phi: 0.83- Fuse Protection: 125 A- Features: Hard turning, Dry machining, Chip conveyor Technical Specification Driven Tools No Dkjdpfx Adozrnwreror

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips Dkedpfxer Ak Rgs Adror TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: good (used), Year of construction: 1992, functionality: fully functional, WEIMA TH 400 briquetting machine - after technical overhaul - Made in Germany - very good condition - year of manufacture 1992 TECHNICAL PARAMETERS: power of main engine 7.5 kW machine output approx. 80 kg/h briquette diameter 50 mm feeding dimension 2000 x 1800 mm adder feeding the material to the piston stirrer machine overall dimensions (length / width / height) 240 / 190 / 200 cm weight ~ 850 kg TH hydraulic briquetting machines are compact equipment for briquette production. Briquetting machines can be filled manually or automatically directly into the hopper. The units of this series, by their small size and quiet operation, are ideal for setting up on the production floor. Characteristics: - reduction of production waste volume - low purchase costs - low energy consumption - compact design takes up little space - excellent processing quality - durable construction and long service life - trouble-free maintenance and low consumption Dkjdpfxjt U Et Ns Adrer - simple operation The main application scopes of briquetting presses are, for example: - in combination with a dust extraction or filtration and dedusting plant - for manual feeding of material - as a whole combined with a chipper (e.g. WEIMA WL4) - with a screw feeder or conveyor belt - with a mobile dust extraction system or combustion furnace

Condition: like new (used), Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - width of the finished element min 700 mm - cutting height min / max - 20/140 mm - disc diameter 600 mm - spindle diameter 30 mm - engine power 2 x 7.5 kW - feed roller table 2570 mm width of rollers 500 mm diameter 100 mm - diameter of connections 2 x 160 mm Dedpfxomv Ehzj Adrokr 3 Multisaw Storti Multibi R 16 - material width max 150 mm - material height max 140 mm - engine power 2 x 22 kW - disc diameter max 300 mm - spindle diameter 50 mm - spindle height 160 mm - hydraulically adjustable feed - hydraulic side material pressure - two upper pneumatic clamps - connector diameters 2 x 220 1 x 160 mm - receiving conveyor 2000 mm - cross conveyor table 3200 x 1100 mm

Condition: used, Year of construction: 2010, functionality: fully functional, – Polish manufacture – Very good condition – DTR documentation – Year of manufacture: 2010 – Vibrating trough – Autoreverse TECHNICAL PARAMETERS: – Inlet width: 400 mm – Inlet height: 120 mm – Main motor: 37 kW – Feed motor: 2 x 1.5 kW – 2 knives Dsdpfx Asw H Rp Nsdrekr – Screen: 50 mm x 50 mm – Vibrating feed table (length / width): 4500 / 430 mm – Vibrating trough motor power: 3 kW – Upper toothed feed roll – Lower toothed feed roll – Hydraulic cover for feed rolls – Rotor diameter: 400 mm – Rotor length: 430 mm – Dimensions (L/W/H): 650 x 200 x 190 cm – Weight: ~ 2500 kg

Condition: good (used), Year of construction: 2008, operating hours: 195 h, machine/vehicle number: GS000155, Size 36 x 52 cm, Alcolor dampening system, Technotrans cooling and recirculation system, Anicolor inking system, water-cooled chiller, all washers, Autoplate system, low-pile delivery. Dkedpfsztap Nox Adror

Condition: good (used), Pot diameter: 600 mm Vibration: adjustable Dsdpfx Aeh Rfffsdrskr

Condition: good (used), Semi-automatic cold circular sawing machine with roller table. Dkodpsq U N Ryjfx Adrsr