Used Magraf Pk-50X40 Plus for sale (6,640)

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist Laodpfxozzhfuo Alysh * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: used, mileage: 3,79,435 km, power: 294 kW (399.73 HP), first registration: 05/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2027, color: blue, gearing type: mechanical, emission class: euro4, total length: 8,400 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, crane, MAN TGA 28.400 Roofing Crane PK 40001 6x4-4 Hydrodrive Suspension: Leaf-air Wheelbase: 3.60 m Payload: 4180 kg Palfinger Roofing Crane Type: PK 40001 ELC 4x Hydraulic extensions Lodpjzqwr Asfx Alyjah 4x Hydraulic outriggers 1x Remote control 1x Winch Equipment: - Engine brake - Digital tachograph - Multi-function steering wheel - Liftable and steerable axle - Cooler box - Electric windows - Radio/CD - Sun visor - Air ABS, power connection We would be happy to assist you with financing/leasing through our partners. All information without guarantee. Errors and prior sale excepted.

Condition: used, mileage: 42,586 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,280 mm, first registration: 04/2024, fuel tank capacity: 70 l, CO₂ emissions: 195 g/km, emission class: euro6, color: white, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, sliding door, traction control, = Additional options and accessories = - Sliding door, right side - Android Auto - Apple CarPlay - Driver alertness assistant - Automatic low beam headlights - Outside temperature gauge - Heated exterior mirrors - Passenger airbag - Bluetooth - Electric windows, front - Electrically foldable exterior mirrors - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Hill-hold control - Wooden cargo area - Height-adjustable driver's seat - Height-adjustable steering wheel - Lumbar support - Front center armrest - Multimedia compatible - Fog lights - Emergency brake assist - Radio - Radio with DAB - Radio with DAB+ (WLZ1) - Rain sensor - Start/stop system - Immobilizer - Thermally insulated glass - Blind spot monitoring - Partition Laodpfjzr N Ixox Alyoh = Additional information = General information Number of doors: 5 Model range: March 2019 - Aug. 2022 Cab: single Technical information Torque: 400 Nm Number of cylinders: 4 Engine displacement: 1,997 cc Transmission: 8 gears, automatic Acceleration (0–100): 10.9 s Top speed: 170 km/h Dimensions Length/Height: L3H1 Dimensions (L x W x H): 531 x 192 x 195 cm Weights Unladen weight: 1,696 kg Payload: 1,404 kg GVW: 3,100 kg Max. towing capacity: 2,500 kg (unbraked 750 kg) Interior Interior: black Maintenance, history, and condition APK (Technical Inspection): valid until 04.2027 Number of keys: 2 (2 remote controls) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: new, functionality: fully functional, empty load weight: 683 kg, maximum load weight: 2,017 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,535 mm, loading space width: 2,150 mm, tire size: 195 / 50 R 13C, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Unideck Plus 450/2 S 2.7T NEW VEHICLE Internal dimensions: 453cm x 215cm Total weight: 2700kg Payload: 2017kg Braked 2-axle trailer Ledpjzvb N Njfx Alyjah Overrun brake and parking brake from KNOTT or AL-KO 2x 1350kg axles and brake with automatic reverse function Suitable for transporting longer vehicles Low chassis Bolted, hot-dip galvanized steel frame Steel ramps in the rail channel Numerous tie-down points along the entire length Reinforced 13" C tires with steel valve M+S tires 13-pole plug Side marker lights Rear lights with reversing light and triangular reflectors Winch with brake and bracket 2x wheel chocks OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with bracket -Complete LED lighting -Anti-theft device -Replacement of steel rail with aluminum rail -Wheel stops -Folding crank-operated rear supports -Anti-sway coupling Further accessories available upon request! Plus shipping to Gera and vehicle registration document €250 net Images are examples and may show accessories that are subject to an additional charge. Have you not yet found the right trailer? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, including for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. We also offer a wide selection of rental trailers. Visit us online or come by directly!

Condition: excellent (used), mileage: 5,22,907 km, power: 268 kW (364.38 HP), first registration: 11/2000, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: air, number of seats: 3, Year of construction: 2000, Equipment: ABS, crane, = Additional options and accessories = - 3 chairs - Beacon(s) - Lift Axle - PTO - Radio/CD player - Steering Axle - Toolbox = Remarks = Crane Number of hydraulic extensions: 3 Number of support legs: 2 Remote control: ✓ Load Hook: ✓ Meter capacity: 10,60 m Capacity kilo: 6560 kg = More information = Number of doors: 2 Cab: single Front axle: Steering Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Lift axle; Steering; Suspension: air suspension GVW: 28.000 kg Crane: PALFINGER, year of manufacture 2000, behind the cab Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Laedpfx Aljznd Dgoyeh Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, functionality: fully functional, mileage: 2,76,300 km, first registration: 06/2023, fuel type: diesel, empty load weight: 8,041 kg, overall weight: 18,000 kg, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 935 l, brakes: VEB, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 1, total length: 5,890 mm, total width: 2,518 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 12,000 kg, Year of construction: 2023, Equipment: ABS, AdBlue, Bluetooth, additional headlights, air conditioning, central locking, differential lock, electric window regulation, fog lights, fridge, navigation system, onboard computer, parking air conditioner, parking heater, second fuel tank, spoiler, VOLVO FH13.500 Globetrotter I-Save Semi-trailer tractor unit 4x2 Leaf spring suspension at the front - air suspension at the rear Differential lock Automatic transmission VEB-Plus GVWR 18,000 kg - Unladen weight 8,041 kg - Permissible total train weight 44,000 kg Overall truck length 5.89 m Wheelbase 3.70 m Sleeper cab with 1 berth Tires 40% tread ABS Euro 6 530L + 405L fuel tanks Spoiler Full fairing Sun visor Round lights Bluetooth Fog lights Central locking Air-suspended driver's seat Auxiliary air conditioning Auxiliary heater Air conditioning Navigation system Refrigerator Electric windows and exterior mirrors Radio All information is subject to change without notice / errors and omissions excepted. Laedpfxeznk D Hs Alyeh

Condition: good (used), Year of construction: 2005, Console table with vacuum suction plate New control system installed in 2022 (price: €9,000) Control program: Xilog Plus X-axis between stops: 2500 mm Y-axis with milling: 1240 mm Y-axis with drilling: 1080 mm Z-axis: 200 mm (max. workpiece height: 100 mm) Main spindle HSK 63 with 6.5 kW, up to 24,000 rpm 4 tool changers at the front 4 tool changers at the rear Drilling unit Laodpfx Aszhgz Ijlysh External dimensions: 5.8 x 2.8 m

Condition: excellent (used), mileage: 2,58,207 km, power: 160 kW (217.54 HP), first registration: 04/2003, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, loading space length: 2,040 mm, loading space width: 2,260 mm, loading space height: 400 mm, Year of construction: 2003, Equipment: crane, Crane Crane length: 7.2 m Lajdpszl Hv Hjfx Alyjh Number of hydraulic extensions: 2 Number of support legs: 2 Remote control: ✓ Meter capacity: 7 m Capacity kilo: 3200 kg = More information = Cab: single Empty weight: 7.679 kg Carrying capacity: 4.311 kg GVW: 11.990 kg Crane: PALFINGER PK6001, year of manufacture 2003, on rear of chassis Tipper: Right Technical condition: very good Visual appearance: very good Registration number: YPU934 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping Laodpfxjy Nd Hye Alyoh • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: used, Year of construction: 2019, operating hours: 5,532 h, Equipment: ABS, all wheel drive, soot filter, Finished SD2500WS PLUS T4F* weather protection canopy * Air conditioning * Seat heating * Auxiliary heater * Leveling system/cross-slope control * Automatic centralized lubrication system for paver and/or screed * Infinitely variable hydrostatic drive * Front axle is a tandem swing axle * Diesel engine Cummins QSB 6.7 - EUIV(T4f) * All-wheel drive (2 x rear wheels + 4 x front wheels) * Pave Manager 2.0 Advanced Laedpfx Aloy T Ukdsysh * PLC electrical system (CAN bus), ECO mode, 24 V electrical system * Wheel track stone deflector * Mixing material hopper with individual control * Hydraulic front hopper * Support rollers with shock absorption * Reversible slat conveyor with double bars and individual control of conveyor belt halves * Automatic shutdown via mechanical paddles * Hydraulic screw conveyor with height scale * Two reversible screw halves (380 mm) * Ultrasonic sensors in the screw conveyor * Hydraulic screed locking * Side-mounted operator station with weather protection canopy * Variable control panel with push buttons and 7" multifunction display * Two heated Grammer comfort seats * Four LED headlights (2 x front + 2 x rear) * Dynalink Advanced - Telematics system * Hydraulic system for Pave Manager Adv. * SD2500WS THERMO with LightAssist (Paver) ----Vario screed V 5100 TV PM+* Vario screed with gas heating * Basic width 2.55 m, hydraulically extendable to 5.1 m * Compaction system: tamper and vibration * Bottom plate Hardox 500 * Hydraulic adjustment of roof profiles * Two external controls incl. leveling electronics * Leveling system Mobamatic 2+1 * FRONT WHEEL DRIVE CAN BE ACTIVATED FOR WORK ----Additional equipment and accessories* Screw 380 mm 4.42 m * Connection kit V5100/6000 * Rotating beacon * Fire extinguisher * First aid kit * Smoke extraction system * RESTRICTED SD2500WS THERMO * Hydraulic system for Pave Manager Adv. * LightAssist (Paver) * Lighting for screw conveyor * LED headlights screed left + right * 12V socket * TEMPERATURE MEASUREMENT SCREW CONVEYOR * Spray system 25L with hose * High-performance front-wheel drive * Tool set * SetAssist (Transport position) * TRUCKASSIST ADVANCED * Thermomaterial hopper * Folding material guide * Weather protection house * Hydraulic oil drain hose * STVZO - Lift axle * Infrared temperature measurement preparation * Operating manual + parts list (USB) * Operating manual * Parts list * Set of drawings A3 * Leveling system Mobamatic 2+1 * Vario screed V 5100 TV PM+ * Side guards OBT approved (G) PM * Spirit level screed * Holder for cross-slope Moba * Holder for height sensor MobaGrade 1x * Screed width measurement * LightAssist (Screed) * DYNAPLUS12 ----Vehicle number 12111 Errors and prior sale excepted.

Condition: used, mileage: 7,61,000 km, power: 324 kW (440.52 HP), first registration: 10/2009, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, Year of construction: 2009, Equipment: ABS, air conditioning, crane, parking heater, MAN TGX 18.440 TRAKTORUNIT + CRANE + REMOTE CONTROL / 4x2 Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 761 000 km EQUIPMENT: ? ABS ? ASR ? POWER STEERING ? EL WINDOWS ? EL MIRRORS ? ENGINE BRAKE ? TACHOGRAPH ? AIRCONDITION TOTAL WEIGHT: 18 000 kg WHEELBASE: 420 cm TIRE SIZE: FRONT : 385/65R22,5 BACK : 315/80R22,5 SUSPENSION: FRONT : SPRING BACK : AIR CRANE: PALFINGER PK 29002 + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 9538 Ljdpfjy Sq Hxex Alyjah

Condition: used, mileage: 23 km, power: 130 kW (176.75 HP), first registration: 05/2026, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,640 mm, next inspection (TÜV): 05/2028, color: grey, driver cabin: other, emission class: euro6, number of seats: 7, loading space volume: 7.9 m³, loading space length: 2,320 mm, loading space width: 1,760 mm, loading space height: 1,930 mm, construction height: 2,590 mm, working width: 2,040 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, Tow hitch up to 3.5 tons (optional), navigation via smartphone possible, warranty 5 years or 250,000 km from initial registration (according to the manufacturer's warranty conditions). Body style: High roof in vehicle color, Climatic air conditioning, central locking, exterior mirrors electrically adjustable and heated, power windows front, Multifunction display Plus, Digital Cockpit Pro (digital instrument display), hill start assist, lane keeping assist, emergency braking assistant (Front Assist) including pedestrian and cyclist detection, traffic sign recognition, distraction and fatigue detection, speed control system (cruise control), Intelligent Speed Assist including speed limiter, multifunction steering wheel, parking assistance front and rear, reversing camera, partition, spare wheel with road tires, summer tires, heated windshield, light and rain sensor, LED headlights, LED daytime running lights, digital radio reception (DAB+), infotainment with touchscreen color display 26 cm (10.4 inches), Bluetooth hands-free system with wireless charging function, audio system Composition (radio - touchscreen color display - USB interface), W-Lan / Wifi hotspot, mobile online services App-Connect Wired and Wireless, emergency call system, tire pressure monitoring system, heat-insulating glazing, storage package 2, tachometer, driver airbag, airbag driver/passenger side - passenger airbag can be deactivated, anti-lock braking system (ABS), electronic stability program (ESP), air suspension seat, comfort seats, center armrest, driver comfort ErgoActive suspension seat (20-way seat adjustment - massage function) with armrest and lumbar support, rear headrests, light assistant (Coming Home - Leaving Home), start/stop system, diesel particulate filter, service history available, sliding door loading/passenger compartment right, immobilizer (electronic), headlight range control, exterior temperature display, power steering electro-mechanical, preparation for trailer coupling (socket and cable), tinted windows, paint: Ascot Grey, wooden floor with interior paneling, mud flaps rear, passenger double seat with storage/stowage compartment and backrest that can be folded down to form a stowage table, chassis: dampers and stabilizers reinforced - front and rear, front bumper in grey with trim in vehicle color, trailer stabilization program, mobile phone interface, multimedia interface 2 USB-C (center console) with increased charging power - 2 USB-C charging ports (center - front), truck registration, non-smoker package, storage: 2 DIN compartment in front under the headliner, interior lights in the driver's cab: front reading light, permissible gross weight 3.50 t, underbody paneling with CW value, radiator grille with chrome strip on top, exterior mirror convex - left, exterior mirror convex - right, LED turn signals integrated into exterior mirror, automatic headlight activation, windshield wipers with intermittent operation - adjustable, floor covering in the driver's cab: rubber, entry handle on the rear pillar left, entry handle on the rear pillar right, grab handles A-pillars, remote control key (2) foldable, seat belt warning system (driver/passenger side), interior lights in the driver's cab: LED, interior lights in the loading/passenger compartment: LED, glove compartment with flap, preparation for alcohol interlock (Alcolock), dual-tone horn, sockets (12V connection) in the driver's cab (2 pieces), lashing eyes in the cargo area, brake assi Ljdpozizbfsfx Alyoah

Condition: excellent (used), mileage: 4,17,800 km, power: 390 kW (530.25 HP), first registration: 09/2017, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, emission class: euro6, loading space length: 6,350 mm, Year of construction: 2017, operating hours: 1 h, Equipment: Apple CarPlay, cruise control, electric window regulation, fog lights, parking heater, retarder, trailer coupling, = Additional options and accessories = - Air horn - Coupling - Intarder - PTO - Radio/Cd/Audio system - Refrigerator - Rotating beacon - Sunroof - Vehicle heater - Visor = Remarks = Mercedes-Benz Arocs 3253 8x4 Palfinger PK 50002 EH F + JIB PJ 080 C DPS PLUS Last axle lift and steering axle Retarder 471,800 KM Loading bed length: 635 cm Various stainless steel toolboxes Various work lights Beacons Palfinger PK 50002 EH F + JIB PJ 080 C DPS PLUS 4378 Crane hours Vehicle is in very good condition = More information = Transmission: Automaat Front axle: Steering Rear axle 1: Lift axle; Steering Empty weight: 21.250 kg Laodpfx Alezk Hbmjysh Carrying capacity: 14.250 kg GVW: 35.500 kg Technical condition: very good Visual appearance: very good

Condition: used, Siemens Connection Box PN Plus 6AV6671-5AE11-0AX0 Connection box for SIMATIC HMI panels with a PROFINET interface. Suitable for industrial operator control and visualization systems in production and automation plants. Manufacturer: Siemens Product designation: Connection Box PN Plus Article number: 6AV6671-5AE11-0AX0 Communication: PROFINET Lodpozdahhofx Alyjah PROFINET ports: 2 Status indicators: Link and Activity for Port 1, Port 2, and the panel Supply voltage: 24 V DC Current consumption: max. 1.0 A Ambient temperature: 0 °C to +50 °C Country of manufacture: Germany Condition: used Location: Kusel 6 units available

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,497 h, construction height: 3,270 mm, power: 209 kW (284.16 HP), empty load weight: 9,450 kg, total length: 5,274 mm, construction width: 2,620 mm, Tractor Speed category: 50 Technical condition: good Laedpfx Alsy U A H Noysh Battery condition: good

Condition: used, Year of construction: 2016, operating hours: 704 h, machine/vehicle number: 3886, overall weight: 4,900 kg, working height: 12,000 mm, enginetype: Electric, manufacturer: JLG Ljdpfx Aszcbkholysah

Condition: used, mileage: 43,230 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,750 mm, first registration: 07/2024, fuel tank capacity: 80 l, CO₂ emissions: 250 g/km, emission class: euro6, color: white, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking sensors, sliding door, = Additional Options and Accessories = - Front and rear parking sensors - Sliding door on the right side - Automatic headlights - Heated exterior mirrors - Passenger airbag - Bluetooth - Electric front windows - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Rear doors - Height-adjustable driver's seat - Height-adjustable steering wheel - Collision mitigation by braking - Leather steering wheel - Lumbar support - Multifunctional steering wheel - Fog lights - Radio - Radio with DAB - Rain sensor - Start/Stop system - Immobilizer - Connected services - Windshield heating - Partition = Additional Information = General Information Number of doors: 5 Model range: May 2019 - July 2023 Cab: single Technical Information Torque: 360 Nm Number of cylinders: 4 Engine displacement: 1,995 cc Ledpfx Aljzp Npqoyjah Transmission: 6 gears, automatic Top speed: 157 km/h Dimensions Length/Height: L3H2 Dimensions (L x W x H): 598 x 206 x 255 cm Weights Unladen weight: 2,118 kg Payload: 1,382 kg GVWR: 3,500 kg Max. towing capacity: 1,700 kg (unbraked 750 kg) Interior Interior: black Consumption Average fuel consumption: 8.9 l/100km Maintenance, History and Condition APK (Technical Inspection): valid until 07.2027 Number of keys: 2 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, mileage: 60,436 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,750 mm, first registration: 07/2024, fuel tank capacity: 80 l, CO₂ emissions: 250 g/km, emission class: euro6, color: white, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking sensors, sliding door, = Additional options and accessories = - Front and rear parking sensors - Sliding door on the right side - Automatic headlight control - Heated exterior mirrors - Passenger airbag - Bluetooth - Electric front windows - Electrically adjustable exterior mirrors Lajdpfjzt Sklsx Alyeh - Euro 6 - Driver airbag - Remote central locking - Rear doors - Height-adjustable driver's seat - Height-adjustable steering wheel - Collision mitigation by braking - Collision warning system - Leather steering wheel - Lumbar support - Multifunctional steering wheel - Fog lights - Radio - Radio with DAB - Rain sensor - Lane keeping assist - Start/Stop system - Immobilizer - Connected services - Windshield heating - Partition = Additional information = General information Number of doors: 5 Model range: May 2019 - July 2023 Cab: standard Technical information Torque: 360 Nm Number of cylinders: 4 Engine displacement: 1,995 cc Transmission: 6 gears, automatic Top speed: 157 km/h Dimensions Length/Height: L3H2 Dimensions (L x W x H): 598 x 206 x 255 cm Weights Unladen weight: 2,118 kg Payload: 1,382 kg GVWR: 3,500 kg Max. towing capacity: 1,700 kg (unbraked 750 kg) Interior Interior: black Consumption Average fuel consumption: 8.9 l/100km Maintenance, history and condition APK (Technical Inspection): valid until 07/2027 Number of keys: 2 (2 remote controls) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, mileage: 2,01,600 km, power: 265 kW (360.30 HP), first registration: 02/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, color: white, gearing type: automatic, emission class: euro6, total length: 10,400 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 7,100 mm, loading space width: 2,490 mm, loading space height: 850 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, tail-lift, * Special equipment: platform body by Schwarzmüller * Crane by PALFINGER, type PK 18002 EH * Remote control * 4 hydraulic outriggers * Tail lift by PALFINGER, 1.5t, 2m aluminum platform * Front axle load 8.0 t, * Audio-navigation system with Bluetooth, * Exhaust pipe pointing downwards to the right, * Battery 220 Ah, * Compressed air connection in the cab, * Air horn, * Electrical pre-wiring in the cab 24V / 100 A, * Cab: steel-sprung, comfort, * Gearbox lock for auxiliary drive, * Reinforced engine brake, * High Performance Engine Brake * Auxiliary drive MB 124-10c, * PSM special module, * Tail lift switch, * Circuit breaker, * Driver's seat: comfort suspension seat, * Exterior sun visor, * Steel rims 11.75x22.5 (on front axle), Lajdezt D Amspfx Alysh * Tires 385/65R22.5 10/10 mm * Rear axle tires 315/80R22.5 10/10 and 10/10 mm * Tag axle tires 315/80R22.5 10/9 mm * Additional 24V socket in the passenger footwell, * Preparation for rear view camera, * Oil cooler for transmission * Emission standard EURO 6C * Axle configuration: 6x2, * Trailer brake 2 - line, connections on the left, * Trailer socket 24V / 15-pin, * Trailer hitch with 40 mm pin * Trailer load 30100 kg with continuous braking system, with central axle trailer 14600 kg * Antos series * Exterior mirrors, electrically adjustable and heated, * Differential lock rear axle, * Cab: width 2.30 m, * Cab: hydraulic tilting mechanism, * Cab: M ClassicSpace, * Cab version: ClassicSpace, * Exterior storage compartment on the left, * Cab floor with engine tunnel 320 mm, * Cab: roof height 420 mm, * Suspension: air / air (full air suspension), * Electric windows, * Tinted windshield, * Generator 100 A, * Gearbox 12-speed - type: G 211-12, * Power Shift gearbox * (AdBlue): 60 Ltr., * Manual lift roof (steel), * Comfort locking system, * Fuel tank: 290 Ltr. aluminum, * Lifting mechanism on tag axle, * Air intake from the front, * Engine 10.7 Ltr. - 265 kW R6 Diesel (OM 470), * Disc brakes front and rear * Co-driver's functional seat, * Splash guard front, * Stabilizer front axle, * Additional stabilizer, rear axle / tag axle, * 24V socket in the cab, * Tachograph / EU control device, * Underride protection aerodynamically shaped, * Front underrun protection, * Preparation for toll collection, * Permissible total weight 26.00 t * Errors, prior sales and changes subject to confirmation

Condition: used, mileage: 68,868 km, power: 75 kW (101.97 HP), first registration: 03/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,790 mm, fuel: diesel, CO₂ emissions: 153 g/km, fuel tank capacity: 53 l, color: grey, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, Year of construction: 2024, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, onboard computer, power mirror, sliding door, start-stop system, tire pressure monitoring, traction control, = Additional Options and Accessories = - Metallic paint - Parking assist - Sliding door on the right side - Driver alertness system - Automatic headlight control - Heated exterior mirrors - Electric front windows - Electrically foldable exterior mirrors - Electronic brake-force distribution - Euro 6 - Driver airbag - Remote central locking - Speed limiter - Height-adjustable driver's seat - Height-adjustable steering wheel - Collision mitigation by braking - Leather steering wheel - Multifunctional steering wheel - Multimedia-compatible - Fog lights - Radio - Radio with DAB Laodpfx Aeztq Uielyoh - Rain sensor - Rearview camera - Voice control - Immobilizer - Connected services - WiFi hotspot - Partition = Additional Information = General Information Number of doors: 5 Model range: March 2024 - 2026 Cabin: single Technical Information Torque: 250 Nm Number of cylinders: 4 Engine displacement: 1,499 cc Acceleration (0-100): 16.6 s Top speed: 164 km/h Dimensions Length/Height: L1H1 Weights Unladen weight: 1,363 kg Payload: 1,007 kg GVW: 2,370 kg Interior Interior: black Consumption Average fuel consumption: 5.3 l/100km Maintenance, History and Condition Number of owners: 3 APK (Technical Inspection): valid until 03/2027 Number of keys: 1 (1 remote control) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Lsdpfxezxqd Io Alyoah Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 600 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of axes: 4, This 4-axis Matsuura H. Plus 405 was manufactured in 2006. It features an X-axis travel of 600 mm, Y-axis travel of 660 mm, and Z-axis travel of 660 mm, along with a 360° rotary B-axis. The machine has a maximum workpiece size of 700 × 850 mm and a tool changer capacity of 60 tools. If you are looking to get high-quality machining capabilities, consider the Matsuura H. Plus 405 horizontal machining centre we have for sale. Contact us for further details. • B-Axis: 360° rotary table • Rapid Traverse X/Y/Z: Up to 60 m/min • Pallet Size: 500 × 500 mm • Maximum Workpiece Size: 700 × 850 mm • Maximum Workpiece Weight: 400 kg • Pallet Changer: 2-position • Main Spindle Speed: Max. 12,000 rpm • Tool Holder Options: SK40 / BT40 / HSK63 • Max Spindle Drive Power: 15 / 22 kW • Maximum Spindle Torque: 187 Nm • Tool Changer Capacity: 60 tools • Chip-to-Chip Time: Approx. 3.5 sec. Ledpfxozwp S Us Alyjah Technical Specification Taper Size SK 40

Condition: used, mileage: 4,73,829 km, power: 350 kW (475.87 HP), first registration: 07/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2027, color: white, gearing type: automatic, emission class: euro6, loading space volume: 16 m³, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, parking heater, * Sun visor * ABS * ASR * Radio * On-board computer * Auxiliary heater * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating * Central locking * Fog lights * Driver comfort seat * Seat heating * Longitudinal and transverse locks * Air dryer * Trailer coupling * 2-line air connection * Duomatik air connection * Active Brake Assist * Roll stability control * Attention assist * Tire pressure monitoring system * Lane keeping assist * Air horns * Sunroof * ESP * Reversing warning * Cornering lights * Xenon headlights * 12-speed Laedszwahtepfx Alyeh * Suspension: Air * Payload: 10925 * Continuous brake: High Performance Engine Brake ----Special body: Crane: Palfinger PK 23001 L TEC3, maximum lifting capacity 5.35t, elevated operator station, pilot control, 3-way hydraulic extension, fully hydraulic outriggers, oil cooler, engine start/stop, 6th + 7th control circuit for rotary servo and grapple operation. Measured load diagram: Lifts at 6m-3.55t, 8.5m-2.4t, 11m-1.78t, 13.5m-1.42t.----Body: Construction materials tipper, front panel raised, hardwood floor, lashing eyes, 2-part side walls with damper relief, foldable center beam, Kinnegrip locks.----Axle load measuring system, Fuel Performance Pack 1, Powertrain Pack 1 Sale only to commercial customers. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT + ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales negotiations are our general terms and conditions (see the legal notice for details).

Condition: used, mileage: 2,99,806 km, power: 103 kW (140.04 HP), first registration: 02/2018, fuel type: diesel, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2017, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, VW Crafter 2.0 TDI, medium wheelbase, with 5 seats, featuring: air conditioning, navigation, auxiliary heater with remote control, electric windows, tilting window in the second row of seats. - Special features: Second battery with battery monitoring; driver and passenger airbags; passenger airbag can be deactivated; Discover Media audio navigation system (touchscreen color display); electrically adjustable and heated exterior mirrors; driver assistance systems: front and rear parking sensors; chassis: reinforced suspension and shocks; sliding windows in cargo/passenger compartment: front left and right; vehicle without cargo partition; Climatic air conditioning (driver’s cab) with second evaporator; side marker lights; smoker's package; spare wheel in matching tire configuration including on-board tools and jack; rear door hinges with increased opening angle; comfort seats for driver and front passenger; auxiliary heater with remote control; 4 x 12V power sockets in the cab; rear entry step integrated in bumper; half-height plastic cladding in the cargo/passenger compartment. Additional equipment: Laodpfezgz Efjx Alyeh Convex exterior mirrors left and right; LED indicators integrated into exterior mirrors; rubber floor covering in cab; aerodynamic underbody paneling; dual headlights; twin-tone horn; grab handle on rear left and right roof pillars; hill start assist; brake assist system (HBA); crosswind assist; front electric window lifters; laminated safety glass windscreen; grab handles on A-pillars; rear wing doors without windows; LED interior lights in cab and cargo/passenger compartment; body type: standard panel van; roof type: standard roof; 75-litre fuel tank; front radiator grille with upper chrome trim; steering column (steering wheel) adjustable; headlight beam adjustment; N1 homologation (commercial vehicle registration); engine: 2.0 L - 103 kW TDI; rear fog light; wheelbase: 3640 mm; tire repair kit; low-emission as per Euro 6 emissions standard; right-side sliding door in cargo/passenger compartment; SCR system (AdBlue technology); electro-mechanical power steering; seat upholstery: fabric; 6.5x16 steel wheels; start/stop system; front bumper in grey with colour-coded trim; lashing points in cargo area; driver's seatbelt warning system; heat-insulating glazing; central locking with remote and interior actuation; permissible gross vehicle weight: 3.5 t. - Financing available via our partner banks. We are happy to assist you. Please note: subject to prior sale as this item is also offered on other platforms. Accessory specifications provided without guarantee. Changes, prior sale, or errors excepted. We offer and strongly recommend a viewing and inspection to ensure buyers have an accurate understanding of condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Year of construction: 2015, operating hours: 2,677 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, number of axes: 3, This 3-axis punch press for profiles PARS HMP SIRIUS PLUS -3000/3-L1 was manufactured in 2015. It features a maximum section dimension of 110 x 110 mm and can handle wall thicknesses up to 8 mm. The machine offers a punching speed of 1 hole/s and is capable of punching 2 sections simultaneously with its 2-row design. If you are looking to get high-quality punching capabilities, consider the PARS HMP SIRIUS PLUS -3000/3-L1 punch press for profiles we have for sale. Contact us for further details. • Punching speed: 1 hole/s (including shift to next position) • Max. section dimensions: 110 x 110 mm • Wall thickness: up to 8 mm • Shear cylinder force: 17 t / 30 t • Section length: 3 m Lajdjzhv Ttepfx Alysh • Number of punching axes: 1–6 (holes in X–Y–Z system) • Number of punching rows: 1–2 (2-row machine punches 2 sections simultaneously) • Main axis drive: linear motor or rotary servo motor • Expanding adapter for internal section support (deformation-free punching) • Automatic mechanical centering of the section at the shear point • Micro-lubrication only at the shear point