Used Maier Mlk32 Hybrid for sale (388)

Condition: used, Trumpf TRUMPF TruDisk 4002 (4 C) High-Performance Solid-State Disk Laser with up to 4 kW Output Type: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with demanding requirements for quality, precision, and automation. The combination of high power, excellent beam quality, and smart factory features makes it particularly attractive for modern production lines. System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3* No additional tests were carried out in-house. Operating hours could not be read out. The laser operated flawlessly until decommissioning. Technical features: Output & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optional with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design also suitable for highly reflective metals Industry 4.0 capable: extensive sensor technology and data interfaces for condition monitoring, OPC UA, predictive maintenance Application areas: Scanner & hybrid welding (e.g. automotive body manufacturing, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface processing Laser cladding, hardening, deep penetration welding where high precision is required Technical data: Supply voltage: 380 V (-10%) to 460 V (+10%), 3AC + PE Iiodpfezii Nqex Aqwsd Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Protection rating: IP 54 Short-circuit strength: Icn / SCCR 50 kA Weight: 850 kg Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Condition: used, Trumpf TRUMPF TruDisk 6602 (4C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering approximately 6.6 kW of continuous power output – perfectly suited for welding, cutting, and surface treatment processes for metals such as steel, aluminum, copper, etc. System type: TruDisk 6602 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5 No further in-house inspection has been performed. Operating hours could not be read out. The laser was operating flawlessly until decommissioning. Iijdpfezii D Ijx Aqwsd Key Technical Features: • Power: Continuously adjustable from 80 W up to 6,600 W, max. 6.6 kW for machine tool applications • Beam quality: < 2 mm·mrad for excellent focus handling • Wavelength: 1030 nm (infrared), adaptable to green wavelength for specific models • Output options: Up to 4 laser outputs (4C) for simultaneous supply of multiple process cells • Cooling system: Integrated heat exchanger (up to 28°C inlet temperature), optional compressor cooling (up to 38°C) • Modular and service-friendly: Compact footprint (< 1 m²), modular components for fast maintenance and service Benefits & Applications • Maximum process stability: Real-time power regulation ensures reproducible results • Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum • Industry 4.0 ready: Sensor-integrated monitoring system, OPC-UA interface for condition monitoring & predictive maintenance • Energy efficiency: Up to 50% reduction in power consumption thanks to intelligent pulse control and energy-saving modes • Versatility: Application range includes welding (including BrightLine for nearly spatter-free seams), cutting, hardening, casting processing, additive manufacturing, laser wire deposition welding, and more Suitable Use Cases: Ideally suited for industrial high-power laser applications: Application | Features ---|--- Automotive structural part manufacturing | Deep penetration welding with high reproducibility Copper welding | Particularly suitable with green wavelength (> 95% spatter reduction) Remote hybrid welding | Fast processing of large surfaces with robust beam Additive manufacturing & hardening | Enabled by excellent beam quality and compact design Main Technical Data Property | Specification ---|--- Laser power | Up to 6,600 W (6.6 kW), continuous Beam quality | < 2 mm·mrad Wavelength | 1030 nm (infrared) Number of outputs (4C) | Up to 4 simultaneously usable fiber outputs Fiber connector diameter | 100–600 µm (depending on configuration) Beam delivery | Fiber-based, passive (no deflection mirrors required) Cooling | Water/air-cooled, internal or external chiller Dimensions | Approx. 1000 × 800 × 2100 mm (W×D×H, variant-dependent) Weight | ~800–1200 kg (excluding cooling) Power supply | 380 V - 10% ... 460 V +10%, 3-phase AC + PE, 38 kW / 41 kVA, 59 A / 400 V, 50–60 Hz Control | TruControl 1000/3000, OPC-UA interface Safety standards | Laser safety class 4 according to EN 60825-1 Weight: approx. 1200 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data. Information may be subject to alteration!) We are happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 2019, Manufacturer: INK SYSTEMS Model: Soft Sonic IS Compact 1300 Hybrid Machine Type: Hybrid Ultrasonic Anilox Roller Cleaning System Year: 2018 Maximum Working Length: approx. 1,300 mm Condition: Good used condition FGT Condition Rating: 8/10 Availability: Subject to prior sale Why this machine is of interest Clean anilox rollers are essential for stable ink transfer, consistent color density, and reproducible flexographic print quality. The IS Compact 1300 Hybrid is designed for professional and efficient cleaning of anilox rollers. Its hybrid cleaning concept offers an attractive solution for label and packaging printers seeking to remove dried ink residues and contamination from engraved anilox cells while reducing manual cleaning effort. For a flexographic printing company, this can directly support: more consistent ink transfer, improved print quality, recovery of effective anilox cell volume, reduced manual cleaning time, longer service life of valuable anilox rollers. Main Technical Data & Configuration Professional anilox roller cleaning system Hybrid cleaning technology Ultrasonic cleaning principle Suitable for anilox rollers up to approx. 1,300 mm Iisdpezmhbgsfx Aqwed Controlled cleaning process Designed for professional industrial use Suitable for regular maintenance cleaning Compact machine design Closed cleaning concept Year of manufacture: 2018 Suitable Applications Ideal for: Label printing companies Narrow- and mid-web flexographic printers Flexible packaging production Folding carton applications Industrial flexographic printing Regular maintenance of anilox rollers

Condition: used, mileage: 90,000 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, first registration: 10/2022, next inspection (TÜV): 10/2027, emission class: euro6, color: white, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Optional extras: Driving Assistant system, vehicle without model lettering, metallic paint, tire repair kit (Mobility Pack), heated front seats, sun protection glass (tinted rear) Ijdpfx Ajxqi Eboqwjid Additional equipment: Storage package, deactivatable passenger side airbag, driver/passenger side airbag, Connected Professional equipment package, exterior equipment: Shadow Line high-gloss, electric exterior mirrors. adjustable and heated, exterior mirrors in body color, BMW Live Cockpit Plus, on-board computer, brake assist, DAB tuner (digital radio reception), high-gloss Shadow Line roof rails, anti-theft protection for wheels (rim locks), through-loading facility (rear center armrest), dynamic brake light, Dynamic Stability Control (DSC) with extended scope, Dynamic Traction Control (DTC), first aid kit / first aid kit, driving assistance system: Active Guard Plus (lane keeping assistant, front collision warning), driving assistance system: attention assistant, driving assistance system: driving experience switch, remote tailgate release, velour floor mats, front footwell lighting, luggage compartment partition (net), luggage compartment lighting, automatic tailgate operation, LED rear lights, interior: interior trim strips in matt grained quartz silver, body: 5-door, 3-zone automatic climate control with automatic. Air recirculation control, rear head airbag system, front head airbag system, folding rear headrests, multifunction steering wheel (sport/leather), alloy wheels, 140 kW mild hybrid (2.0 liter engine - 140 kW diesel), facelift, front and rear Park Distance Control (PDC), electric parking brake, tire pressure monitoring system, low emissions according to Euro 6d emissions standard, LED headlights, rear side airbag, front side airbag, seat cover/upholstery: Hevelius fabric, mirror package, start/stop system (function), warning triangle, widescreen display, tinted heat-insulating glass August 9, 2024 73,049 km* Rear brake pads * Standard service * Oil filter * Other brakes * Rear brake discs * Oil change * Microfilter * Fuel filter New price ¤ 51,008 net

Condition: new, Year of construction: 2026, CORMAK C2141 ATC PREMIUM CNC Router (2100 × 4200 mm) 1. Worktable Sectioned vacuum worktable with four independent vacuum zones, manufactured from rigid and durable HPL panels. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces of various sizes. The worktable surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. 2. HQD Spindle High-performance 9 kW brushless HQD spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system, ensuring reliable operation and low maintenance. Isdpfx Aqevupu Ueweid 3. Drive System Energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, delivering excellent machining quality while maintaining high feed rates. Brushless servo motors drive the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for maximum durability and long-term reliability. Professional HIWIN linear guide rails are installed on all axes and undergo strict quality inspection. A centralized automatic lubrication system continuously lubricates the linear bearing blocks and ball screw, minimizing maintenance requirements and extending component life. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining, resulting in improved machining accuracy and superior surface finish. 5. 8-Position Automatic Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump & Dust Extraction Hood (Optional) Four independent vacuum zones for efficient workpiece clamping. 7. Industrial Control System & Software Equipped with the NK-105 G3 CNC control system. Compatible with the latest CAD/CAM software solutions. Optional UCanCAM V13 software available in Polish/English versions. Technical Specifications Working Area 2100 × 4200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump Optional 2 × 7.5 kW vacuum pump Software Optional UCanCAM V13 (Polish/English version) Machine Dimensions 5070 × 2870 × 1900 mm Machine Weight 3350 kg

Condition: new, Year of construction: 2026, CORMAK IND 2131 CNC Router (2100 × 3100 mm) Machine Description 1. Worktable Sectioned vacuum worktable with six independent vacuum zones, manufactured from rigid and durable HPL panels, individually controlled directly from the electrical control cabinet. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Main vacuum openings are equipped with sealing plugs, allowing efficient clamping of workpieces in various sizes. The table surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. Integrated T-slots allow manual workpiece clamping when required. The table is equipped with pneumatic positioning stops on two axes, enabling fast and repeatable positioning of workpieces in exactly the same location. 2. Spindle High-performance 9 kW brushless spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system, ensuring reliable operation and low maintenance. 3. Drive System High-efficiency YASKAWA AC servo drives, controlled by a digital CNC controller, delivering outstanding machining quality while maintaining high feed rates in all axes. Brushless YASKAWA AC servo motors drive the X and Y axes via precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives manufactured from hardened and heat-treated steel, ensuring long-term reliability and accuracy. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining, resulting in superior surface finish and machining precision. 5. Automatic Tool Changer & Tool Length Sensor Equipped with a 12-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 2 pcs 3–4 mm – 2 pcs 5–6 mm – 4 pcs 7–8 mm – 2 pcs 9–10 mm – 2 pcs Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Industrial CNC Control System The machine is controlled by an industrial SYNTEC CNC controller, commonly used in professional machining centres. Supplied with a handheld control pendant and LCD display. Optional UCanCAM V13 CAD/CAM software available in Polish and English language versions. Technical Specifications Isdpfx Aevup Unsqwsid Parameter Value Working Area 2100 × 3100 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System 1500 W Hybrid AC LEADSHINE servo motors Table Type Hybrid vacuum table Spindle Power 9 kW Gearbox Shimpo Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump Optional 7.5 kW vacuum pump with 8 independent vacuum zones Software Optional UCanCAM V13 (Polish/English version)

Condition: new, Year of construction: 2026, Machine Description 1. Worktable Sectioned vacuum worktable with FOUR independent vacuum zones, manufactured from rigid and durable HPL panels. Each zone features vacuum ports connected via a piping system to the vacuum pump. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces in various sizes. T-slots are also provided for manual workpiece clamping when required. 2. HQD Spindle High-quality 9 kW brushless HQD spindle, powered by an inverter with built-in overload protection. High-speed electro-spindle equipped with an innovative air-cooling system. Designed for automatic tool changing (ATC), significantly reducing machining time by eliminating manual tool changes. 3. Drive System High-performance, energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, ensuring excellent machining quality at high feed rates. Brushless servo motors driving the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. X and Y axis movement is transmitted through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for long-term reliability. All axes are equipped with professional HIWIN linear guide rails, which undergo strict quality inspections and testing throughout the manufacturing and assembly process. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining operations, resulting in improved surface finish and machining accuracy. 5. 8-Position Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC), supplied with ISO30 tool holders and ER32 collets. Included collets: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump (Optional) & Dust Extraction Hood Four independent vacuum zones for efficient workpiece holding. Pneumatically operated dust extraction hood mounted around the spindle, allowing connection to virtually any dust extraction system while maintaining a clean working environment, improving operator safety, and preserving machining accuracy. Technical Specifications Parameter Value Working Area 2100 × 3200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump 2 × 7.5 kW (optional) Ijdpfx Ajvupcroqweid Software UCanCAM V13 (Polish language version, optional) Machine Dimensions 4070 × 2870 × 1900 mm Machine Weight 2050 kg

Condition: used, Controller, Ecograph, Alpha-Log, Data Recorder, Recorder, Color Hybrid Recorder -Endress Hauser: Alpha-Log color hybrid recorder with accessories -Recorder: Type RSA10-31B1T -Isolation amplifier: RN 221 -Modbus: RS 485 Iiodpfx Aei Huvwsqwjd -Thermometer: TST 10 -Pressure transmitter: PMC 133 -Individual components: see photos -Price/handover: complete -Transport dimension: 500/500/H200 mm -Weight: 11 kg

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x2 with F990RA.2.28 L616 V30 - New model – electrohydraulically steered tag axle, single tires - FH sleeper cab - Wheelbase 5600 mm - Exhaust emissions per Euro 6 Step E - Includes SCR, particulate filter, and EGR - Diesel engine 12.8 L, 510 HP / 375 kW, 2,550 Nm - Volvo Engine Brake+ (VEB+) engine brake - Braking power 510 HP / 375 kW (D13K) - Complies with ADR braking regulations - I-Shift AT2612F, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Diesel – Driver Comfort Package - Air conditioning with automatic climate control and sun sensor - Info and media package with navigation - Radio reception: AM/FM - 3x USB ports Iiedpszl Irpofx Aqwjd - 8 speakers - High instruments: digital driver info display, 12 with 4 layouts - Second driver info display, 9" display - TOMTO navigation system - AGM batteries, 2 x 210 Ah - Battery status displayed (voltage, current, and battery status with warning function) - Main switch on chassis - 330 L aluminum tank right, D-shape, 710 mm high, 830 mm long - Fuel tank, standard ground clearance - AdBlue tank left, usable capacity 64 liters - Lockable fuel cap - Spill protection for tank filler neck - Rearward exhaust outlet - 2 foldable wheel chocks, mounted for transport - Marker lights, rear and side - Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern - Trailer cross member to frame end 85 mm - Rear frame length 4,395 mm, measured from drive axle/first drive axle - Rockinger 400 G-150 trailer coupling (observe D-value/max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pin - Semi-trailer/trailer connector Duomatic - Trailer connections in center - Stationary trailer brake (active up to 7 km/h) - Rear underrun protection, aluminum, fixed, slim - 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle - 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, tag axle - Electric venting pump - Transmission/I-Shift controls via control panel at driver’s seat - I-Shift driving modes: Standard, Performance, and Economy - Auto return to Economy mode - No manual interventions in automatic mode, no kickdown - Cruise control - Transmission oil cooler, basic, water/oil - 2-cylinder air compressor, 1,100 l/min, for vehicles/combinations with increased air requirements - Front air intake with standard air filter - Alternator 150A/4200W - External noise per ECE R51.03 Phase 2, with low-noise certificate and L-plate - Closed crankcase ventilation - Double fuel filter on engine, large size for poor fuel quality, e.g., in Eastern Europe - Fuel filter with water separator - PTO (medium speed PTR-DM), gearbox-side, 1 DIN rear output for pump - PTO on transmission, max. output 600 Nm - Dynamic equipment: Seats in fabric, yl (blue/dark blue) with grey fabric interior - Driver’s comfort seat, air-suspended, heated, seatbelt integrated - Standard passenger seat, air-suspended - Lower bunk, foldable, 2000x815/740/660 mm (middle, top, bottom) with safety net - Cab parking heater, 2 kW - Storage under bunk - Refrigerator with freezer compartment, 33 L, under bunk - Vanity/shaving mirror - Reinforced cab insulation

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Volvo FH 500 8x2 with F990RA.2.28 L616 V30 - New model – electrohydraulically steered tag axle, single tires - FH sleeper cab - Wheelbase 5600 mm - Exhaust emissions per Euro 6 Step E - Includes SCR, particulate filter, and EGR - Diesel engine 12.8 L, 510 HP / 375 kW, 2,550 Nm - Volvo Engine Brake+ (VEB+) engine brake - Braking power 510 HP / 375 kW (D13K) - Complies with ADR braking regulations - I-Shift AT2612F, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Diesel – Driver Comfort Package - Air conditioning with automatic climate control and sun sensor - Info and media package with navigation - Radio reception: AM/FM - 3x USB ports - 8 speakers - High instruments: digital driver info display, 12 with 4 layouts - Second driver info display, 9" display - TOMTO navigation system - AGM batteries, 2 x 210 Ah - Battery status displayed (voltage, current, and battery status with warning function) - Main switch on chassis - 330 L aluminum tank right, D-shape, 710 mm high, 830 mm long - Fuel tank, standard ground clearance - AdBlue tank left, usable capacity 64 liters - Lockable fuel cap - Spill protection for tank filler neck - Rearward exhaust outlet - 2 foldable wheel chocks, mounted for transport - Marker lights, rear and side - Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern - Trailer cross member to frame end 85 mm - Rear frame length 4,395 mm, measured from drive axle/first drive axle - Rockinger 400 G-150 trailer coupling (observe D-value/max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pin - Semi-trailer/trailer connector Duomatic - Trailer connections in center - Stationary trailer brake (active up to 7 km/h) - Rear underrun protection, aluminum, fixed, slim - 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle - 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, tag axle - Electric venting pump - Transmission/I-Shift controls via control panel at driver’s seat - I-Shift driving modes: Standard, Performance, and Economy - Auto return to Economy mode - No manual interventions in automatic mode, no kickdown - Cruise control - Transmission oil cooler, basic, water/oil - 2-cylinder air compressor, 1,100 l/min, for vehicles/combinations with increased air requirements - Front air intake with standard air filter - Alternator 150A/4200W - External noise per ECE R51.03 Phase 2, with low-noise certificate and L-plate - Closed crankcase ventilation Isdpfx Aezllxmjqweid - Double fuel filter on engine, large size for poor fuel quality, e.g., in Eastern Europe - Fuel filter with water separator - PTO (medium speed PTR-DM), gearbox-side, 1 DIN rear output for pump - PTO on transmission, max. output 600 Nm - Dynamic equipment: Seats in fabric, yl (blue/dark blue) with grey fabric interior - Driver’s comfort seat, air-suspended, heated, seatbelt integrated - Standard passenger seat, air-suspended - Lower bunk, foldable, 2000x815/740/660 mm (middle, top, bottom) with safety net - Cab parking heater, 2 kW - Storage under bunk - Refrigerator with freezer compartment, 33 L, under bunk - Vanity/shaving mirror - Reinforced cab insulation

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x2 with F990RA.2.28 L616 V30 - New model – electrohydraulically steered tag axle, single tires - FH sleeper cab - Wheelbase 5600 mm - Exhaust emissions per Euro 6 Step E - Includes SCR, particulate filter, and EGR - Diesel engine 12.8 L, 510 HP / 375 kW, 2,550 Nm - Volvo Engine Brake+ (VEB+) engine brake - Braking power 510 HP / 375 kW (D13K) - Complies with ADR braking regulations - I-Shift AT2612F, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Diesel – Driver Comfort Package - Air conditioning with automatic climate control and sun sensor - Info and media package with navigation - Radio reception: AM/FM - 3x USB ports - 8 speakers - High instruments: digital driver info display, 12 with 4 layouts - Second driver info display, 9" display - TOMTO navigation system - AGM batteries, 2 x 210 Ah - Battery status displayed (voltage, current, and battery status with warning function) - Main switch on chassis - 330 L aluminum tank right, D-shape, 710 mm high, 830 mm long - Fuel tank, standard ground clearance Iiedeywfxyjpfx Aqwsd - AdBlue tank left, usable capacity 64 liters - Lockable fuel cap - Spill protection for tank filler neck - Rearward exhaust outlet - 2 foldable wheel chocks, mounted for transport - Marker lights, rear and side - Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern - Trailer cross member to frame end 85 mm - Rear frame length 4,395 mm, measured from drive axle/first drive axle - Rockinger 400 G-150 trailer coupling (observe D-value/max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pin - Semi-trailer/trailer connector Duomatic - Trailer connections in center - Stationary trailer brake (active up to 7 km/h) - Rear underrun protection, aluminum, fixed, slim - 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle - 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, tag axle - Electric venting pump - Transmission/I-Shift controls via control panel at driver’s seat - I-Shift driving modes: Standard, Performance, and Economy - Auto return to Economy mode - No manual interventions in automatic mode, no kickdown - Cruise control - Transmission oil cooler, basic, water/oil - 2-cylinder air compressor, 1,100 l/min, for vehicles/combinations with increased air requirements - Front air intake with standard air filter - Alternator 150A/4200W - External noise per ECE R51.03 Phase 2, with low-noise certificate and L-plate - Closed crankcase ventilation - Double fuel filter on engine, large size for poor fuel quality, e.g., in Eastern Europe - Fuel filter with water separator - PTO (medium speed PTR-DM), gearbox-side, 1 DIN rear output for pump - PTO on transmission, max. output 600 Nm - Dynamic equipment: Seats in fabric, yl (blue/dark blue) with grey fabric interior - Driver’s comfort seat, air-suspended, heated, seatbelt integrated - Standard passenger seat, air-suspended - Lower bunk, foldable, 2000x815/740/660 mm (middle, top, bottom) with safety net - Cab parking heater, 2 kW - Storage under bunk - Refrigerator with freezer compartment, 33 L, under bunk - Vanity/shaving mirror - Reinforced cab insulation

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Volvo FH 500 8x2 with F990RA.2.28 L616 V30 - New model – electrohydraulically steered tag axle, single tires - FH sleeper cab - Wheelbase 5600 mm - Exhaust emissions per Euro 6 Step E - Includes SCR, particulate filter, and EGR - Diesel engine 12.8 L, 510 HP / 375 kW, 2,550 Nm - Volvo Engine Brake+ (VEB+) engine brake - Braking power 510 HP / 375 kW (D13K) Iedpfx Aqjyy Tuuowoid - Complies with ADR braking regulations - I-Shift AT2612F, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm - Liftable axle - Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t - AA tires 315/70R22.5 - Drive axle ratio 2.85 : 1 - Diesel – Driver Comfort Package - Air conditioning with automatic climate control and sun sensor - Info and media package with navigation - Radio reception: AM/FM - 3x USB ports - 8 speakers - High instruments: digital driver info display, 12 with 4 layouts - Second driver info display, 9" display - TOMTO navigation system - AGM batteries, 2 x 210 Ah - Battery status displayed (voltage, current, and battery status with warning function) - Main switch on chassis - 330 L aluminum tank right, D-shape, 710 mm high, 830 mm long - Fuel tank, standard ground clearance - AdBlue tank left, usable capacity 64 liters - Lockable fuel cap - Spill protection for tank filler neck - Rearward exhaust outlet - 2 foldable wheel chocks, mounted for transport - Marker lights, rear and side - Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern - Trailer cross member to frame end 85 mm - Rear frame length 4,395 mm, measured from drive axle/first drive axle - Rockinger 400 G-150 trailer coupling (observe D-value/max. trailer load!) - Electrical connection for semi-trailer/trailer, 15-pin - Semi-trailer/trailer connector Duomatic - Trailer connections in center - Stationary trailer brake (active up to 7 km/h) - Rear underrun protection, aluminum, fixed, slim - 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle - 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle - 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, tag axle - Electric venting pump - Transmission/I-Shift controls via control panel at driver’s seat - I-Shift driving modes: Standard, Performance, and Economy - Auto return to Economy mode - No manual interventions in automatic mode, no kickdown - Cruise control - Transmission oil cooler, basic, water/oil - 2-cylinder air compressor, 1,100 l/min, for vehicles/combinations with increased air requirements - Front air intake with standard air filter - Alternator 150A/4200W - External noise per ECE R51.03 Phase 2, with low-noise certificate and L-plate - Closed crankcase ventilation - Double fuel filter on engine, large size for poor fuel quality, e.g., in Eastern Europe - Fuel filter with water separator - PTO (medium speed PTR-DM), gearbox-side, 1 DIN rear output for pump - PTO on transmission, max. output 600 Nm - Dynamic equipment: Seats in fabric, yl (blue/dark blue) with grey fabric interior - Driver’s comfort seat, air-suspended, heated, seatbelt integrated - Standard passenger seat, air-suspended - Lower bunk, foldable, 2000x815/740/660 mm (middle, top, bottom) with safety net - Cab parking heater, 2 kW - Storage under bunk - Refrigerator with freezer compartment, 33 L, under bunk - Vanity/shaving mirror - Reinforced cab insulation

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 13E273E, For sale: National Instruments PXI-6221 Multifunction DAQ Module, in fully working condition. Manufacturer: National Instruments (NI) Model: PXI-6221 Iiodpfxjzh Irzj Aqwod Condition: Used – Fully Tested and Working Tested with: NI MAX – functionality verified Analog Inputs: 16 AI (16-Bit, 250 kS/s) Analog Outputs: 2 AO Digital I/O: 24 DIO Counters: Two 32-bit counter/timers Connector: 68-pin VHDCI Interface: PXI / PXI Express hybrid-slot compatible Driver: NI-DAQmx compatible Tested with NI MAX software and confirmed to be fully functional. All analog and digital channels have been tested and verified. Compatible with LabVIEW, LabWindows/CVI, and Measurement Studio. Ideal for laboratory automation, research, and production testing. Removed from a working industrial environment, no known issues. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection.

Condition: used, functionality: fully functional, machine/vehicle number: E4F8F4, For sale: National Instruments PXI-6238 Bank-Isolated Multifunction DAQ Module, in fully working condition. Manufacturer: National Instruments (NI) Model: PXI-6238 Condition: Used – Fully Tested and Working Tested: NI MAX – operational functionality verified Analog inputs: 16 AI (16-bit, 1.25 MS/s), ±20 mA Analog outputs: 2 AO Digital inputs: 6 DI Digital outputs: 4 DO Counters: Two 32-bit counter/timers Isolation: Bank-isolated Interface: PXI / PXI Express hybrid-slot compatible Iijdpfjzh Ip Hjx Aqwod Tested with NI MAX software and confirmed to be fully functional. Ideal for reading encoders, flow meters, and proximity sensors, as well as controlling valves, pumps, and relays in high-voltage and electrically noisy industrial environments. Removed from a working industrial environment; no faults found. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection.

Condition: used, Year of construction: 2020, machine/vehicle number: WUAZZZF22LN901519, Equipment: - 22-inch Vossen "Hybrid Forged" alloy wheels - Maxton Design rear spoiler - Maxton Design rear diffuser - Front lip - Side skirts - Steering wheel with display and lights above (shift indicator) - Ceramic brakes - Lowering (yellow springs, possibly KW) - BTM Turbo intake - Head-up display - Electrically adjustable seats - Automatic tailgate Defects (see pictures): - Battery defective (needs to be jump-started) - Front lip partially incomplete in the middle - Engine check light - Crack in the intake in the middle, on the "BTM Turbo" lettering - Paint chipping on the rear right wheel arch Ijdozlz Nhjpfx Aqwsid - Gap on the front bumper, left side - Material breakout on the rear diffuser above the exhaust, likely due to heat - Pressure loss in the rear left tire Information: - Next oil change in 7,000 km / 11.2026 - Next inspection in 6,500 km / 02.2027 - Last air conditioning service on 07.01.2024 at 44,851 km - Last oil change on 03.24.2025 at 57,258 km Special notes: - Performance upgrade in 2021 to approximately 900 hp (it cannot be ruled out that the performance upgrade is still active) - Car was registered in Belgium - Exhaust is not original and very loud - No entries or ABE (German general type approval) for the tuning parts

Condition: used, Year of construction: 2001, Technical details: turning diameter over bed: 410 mm turning dia. over face-slide: 200 mm turning length: 950 mm bed width: 330 mm turning diameter over support: 410 mm face slide travel: 630 mm centre height: 200 mm control: Siemens/Weiler D2 milling spindle dia. in forward position: 90 mm spindle bore: 54 mm range of revolution per miute: 1 - 3000 U/min feed speed: 0 - 20 mm/U rapid travel - longitudinal/face: 10/5 m/min tailstock taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm Iiodezd Sg Iopfx Aqwjd weight of the machine ca.: 2,1 t dimension machine xH: 2,3 x 1,4 x 1,7 m The E35 is neither a purely manual machine nor a classic CNC, but a hybrid: Work like on a conventional lathe Automatic cycles at the push of a button No complex programming required Extremely fast for single parts & small batch production Also suitable for operators without CNC knowledge Weiler describes it as follows: Simple parts like conventional machining Complex parts like CNC, but easier *

Condition: excellent (used), Year of construction: 2023, Biesse Akron 1330 A Edgebander Single-sided edgebander AKRON 1330-A Gluing Unit SP03 End trimming Unit IT03 Fine trimming Unit RF02 Corner rounding Unit AR02 PRE-MILLING UNIT RT02 Symmetrical diamond tools H=45 mm Z=2+2 30° included. Iisdpfx Asyyb Icsqwed EDGE SCRAPER RB02 Tools are not included. GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 SUPPLEMENTARY LATERAL PANEL SUPPORT KIT FOR THE INSTALLATION OF THE PANEL RETURN SYSTEM MANUAL INFEED SYSTEM FOR NARROW PIECES KIT FOR PROCESSING "SHADOW LINE" PROFILE PANELS STRAIGHT AIR TABLE AT THE MACHINE INFEED ANTIADHESIVE UNIT ADZ02 PAIR DIAMOND-COATED MILLING CUTTERS H=65 mm Z=2+2 30°.In replacement of standard tools. HYBRID GLUING CHUCK FOR GRANULATED EVA/PUR GLUE INSTEAD OF THE STANDARD SYSTEM TM15 HYBRID PREMELTER FOR EVA/PUR GLUE ADAPTIVE INFRA RED LAMP AdIRL-700 AX-4, NC AXIS ON FINE TRIMMING UNIT PRO-NESTING KIT FOR FINE TRIMMING UNIT Pair of multiprofile milling cutters for fine trimming unit: chamfering 25 degrees, R=2 mm + R=1 mm, straight profile for solid wood AX-2, NC AXIS ON CORNER ROUNDING UNIT ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT Pair of milling cutters, R=2 mm, for corner rounding unit Pair of milling cutters, R = 1 mm, for corner rounding unit AX-4, NC AXIS ON EDGE SCRAPER PRO-NESTING KIT FOR EDGE SCRAPER UNIT Pair of knives R=2 mm, for edge scraper Pair of knives R=1 mm, for edge scraper CLEANING UNIT LPT02 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, mileage: 51,000 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, first registration: 08/2023, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special equipment: Vehicle without model lettering, lumbar support for front left seat, electrically adjustable, heated steering wheel, metallic paint, parking assistant package, driver assistance system: parking assistant, driver assistance system: parking aid (side), driver assistance system: rear view assistant, driver assistance system: rear view assistance with emergency braking function (Active PDC), tire repair kit (Mobility Pack), front seat heating, tinted glass (darkened at the rear) * 12V socket in the luggage/cargo compartment (front) * 2 height-adjustable active headrests (front), 3 height-adjustable headrests (rear) * 4 disc brakes (4 internally ventilated) * 8-speed automatic transmission with manual gear selection and gearshift paddles on the steering wheel, automatic with manual mode * Foldable exterior mirrors * Audio remote control on the steering wheel * Electrically adjustable, heated, and body-colored exterior mirrors with automatic dimming function on the driver's side, with direction indicator on the passenger side * Illuminated entry area * Ventilation system with digital monitoring, pollen filter, activated carbon filter, and engine preheating * Brake assist * Collision warning system activates brake lights, drowsiness detection, automatic emergency braking, brakes at low speed (minimum speed for activation: 5 km/h), pedestrian protection, visual/audible warning, function above 130 km/h (78 mph), function above 50 km/h * Black roof rails * Front and rear parking sensors * Electric tailgate closing assistance * Electric drive with lithium-ion battery, range: 0.00, battery voltage: 48.0, battery Ah: 11.0, battery kWh: 0.50, range (miles): 0.00, included kW: 0, number of contract months included: 0 and 0.46 * Electronic stability program * Electronic parking brake * Energy recovery from the engine * Driver airbag (intelligent), passenger airbag with deactivation for passenger airbag (intelligent) * Driver settings for engine characteristics, steering, stability control, and traction control * Driver and passenger seats, individual seats with mechanical backrest tilt adjustment, mechanical longitudinal adjustment, and mechanical height adjustment Iiodpszknrajfx Aqwjd * Remote-controlled tailgate remote release * Remote control for air conditioning via the Internet, via the telephone, with timer, with heating, and with cooling * Five seats with seat configuration: 2+3 * Floor mats * Powertrain warranty - OEM duration (months) 36 and total mileage (km) unlimited * Battery warranty duration in months: 36, total mileage: 9,999,999 * Electric drive warranty duration (months) 36, total mileage (km) 9,999,999, and total mileage (miles) unlimited * Overall vehicle warranty - OEM duration (months) 36 and total mileage (km) unlimited * Luggage securing system * Luggage securing net * Speed limiter * Speed control system (cruise control) * Cup holders for front and rear seats * Separate ventilation control for the passenger side and rear with digital display * Headlights with automatic dusk sensor (automatic) * Rear-wheel drive * Rear window with hinged window and windshield wiper with intermittent function * Hybrid type: Mild-Hybrid * Installed apps * Internal storage/hard drive 320.00 GB * Isofix * Air conditioning with 3 climate zones (fully automatic) * Reconfigurable instrument cluster * Fuel: Diesel * Fuel system with common rail * Flexible luggage compartment cover * LED headlights with ellipsoid diffuser, LED * LED lights for brake light

Condition: used, mileage: 1,69,000 km, power: 143 kW (194.43 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2022, next inspection (TÜV): 01/2028, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, soot filter, Special equipment: Equipment package: Business, preparation for car sharing, high-end infotainment package, connectivity package, smartphone integration, instrument cluster with variable display (widescreen cockpit), service system: MBUX augmented reality for navigation, inductive charging cradle for smartphone, parking package, driving assistance system: active parking assist, front seat heating, fuel tank: enlarged, driving assistance package, parking package, driving assistance system: active parking assist, PRE-SAFE system, head-up display (front view display), comfort package acoustics, charging cable for public charging stations, lumbar support for front seats, electrically adjustable, panoramic sliding sunroof, electric (fully glazed roof area), heated windshield washer system, seat comfort package, seat upholstery / padding: leather-look Artico, mirror package, exterior mirrors electrically foldable, exterior / interior mirror with automatic anti-glare function, 230V socket, Burmester surround sound system Special equipment* 18" light alloy wheels in 5-twin-spoke design, painted black and polished with VA 245/45 R 18 on 8 J x 18 ET 34, HA 275/40 R 18 on 9 J x 18 ET 52.5 * 230-V socket in the rear * Active Distance Assist DISTRONIC * Active Steering Assist * Active Parking Assist with PARKTRONIC * Active Lane Keeping Assist * Acoustic Comfort Package * Trailer coupling with ESP trailer stabilization, electrically swiveling * Burmester® surround sound system * Business package Iisdpfszknq Nex Aqwsd * Driving assistance package * Head-up Display * Wireless charging system for mobile devices * Connectivity package navigation * Fuel tank with larger volume 66 l (60 l for diesel plug-in hybrid) * MBUX High-End Package * Lower price component (DM4) * Panoramic sliding sunroof * Parking package with reversing camera * Upholstery leather-look ARTICO * Heated windshield washer system * Front seat heating * Seat comfort package * Smartphone integration consisting of Apple CarPlay and Android Auto * Mirror package * Traffic Sign Assist * Preparation for digital key handover * Widescreen cockpit (currently not available as part of the MBUX High-End Package and Business Package. Expected to be available from the 1st quarter of 2022) Other equipment: Storage package, adaptive brake lights, airbag on passenger side can be deactivated, airbag driver / passenger side, acoustic environmental protection (exterior sound), AC charging system (AC), exterior mirrors in vehicle color, pelvic airbag in front (pelvis bag), glasses compartment integrated in the headliner, DAB tuner (digital radio reception), roof rails (aluminum), design and equipment line Avantgarde, electric motor 90 kW (hybrid drive), driving assistance system: Agility Select / Dynamic Select (driving mode switch), driving assistance system: traffic information system Live Traffic, electric windows front + rear, floor mats velours, luggage / load compartment cover incl. safety net, rear lights LED, hybrid 225 kW (engine 2.0 Ltr. - 143 kW diesel), infotainment system: Mercedes me connect, infotainment system: Remote & Charging Services Plus, infotainment system: Remote Service (Plus), interior: decorative trim effect paint silver, interior lighting package, Isofix mounts for child seat in the rear, body: 5-door, automatic climate control (Thermatic 2-zone), knee airbag on driver side, comfort chassis (Agility Control), head airbag system front, charging cable with Schuko plug, steering wheel with multifuncti

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,100 h, Manufacturer TRUMPF Type TruMatic 1000 - 1600 Fiber (K07) Year 2018 X-axis travel 3000 mm Laser nominal power 3000 Watts Control system Bosch CML 45 Punching force 16.5 to Max. sheet thickness 6.4 mm Max. material weight 150 kg Iisdpjzgfnqefx Aqwsd Standard configuration Machine ⦁ Box frame ⦁ Hybrid axis system ⦁ Linear magazine with 20 stations for clamps and tools ⦁ Hydraulic clamps (3x) ⦁ Drives with maintenance-free AC motors ⦁ Follow-up device with programmable pressure foot ⦁ Foot switch for closing the clamps ⦁ Part separator chute, right ⦁ Part removal flap, left ⦁ Sensor for part removal flap ⦁ Work area lighting ⦁ FocusLine ⦁ SortMaster Compact (retrofit option) TRUMPF Laser ⦁ LLK according to standard layout (10m) ⦁ Laser power control ⦁ Laser log function ⦁ Enclosed beam guidance via laser light cable (LLK) ⦁ Separate power supply for the TruDisk Compact cutting unit ⦁ Solid-state laser compact cutting system ⦁ Protective glass ⦁ Collision protection ⦁ ControlLine Punching head ⦁ Delta drive ⦁ Rotatable single-station tool adapter ⦁ Programmable pressure foot position ⦁ Tool length compensation ⦁ Punch spray lubrication ⦁ Punch slug vacuum ⦁ Forming function ⦁ Punching stroke counter Control system ⦁ TRUMPF control system based on Rexroth IndraMotion MTX ⦁ Touch panel with TFT 19" color screen ⦁ Integrated technology data ⦁ Programmable cutting gas pressure ⦁ Interface for remote maintenance ⦁ Automatic shutdown with wake-up function ⦁ Program manager ⦁ Production plan Options: Copper cutting package Brass cutting package Compressed air cutting Outfeed of small parts Brush tables Multitool Sensor for part separator chute Sign function, quick beading Multibend Thread forming Deburring roll technology Sorting function for part separator chute Height-adjustable clamps

Condition: new, Year of construction: 2026, Router CNC2030 ATC 4 axes, tilting spindle +/- 90 degrees working area 2100 x 3000 [mm] The ATC series of plotters was created for professional use in large industrial plants and factories. These machines are designed to process a wide range of materials. In order to meet the demands of heavier machining, the ATC machines feature an additionally reinforced construction and more powerful AC servo drives on each axis. A vacuum work table is standard on these machines. It is also possible to install a hybrid table. Plotters in this series are equipped as standard with automatic tool changing, a six-position linear magazine and a tool height sensor. The solutions used significantly speed up the machining process requiring the use of several cutters. Materials to be machined: wood wood-based materials (chipboard, MDF, OSB, etc.) plastics Isdpsirfavofx Aqweid composites PVC non-ferrous metals (aluminium, brass, copper, etc.) CONSTRUCTION: The structure of the machine tool is made of steel and cast iron which gives it high rigidity, as well as resistance to the overloads associated with the machining process. WORKING SURFACE: The usable area of our machine tool is 2100 x 3000 [mm]. MATERIAL CLAMPING: The machine is equipped with a vacuum table. It is possible to install a hybrid or T-table. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 300 [mm] as standard (can be increased). DRIVES: SERVO motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes are driven using classic and proven helical rollers to ensure long service life and precision, while the Z axis is driven using a high-performance ball screw. All axes move on rail guides.... SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. The power supply is provided by an inverter, which has more power than the spindle, which protects against speed drops when operating under heavy load. TOOL STORAGE: The machine tool comes standard with a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine has been supplied with the appropriate CAD/CAM software in its latest version. The software makes it possible to design parts quickly and easily, which the programme then converts into so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is controlled by a controller, which has its own processor and operating memory to ensure stable and reliable operation. The machine controller is equipped with active vector analysis functions, so that operation of the machine is smooth and there is little overshoot during processing. The controller has a recovery function to continue operation after a power loss, so there is no need to initialise the programme from scratch. The controller's on-board memory allows the machine to work without having to load the programme each time.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, pressing force: 150 t, stroke length: 315 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 3,100 mm, throat depth: 450 mm, clearance between the columns: 2,700 mm, oil tank capacity: 200 l, total length: 4,000 mm, total width: 1,910 mm, total height: 2,880 mm, controller manufacturer: JFY lub Dalem, controller model: TJS90 LCD 19', control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: CE marking, documentation/manual, safety light barrier, Condition: New Delivery time: In stock Pressing force: 150 tons Bending length: 3100 mm Axes: 6+1 (Y1, Y2, X, R, Z1, Z2 + deflection compensation) Stroke: 315 mm Distance between uprights: 2700 mm Throat depth: 450 mm Iedpezg Tuxefx Aqwoid Drive: Hydraulic / Hybrid Sheet support arms on a linear guide Front and rear laser safety system Equipment complies with CE regulations Operating manual available in POLISH, GERMAN, or ENGLISH Available for immediate dispatch from stock.

Condition: like new (used), Year of construction: 2023, operating hours: 506 h, functionality: fully functional, machine/vehicle number: G3790-0043, turning length: 705 mm, turning diameter over cross slide: 290 mm, turning diameter: 230 mm, spindle motor power: 20,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 5,000 rpm, feed length Z-axis: 700 mm, bar passage: 51 mm, Equipment: rotational speed infinitely variable, 1. CNC turning machine with a 12-position tool turret, capable of simultaneously controlling up to 8 spindles for 2 systems. 2. Enables single-setup machining. 3. Powerful, integrated spindle motor. 4. Robust BMT turret. 5. Multitasking capabilities can be achieved by adding a Y-axis to the upper turret (TTSY specifications). Iodpfx Aqezd D Nuswsid 6. Integrated machining through synchronized control of the main and counter-spindle. 7. Construction with hybrid guides: a combination of box guides (XY-axis) and linear guides (Z-axis).

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, axle configuration: 4x4, load capacity: 400 kg, mast type: other, lifting height: 18,450 mm, platform length: 2,400 mm, platform width: 900 mm, overall weight: 8,930 kg, fuel type: hybrid, color: red, Equipment: all wheel drive, Articulated telescopic work platform AIRO A18 JRTH 400 Plus with battery-powered hybrid system Technically in fully functional condition. Optically as shown. Iisdpfx Aqsyf Hfvewsd - All-wheel drive / all-wheel steering - Oscillating axle - Differential lock Year of manufacture 2022 Max. working height 18.45 m Max. height during travel 18.45 m Max. lateral reach 9.80 m Max. load capacity 400 kg Basket rotation +/- 90° Max. climbing ability 22° Transport dimensions L/W/H 7.08 (5.00) / 2.20 / 2.41 (2.80) m Drive: Battery-powered hybrid, 4x4 all-wheel drive Color: red Special features: Large work basket 2.40 x 0.90 m, supercharger, bright off-road tires UVV inspection performed upon purchase, new! Available from stock in Langenhagen All information regarding the offered machine is without guarantee. Typographical errors / errors / prior sale reserved.

Condition: used, mileage: 51,500 km, power: 220 kW (299.12 HP), fuel type: hybrid, gearing type: automatic, first registration: 11/2022, next inspection (TÜV): 11/2027, emission class: euro6, color: blue, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Special Equipment: Business Package, e-tron Compact Charging System, Driver Assistance System: Passenger Protection System (Audi pre sense Rear), Comfort Auxiliary Air Conditioning, Adjustable Headrests, Alloy Wheels 8x18 (5-spoke, for winter tires), Metallic Paint, Rearview Camera Iijdpfxjyihd So Aqwsd Additional Equipment: Deactivatable passenger airbag, Front driver/passenger airbags, Acoustic pedestrian protection, Exterior sound (e-sound), Audi connect (internet-based services), Audi connect (emergency and assistance system), Audi Drive Select, Left and right aspherical exterior mirrors in body color, Matte black control elements, LED indicator lights integrated into exterior mirrors, Fabric headliner in silver, Entry sills with aluminum inserts, Electric motor 105 kW (hybrid drive), Driver assistance system: Brake Assist (Audi pre sense front), Driver assistance system: Passenger Protection System (Audi pre sense basic), Lane departure warning system, Driver information system (FIS) with color display, Rear seat bench (3 seats), Heat-insulating windshield, Electrically operated tailgate (open/close), Automatic tailgate opening, LED taillights, Hybrid, Hybrid 220 kW (2.0 L - 195 kW TFSI engine), Interior trim: Fine lacquer inlays, ISOFIX child seat mounts, 4-door body, Digital instrument cluster (virtual cockpit), 4-zone comfort automatic climate control, Head airbag system (sideguard), Fuel tank: 52 liters, Charging port (AC / DC), Charging cable with Schuko plug, Charging cable with Type 2 plug (Mode 3), Steering wheel (sports/leather - 3-spoke, flat-bottomed) with multifunction and shift paddles, Steering column (steering wheel) mechanically adjustable height/length, Alloy wheels, Multi-Media Interface MMI Basic Plus / MMI Radio Plus, Multi-Media Interface MMI Navigation Plus with MMI Touch, Non-smoker package, Otto particulate filter (OPF), Progressive steering, Digital radio reception (DAB), Tire repair kit, Tire pressure monitoring display, Split/folding rear seat backrest (40:20:40), Low-emission per Euro 6d emissions standard, Heated windshield washer nozzles, Luggage compartment rail system, Front side airbags, Manually adjustable front seats, Front sport seats, Standard suspension, Start/stop system, Bumper version: basic, Jack, Heat-insulating glazing (side/rear), Central locking / Keyless-Go start system