Used Malbate Mecaformat 270 for sale (2,718)

Condition: good (used), Truck crane Renault 270 DCI 19 tonnes Year : 2002 470.000 km Echange standard engine done at 250 000 km Crane capacity : 5,5 tonnes Technical check : OK Iijdperhzy Hsfx Acfjf Pas de télécommande de la grue

Condition: repair required (used), functionality: limited functionality, power: 49 kW (66.62 HP), first registration: 07/2011, fuel type: diesel, color: orange, fuel: diesel, Year of construction: 2011, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, Holder C 270 Drive System 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four equal-sized wheels Infinitely variable speed selection with a total of four pre-selectable gear stages Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater Heat-protective glazing and sliding side windows Multi-function display (tachometer, operating hour meter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multi-function arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional Equipment Mounting frame for tool-free changing of platforms and attachments Locking rail at the front for adjusting the top link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, speaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint color: Orange RAL 2004 Front linkage Front linkage incl. safety hook CAT IN / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm at the front Hydraulic flow divider 1 Flow divider, 1st circuit adjustable from 0–25 l/min with line set to the front and rear Return line at the front and rear Hydraulic kit, attachment adjustment pump Attachment adjustment pump 0–80 l/min, variable Line set to the front and rear Return line at the front and rear Leakage oil line at the front and rear Hydraulic tilting device for superstructure arms Iedozfbu Ropfx Acfjif Hydraulic set 2 3 double-acting control valves 2 with floating position 4 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 joystick incl. direction of travel switch and speed control Electro-hydraulic attachment relief Comfort package Driver's seat with air suspension, armrest 2 work lights at the front 2 work lights at the rear WITH THE FOLLOWING DAMAGES: - Articulated joint worn out - Age-related and usage-related wear on the vehicle - Rust damage corresponding to the age Changes, typing errors, mistakes and prior sale are subject to change. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Condition: used, mileage: 8,52,000 km, power: 228 kW (309.99 HP), first registration: 05/2006, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 9,150 mm, loading space width: 2,520 mm, Year of construction: 2006, Equipment: ABS, air conditioning, crane, SCANIA P 270 / 6x2 Platform 9,15 m Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2006 ? MILAGE: 852 000 km EQUIPMENT: Iiodpfx Acoy Uf T Sjfsf ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH Platform: 915 x 252 cm (L x W) CAPACITY: 14 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 510/135 cm TIRE SIZE: 295/60R22,5 SUSPENSION: FRONT: SPRING BACK: AIR TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 99996

Condition: used, Year of construction: 2010, machine/vehicle number: 00100060311, Item No. 26090 Technical data: - Design: vertical - Max. operating pressure: 10 bar - Pressure vessel capacity: 270 l - Suction volume: 585 l/min - Delivery rate: 440 l/min - Compressor speed: 1200 rpm Iiedpfx Acozd T S Eefef - Drive: 400 V / 4.0 kW - Boiler diameter, approx.: 600 mm - Space requirement, approx.: W 800 x H 1850 x D 900 mm - Weight, approx.: 150 kg

Condition: used, mileage: 1,84,691 km, power: 94 kW (127.80 HP), first registration: 01/2015, fuel type: diesel, overall weight: 2,932 kg, color: white, gearing type: mechanical, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Tel.: call (Contact · Phone · Mobile · WhatsApp) Special equipment: Passenger airbag, audio system: radio with CD and MP3 player including Bluetooth hands-free system, electrically adjustable, heated and foldable exterior mirrors, electronic parking aid, glazed tailgate, partition wall with window, spare wheel with road tires, sliding door on the left with window, side windows for the cargo/passenger compartment at the front (2nd row of seats) Additional features: Driver airbag, 70 Ah battery, body/structure: panel van, headlight range adjustment, alloy wheels, engine 2.0 L - 94 kW 16V JTDM CAT, wheelbase 3122 mm, tire repair kit, low-emission according to Euro 5 standard, right sliding door, visibility package, height-adjustable driver's seat * VIN: ZFA27000064352119 * First registration: 21.01.2015 * Vehicle without VAT * All information without guarantee Iiedpfjrx Nd Nsx Acfsf

Condition: good (used), Year of construction: 2005, functionality: fully functional, 400 l vessel, 3.8 kW, 10 bar, with condensate drain, used as a backup compressor, good condition Price ex location Transport possible at extra cost! Iodpfxsybbfio Acfoif Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: Robot: 915252 / Controller: 67104, overall weight: 1,501 kg, load capacity: 270 kg, arm reach: 2,700 mm, For sale is a used, tested KUKA industrial robot, type KR 270-2, equipped with a (V)KRC2 ed05 controller. The 6-axis robot was manufactured in 2009 (manipulator and controller) and is designed for heavy-duty industrial applications. With a payload capacity of 270 kg and a reach of 2700 mm, the system is suitable for areas such as handling heavy components, spot welding, and palletizing. Serial numbers are 915252 for the robot and 67104 for the controller. Operating hours are unknown. Ijdpfsy N Ehxex Acfoif

Condition: used, Year of construction: 2013, overall weight: 1,129 kg, load capacity: 270 kg, arm reach: 2,700 mm, controller model: KRC4, Equipment: documentation/manual, For sale is a KUKA KR 270 R2700 ultra industrial robot in good used condition. The robot comes from an industrial application and is fully functional. Before delivery, the robot will be thoroughly tested again to ensure perfect operation. This guarantees that you will receive an immediately ready-to-use and reliable solution for your automation tasks. An inspection while the robot is powered on can be arranged at any time. Scope of delivery: Iedpfjuvgq Sox Acfsif - Mechanics (manipulator) - Control cabinet / controller - Operating panel (teach pendant) - Connection cable

Condition: used, mileage: 1,77,000 km, power: 199 kW (270.56 HP), first registration: 07/2012, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 3,500 mm, loading space width: 2,300 mm, loading space height: 600 mm, Year of construction: 2012, Equipment: ABS, air conditioning, crane, Renault MIDLUM 270 DXI TIPPER 3,50 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2012 ? MILAGE: 177 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH TIPPER: 350 x 230 x 60 cm (L x W x H) CAPACITY: 9 000 kg TOTAL WEIGHT: 16 000 kg WHEELBASE: 330 cm TIRE SIZE: 11R22,5 SUSPENSION: SPRING Ijdpert E Tcofx Acfeif CRANE: PALFINGER PK 8501 - K + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: good (used), Year of construction: 2006, lifting height: 25,000 mm, fuel type: diesel, General information Mileage: 112.606 km Weights Empty weight: 7.420 kg Functional Lifting capacity: 350 kg Working height: 2.700 cm Working width: 248 cm Dimensions of cargo space: 800 x 248 x 350 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1980 m Max swing of platform in degrees: 540 Additional information Please contact Christian Theißen for more information Iisdpsy Rk U Tjfx Acfjf Manufacturer: Wumag Model: WT 270 Year of build: 2006 Condition: Used Data: Max. working height: 27,00 m Max. platform height: 25,00 m Max. reach: 19,80 m Total dimensions LxWxH: 8,00 x 2,48 x 3,50 m Platform dimensions LxW: 1,60 x 0,80 m Max. basket load: 350 kg Swivel range: +/- 540° Ground pressure: 24/20kN Ground clearance: 0,20 m Support width vertical: 2,48 m Support width one side: 3,69 m Support width both sides: 4,90 m Support length: 5,03 m Empty weight: 7.420 kg Special features: Rotating work basket Information: The vehicle is sold as standard WITHOUT roof protection. TÜV and UVV new. Location: 41468 Neuss immediately available

Condition: new, sheet thickness: 10bending length: 3100upper roll diameter: 270messurements (LxWxH): 5600 x 1450 x 1600prebending: 8motor: 11Bottom Roll Diameter: 250Side Roll: 210 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered Iijdpfx Acjd Ab R Ssfjf - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: DescriptionQtyNet Price (¤)Heating + Cooling11.477 ¤Variable Speed Rotation13.323 ¤Material Feeding Table 1000 × 2000 – 1 pcs12.414 ¤Central Support15.857 ¤Central Support Preparation1888 ¤Side Supports Left and Right15.020 ¤Side Support Preparation vs Standard1923 ¤Control System CNC-CS618.200 ¤Control System NC-CS617.721 ¤Ejector System113.020 ¤ We have many references!

Condition: ready for operation (used), Year of construction: 2018, clamping force: 400 kN, screw diameter: 30 mm, injection weight: 79 g, Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details. Ijdpfoy Nkwlsx Acfjif • Tie bar distance: 270 mm • Injection unit: size 100 (per EUROMAP) • Operating hours: 4,261 h (automatic) • Screw diameter options: 15 / 20 / 30 mm • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm • Vacuum pump capacity: approx. 25 m³/h • Pneumatic flow rate: 1,000 l/min per circuit • Heating capacity per control circuit: 3.6 kW / 230 V (16 A fuse) • Drive motor voltage: 380–480 V (50–60 Hz)

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 9349-0010, functionality: fully functional, Used: rotary hearth furnace / mandrel hardening press Manufacturer: Aichelin Model: Drehherdofen Aichelin RDGs 270 Control: Siemens S7-300/317-2 PN/DP Isdpfx Asw Rrxfecfoif Year of manufacture: 2012 Max. temperature: 950 °C GAS

Year of construction: 2026, condition: used, New display machine! Stationary piston compressor with refrigerant dryer, condensate drain, oil-water separator and pre-/fine filter. The universal solution with belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to two-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimum cooling via large fan wheel, motor with overload protection, easy condensate drainage using the standard-mounted 1/2" ball valve, standard equipped with Condor pressure switch and manometer, mounted as standard on a safety pallet with anti-vibration mounts. Technical data: Suction capacity 650 l/min, output capacity 520 l/min, max. pressure 10 bar, tank volume 270 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V, weight approx. 197 kg Iiodpfx Aeyw Thvecfjf Location: Rieth

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, he Horizon BQ-270 is a fully automated, single-clamp perfect binder designed for short-run production, with a maximum speed of 500 cycles per hour and a book thickness range of 1 to 50 mm. Year 2006 General Specifications Binding Method: Binding with milling, binding without milling, and pad binding. Clamps: 1. Production Speed: Up to 500 cycles/hr. Automation: Features fully automated setup via an icon-based touchscreen, which can store up to 20 jobs in memory. Milling Depth: Maximum of 3 mm (0.12"). Glue Type: Uses hot-melt (EVA) spine glue unit with side gluing discs Warm-up Time: Approximately 40 minutes. Book and Cover Dimensions Dimension Metric Imperial Max Book Size (Spine x Fore-edge) 320 x 320 mm 12.6" x 12.6" Min Book Size (Spine x Fore-edge) 135 x 105 mm 5.4" x 4.2" Book Thickness 1 to 50 mm 0.04" to 2" Max Cover Size (Top-Bottom x Fore-edge) 320 x 660 mm 12.6" x 26" Min Cover Size (Top-Bottom x Fore-edge) 135 x 230 mm 5.4" x 9.1" Cover Weight Range 82 to 302 gsm Cover Pile Height Max 70 mm 2.7" Physical and Power Requirements Machine Dimensions (W x D x H): 2,300 x 860 x 1,250 mm (90.6" x 33.9" x 49.2") Iiodpjx Srg Hefx Acfof Machine Weight: Approximately 900 kg (1,984.5 lb). Power Consumption: Ranges from 2.7 kW Voltage/Frequency: 3-Phase power, with common configurations including 200V, 220V, or 400V at 50/60 Hz.

Condition: used, mileage: 5,72,584 km, power: 199 kW (270.56 HP), first registration: 05/2012, fuel type: diesel, overall weight: 14,000 kg, next inspection (TÜV): 03/2025, gearing type: automatic, emission class: euro5, loading space length: 8,250 mm, loading space width: 2,420 mm, loading space height: 2,050 mm, Equipment: ABS, air conditioning, tail-lift, Midlum 270 dxi EURO 5 Automatic transmission Air conditioning Aluminum box body 8.25 meters Tail lift 1,500 kg Side door Leaf spring suspension front and rear French registration Good condition Price €8,200 net Iiodpfx Aevdgrpocfsf

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, clamping force: 250 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 39 cm³, injection weight: 36 g, mold height (min.): 200 mm, power: 10.2 kW (13.87 HP), Year of manufacture: 2003 Clamping force: 25 tons Distance between columns: 270 x 270 mm Screw diameter: 25 mm Injection volume: 39 cc Injection weight: 36 g for PS Equipment: Conveyor belt, sprue picker, core puller, Euromap Iisdpfx Acexgiaqefsf Fully inspected! PRICE REDUCED FROM 6500 TO 5500 EUR!!!

Condition: new, bending length: 2100sheet thickness: 16upper roll diameter: 270 Iijdpod Ab Tfefx Acfjf Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 8.250.00 Side supports EURO 5.700.00 We have many references!

Condition: new, sheet thickness: 13bending length: 2550upper roll diameter: 270sheet length: 2550 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.690,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) Iodpfjd Ab R Tex Acfeif We have many references!

Condition: new, bending length: 3100sheet thickness: 10upper roll diameter: 270 Technical specifications: Ijdpsd Ab Tcjfx Acfeif - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 8.250.00 Side supports EURO 7.070.00 We have many references!

Condition: new, sheet thickness: 16bending length: 2100upper roll diameter: 270 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250-- - side supports EURO 5.700,-- - Automatic material extractor Iiodpfx Ajd Ab R Uocfjf - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 4100sheet thickness: 6upper roll diameter: 270 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls Iisdped Ab Tbjfx Acfof - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 8.250.00 Side supports EURO 9.660.00 We have many references!

Condition: new, sheet thickness: 6bending length: 4100upper roll diameter: 270 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel Iisdjd Ab R Ropfx Acfof - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.300,-- - side supports EURO 9.660,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 2600sheet thickness: 13upper roll diameter: 270sheet length: 2600 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Ijdpod Ab Tdjfx Acfeif Center support EURO 8.250.00 Side supports EURO 6.690.00 We have many references!

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,797 h, clamping force: 800 kN, screw diameter: 40 mm, total width: 2,042 mm, total height: 1,711 mm, overall weight: 8,200 kg, product length (max.): 4,545 mm, This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Additional information inclusive Wittmann Primus 16T robotTravel ranges: Z: 1250 mm, Y: 800 mm, X: 590 mm5 kg payloadControl system: Wittmann CNC8, Primus R8.3 softwareR8 Teachbox TouchVacuum circuit with additional 5/2-way valve • Injection Unit: 270 Powermaster with injection speed of up to 450 mm/s • Screw Diameter: 40 mm, type B, 3-zone screw • Nozzle Type: Pneumatically controlled needle valve nozzle with additional heating zone • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Clamping Force: 800 kN • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Hydraulic Unit: Fully integrated hydraulic unit 9 kW with 140 bar operating pressure • Pneumatics: 1 Air valve to 890 Liter, 1 additional Air valve to 890 Liter • Safety Cover Execution: Locked doors, top • Operator Identification: User recognition via PIN • EUROMAP 67: Standard + dynamic retractionInterfaces: Colour feeder, Freely Configurable DIO: 4x Output/2x Input Ijdpfxsx D Rlpj Acfjif • Tool Monitoring: Available on DFP • Voltage Fluctuation Compensation: UPS presentExtrasSocket box 1:X2510, Cekon, 16A /400V, 3P-N-PE via HSX2511, Cekon, 16A /400V, 3P-N-PE via HSX2512, Cekon, 16A /400V, 3P-N-PE via HSX2513, Cekon, 16A /400V, 3P-N-PE via socket contactor(Function 0060)Sockets for colour dispenser:1X2507 / 1W7145, Schuko 10A / 230V, 1P-N-PE, via HSplus 1X9507 / 1W9507, Schuko 10A / 230V, 1P-N-PE, via HSMount sockets and base housings on bracket 110.180.6902(Function 0060)1X3123, Zone 12 HAN 4A screw-in, power only1X9123, Zone 12 HAN 4A screw-in, sensor only(Function 0110)Pneumatics 1, 1x3/2WV 890L, mounted on DAP, W2008(Function 0470)Pneumatics 9, 1x3/2WV 890L, mounted on BAP, W2016(Function 0470)Cooling water 1:X4051 W9088 Flow measurement B1135 - B1138 (return),Pressure measurement B1211 (flow)X4060 W9260 HAN16E Temperature measurementB0801 (flow), B0832 (return)(Function 0490)Cooling water 2:X4050 W9086 Flow measurement B1147 - B1150 (return),Pressure measurement B1212 (flow)X4059 W9259 HAN16E Temperature measurementB08813 (Flow), B0814 (Return)(Function 0490)Dosing 1C:1x suction conveyor and 1x paint dosing1X2018/1W7146, HAN 4A for paint dosing1X9191/1W9946, HAN 3A for suction conveyormount sockets and base housings on holder 110.180.6902(Function 0550)