Used Pawert Briquetting Press for sale (12,115)

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm Cjdpfx Asu Nfn Rsi Serh total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. *

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel Cedpfxju Nfp Ie Ai Sjrh *

Condition: used, Technical details: Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec Credpfx Aou Nfwlji Sjh daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm Crjdpfsu N A Uuex Ai Soh - control via panel i.D. *

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: - foot plate 2200x1500x40mm * Cjdpfx Aiou N Ddwe Serh

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 02.056.00, overall weight: 11,000 kg, space requirement length: 2,420 mm, space requirement width: 2,040 mm, space requirement height: 3,220 mm, TECHNICAL DATA: - Pressing force (infinitely variable): 1000 kN - Max.ejector force: 30 kN - Retraction force: 300 kN - Pressing speed: 8 mm/sec. - Rapid traverse: 48 mm/sec. - Opening speed: 44 mm/sec. - Retraction speed: 23 mm/sec. - Press travel (stroke): 600 mm - Spray nozzle stroke: 70mm - Max.spray volume: 5 dm3 - Surface Ram top: 1000 x 1200 mm - Surface Ram below: 998 x 1280 mm - Distance between columns: 1130 mm Credpfjupy Abox Ai Soh - Plane parallelism between upper and lower plate: +/- 0.1 to 600mm lenght with uniform load distribution - Maximum mould weight: 7000 kg - Load capacity of swivel plate: 3500 kg - Power connected load: 30 kW - Motor power: 7.5 kW - Sprays pressure max-min.: 4 - 10 bar - Max.flow pressure: 190 bar - Return pressure: 190 bar - Air comsumption injection: 20 - 50 Ndm3 - Tank: 140 l

Condition: used, Year of construction: 2014, total length: 1,500 mm, total width: 1,150 mm, total height: 2,400 mm, Weight: 3.600 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 441 - Power [kW]: 3.0 - Press force [ton]: 28 - Max. working width [mm]: 1000 - Column gap [mm]: 950 - Throat depth [mm]: 220 Cedpfx Aioxapfto Sjrh - Backgauge depth [mm]: 415 - Transport dimensions: 1500mm x 1150mm x 2400mm (l x w x h) - Transport weight [kg]: 3600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, a complete workstation with integrated pneumatic system. featuring pneumatic two-hand release Cjdpfx Aioz E A Eho Ssrh Force: 45 kN Stroke: 60 mm

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Codpew Smukefx Ai Sorh Operation via two-hand control panel. (and one-hand operation) *

Condition: excellent (used), Catalog number 6763 TECHNICAL DATA - 5 hydraulic cylinders - 3 top cylinders - 2 side cylinders - max. length of bonded elements: 3100 mm - max. height of bonded elements: 2100 mm - engine power: approx. 2 kW Csdpfx Aiszulxlj Serh - top cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700 mm - weight: approx. 800 kg ADVANTAGES – very good condition – used press – unpainted – designed for professional use Net price: 13900 PLN Net price: 3233 EUR Net price calculated using an exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Year of construction: 1992, condition: used, Pressing force 40 t Cjdpfezdvcaex Ai Sorh Effective stroke 500 mm power capacity 17 kW tracking travel 48 mm Overrun time 110 ms safety distance 176 mm Condition: used Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: good (used), functionality: fully functional, Net price: 1,100.00 EUR Gross price: 1,309.00 EUR You will receive a proper invoice. Credpfx Aioz E N Dwe Sjh Internal article number: 26093 Pneumatic press Schmidt Pressing force: 32 kN Stroke: 100 mm Connection: 220 V Ram holder: D20 mm Table: 300 x 220 mm Hole in table: D50 mm Dimensions (L x W x H): 35 x 60 x 130 cm Weight: approx. 100 kg Fully functional. The pneumatic hoses should be replaced as they are partially porous. You are welcome to inspect the press while it is powered on, in our heated warehouse covering an area of over 500 m².

Condition: ready for operation (used), functionality: fully functional, color channels: 6 colour, number of print heads: 40,00,000, XEROX IRIDESSE PRODUCTION PRESS – 6 COLORS – FOR SALE Professional Xerox Iridesse Production Press available for sale in the Czech Republic. 🔹 6-Color Configuration 🔹 Total Meter: Approx. 4 Million Impressions 🔹 High-quality production digital printing Cedpfxez Ezt Dj Ai Sorh 🔹 Excellent for commercial printing, brochures, flyers, photo books, packaging, and premium print applications 🔹 Suitable for high-volume professional print production 🔹 Machine available for inspection in the Czech Republic 🔹 Professional dismantling and loading can be arranged 🔹 International export and transportation available 📍 Location: Czech Republic 📦 Condition: Used 🔍 Inspection: Welcome For price, detailed specifications, photos, videos, or further information, please contact us.

Condition: excellent (used), Year of construction: 2017, Ref:11156 . 2017 Schmedt Präleg XL Casing-in Pressing Machine For casing-in a variety of thin to thick books into flexible or hard cases. Special features: • Programme selection via touch-screen monitor • Very short set-up and strip down times • Auto wash-up of glue rollers after each book Vertical wing action Twin PVA cold glue tanks. Specification, Praleg 18-60: Crjdsz Hbuqspfx Ai Seh Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230 V + compressed air.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, pressing force: 100 t, stroke length: 270 mm, oil tank capacity: 400 l, total length: 1,200 mm, total width: 1,100 mm, overall weight: 7,500 kg, year of last overhaul: 2026, LAUFFER double-acting hydraulic press, 100/30 tons. The press has been completely refurbished and has not been used. I am also including 400 liters of hydraulic oil, so it is ready for use. For more information and a video demonstrating its operation, please contact the phone number provided. Crsdpfjz Hc A Nex Ai Ssh

Condition: repair required (used), Year of construction: 1993, functionality: not functional, input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 150 t, table length: 3,550 mm, oil tank capacity: 390 l, For sale is a robust hydraulic EHT bending press, type EHPS 15-35, manufactured in 1993. The machine comes from an industrial setting and, after repair, is ideal for sheet metal processing, metalworking, metal construction, contract manufacturing, or as a production machine for medium to heavy bending operations. The bending press has a working length of 3,550 mm and a pressing force of 1,500 kN, or approximately 150 tons. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive set of upper and lower tools as well as special tools. Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot currently be performed. The error must be bypassed or professionally repaired. After this error is resolved, the machine should be fully operational again. Therefore, it is being sold explicitly as a used industrial machine in need of repair for restoration purposes. The machine is in used condition, with signs of wear consistent with its age. There are signs of use, paint damage, and dirt, as shown in the pictures. The control cabinet, the control system, the tools, and the machine components are documented in the photos. An on-site inspection is possible and highly recommended, subject to prior arrangement. A functional test is only possible to a limited extent, as there is currently an error during the initialization of the stops. Equipment / Scope of delivery • Hydraulic CNC bending press EHT EHPS 15-35 • Cybelec DNC 880 control system Codpfx Aoz E U Dpoi Sjrh • Existing upper tools / punches • Existing lower tools / dies • Special tools included • Front supports / material supports • Foot switch • Side protection areas / safety guards • Robust EHT industrial design • Large working length of 3,550 mm • Pressing force approx. 150 tons Inspection / Collection The machine is located in an industrial hall and can be inspected by appointment. Disassembly, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be provided if necessary. Sales note Preferably sold to commercial businesses. No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been provided to the best of our knowledge based on the nameplates and available information.

Condition: good (used), Year of construction: 1990, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 63 t, table width: 800 mm, table length: 630 mm, total length: 17,900 mm, total width: 14,250 mm, total height: 25,500 mm, overall weight: 5,850 kg, height adjustment type: mechanical, stroke adjustment: 105 mm, Eccentric press LEN 63C. Year prod. 1989(SMERAL TRNAVA Czech Republic). Technical data: Cjdotzxdzspfx Ai Sjrh - pressing force: 63 tons - number of strokes in automatic: 65/130 min - number of jumps manual operation: 45/50 min - slider stroke adjustment: 10-105 mm - slide stroke: 70 mm - table surface: 800 x 630 mm - slider surface: 450 x 280 mm - overhang: 315 mm - table - slider clearance: 335 mm - clearance between columns: 355 mm - number of gears: 2 - motor speed: 730/1440 min - motor power: 4/7,5 kW - press dimensions: 1425 x 1790 x 2550 mm - weight: 5850 kg The technical condition of the machine is good. It is possible to make a visual inspection and check the machine in operation.

Condition: used, Ceramic tile press SITI MAGNUM 800. Pressing force: 800 tons. Cedexu N H Hopfx Ai Ssrh

Condition: used, Year of construction: 2003, Year of manufacture: 2003 Technical specifications: 2 colors + varnishing unit Max. sheet size: 740 × 1,040 mm 159 million impressions Rolandmatic Tresu varnishing unit CCI ink remote control IR/TL dryer Grafix Cantronic powder sprayer PPL power plate loading Automatic plate changing All washing systems Credpez Hnuksfx Ai Sjh Currently in production and operational Availability: available in the short term Price: upon request Location: Germany

Condition: ready for operation (used), Year of construction: 2026, Kaiser Press 50 -Exhibition machine / 0 operating hours Credpjztfbwefx Ai Seh -Electro-hydraulic drive -Operation: foot pedals and push buttons on the control panel -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width including hand crank and electrical unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with base: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (crossbeam): 245 mm -Crossbeam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the crossbeam via hand crank (no manual lifting required) -Hydraulic unit can be moved laterally: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 punches with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure gauge with pressure display -2 prism supports included -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 255 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2011, Condition: used, in working condition The robust frame construction and press beams ensure precise frame assembly and gluing. The press guarantees accurate squareness while preventing frame distortion or warping. Thanks to the long stroke of the hydraulic cylinders, the lower beam and the clamping jaws require less frequent adjustment. The lower beam features automatic lifting and locking. Technical Specifications • Maximum frame size: 3000 × 2000 mm Cjdpfxjzlyv Ts Ai Serh • Minimum frame size: 250 × 340 mm • Hydraulic pump power: 3 kW • Maximum total pressing force on the horizontal and vertical beams: 19 tonnes • Vertical hydraulic cylinder stroke: 1100 mm • Horizontal hydraulic cylinder stroke: 1200 mm • Lower beam adjustable to three heights: 380, 680 and 980 mm • Adjustable vertical and horizontal pressing pressure • Two horizontal fences with quick-adjustment system • Horizontal and vertical movements are controlled by lever-operated valves mounted on the machine frame • CE-compliant design • Pendant push-button control unit Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 2018, pressing force: 80 t, filling opening width: 1,040 mm, filling opening length: 1,110 mm, bale length: 1,200 mm, bale width: 1,120 mm, bale height: 1,120 mm, bale weight: 600 kg, total width: 1,830 mm, total height: 2,620 mm, total length: 4,200 mm, type of input current: three-phase, input voltage: 400 V, input current: 32 A, overall weight: 8,000 kg, input frequency: 50 Hz, DIXI 80 SLD Horizontal Baler – Year of Manufacture 2018 Used, fully functional DIXI 80 SLD horizontal baler for the economical compaction of cardboard, paper, and comparable recyclable materials. Technical data: Manufacturer: DIXI Model: 80 SLD Year of manufacture: 2018 Pressing force: 80 t Drive power: 11 kW Connection: 400 V / 32 A Feed opening: approx. 1,040 x 1,110 mm Bale size: approx. 1,120 x 1,120 x 1,200 mm Bale weight: approx. 500–600 kg, depending on the material Press cycle: approx. 35 seconds Throughput: up to approx. 1,000 kg/h, depending on the material Credpfx Aoz Hqwbei Soh Machine weight: approx. 8,000 kg Machine dimensions: approx. 4,200 x 1,830 x 2,620 mm (L x W x H) The machine is in used, fully functional condition. All information is provided without warranty. Subject to prior sale.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 133, product width (max.): 270 mm, working width: 270 mm, type of input current: three-phase, Equipment: documentation/manual, Semi-rotary flexographic printing machine MALBATE Mecaformat 270. 5 printing units + 1 varnish unit + rotary magnetic die-cutting unit. UV drying – 6 drying units. Compressed air: 7/8 bar. Maximum web width: 270mm Minimum web width: 150mm Maximum feed length: 220mm Minimum feed length: 50mm Maximum printing width: 260mm Maximum printing length: 305mm Maximum length of the semi-rotary cutting die: 220mm Csdpfxsyr R Sgs Ai Sjrh Maximum permissible unwind roll size: 3000m Unwind roll diameter: 800mm Rewind waste roll diameter: 450m Rewind roll diameter on the automatic splicer (AS): 360m Maximum speed: 10,000 impressions/hour The machine is currently in production. An inspection can be arranged by appointment. Details are available in the PDF file. For further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1989, BESSER paving block machine - VIBROBLOCK Year: 1989 Pallet dimensions: 1450x1100mm. 5 molds for paving blocks. Specially equipped for color production, with 3 hoppers for the main mixture and 1 hopper for the facing mixture. Double Power Trainer 40 ft container for controlling the mixers. 2 elevators with a height of 26 ft. 1 pallet truck. Belt conveyor for double paving blocks. Device for loosening the stones. Set of feeders for the line, entry for wooden pallets. Crjdpfxsz H Ib Dj Ai Sjh 2 mixers for mixtures with a container, 3000/2500, mixer 750 / 0.5m3 ltr. Concrete bucket for the BESSER machine with a rail. Operational condition.

Condition: new, Year of construction: 2025, type of input current: AC, power: 5.5 kW (7.48 HP), input voltage: 400 V, Pelleting plant for a wide variety of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, maize straw ....) Animal feed ..... This is a complete system (compact system), which is built on a base frame and consists of the following components: Storage container for raw material 1.5 m³, incl. agitator Inclined mixer for raw material incl. level sensors and fully automatic moisture metering Dosing screw for optimum material feed to the press (speed-controlled) Press 5.5 kW, with horizontal round die, discharge chute with dust separation, temperature monitoring Conveyor belt for pellet removal, discharge height approx. 2.0 m The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! Csdpfx Aoud Nx Hji Serh Price excl. VAT! The price includes operator and service training (in A-4352 Klam)! Attention, some of the pictures do not correspond to the actual system ( are example pictures ) !!!!! Attention!!! we are constantly looking for sales and service partners (worldwide) !!!!!