Used Polar Mohr 76Em for sale (230)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Bodpfxozd Uvlo Af Ajln Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm); towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Brake System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lower and raise positions Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation (no calibrated scale) Tire pressure monitoring system *Wheels and tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, Aspöck Eco LED II multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting, (Note: With certain towing vehicles, false diagnostics may occur even though the system is functioning properly) 2 white LED front position lights 2 white/red rear lane-keeping lights (LED) 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated by the reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the crossbars, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holders Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint Finish Frame hot-dip galvanized or painted according to customer preference

Condition: excellent (used), Electro-permanent magnetic clamping plate 500 × 300 mm EPEFINE2 incl. control unit – sinker EDM / EDM Electro-permanent magnetic clamping plate, type EPEFINE2, including the corresponding control unit. Technical data: Magnetic clamping plate approx. 500 × 300 mm Fine transverse pole spacing 5 mm Voltage 360 V DC Design for sinker EDM / EDM with special seal, special cable and special cable gland Polarity reversing control unit, type BUR-20 for EP system Magnetization/demagnetization Blodpfxjzyq Upo Af Ajn Machine interlocking System installed in 2017; the original new price of all items at the time was €6,327 net / €7,529.13 gross, including transport. Inspection and collection possible by arrangement. Shipping/freight forwarding by agreement.

Condition: used, functionality: fully functional, first registration: 11/2024, Year of construction: 2024, We are offering this used LITHEC LithoFlash Inline HBDM XL75 Inpress Control Lithec Heidelberg XL75, year of manufacture 2024. The Lithec system is a suitable alternative to Heidelberg’s InpressControl. Type: LithoFlash® Inline HBDM XL75 Serial Number: GG 0326 Year of Manufacture: 10/2024 The system was removed because the press it was installed in has been sold to Asia, where there is no demand for this system. Inline measurement and control system for offset printing Reduced make-ready times increase job throughput. Significant waste reduction results in direct substrate cost savings. In addition, using a measurement and control system also ensures production quality. Application Areas • For sheet-fed and web offset printing presses with a production width of 52–205 cm • Measurement and control of process ink and special color densities • Monitoring of tone value increase, print contrast, and trapping parameters Customer Benefits • High savings thanks to LithoDyn dynamic control • Minimal energy costs due to flashing LED • Clearly structured, user-friendly interface • Definable print control strips • Effective protection against contamination thanks to innovative glass/visor system • Long service life and low operating costs Measurement Methods and Sensors • Wear-free sensor system with integrated dust and dirt protection Bodpfxsyrp Umo Af Asln • Density measurement in accordance with ISO standards • Parallel measurement of all density channels over the entire print width • Measurement of each sheet • 0/45° optics • Maintenance-free, long-life LED measuring light • Polarizing filter • Measuring range: 0.0 – 2.2 D • Use of existing print control strips possible • Selectable height, width, and configuration of measurement fields (minimum size 3×4 mm) • Strip library for optional use of various print control strips • Reproducibility: 0.01 D depending on measurement conditions • Line speed up to 15 m/s Scope of Delivery • Sensor crossbar • Control unit, industrial PC with 23” touchscreen • For the operation of necessary electrical and mechanical assemblies • Advanced Dust Protection (enhanced contamination protection) • LithoDyn (dynamic control) • LithoJobChange (dynamically controlled job change) • LithoFlash One Shot (measurement and control with press at standstill) Naturally, the system can also be installed on machines other than the XL75, such as: KBA RMGT Komori Manroland If you have any questions or would like further information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2002, This Knorr SL-2-V-E stack lifter is a robust and versatile solution designed for industrial environments. Built with a durable steel frame, it is specifically engineered to handle heavy loads and streamline workflows in paper processing. The stack lifter efficiently raises paper stacks to an ergonomic working height, making it ideal for operators using cutting machines or vibrating tables. Its adaptable design allows for use on both sides???whether feeding or removing stacks???enhancing flexibility and productivity in the workplace. Compatible with leading cutting machines such as Polar, Wohlenberg, and Perfecta, this stack lifter is a reliable addition to any industrial setting, ensuring smooth and efficient material handling. Manufactured in 2002, this unit is currently available from stock in Germany. Format: Equipment: Robust steel frame construction for industrial loads Stack lifter Stack lift for cutting material: Paper stacks are brought to working height Ergonomic working height for operators on cutting machines or vibrating tables Suitable for cutting machines such as Polar, Wohlenberg, Perfecta Can be used on both sides ??? for feeding or removing stacks of paper Bodpfx Afjvlx H Ij Asln

Condition: ready for operation (used), Wagner 752-ST/1 polarity reversing unit / control unit 340659, serial number: 529597, used, in good condition, 100% functional, scope of delivery as shown in the photos. Blsdpjz Adh Isfx Af Ajn

Condition: good (used), Buchi NIRMaster Spectrometer Bsdpfjz E S Dgsx Af Aoln 2015, The Buchi NIRMaster model NIRM54 worlds first dedicated stand alone spectrometer, manufacturer in food grade PMMA. The accuracy and reproducible performance of polarization FT technology plus the hygienic design with certified dust protection meets the easy cleaning processes requested for at-line machinery, with manual

Condition: used, used, good conditionMake FrommiaType 705 P1MachineNo. 119mobiletiltable from 0 to 45°motor 2 speeds/polarity reversible6 speed levels 2500/4500/5000/6000/9000/12,000 rpmright-left rotationtable size 1000 x 900 mmmilling arbor diameter 30 mmmilling fence with fine adjustmentsuction connection D 120 mmspace requirement approx. 1000 mm x 900 m x 1200 mmWeight approx. 400 kgStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspectedwithout guarantee and warranty Blsdpfx Afevxr Rto Aen

Condition: used, Quantity: More than 40 available Manufacturer: Indu-Sol Type: PNMA II PROFINET measuring device, version 3.0 (114090100) Mounting: 35 mm DIN rail Dimensions: 105 × 39 × 74 mm Weight: 310 g Input voltage: 24 V DC (20-28 V, reverse polarity protection) Output voltage: 24 V DC (max. 1 A) Current consumption: approx. 50 mA Power dissipation: approx. 1 W Protection rating: IP20 Connector: RJ45 Bljdpfszlt Hxjx Af Ajn Delay: < 1 bit/s at 100 Mbit/s Cable length: up to 100 m (Cat5/Cat5E) Operating temperature: 0 °C to +70 °C Storage temperature: -15 °C to +75 °C Humidity: 10 – 90 %, non-condensing

Year of construction: 1974, condition: used, functionality: unexamined, For sale: - Circular saw mill, type OS65, from a carpentry/lumber mill in very good condition. - Low operating hours, only approx. 800-1000 m³/year. - Clamping carriage, self-propelled. - Auxiliary carriage. - Approx. 15m of guide rails for the clamping carriage/auxiliary carriage. - Splitting wedge/outfeed rollers, not driven. - €20,000 net / plus VAT. Bodpfoz Dn Ulsx Af Aeln The following are also available separately: - Log infeed system - Chain hoist with transverse conveyor Prior inspection is required.

Year of construction: 1998, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, Complete Technological Line for tomato paste production - 3-stage vacuum evaporators Professional industrial plant for the concentration of tomato juice and fruit juices. Manufactured by the experienced Bulgarian manufacturer Thermohran Engineering, this system is designed for high-quality production, preserving the organoleptic characteristics of the product through low-temperature vacuum evaporation. Technical Specifications: Manufacturer: Thermohran Engineering Ltd. (Bulgaria) Year of Construction: 1998 Material: High-grade Stainless Steel (Inox) System Type: 3-stage Vacuum Evaporator Components Included: * Main Evaporation Columns II.5. GENERAL LAYOUT DATA OF THE COMPLETE LINE Capacity (processed tomatoes) t/24h 150 Product capacity 28-30 oBrix kg/h 1 000 Bsdpfx Ajzfx Dvjf Ajln Steam consumption kg/h 4 000 Tap water consumption m3/h 10 Sealing water consumption m3/h 0.7 Electrical consumption kW/h 147 Water consumption t = 18 oC m3/h 78 t = 28 oC m3/h 195 Air consumption at P= 4 bar nm3/h 7 Mounting area m 6x40x6m (in the area of the evaporating installation the height must be 13 m) Complete Control Panel (Brix meter) Pumping Station (centrifugal pumps) External Cooling Tower / Heat Exchanger unit Applications: Enrichment of tomato juice (Double and Triple Concentrate). Fruit juice concentration.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots Bsdpfx Afszrr Uue Ajln • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: new, Wagner 756-EP360/60S polarity reversal unit, serial number: 603464 / 3x400V AC 50/60Hz - 360V DC 60A, unused, 100% functional, scope of delivery as shown in the photos. Bedpfez Adh Ujx Af Ajln

Condition: used, Type SD 15 / 35 . Technical data : Length: 350 mm Bjdpfszzlnaex Af Asln width: 150 mm Polarity ~ 9 mm . Space requirement approx.: L:440 x W:210 x H:135 mm . Voltage: 24V Current: 2,04A

Condition: used, Year of construction: 1985, Technical details: Blodpfx Asu Ndcmef Asn x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit *

Condition: excellent (used), Year of construction: 1966, Zeiss measuring microscope type WMM 150 /75 built in 1966 it is used to measure workpieces of all kinds, especially gauges, molds, thread gauges, templates, etc right angles x+y and polar coordinates x or y Its test range is 150 x 75 mm incl. operating instructions + accessories Blsdpfx Afot T Uave Aon

Condition: new, Year of construction: 2027, TALC POWDERING MACHINE FOR ELECTRICAL CABLES EXTERNAL DIMENSIONS Powdering unit : L450 W450 H1500mm Filtration unit : L750 W750 H1825mm Bljdpjvxfg Iefx Af Aon Both units are connected to each other with Ø80mm air hose and clamp system CABLE PASSAGE Size : 100 mm diameter Height from ground : Manually adjustable, from 1.000 mm to 1100mm Cable insulation material : PVC, PE, XLPE to be used Cable size to be powdered: 5–70 mm diameter HIGH VOLTAGE UNIT Input voltage : 14V 16kHZ Output voltage : 100 kV Max. current : 120 µa Polarization : Negative TECHNICAL SPECIFICATIONS OF THE MACHINE Input : 220V 50 Hz Installed power : 1 KW Extraction fan : 3.000 m³/h 0,75KW Vibration : 0,15KW 220V Compressed air : 6-10 bar Air consumption : 300 lt/min Filtration : 320x300mm polyester filter Filter cleaning : Automatic Powder recycling : Vibration sieve Powdering method : Application by 2 electrodes, electro static application • Cable passage height from the ground adjustable, according to your extrusion line • Coating and filtration unit can be combined or separately

Condition: ready for operation (used), functionality: fully functional, Condition: used / very good Availability: immediately Blsdeyx Spnspfx Af Aon Description: Keyence LJ-V7080 laser profile sensor (measuring head) from the LJ-V7000 series. Suitable for precise profile and height measurements. Scope of delivery: measuring head LJ-V7080 only (without controller / without accessories) Location: Vöhrenbach - Germany Price: €800

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5000 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm Bljdpfxov Dxw Ro Af Asn tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: new, Nexturn SA32B with the following attachments: - Iemca Boss 338 bar feeder Max. machining diameter: 32 mm Max. machining length: 210 mm Axes: 7 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for powering the machine and control with 200 V / 50 Hz and chip conveyor for mounting on Nexturn machines, with machine tank Modular system, all driven tools are from WTO, Made in Germany incl. ejection of long parts Scope of supply: FANUC Oi TF+ CNC control with 7 controlled axes C-axis on main and counter spindle Main and counter spindle collet type standard Synchronously driven guide bushing unit Guide bushing type standard Standard equipment tool holder Linear slide 5-position tool holder shank 16x16mm 4 drilling units ER16 Drilling unit for front/rear face machining, with 5 drilling sleeves ER16 Counter spindle for rear machining Rear machining with 4 machining stations ER16 Drive unit for tools for rear machining, 2 stations fixed and 2 stations driven Pneumatic workpiece ejection device Part ejection control Blow-out device for counter spindle Workpiece remover Workpiece conveyor for removing the workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adaptation up to 100 bar) Coolant through the counter spindle Automatic central lubrication with level monitoring Tool box with special tools Interface for bar feeder Interface for chip conveyor PCMCIA card slot USB interface RJ-45 LAN interface RS 232 C interface Control functions in standard scope of supply: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear corrections Operating hours display Workpiece counter Network connection Background machining Automatic power-off function Program flow controllable via handwheel High-speed skip function for using measuring probes Spindle speed monitoring (G25 - G26) Thread cutting with variable pitch (G34) Blsdpsvyzqfefx Af Aen Circular arc thread cutting (G35 - G36) Cutting radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate conversion (G68.1 - G69.1) Multiple repetition cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main and counter spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and counter spindle (M56 - M57) 4 additional free M commands

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Bodpfx Ajyxw Ddjf Aoln Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: excellent (used), Catalog number 8114 Bedpfx Afez Earro Aoln TECHNICAL DATA - Working length of the shelf: 3070 mm - Working width of the shelf: 1030 mm - 4 working stations - Max. thickness of bonded components: 150 mm - Automatic rotation - 6 hydraulic cylinders per working station - 3 pressure plates per working station (from the front) - Overall dimensions (L/W/H): 5200x2450x2600 mm - Weight: approximately 6000 kg ADVANTAGES - German-made - 4 working stations - Rotatable - Used machine, very good condition Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: new, Nexturn SA32B with the following attachments: - Loading magazine Iemca Boss 338 Max. machining diameter: 32 mm Max. machining length: 210 mm Axes: 7 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for supplying the machine and control with 200 V / 50 Hz and chip conveyor for mounting on Nexturn machines, with machine tank Modular system, all driven tools are from WTO, Made in Germany incl. discharge of long parts Bsdpsvyzp Isfx Af Ajln Scope of delivery: CNC control FANUC Oi TF+ with 7 controlled axes C-axis on main and counter spindle Main and counter spindle collet type standard Synchronously driven guide bush unit Guide bush type standard Standard equipment tool holder Linear slide 5-position tool holder shank 16x16mm 4 drilling units ER16 Drilling device for front/rear face machining, with 5 drilling sleeves ER16 Counter spindle for rear face machining Rear face machining with 4 machining stations ER16) Drive unit for tools for rear face machining on 2 stations fixed and 2 stations driven Pneumatic workpiece ejection device Part ejection control Blow-out device for counter spindle Workpiece ejector Workpiece conveyor for removing the workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adjustment up to 100 bar) Coolant through the counter spindle Automatic central lubrication with level monitoring Toolbox with special tools Interface for bar loader magazine Interface for chip conveyor PCMCIA card slot USB interface RJ-45-LAN interface RS 232 C interface Control functions in standard scope of delivery: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear corrections Operating hour display Workpiece counter Network connection Background machining Automatic power-off function Program flow controllable via handwheel High-speed skip function for using measuring probes Spindle speed monitoring (G25 - G26) Thread milling with variable pitch (G34) Circular arc thread cutting (G35 - G36) Cutting radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate conversion (G68.1 - G69.1) Multiple repetition cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main spindle and counter spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and counter spindle (M56 - M57) 4 additional free M commands

Condition: new, VAS 5908 Vehicle Charging Computer Charging computer for vehicle starter batteries (lead-acid, Ge, AGM, and fleece batteries) Bjdpfx Afsv Hptzj Aeln Battery charger / external power supply with MPC4 control board and nominal 14VDC charging voltage (suitable for 12VDC vehicle electrical systems/batteries) - 100% vehicle electrical system compatibility, protection of on-board electronics/airbags - Use as a charger, external power supply, and for vehicle supply in buffer mode (support during diagnostics/programming) - Extensive protection and self-protection functions - Short-circuit and reverse polarity protection - Protection function in the event of battery defects - Reliable spark suppression - Convenient menu navigation / configurable charging parameters - Built-in communication interface - Sealed housing, protected from internal contamination Housing version 'B': Advantageous for industrial production lines - Status indication via display and high-power LEDs - Menu navigation: German, English, French, Italian, Spanish - Extensive Accessories include an external operating status indicator (DBL-SIG-LR, remote indicator), power/charging cable, wall mounting bracket, etc. - Option: Custom charging parameters - Option: Low-temperature operation down to -40°C - Option: Battery diagnostic system - Option: Regeneration charging for deeply discharged batteries - Electrical safety - Certifications: EN60335, EN60950, UL60950-1, UL1236, CSA C22.2 No. 60950-1-07 Used by leading automotive manufacturers Input voltage: 100-240VAC wide range (tolerance: 85VAC-265VAC), 45-65Hz 130-350VDC; NOTE: Use special firmware for use in combination with inductive power transfer! Inrush current / 30A at 264VAC, temperature independent Circuit breaker: 16A slow-blow (e.g., characteristic B) Full load current / 10A (115V/230V) Power factor / >0.98 No-load power / 10W deactivated at output Input fuse / F1 (2x 7A-8A T)/250V (6.3x32mm) Transient surge protection / Varistor (8kA / 151J) Input connection / IEC/EN 60320, C14 Weight: 8.2 kg Find more items - new and used - in our shop! International shipping costs upon request!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm), towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Blodjzfp Uxopfx Af Aon Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Braking System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly *Wheels and Tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting (Note: With certain towing vehicles, false diagnostics may occur even though the function is working properly) 2 white LED front position lights 2 white/red LED rear lane-keeping lights 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated via reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration / License Plates Germany With DEKRA inspection and certification (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holders Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Hot-dip galvanized frame, including passivation “15-year warranty against rust-through” Drawbar: galvanized or black, at the manufacturer’s discretion Customized transport solution

Condition: good (used), machine/vehicle number: 50-14-05-3-23, We offer the following for sale here: Item number: 12878 Prince Technologies PrinCe 560 Capillary Zone Electrophoresis System Connections: Mains, HV control, parallel port A, parallel port B, Psxh8M Series port A (RS232), Series port B (RS232). Technical data: Injection method: up to 650 min, in 0.01 min steps; Hydrodynamics: 180 - 250 m bar, in 1 mbar steps, electrokinetics; -30 to + 30 kV, current and/or voltage Flow/pressure range: 0 to +3000 mbar from DCI device. Bedeu Eb D Hepfx Af Aeln Volt range: 30 kV to +30 kV Current range: -200uA to +200uA Rise: Programmable volt or amp rise Polarity reversal: Programmable before and during the sample run. Autosampler: Position carousel for 30/48 sample and buffer vials. Variable vial size, including Eppendorf micro centrifuge tubes. Buffer volume: Max. 4 ml Sample volume: Min 10ul, max 4 ml. Temperature control: sample and buffer 4 C to 40 C. Lapillary output: 5 C to below 60 C Detector: Allows the use of: UV/Vis, fluorescence, diode array, LIF, conductivity, electrochemical and MS. Year 2004 Model PrinCe 560 0500.022/CR S/N: 50-14-05-3-23 Dimensions:50x50x54 cm Weight: 35 kg without function test