Used Ponndorf Spent Grain Silo for sale (1,383)

Condition: new, Year of construction: 2025, A sand aggregate production plant is a facility where various types of aggregates (such as sand, gravel, crushed stone, or recycled concrete) are produced for use in construction and other applications. These plants typically include various stages of processing, from raw material extraction to the final product. Here are the key components and processes typically involved in a sand aggregate production plant: 1. Raw Material Extraction: - Quarrying or Mining: Aggregates are often extracted from quarries, mines, or riverbeds. Depending on the type of aggregate, the extraction process may involve drilling, blasting, or dredging. 2. Primary Crushing: - Jaw Crusher or Gyratory Crusher: The extracted raw material is usually transported to the plant and fed into a primary crusher, where large rocks are broken down into smaller pieces. 3. Secondary Crushing: - Cone Crusher or Impact Crusher: The crushed material from the primary crusher may undergo further reduction in size through secondary crushing. 4. Screening: - Vibrating Screens: After crushing, the material is often screened to separate different sizes of aggregates. This process ensures that the final product meets the required specifications. 5. Washing: - Sand Washers: In some cases, especially for sand production, washing is done to remove impurities, clay, and fines from the aggregates, ensuring a cleaner and higher-quality product. 6. Grading and Sorting: - Classifiers or Graders: After washing and screening, the aggregates may go through additional processes to separate them based on size or quality. 7. Stockpiling: - Stockpiles: The final aggregates are usually stockpiled for storage before being transported to construction sites or other end-users. 8. Aggregate Storage and Handling: - Storage Bins or Silos: Larger production plants may have storage facilities, such as bins or silos, to store different types and sizes of aggregates before distribution. 9. Quality Control: - Laboratory Testing: Regular quality control testing is performed on aggregates to ensure they meet specifications for strength, size, gradation, and other properties. 10. Environmental Considerations: - Water Management: Some plants incorporate water management systems to recycle and reuse water used in the washing process, minimizing environmental impact. Gedoq Ngb Djpfx Akaokb 11. Transportation: - Conveyors or Trucks: Aggregates are typically transported from the production plant to construction sites by conveyors, trucks, or other means.

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. Gkedpfx Akeq Nyuveaeb 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: excellent (used), Year of construction: 2015, COMPLETE PELLET PRODUCTION LINE 6 t/h Hydraulic walking floors - double for hard and soft wood Conveyor belt 12m with magnetic separator for chips Two hammer mills each 130 kW for wet material Two beams with hydraulic floor befor drum dryer Dryer for drums of 12 m FIEDLER boiler 3.5 MW Refiner 250kW with transport fan and filter Silos bin ZEPI for dry material Z conveyor ZEPI above three silo bins for pellet mill 0qe0k TRI Pellet Mill ZEPI ZPM600 with 200kW (2pcs) and 160Kw Pellet mill production year 2015 (two pcs) Conveyor belt 10m for hot ball, conditioner and aspirin system vibro sieve ESSEGI packaging system (ITA) 2019 Pallet system ROBOTIK KOGLER (SLO) 2015 Grecon spark detection system Electrical cabinet room for complete equipment Gedpfxjqy Hcdj Akajkb Line in operation, capacity 6-7 t/h

Condition: new, Year of construction: 2026, Weima Hacker/Shredder WL 8 with Top Equipment - 2nd knife row, log spacer, 4-sided segment base, discharge auger with geared motor, Fast hydraulic reverse with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used, for example, thousands of times in wood processing companies worldwide. The high number of these highly sought-after shredders guarantees a tried-and-tested and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components for this – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the gate timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. No material bridging thanks to self-cutting hopper design The hopper performs several tasks at once. The material to be shredded is initially fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill in very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is crucial for shredding. Even with bulky parts, the shredder cuts itself free. If required, hopper extensions and lids with gas springs are also available. Long-lasting rotor bearings thanks to offset design Due to the extreme stress during shredding, a rotor bearing must be particularly robust. To prevent dust or foreign objects from entering its interior, we have separated it from the machine frame. This also makes it very easy to maintain and access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd knife row - Log spacer Gjdpfepdqzxjx Akaskb - 4-sided segment base - Discharge auger with geared motor - Fast hydraulic reverse with shock valve - Mesh size 15/20 mm List price: EUR 52,320, sold at a special price Location: Ex warehouse 54634 Bitburg - immediately available - The pictures show a machine without a discharge auger; it will be in stock soon.

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Gkodpfx Akjpuy H Dsaob Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: good (used), For sale: - Injection molding machine, EPS pre-expander, automatic line for EPS (expanded polystyrene) box production – thermo boxes, fish boxes – used, in very good condition. The machine is currently still connected to the installation, which facilitates disassembly and labeling of individual connections for the buyer. - Complete machine, ready for connection to steam installation, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of EPS thermo boxes and fish boxes, 3 sizes, with or without holes, with lids – total of 6 configurations. Complete boxes with lids are produced in a single cycle – no need to change molds. - Set includes intellectual property rights to the box and fish box designs – full documentation provided. IMPORTANT! The machine can also be used to produce EPS construction shapes for walls, ceilings, etc. – see examples in one of the photos. We also have other production line components available. Check our other listings. We also have additional equipment for sale such as: - Injection molding machine, EPS pre-expander, automatic line for EPS foundation boards + mold for boards - EPS batch pre-expander - Steam installation: boiler house – machinery Gedpjua Dqisfx Akaskb - 3 m³ steam tank - Installation for transporting expanded EPS - EPS silos - EPS crusher - Many spare parts Additional photos and information available upon request by email. Option to sell individual components of the set separately.

Condition: used, Year of construction: 2020, Overview This lauter tank was manufactured by the company INOXDUBRA in Spain in the year 2020. This fully functional lauter is in good condition and free from defects (such as scratches, dents). With a capacity of 10,000 liters, it is ideally suited for filtering 5,000 - 8,000 liters of wort. It is currently located at the owner's factory and is being sold because they are investing in another production line. Components: Filtering bottom Cutting blades Motor, gearbox with its speed variator Automated Guillotine valve for spent grain discharge Upper door Leg extensions CE certification and tank blueprints Gjdpfxstq Dzpj Akaekb

Condition: like new (used), Year of construction: 2026, operating hours: 6 h, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Gkodexfwdepfx Akaeb Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, Industrial Rotary Valve, Rotary Airlock Feeder, Used machine Manufacturer: Unknown / Industrial execution Type: 8-pocket rotary airlock Condition: Used, robust industrial execution Overall dimensions: 1000 x 630 x 770 mm Technical and operating parameters: Inlet size: 510 x 510 mm Outlet size: 510 x 510 mm Number of pockets/cells: 8 pcs Pocket/cell dimension: 490 x 200 x 200 mm Gkjdszwfbxepfx Akaeb Pocket/cell capacity: 9.8 liters Design / Operation: Heavy-duty rotary airlock feeder unit equipped with a large chain drive sprocket. Designed for controlled feeding and pressure sealing of bulk materials. Suitable Application Areas: Dust collection and filtration: Installation below cyclones, dust collectors, and bag filters for continuous dust discharge while maintaining system air seal. Bulk material handling: Uniform feeding of powders, granules, wood chips, pellets, sawdust, or feed materials from silos and hoppers. Agricultural and chemical industry: Metered discharging of dry granular and powdered raw materials into processing or packaging lines.

Condition: good (used), mileage: 1,53,323 km, power: 294 kW (399.73 HP), first registration: 05/2009, fuel type: diesel, axle configuration: 8x4, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Equipment: electric window regulation, power mirror, - Brake booster - Air-suspended seats - Air horn - Rotating beacon - Sun visor - Windshield - Power take-off (PTO) Front axle 1: Steered Front axle 2: Steered Number of cylinders: 6 Engine displacement: 10,518 cc GVW: 35,000 kg Body manufacturer: WIELAND B.V, BB.8200 TG Technical condition: good Optical condition: good MAN TGS 35.400 BB 8x4 WIELAND BLOWVAC BIGBAG 8200 – DRY MATERIAL SUCTION/BLOWING SYSTEM First registration: 04.05.2009 Operating hours: 13,442 hrs Drive: 8x4 Suspension: Leaf spring Engine power: 400 hp For sale is this MAN TGS 35.400 BB 8x4, equipped with a professional Wieland dry material suction/blowing system, type BlowVac BigBag 8200. This heavy-duty industrial unit was specifically designed for the suction, collection, transport, blowing, and filling of dry materials and bulk goods. Thanks to the powerful vacuum system and extensive equipment, this vehicle is suitable for numerous industrial applications. CHASSIS / TRUCK * MAN TGS 35.400 BB * 8x4 drive * Engine power: 400 hp * Heavy-duty MAN chassis * Leaf spring suspension * Suitable for heavy industrial applications * First registration: 04.05.2009 WIELAND DRY MATERIAL SUCTION SYSTEM Manufacturer: Wieland Type: BlowVac BigBag 8200 Design: Industrial dry material suction/blowing system Equipment includes: * 3-vane rotary piston vacuum pump * Maximum vacuum / maximum suction power: 900 mbar * Total container volume: 10 m³ * Suitable for the suction of dry materials and bulk goods * Blowing system available * Filling system available * BigBag system * Controlled emptying and filling of the collected material possible SUCTION CONNECTORS * Suction connector Ø 200 / 150 mm * Dome lid with suction connector * Large maintenance opening * Good accessibility for cleaning and maintenance work FILTER CHAMBER The Wieland system has a separate filter chamber for processing dry and dusty materials. This makes the system particularly suitable for applications where larger quantities of dust, powder, sand and other dry materials need to be collected. OPERATION & EQUIPMENT * Remote control * Blowing system Gedpfx Aozxgl Ijkaskb * Filling system * BigBag system * Storage area * Storage area with sideboards * Various connections for suction hoses * Maintenance opening to the filter chamber * 2 supports at the rear of the vehicle * Heavy-duty industrial design OPERATING HOURS 13,442 operating hours APPLICATION POSSIBILITIES This MAN/Wieland combination is suitable for, among others: * Industrial cleaning work * Suction of dry bulk goods * Sand and dry construction materials * Dust and powder * Cement-like materials * Production residues * Cleaning of silos and industrial plants * Factories and industrial plants * Construction and infrastructure projects * Filling into BigBags * Blowing out of the collected material DESCRIPTION A heavy-duty...

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, We are offering for sale a complete, fully functional ZREMB concrete plant, designed for the production of ready-mix concrete, precast elements, and paving stones. The plant is equipped with high-quality components from reputable manufacturers, automatic control, and a modern recycling and heating system, enabling year-round production. Key equipment: ZREMB Concrete Plant • Complete steel structure with enclosure, • Automatic control system SAUTER GmbH SUS 4.0, • Control container, • Full automation of the production process. ORU Mixers • Planetary mixer 750 l, • Planetary mixer EPM 3000 ES (3000 l), • EPM 3000 equipped with two independent discharge outlets, increasing production capacity. Dosing System • Lifting and filling device, • Tipping skips, • Buffer tank above the mixers, • Aggregate distributor for two mixers, • Cement scales for both mixers, • Water scale with flow meter, • Chemical additive dispenser, • Liquid pigment dispenser, • Microwave moisture probes in the mixers and aggregate tanks. Material Storage • Aggregate storage silo 6 × 25 m³ with a roof, • Aggregate belt scales, • 3 cement silos with complete equipment, • 1 two-chamber silo, • 5 screw conveyors. FEGO INDUSTRY Recycling System Complete installation for concrete and washout water recovery: • Capacity 12 m³/h, • Aggregate washing 2–32 mm, • Aggregate separator, • Washout water tank 40 m³, • Intermediate tank 1.5 m³, • Recycling tank, • 3 slurry pumps. FEGO INDUSTRY Heating System Water heating • Boiler 255 kW, • Capacity: • 13,500 l/h (10°C → 45°C), • 6,750 l/h (10°C → 70°C), • Fuel: light fuel oil, • Fuel consumption: 21.5 kg/h. Aggregate heating Hot air system: • Thermal power 250 kW, • Air temperature 110–120°C, • Capacity 6500 m³/h, • Fan 18.5 kW. Thanks to the installation, production is possible even during the winter season. The sale also includes: • Complete supporting structure, • Working platforms, • Enclosure made of sandwich panels, • Technological installations, • Electrical installations, • Complete control system, • Technical documentation (if available). Advantages - Automatic concrete production - Two independent ORU mixers - Two discharge outlets from the EPM 3000 mixer - Complete washout water recycling - Water and aggregate heating - Possibility of operation throughout the year - Complete installation ready for dismantling and reassembly Gedpfxjzw Aq Ro Akaokb Interested parties are invited to contact us by phone at 605 583 061 to obtain detailed information and arrange a presentation of the equipment.

Condition: used, mileage: 9,94,950 km, power: 382 kW (519.37 HP), first registration: 01/2015, fuel type: diesel, empty load weight: 11,648 kg, overall weight: 26,000 kg, tire size: 385/65 R22,5 - 315/80 R22,5, axle configuration: 6x2, wheelbase: 3,900 mm, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 16 m³, loading space length: 5,700 mm, loading space width: 2,430 mm, loading space height: 1,200 mm, Equipment: ABS, EBS, additional headlights, cruise control, differential lock, navigation system, parking air conditioner, parking heater, retarder, traction control, trailer coupling, Urea tank (AdBlue) Engine displacement: 16,353 cc 50 mm trailer coupling Gkjdpfxjzqu Rve Akaeb Hydraulics (auxiliary drive) Low noise Euro 6 A Payload: 14,352 kg Long-haul cab Automatic climate control Aluminum tipper body with plastic floor Roller cover Foldable underrun protection Grain conveyor Sun visor 2 bunks Air horns Subject to errors.

Condition: new, empty load weight: 2,810 kg, maximum load weight: 8,990 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,500 mm, total length: 8,120 mm, suspension: other, color: grey, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, - FLIEGL Tandem platform trailer TPS 118 with angled rear and ramps - New vehicle, delivery time upon request - Price: 21,900 EUR plus VAT - Fine-grained steel welded construction, hot-dip galvanized - 6 pairs of lashing eyes in the floor, each rated at 5 tons - Storage box - BPW drum brake axles - Parabolic suspension with maintenance-free steel/rubber/bearing system - 235/75R17.5 tires - Permissible total weight: 11,800 kg, unladen weight: 2,810 kg - Payload: 8,990 kg - Overall length: 8,080 mm, overall width: 2,550 mm - Internal platform dimensions: L 6,200 x W 2,550 - Loading height: 910 mm - Coupling height: 700 to 950 mm - Steel corrugated floor, hot-dip galvanized - Rear angle of approx. 900 mm - Aluminum front and side panels, 400 mm high - Center and corner posts removable - Steel ramps with wooden covering, L 2,300 x 510 mm, laterally adjustable - Gas spring supports for single-person operation - Reflective strips according to ECE R048, white on the sides, red at the rear - Axle and frame painted in DB7350 Novagrau - 10-year warranty against rust - Errors and prior sales excepted! - More information and additional photos on our website: ... VAT can be shown, ABS, new, HSN 7951, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban) Gkodpfx Akozv Nrfeasb

Condition: used, Insulated whirlpool for separating hot trub from hot wort, with a top-fed discharge system. Equipped with a hop hopper. Additional title: hot trub separation and discharge with a hop dosing device Gsdpfxozvx A He Akajkb Cast wort capacity up to: 18000 l ; 15,500-16,000 liters for full-strength beer Material: stainless steel Features: insulation; hop dosing device; spent grain discharge

Condition: used, mileage: 6,56,928 km, power: 331 kW (450.03 HP), first registration: 05/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 41 m³, loading space length: 7,100 mm, loading space width: 2,460 mm, loading space height: 2,350 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Scania R 450 LB 6x2?4MSA VIN: 9224161 Chassis / Components: * Wheelbase: 4,600 mm / 1,350 mm * Leaf / Air Suspension * Lift axle // Steerable axle * Tires: 1. 385/55 R.22.5 2.+3. 315/70 R 22.5 * Remaining tread depth: Front approx. 20/30% Middle approx. 40/70% Rear approx. 80/30% * 1 x Aluminum tank 500 L * 1 x AD-Blue tank * 1 x Hydraulic tank * 1 x Bawer stainless steel storage box Cab: * CR 19 H Highline * 2 x Beds * Automatic climate control * Auxiliary heater * Refrigerator * Radio CD // CB radio * USB, AUX, BT * Navigation * Distance control Body: Gjdpfozv Akhjx Akajkb * HGE grain tipper * Standing platform * Roll tarp * Sideboards 800 mm * Folding center beam * Tarp installed inside * Body: 7,100 mm x 2,460 mm x 2,350 mm * Loading volume: approx. 40 m³ * Grain slide Engine / Transmission: * 12,742 ccm // 450 hp / 331 kW // EURO 6c * Opticruise / Automatic * Scania Retarder * Differential lock Weights: * Gross vehicle weight: 26,000 kg * Unladen weight: 11,680 kg * Payload: 14,320 kg Other: * German vehicle * 1 previous owner * MOT valid until 11 / 2025 ----2-axle HGE three-way tipper grain trailer TYPE: AK 18-3 VIN: 1HA0179 Registered: 17.02.2010 Chassis / Components: * 2 x SAF axles with disc brakes * Air suspension * Raising and lowering, front + rear * Tires: 385/55 R22.5 * Remaining tread depth: Front approx. 20% Rear approx. 40/50% * Aluminum rims * 2 x PVC storage boxes Body: * HGE grain three-way tipper * Standing platform with ladder on the right * Roll tarp * Loading volume: 7,100 mm x 2,460 mm x 2,350 mm * approx. 40 m³ * Sideboards 800 mm * Folding center beam * Tarp installed inside for bulk cargo * Grain slide Weights: * Gross vehicle weight: 18,000 kg * Payload: 13,770 kg * Unladen weight: 4,230 kg Other: * 1 previous owner * German vehicle * MOT valid until 10 / 2025 * New brake discs, new pads + 1 brake caliper front axle 08 / 2025 ---- New main inspections / safety checks or weight reductions / increases are possible upon request. We will gladly assist you in obtaining export / transfer license plates; a transfer of your purchased vehicles within the Federal Republic is also possible. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & spelling errors, changes, prior sales and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the areas of refurbishment and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day registrations / Export license plates We will gladly help you in obtaining export license plates / short-term license plates. Handling of customs formalities We will gladly help you.

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Gedoztpxmepfx Akaskb

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Gjdpfx Ajzump Ejkaokb Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process Gkjdoztwx Uepfx Akasb The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Year of construction: 2019, condition: used, 2-vessel brewhouse with stainless steel brewing vessels, mounted on a brewing block. The brewing block consists of the following components: 1. Mash and wort kettle, steam-heated (bottom heating zone with perforated weld + internal boiler), insulated, with a gross volume of 15 hl. The kettle is equipped with a continuously adjustable, top-driven agitator. The boiling vapours are extracted by a kettle fan into a vapour condensation pipe fitted with Lechler nozzles. The kettle also features a CIP spray head and a digital thermometer. 2. Mashing and lauter tun, insulated, with a continuously adjustable rake, inlets and outlets for wort and thick mash, spent grain flap, lauter floor (designed as a slotted screen floor), mash/wort pump and digital thermometer. Cleaning nozzles are fitted for internal cleaning and rinsing. For hot trub separation, the vessel also features a tangentially fed whirlpool nozzle. 3. Control cabinet with control panel 4. Various pipework, valves and sensors. The system is equipped with a two-stage plate heat exchanger for wort cooling at 1,000 l/h and a wort aeration device. In addition, a 20-hectolitre insulated stainless-steel tank with a heating jacket and a booster pump is available for use as a hot-water storage tank. Additional title: brewing block with stainless steel brew vessels Mash and wort pan net capacity approx.: 1000 L hot wort Mash and wort kettle inner diameter approx.: 1000 mm Mash and lauter tun inner diameter approx.: 1250 mm Height up to hood door approx.: 1 m Power: 4 kW Voltage: 400 V Frequency: 50 Hz Gkodpfx Akeztwz Aeaeb Operation / Control: “Braupilot” HMI control via touch screen Material: Stainless steel 1.4301 Base construction: Thanks to its modular design, the entire brewhouse is very compact and can be integrated individually and space-savingly into the guest area. Features: Mash and wort kettle with bottom heating and internal cooker, mash and lauter tun with whirlpool nozzle (combination vessel), hot water tank, wort cooling, wort areation, fittings, pumps, pipes

Condition: used, Year of construction: 1994, functionality: unexamined, nominal heat output: 120 kW (163.15 HP), Mawera boiler in dismantled condition, complete with control cabinet and material feed, located below the silo discharge point, including all fittings. Additionally, a new, unused material transport screw for the combustion chamber is available. Cash payment upon collection from the company premises – forklift available – individual parts may also be sold separately. Gedpfsztz Dnsx Akajkb We look forward to your interest.

Condition: excellent (used), functionality: fully functional, working width: 300 mm, brushing unit diameter: 240 mm, total length: 3,600 mm, total width: 1,000 mm, total height: 900 mm, height adjustment type: electric, overall weight: 400 kg, working height: 100 mm, workpiece height (max.): 100 mm, workpiece width (max.): 300 mm, workpiece length (max.): 3,600 mm, WOOD AGING BRUSHING MACHINE | 4 BRUSHES | 300 MM Sanding machine for aged wood JBS MACHINERY PROCHERA! Professional PROCHERA brushing/sanding machine designed for structuring, brushing, and aging wood. Gkedpfx Akjzxz T Tjasb The machine features 4 independent brushing units and a conveyor belt with adjustable feed speed. It is a robust industrial design intended for continuous processing of wooden components. This brushing machine is ideal for producing aged boards, wooden flooring, facades, countertops, decorative elements, paneling, and other products requiring the enhancement of the natural wood grain. TECHNICAL DATA - Manufacturer: PROCHERA - Type: brushing/sanding machine for wood structuring - Number of working units: 4 - Number of brushes: 4 - diameter 240mm - Maximum working width: 300 mm - Maximum height of workpiece: 100 mm - Feed speed: 0–23 m/min - Conveyor: belt type - Feed speed adjustment: stepless - Adjustment of working units: independent - Brush working direction: option for co-rotating/counter-rotating operation Gross price including VAT margin or 23% VAT invoice PROCHERA uses various types of brushes in these machines, allowing for both delicate and deep surface structuring. The first units can be equipped with metal brushes for more aggressive grain exposure, and subsequent units can use abrasive brushes for further processing and surface smoothing. The machine is primarily intended for: wood brushing, surface structuring, wood aging, exposing the natural grain pattern, surface preparation before oiling, wood preparation before waxing or varnishing, production of flooring boards, production of facade boards, production of countertops and decorative elements, processing of solid wood. Thanks to the four working units, it is possible to achieve multi-stage surface processing – from a strong opening of the wood structure to its further smoothing and finishing. WHY IS IT WORTH IT? This is a professional machine for companies involved in the production of aged boards, flooring, facades, countertops, and wooden decorative elements. Four working units allow for significantly greater flexibility compared to simple single-unit brushing machines. Adjustable feed allows for the selection of operating parameters for a specific material and desired effect. The machine is ready for further operation. Possibility to view the machine and test its operation after prior contact. JBS MACHINERY JBS MACHINERY GROUP Sp. z o.o. New and used woodworking machines Professional wood processing equipment Possibility to arrange transport in Poland and Europe. We invite you to contact us regarding price, additional photos, a video of the machine in operation, and details regarding transport.

Condition: used, Convey grain, pellets, biomass, or other dry bulk materials pneumatically using a heavy-duty industrial fan, when lightweight extraction fans are insufficient. This Reitz Umwelttechnik fan was used for pneumatic material conveying in our own facility and is fully functional. It has a flow rate of approximately 9,600-10,000 m³/h, direct drive, and a 700 kg welded steel construction mounted on a mobile, liftable base frame. Nameplate photos and technical documentation are available; inspections are welcome. Gjdpfx Akezx Ebzoaskb Only one unit is available – once sold, it’s gone. Pickup and transport slots are limited; loading this 700 kg unit must be scheduled. Best for: pneumatic conveying of dry bulk material, high-volume industrial ventilation, and process air where lightweight extraction fans are inadequate. Not suitable for: wet or sticky materials, air above 80°C, or applications requiring formal ATEX certification unless independently verified. What the specifications mean in practice: • 160-167 m³/min (~9,600-10,000 m³/h) - provides sufficient airflow to convey material through piping, not just extract dust. • 223-250 daPa total pressure increase - maintains material flow over distance and through bends. • Direct-driven 24.5/28 kW motor - eliminates the need to tension, align, or replace belts. • 700 kg welded steel housing, backward-curved impeller - designed for continuous industrial operation. • Mobile, liftable base frame - can be moved into position using a forklift or crane. • Max. 80°C, up to 3100 rpm - suitable for ambient and moderately warm process air. What you get: the complete fan unit with backward-curved impeller, motorenmaier 24.5/28 kW three-phase motor (IP55, 400/690V), and welded base frame, ready for connection. Note: the safety plate refers to explosion-protection instructions. If formal ATEX certification is relevant to your application, it should be independently verified. Technical data (from nameplate): Manufacturer: Reitz Umwelttechnik | Type: MSE 025-016030-00 | Serial/Year: 567856 / 2009 Volume flow: 160-167 m³/min (~9,600-10,000 m³/h) | Total pressure increase: 223-250 daPa | Shaft power: 8.7-11 kW Speed: 2915-2925 rpm (max. 3100) | Max. temperature: 80°C Drive motor: motorenmaier gmbh, Type 7AA160L-02V, 24.5/28kW, 2-pole, IP55, 400/690V | Weight: 700 kg Condition: Used, functional, previously used for pneumatic material conveying. Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement). Buy with confidence: manufactured in 2009 (serial 567856) by a reputable German manufacturer, used in our own facility, fully functional, and can be tested before pickup. Nameplate photos and technical documentation are available; in-person inspections are possible in Kerns OW by appointment. You can verify the identity, condition, and operation before making a purchase. Why buy now: this is a single, used machine, not stock – once sold, this specific configuration is no longer available; a 700 kg fan on a base frame is not an item we typically restock. First-buyer bonus: free loading with our forklift at no extra cost. Valid until September 9, 2026, or until sold. Action: please provide your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031812, empty load weight: 6,115 kg, maximum load weight: 28,885 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 10/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 40 %, ground clearance: 310 mm, color: red, Please note: the images are archive photos! The vehicle may currently be in use. #Chassis – haulage semi-trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Slightly tapered outer frame, new design with "Load-Lock-Profil" for lashing strap attachment 24 t 2-speed landing legs, single-side operation, with half-round foot and straight mounting plate, with thrust compensation Pull-out ladder at the rear "D-Lock" door retainer for I-Lock closure 2 wheel chocks with holder Pallet box (capacity: 24 Euro-pallets) "Heavy Blocker" rear underrun protection, transverse + lateral roller-type impact buffer 1 plastic tool box, w=600 / h=425 / d=460 mm Gjdpfxezxz R Ss Akaokb Storage compartment for 32 slat boards under the loading floor Pallet stop on both sides, approx. 15-20 mm high, bolted design #Axles & suspension BPW disc brake axles with 430 mm disc diameter Laser-aligned axles/chassis – reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, additionally operable electrically from the truck, including forced lowering and pull-away aid #Braking system 2-line air braking system Colour-coded pipework for easy servicing Spring-loaded parking brake 2 anti-mismatch coupling heads at the front 24V EBS, electronic braking system with EBS socket at the front with lift & lower valve + auto-reset function Vehicle stability system #Wheels and tyres 385/65 R22.5" Polished aluminium rims, Alcoa Dura-Bright #Electrics 24V, LED multi-chamber lights, yellow LED side marker lights, number plate light 2 white LED front position lights 2 white/red LED outline marker lights at the rear 1 x 15-pin socket at the front LED work lights on both sides 2 additional LED work lights at the rear #Floor Plywood flooring approx. 30 mm thick, on longitudinal bearers for high point load capacity, for forklift axle loads up to max. 7100 kg Steel sheet covering fitted at the rear over approx. 300 mm Premium floor sealing – floor sealed all around #Front wall / front corner posts 2580 mm high, steel corner posts of box-section design, release mechanism for the side curtain at the front wall Crash-Blocker, steel impact protection on the lower inside, approx. 140 mm high #Centre posts 3 pairs of sliding posts, movable along the entire length 3 pairs of post positions #Slat boards Aluminium V-profile slat boards #Rear wall / rear corner posts Rear corner posts, steel, up to roof edge, curtain attachment with round tube and curtain tensioning ratchet Rear barn doors, 2-leaf Fliegl "I-Lock" integrated door lock, awarded the "iF Design Award" #Roof "Fliegl-Blitz-Verdeck" Sliding roof, rear end bow foldable, roof sheet slides from rear to front, L-shaped roof rail as used in the automotive industry Roof non-elastic, minimal deflection of the roof rail Anti-Ice System, with 1 central hose, automatic forced venting via the brake light Optimum rain gutter at the rear #Country of registration / plates Type approval per EC 2007/46 Fliegl manufacturer's certificate for body strength per EN 12642 XL Fliegl manufacturer's certificate for load securing per VDI 2700 sheet 12 ff. Warning board per ECE-70 Please note: archive photos!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 1,600 kg, Electropneumatically controlled, segmented pressure shoes with a 30 mm segment width ensure a consistent grinding pressure across the entire workpiece width and can be further adjusted via the touch panel control. For final finishing: Smartflex lamellar disc for cross-grain sanding and for grinding radii. Technical data: Working width: max. 230 mm Workpiece thickness: 10 to 230 mm Year of manufacture: 2025 Weight: 1,600 kg 400 V, 50 Hz, 32 A, fuse rating 35 A Gksdezxnatepfx Akajb Directly from the manufacturer, inspection and sample processing possible at any time. Ex works Homberg-Caßdorf, price net plus VAT.

Condition: used, functionality: unexamined, Year of construction: 1963, Used double-shaft hammer crusher KRUPP DHB 1604, feed opening approx. 1600 x 1480 mm, capacity up to 400-500 t/h, final grain size 0-30 mm, max. feed size 1000 x 800 x 500 mm. Particularly suitable for the cement industry, for processing moist materials such as limestone, clay, marl. Weight approx. 60 t. Gsdpfx Aksxcxrzeaokb