Used Pressing Lines for sale (20,266)

Year of construction: 2013, condition: used, - Press table: 3000 x 1400 mm Membrane press Manufacturer: Columbus Kjdezuz A Tepfx Adhjna Type: Multimat Year of manufacture: 2013 Technical data - Press table: 3000 x 1400 mm Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2007, Heating plate press Manufacturer: OTT Kedjzuzxnspfx Adhena Type: Solid 16-32 Year of manufacture: 2007 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, Continuous press Manufacturer: Ligmatech Knsdpfx Adszuzxbehja Type: Optimat MDE 10 Year of manufacture: 2001 Technical data Body dimensions - Length: 300 - 2500 mm - Height: 300 - 1300 mm - Depth: 120 - 600/800 mm - Pressing forces are generated electrically, both horizontally and vertically, and can be varied independently - Pressing forces are applied vertically via a pressure plate and horizontally via 3 pressure jaws each - Pressing takes place centered and on a zero line on the operator side Positioning of the pressure jaws: - Top pressure jaw with forced guidance on the top press, optionally lowerable via cylinder - Middle pressure jaw freely programmable and motor-driven - Bottom pressure jaw freely programmable and movable via a common drive with the middle pressure jaw Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Knjdozuzw Dopfx Adhea Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1996, Continuous press Manufacturer: OTT Kedpfxjzuzwwe Adhona Type: 300-K-D0 Year of manufacture: 1996 Technical data Plate dimensions: 2550 x 1350 mm Hot water heating 6 pressure cylinders Total pressing force: 135 t Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2007, Lamination press Manufacturer: Dimter Type: PROFIPRESS L2500 Year of manufacture: 2007 Technical data Wood dimensions to be processed Wood width, panels: 30 - 150 mm Wood thickness: 11 - 60 mm Wood inlet length: 800 - 2500 mm Panel widths, variable: max. 1300 mm Kjdpfxjzuzwqs Adhona Specific pressing pressure for cross-sections of 2500 x 60 mm: up to 1.6 N/mm2 The pressing surface per press cycle must not be smaller than 100 cm2 Filling width of the press per cycle: min. 650 mm / max. 1300 mm Max. filling area of the press per cycle: 3.25 m2 (The max. usable press width depends on the widths of the individual lamellas.) Wood type Softwood/hardwood Press without options Electrical connection, press: 7 kW Electrical connection, 40 kW generator: 56 kW Operating voltage: approx. 400 Volt / 50 Hz (C/s) Collection table extended to 3700 x 1300 mm, with stainless steel wood support Motor-driven multi-function slider Lamination press Profipress L 2500 Press bed area approx. 2500 x 1300 mm Sturdy base frame with lower press table made of stainless steel as a grounding electrode Quick-change stop guide sets for panel thicknesses of 19 - 40 mm, which can be hydraulically adjusted to the current filling width Hydraulic special pressure elements ensure uniform pressure distribution over the entire joint length and compensate for tolerances In multi-lane operation, filling widths may vary by a maximum of 15 mm Upper pressure plate with hydraulic drive generates high vertical pressing pressure for minimal displacement Integrated hydraulic unit for generating pressing force and driving the hydraulic motors Control cabinet and control panel Protective cladding Additional individual pressure elements from above Automatic gluing station with precision gluing head Infeed for different widths Camera Washing and rinsing device for gluing head Modem incl. software for online connection Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2019, Corpus press Manufacturer: LINYI JIANZHONG WOOD MACHINERY Type: JJZ-CP Year of manufacture: 2019 The JJZ-CP press is suitable for the production of plywood, doors, and MDF panel joints. The feeding and removal of the glued elements are carried out automatically via powered roller conveyors. Technical data - Max. pressure 500 t (adjustable) - Max. filling height 1300 mm - Min. filling height 900 mm - Max. filling size 1300 x 2500 mm - Press dimensions 3600 x 1370 x 4500 mm - Press placement approx. 500 mm below floor level - Feeding table 2000 x 1960 mm - Receiving table 2350 x 2500 mm - Max. power 13.2 kW - Weight 12000 kg - CE marking - Capacity: 6 batches per hour 2 corpus presses are available for sale. Knsdpfx Adszuzwkjhea Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1998, Continuous body press Manufacturer: LIGMATECH TYPE: MPP 15 Year of manufacture: 1998 The MPP 15 is a flexible press for batch-related production without setup times. The MPP 15 can be used individually or in various combinations in an assembly line. The pressing forces are applied pneumatically. The separately adjustable vertical and horizontal pressure allows for pressing both horizontal and vertical bodies. The vertical forces are transmitted through a plate, while the horizontal forces act on the body via press cheeks. The position of the center press cheeks can be adjusted using adjustable stops, allowing for different heights of bottoms and sides. During the infeed process, the body is measured photoelectrically, which automatically positions the horizontal pressure bar. Technical data: Body dimensions: Length: min. 300 mm / max. 2300 mm Height: min. 300 mm / max. 1220 mm Depth: max. 600/800/1000 mm (depending on the press type) Pressing pressure: vertical max. 17 kN horizontal max. 16 kN Working height: 500 mm Transport speed: min. 8 m/min. / max. 37 m/min. Pressing time: selectable up to 999 s Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC (according to VDE) Required air pressure: 5...8 bar Air consumption: 120 NL/cycle Total connected load: 3 kW Weight: approx. 4 tons Required room height: 3000 mm Extended infeed belt as a staging area Kodpozuzv Tjfx Adhsna Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, Corrugated board press Manufacturer: Hüttenhölscher Year of manufacture: 2000 Kedpozuzvmefx Adhena Technical data Voltage: 400 V Current: 32 A Frequency: 50 Hz Compressed air: 6 bar Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, Painting system Manufacturer: Cefla Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: - Infeed conveyor with light barriers Knsdpfszuzt Eox Adhja - Dust removal brush machine - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts - Outfeed conveyor from the drying oven Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances - Dust extraction system for the infeed table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, - SCM DMC System / E83 2000 sanding machine - Superfici Transporto conveying system - 2x Superfici Valiorta F1 B painting machines - 2x Superfici UV drying units Painting line Manufacturer: SCM/Superfici Painting line consisting of: Kodpfx Aszuzkksdhjna Sanding machine Manufacturer: SCM Type: DMC System / E83 2000 Year of manufacture: 2022 Conveying system Manufacturer: Superfici Type: Transporto Year of manufacture: 2022 2x painting machines Manufacturer: Superfici Type: Valiorta F1 B Year of manufacture: 2022 2x UV drying units Manufacturer: Superfici Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: used, Door panel postforming line Note: The line began series production in 2022; at this point, all machines were technically synchronized and, if necessary, overhauled. Door panel postforming line consisting of: Portal loading system Manufacturer: Kraft Year of manufacture: 2019 Technical data - with vacuum lifter - 2 infeed roller conveyors - one transport roller conveyor for further transport Wide belt sanding machine Manufacturer: Costa Type: KK7 CT CT 1350 Year of manufacture: 2018 consisting of: Wide belt sanding machine, sanding from below Technical data - contact roller - electronic shoe sanding unit - cleaning brush - intermediate transport belt, length approx. 3000 mm Wide belt sanding machine, sanding from above Technical data - identical equipment Complete formatting, laminating and postforming line consisting of: Roller conveyor system Manufacturer: Kraft Year of manufacture: 2019 Technical data - 3 individual elements - centering station Double end profiler Manufacturer: IMA Type: FBA/II/740/A Year of manufacture: 2018 Technical data - equipped with infeed conveyor and aligning station - saw unit below - trimming unit - edge trimming unit - prism milling cutter - joint milling cutter - cross edge milling unit - 3 profile milling units - brushes Laminating line consisting of: Infeed conveyor Kedpfx Adezuziyohona Manufacturer: Kraft Year of manufacture: 2019 Glue application machine Manufacturer: Bürkle Type: DAK1300 Year of manufacture: 1992 Technical data - mechanically overhauled in 2018 - control system completely overhauled in 2022 - with infeed table, manufacturer Kraft - steel platform with stairs and various pumps - glue melting unit GWK Eco 03A Infeed table for laminating line Manufacturer: Kraft Year of manufacture: 2019 Laminating line Manufacturer: Bürkle Type: EKMH 1300 Year of manufacture: 1998 Technical data - new Siemens Simatic KMG Touch control system - Bürkle GLK press calender - incl. film holder and saw for overhang - working width 1300 mm - 2 temperature control units GWK - column swivel crane for loading paper rolls - extraction conveyor Postforming line Manufacturer: Homag Technical data - infeed table - with 2 saw units, horizontal and vertical - intermediate buffer with 4 levels - infeed to the postforming machine - 2 identically constructed processing sides with glue application - PU pre-melting unit Nordson / VersaBlue, year 2020 and 2004 - pressure zone with revolving magazine for various profiles - various milling units and flap brushes - 2 cooling units BEKO Bekoblizz LC, year 2020 Belt conveyor with inspection system - swivel arm with vacuum suction cup - inspection station for optical inspection of the workpiece Portal destacking system Manufacturer: Kraft Technical data - with vacuum portal and 3 destacking stations Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: used, Paint line Paint line consisting of: Vacuum loading system Technical data - 2-strand - Roller width: approx. 1000 mm Wide belt sanding machine Manufacturer: Büftering Type: Classic 213EB Year of manufacture: 2000 Technical data - Working width: max. 1350 mm - Vacuum conveyor belt - Electronic sanding pad Belt conveyor system Manufacturer: Belting Year of manufacture: 2019 Technical data - Dimensions: 6100 x 1000 mm Dust extraction system Manufacturer: Heesemann Type: EA2 Year of manufacture: 1990 Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 Throughfeed drying tunnel Manufacturer: Bürkle Technical data - with UV lamp Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 UV drying tunnel Manufacturer: Elmag Type: Ti166-35+2iVM1-65 Technical data - equipped with 2 UV lamps Wide belt sanding machine Manufacturer: Büftering Type: Optimat SCO 313QHQ Year of manufacture: 2007 Technical data - Working width: approx. 1350 mm - Machine equipped with 3 sanding units (cross-longitudinal-cross) 4-tier intermediate buffer Technical data - Tier size: 3000 x 1350 mm Dust extraction system Manufacturer: Cefla Type: TN3500/TT Year of manufacture: 2004 Paint robot Manufacturer: Cefla Type: Spraybotic MD Year of manufacture: 2004 Technical data - Throughput width: approx. 1350 mm - Automatic spray arm with 4 spray nozzles - Pump station with 5 Graco paint pumps Intermediate transport Knjdpfx Adszuzhiohsa Manufacturer: Cefla Type: TN3591/TT Year of manufacture: 2004 Throughfeed multi-level dryer Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 UV drying tunnel Manufacturer: Venjakob Year of manufacture: 2008 Technical data - Infeed conveyor belt - 4 UV drying lamps (1 below, 3 above) - mounted on 2 belt conveyors Venjakob Belt conveyor Manufacturer: Cefla Type: TN3500/E Year of manufacture: 2004 Technical data - Conveyor length approx. 3500 mm Belt conveyor Manufacturer: Cefla Type: TT/1V/3750 Year of manufacture: 2004 Technical data - Conveyor length approx. 3750 mm Roller conveyor Technical data - Roller width: 1700 mm - Conveyor length: 3750 mm Edge sanding and brushing machine Technical data - with alignment table - 3 sanding units for cross and longitudinal processing of door leaf edges Belt conveyor Manufacturer: Belting Technical data - Conveyor length: approx. 4000 mm - Belt width: approx. 1170 mm Turning system for door leaves Manufacturer: Kraft Year of manufacture: 2018 Individual components of the system can be purchased separately as follows: Vacuum loading system €10,000.00 Büftering Classic 213EB wide belt sanding machine €12,000.00 Belting belt conveyor €3,500.00 Heesemann EA2 dust extraction system €2,500.00 Bürkle DAL1-1300 paint application machine No. 1 €7,500.00 Bürkle throughfeed drying tunnel €9,000.00 Bürkle DAL1-1300 paint application machine No. 2 €7,500.00 Elmag UV drying tunnel €13,000.00 Büftering Optimat SCO 313QHQ €15,000.00 4-tier intermediate buffer €10,000.00 Cefla TN3500/TT dust extractor €4,000.00 Cefla Spraybotic MD incl. pump station €50,000.00 Cefla TN3591/TT intermediate transport €4,000.00 Cefla VN 2000/3/7500/300-24 multi-level dryer €20,000.00 Venjakob UV drying tunnel €13,000.00 Cefla conveyor belt TN3500/E €2,500.00 Cefla conveyor belt TT/1V/3750 €2,500.00 Roller conveyor €2,000.00 Edge sanding and brushing machine €5,500.00 Belting conveyor belt €2,000.00 Kraft turning system for door leaves (2018) €20,000.00 Note: T

Condition: used, Painting line Manufacturer: Giardina, Rich Fruit, Neomec, Kremlin The painting system is designed for painting elements made of MDF or HDF boards. The spray booths have two circuits, one for clear coats and one for colored paints. The system is designed for water-based UV coatings. The system consists of the following elements: Kodpfx Aozuzg Sodhona Infeed Manufacturer: Neomec Conveyor table with a cleaner Spray painting machine Manufacturer: Giardina Type: Dualtech 416 Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Turntable Conveyor table Conveyor table with a cleaner Spray painting machine Manufacturer: Rich Fruit Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Each booth has two circuits, one for paint and one for coatings, driven by KREMLIN pumps and spray guns from the same company. Length of the machine line: 92 m Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, - RBO vacuum feeder – Tornado SC 1300 Knsdpfx Aezuzg Eodhoa - HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) - HEESEMANN – Dust removal machine - Plus additional dust removal - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - HACKEMACK slit nozzle dryer - RBO – Vacuum stacker Oil application line Year of construction: 2001 Oil application line consisting of: RBO vacuum feeder – Tornado SC 1300 HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) HEESEMANN – Dust removal machine Plus additional dust removal BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above HACKEMACK slit nozzle dryer RBO – Vacuum stacker with new Siemens control system in 2024 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1998, - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Door pressing system Manufacturer: Wild Year of manufacture: 1998 For door dimensions: - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Consisting of the following sections: 1. Continuous door panel gluing with frame assembly station / 2. Pressing line with hardboard facing station Section 1 consists of: - Gantry loading system - Angle transfer with longitudinal and cross saws - Loading and feeding of the longitudinal and transverse frame parts from magazines - Longitudinal cutting station for the longitudinal frame parts - Connecting station of the frame parts with the door panel core. With clamping devices - Conveyor belt angle transfer with shuttle transfer of the door panel cores onto the glued hardboard Section 2 consists of: - Loading of the hardboard - Brush cleaning machine - Hardener application machine from below - Glue application machine from below - Roller conveyor - Angle transfer for the lower hardboard Knodpezuzgrofx Adhja - Vacuum reversing device for the upper hardboard - Automatic facing station for hardboard and door panel cores - 2 door presses, each with 2 x 4 pressing stations, arranged parallel to each other - Both presses are loaded at the infeed with 1 shuttle loading basket - Both presses are unloaded at the outfeed with 1 shuttle unloading basket - Angle transfer to the infeed into a hedgehog buffer - Angle transfer at the outfeed of the hedgehog buffer and feeding to the stacking station - One-sided vacuum stacking with protective plate space Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Knodpfx Ajzuzfbsdhea Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2011, 479 USED Bun, pretzel line W&P MUS. EXTERNAL DIMENSIONS (in cm): Divider with feeder: - W: 130 cm - L: 200 cm - H: 265 cm Knedpfx Aezqvvgodhsa Pre-proofer: - W: 150 cm - L: 170 cm - H: 180 cm Extender: - W: 78 cm - L: 347 cm - H: 155 cm TECHNICAL DATA: - year of production: 2011 - Weight: up to 110 g - Power supply: 400 V 50 Hz EQUIPMENT: - Meyma HK602 VL bowl tipper (year of production: 2020) - Multimatic 6-row divider-rounder - Intermediate hopper - Additional rounding drums - Pre-proofer - Pretzel extender Grubelnik - table with belt The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 1998, Window manufacturing system Manufacturer: Weinig Type: Unicontrol 10-5 Year of manufacture: 1998 Technical data Working width: 40 - 220 mm Working height, longitudinal machining: 40 - 100 mm Working height, transverse machining: 40 - 100 mm (80 mm counterpiece height) Workpiece length, longitudinal machining: min. 220 mm + 2 x tenon length Workpiece length, transverse machining: min. 275 mm + 1 x tenon length at 320 mm tool diameter Feed (transverse machining) Motor power: 0.3 kW Feed speed: 3 - 25 m/min Workpiece clamping: by means of 2 clamping jaws Length stop: with scale and magnifying glass for frame or sash outer dimensions Counterpiece: pneumatically controlled - 4 positions - (not for studio windows) up to a wood height of max. 80 mm Double part package: For single or double part feeding. With transverse separation and retention system 1. Wood (lying against the stop) Wood width: 55 - 90 mm 2. Wood Wood width: 130 mm Feed (longitudinal machining) Motor power: 2.2 kW Feed speed: 4 - 18 m/min (continuously variable via frequency converter) Feed roller spacing: 100/120 mm Feed roller width: 30/50 mm Feed roller diameter: 95 mm Machining units Cut-off saw Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 2800 rpm Tool circle diameter: max. 400 mm Adjustment, axial: pneumatically controlled against a 4-position turret 1. Tenon and mortise spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 3250 rpm Tool circle diameter: max. 320 mm Tool clamping length: 320 mm Adjustment, axial: 240 mm Number of tools: 4 x 80 mm Axial adjustment: hydraulic 1. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 Axial adjustment: hydraulic 2. Profiling spindle Motor power: 11 kW Ksdpfezuyxgox Adhona Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 mm Axial adjustment: hydraulic 2 Mechanical spindle brake for profiling spindle 3 Mechanical spindle brake for cut-off saw and profiling and sawing units Profiling milling unit (horizontal, top) before the last profiling spindle radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 130 mm Tool clamping length: 40 mm Adjustment, axial: 52 mm Adjustment, radial: 125 mm Profiling milling unit (vertical, right) at the end of the machine radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 210 mm Tool clamping length: 160 mm Adjustment, axial: 90 mm Adjustment, radial: 100 mm Length, tenon and mortise spindle with 640 mm tool clamping length (instead of 320 mm spindle) Motor power: 15 kW Spindle speed: 2925 rpm Number of tool positions: 8 x 80 mm Adjustment, axial: 560 mm Laser alignment light for cut-off saw for detecting the section Studio window configuration Swiveling length stop +/- 60 with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for angled part production Limitation: Wood thickness max. 120 mm At -60 position: Workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profili

Condition: used, Year of construction: 1997, - Feeding and transport - Milling machine combination with glue application - Transfer station - Infeed station - End face press with stacking Dovetail tenon machine Manufacturer: Grecon Year of manufacture: 1997 Space requirements for operation and maintenance Length 18500 mm Width 6500 mm Height 2000 mm Weight and floor load Total weight 10500 Kg Floor load dyn. 25 N/cm² Wood data Wood type: Softwood or hardwood Length (min/max) 150 / 2000 mm Width (min/max) 50 / 205 mm Height (min/max) 35 / 50 mm Output length (min/max) 3000 / 6000 mm Machine components Feeding and transport Conveyor belt Type: FB 600 / 1000 Powered conveyor belt with fixed and foldable side guides and a retractable stop for aligning the packages. Technical data Length 1100 mm Width 950 mm Height 1000 mm Power consumption 1.1 kW Feed speed 75 m/min Milling machine Turbo milling combination Type: FDL-F-205/600/500 Two combined milling machines in a heavy-duty design with adjustable tables as workpiece supports, guided by a stable combined ball bearing and roller guide. Each milling machine is equipped with a clamping station, the trimming unit, and the milling unit. Either the second milling machine or both milling machines are equipped with a glue application system. The milling machines can be equipped with a scoring saw. Belts between the milling machines minimize package transport times, thus achieving a fast throughput. A pneumatic vibrating device in the clamping station ensures even alignment of the wood. Horizontal and vertical pressure devices clamp the package. The trimming unit is used to cut a reference edge on the workpiece. This reference edge determines the length of the respective dovetail tenon profile and can be adjusted. The dovetailing is carried out by the milling unit, followed by glue application via a side jet or roller applicator. Technical data Power consumption 63 kW Compressed air consumption 350 NL/min Exhaust diameter 2 x 250 mm Ksdpfjzuyw Asx Adhjna Exhaust volume 10600 m³/h Drive Motor 1: Table feed, milling table Manufacturer: SEW Power consumption 1.5 kW Speed 71 rpm Motor 2: Belt drive Manufacturer: SEW Power consumption 1.1 kW Speed 227 rpm Motor 3: Trimming unit motor Manufacturer: Walter Power consumption 5.5 kW Speed 2880 rpm Motor 4: Milling spindle motor Manufacturer: Behnke Power consumption 22.0 kW Speed 3000 rpm Transfer Transfer station Type: ÜL WB 600/1000 Transfer station designed in a robust welded construction with an infeed belt, alignment stop, cross-feed unit, turning device with turning brush, and an outfeed belt, as well as adjustment devices for optimal adaptation to different wood dimensions. The packages of workpieces, which have been milled, are transferred from the milling table of the dovetail tenon milling machine to the conveyor belt of the transfer station and aligned flush with a stop. The aligned wood package is moved transversely to the infeed direction into the area of the turning device by the cross-feed unit. The separation of the wood package is carried out either directly onto the outfeed belt or by turning it 90 degrees and aligning it with a fixed edge. The discharge edge can be adjusted to the wood dimension. The separated wood is transported to the infeed station via a fast-moving conveyor belt. Technical data Power consumption 2.5 kW Compressed air volume 12 m³/h Feed speed 75 m/min Infeed station Infeed station Type: EKK 205 Infeed station with a side chain guide for transporting the separated pieces of wood.

Condition: used, Factory-reconditioned edge processing line for 3 mm edges Manufacturer: IMA Type: Combima Consisting of: Machine 1: Used edge processing machine from IMA, type COMBIMA Factory-reconditioned with a 12-month warranty Kodpfxezuyqvs Adhsna - Working width max. 1,500 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Milling unit with 1 motor, 4.4 kW, 100 Hz - Hot melt adhesive unit with 2-roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 2 motors, 1.5 kW - Chamfering unit with 2 motors, 0.6 kW - Profile drawing blade unit - Straight drawing blade unit - Edge sanding/buffing unit - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB - 1 used rotating device for changing from longitudinal to transverse - Factory-reconditioned with a 12-month warranty - Max. panel length 2,500 mm, max. panel width 1,500 mm Machine 2: Used edge processing machine, manufacturer: IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 3,000 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Protective milling unit with motor 3.3 kW, 100 Hz - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Enclosed gluing unit with double roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 1 upper and 1 lower motor, 0.4 kW - Chamfering unit with 2 motors, 0.4 kW - Copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear lower workpiece profiles, copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear upper workpiece profiles, profile drawing blade unit - Straight drawing blade - Buffing unit - Center support - Pull-out rollers 800 mm - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB Delivery time after order placement approx. 4-6 months (depending on current workload and scope of desired work). Individual machine configurations are possible according to customer requirements, as the machines are disassembled down to the base frames and reassembled after replacing all wear parts.

Condition: used, Year of construction: 1996, - Double-sided IMA COMBIMA for longitudinal machining - Swiveling device Kodpfjzuypxsx Adhona - Double-sided IMA COMBIMA for transverse machining 1 used edge processing line IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Year of manufacture: 1996 Consisting of: - Double-sided IMA COMBIMA for longitudinal machining: Double edging unit 2 x milling units Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Cutting unit Flush trimming 2 x fine milling units Profile trimming blade Surface trimming blade Buffing unit Smoothing unit - Swiveling device from longitudinal to transverse - Double-sided IMA COMBIMA for transverse machining Protective milling Double edging Grooving milling unit Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Capping at the top pressure (retrofit to current model) Flush trimming Fine milling 2 x MFA milling units Grooving milling unit Profile trimming blade Surface trimming blade Copy buffing (4 motors) Buffing (2 motors) Smoothing unit Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Knsdpfszuynhox Adhja Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, operating hours: 1,00,000 h, input voltage: 4,000 V, type of input current: three-phase, total length: 65,000 mm, overall weight: 40,000 kg, controller model: partially manual, Equipment: chip conveyor, corrugation cardboard line, C,B,E flute 1530mm units,the bobbin feet of the machine 4/3single 1 double ,glue transfer unit, heating tunel, side cutting and cut off unit, Included the gaz and air stations, glue preparing unit. all are parts of the production line. Ksdpfx Adowycrcshsna

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 2,420 mm, total length: 6,840 mm, total height: 2,600 mm, overall weight: 15,000 kg, type of input current: three-phase, filling opening length: 2,000 mm, filling opening width: 1,980 mm, input voltage: 400 V, empty load weight: 4,950 kg, DGUV certified until: 08/2027, Presto HGS20R 2 units available Container for skip loader trucks 20 cubic meter usable volume Technically refurbished Repainted in desired RAL color Knedpjzt Nirsfx Adhea Side hook connection Discharge door hinged at the top