Used Radial Fan-Blower for sale (5,067)

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan, low pressure radial fan -Manufacturer: Dietz, low-pressure radial fan type DN 14 Kodeuncwxjpfx Adledt -Motor: Dietz 0.45 kW 2880 rpm -Volume flow: 19 m³/min -Connection: inlet Ø 130 mm -Connection: Output 110 x 110 mm -Protection class: IP56 -Dimensions: 380/300/H295 mm -Weight: 15.4 kg

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. Kodjzu Aibopfx Adlodt It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, rotational speed (min.): 2,947 rpm, input voltage: 690 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, Product Description: ABB M3HP 180MLB (2019) ⚙️ Device Type: Three-phase, low-voltage squirrel cage induction motor, ABB M3HP series – designed for industrial applications requiring high reliability, energy efficiency, and long service life. 🔍 Construction and Features: - Model: M3HP 180MLB - Housing: High-strength cast iron, mechanically durable and corrosion resistant - Cooling: IC411 (external self-powered axial fan, integrated under protective cover) - Protection rating: IP55 – protection against dust and water jets from any direction - Mounting configuration: B3 – foot-mounted (other variants, e.g., B5, available within the same motor family) - Bearings: High-quality ball bearings, suitable for continuous operation - Lubrication: Relubrication possible (grease nipples on housing available in many versions) ⚡ Electrical Specifications: Parameter Typical Value (for 4-pole version) Rated power 22 kW Supply voltage 400 / 690 V (Y/Δ) Frequency 50 Hz (optionally 60 Hz in alternative configuration) Number of poles 4 (approx. 1500 rpm at 50 Hz) Rated current approx. 40–42 A at 400 V (exact value per nameplate) Efficiency class IE2 or IE3 (depending on factory version) Insulation class F (winding temperatures up to 155°C permitted), utilizing class B 📏 Mechanical Dimensions: Parameter Value (typical IEC data) Shaft height 180 mm Shaft diameter 48 mm Shaft length 110 mm Mounting holes spacing (feet) 279 x 279 mm Overall length approx. 580 mm (incl. fan and cover) Weight approx. 180–210 kg (depending on execution) ⚠️ Dimensions may vary slightly depending on the version – for details refer to ABB documentation (IEC 60072-1 compliant). 🏭 Application: The ABB M3HP 180MLB motor is widely used in industry, particularly in: - Pump stations and hydraulic systems (centrifugal, deep-well, and circulation pumps) - Fans, blowers, HVAC systems - Belt conveyors, production lines - Mixers, mills, for both intermittent and continuous duty - Specialized machinery in food, wood, and chemical industries ✅ Key Advantages of the M3HP 180MLB: - High reliability – proven ABB design, robust cast iron housing, resistant to harsh environments - Energy efficiency – compliant with IE2 or IE3 standards (lower power consumption) - Easy integration – IEC standard compliance, universal dimensions, wide range of accessories - Customizable – options with PTC sensors, encoders, brake, various mounting configurations Kodpfx Adow Ifb Uelsdt - Long service life – relubrication capability, premium grade bearings - Quiet operation – low noise level, meets environmental standards 📦 Condition and Storage: - Year of manufacture: 2019 - Factory-new, unused motor, stored under controlled conditions (dry, vibration-free, in accordance with ABB guidelines) Price is per unit – 2 units available. Immediate delivery.

Condition: new, functionality: fully functional, Year of construction: 2026, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK! Kdodpfx Adjx Agpzjljt

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h Kdsdeua Eu Nopfx Adlet

Condition: used, Thermal system, fan heaters, heating elements, radial heaters -Manufacturer: Karl Klein, fan with heater: HVL 150 -Fan: Type ENG 3-6 K/S30 -Power: 100 W / 7.8 m³/min -Heating attachment: Type 8.0104 1500 W -Inlet: Ø 170 mm -Outlet: Ø 55 mm Kjdpfx Aorkp Nxedledt -Quantity: 3x blowers available -Price per piece -Dimensions: 280/250/H270 mm -Weight: 6.2 kg/piece

Year of construction: 1996, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Piller, double radial fan. -Type: 2 M 10 1800 -Engine power: 15 kW / 2965 rpm -Volume flow: 0.27 m³/s -Connection input: Ø 160 mm -Connection: Ø 100 mm -Protection class: IP 44 -Dimensions: 900/1150/H1275 mm Kodpfx Adsvam Hlslsdt -Weight: 367 kg

Condition: good (used), High-pressure centrifugal fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Fan and plate: made of stainless steel -Motor power: 2.2 kW -Speed: 1440 rpm -Diameter fan: 550 mm -Quantity: 3 pieces available -Price per piece Kdodpfx Adsf T Snvslot -Dimensions: 570/625/H625 mm -Weight: 74kg/piece

Condition: used, Radial fan, chip extraction fan, fan, extraction, chip blower, fan wheel, blower, fan -Fan wheel: for extractor fan Kjdpfeurn Siex Adlsdt -Connection input: Ø 280 mm -Hole: Ø 12 x 33 mm -Dimensions: Ø 340 x 185 mm -Weight: 1.3 kg

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Manufacturer: Karl Klein, blower radial fan type DNG 6-18 L Kdedpfsuqf Ufex Adljt -Engine power: 0.155 kW -Speed: 1400 rpm -Volume output: 18.5 m³/min -Fan wheel: Ø 160 x 80 mm -Connection input: Ø 145 mm -Connection output: 120 x 110 mm -Number: 3x blowers available -Price: per piece -Dimensions: 370/340/H320 mm -Weight: 8.1 kg/piece

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type DG 63 b -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h -Connection: inlet Ø 58 mm Kedpfx Aot Rbhzedledt -Connection: output Ø 75 mm -Dimensions: 380/250/H360 mm -Weight: 9.2 kg

Year of construction: 2015, condition: ready for operation (used), 1) Eccentric screw pump Johstadt AFJ 70.1 S, year of manufacture: 2011. 2) Eccentric screw pump Johstadt FJ 70.1 S, year of manufacture: 2015. 3) Eccentric screw pump Stöber/HEW/Netzsch DC30-2061-200-U/EEXF100L/U/NE40B, year of manufacture: 1989. 4) Centrifugal pump Stork CN32-200G1S3L1, year of manufacture: 1997. 5) Centrifugal pump Siemens&Hinsch m.b.H/Loher&Söhne AKHK6101/eA132 MA-U, year of manufacture: 1970. 6) Centrifugal pump with electric motor EMK/SPX EC2-HS160M1-2/CC40-200 R6S2L2. 7) Electric motor Siemens 1LA2 130-2CA60, year of manufacture: 1997. 8) Electric motor VEM. VEM electric motor. 9) Electric motor with gearbox Nord SK 132 S/4-2 TF, SK 33-132S/4-2 TF, year of manufacture: 2011. 10) Blower Gebhardt Ventilatoren KEM 61-0200-4 X-14-11. 11) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 Dex 80L/4K, year of manufacture: 2015. 12) Side channel pump SERO/VEM SVM 111 K,V,60-2,32 kPER 80G4 FDS, year of manufacture: 2013. 13) Electric motor with gearbox Getriebebau Nord SK 132 S/4 TF, SK 472-132 S/4 TF. 14) Electric motor with gearbox Getriebebau Nord SK 25-100 L/4 ED, SK 100 L/4 ED. 15) Electric motor with gearbox Getriebebau Nord SK 100 L/40, SK 25-100 L/40. 16) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 DCEx 80L/Ur, year of manufacture: 2015. 17) Centrifugal fan Hürner-Funken GmbH/MM Antriebstechnik HF R160-17D/FY 71 A-4 T, year of manufacture: 2001. 18) Centrifugal fan Konz Lufttechnik/ABB Motors MPR 351/M2V AD 80 B-2, year of manufacture: 2006. 19) Axial fan Helios HRFD 35/4 TK. 20) Centrifugal pump Bedu CRT 70/3, year of manufacture: 2015. 21) Electric motor with gearbox and magnetic field coupling Nord Drivesystems/Varisco SK 33-132MP/4 TF, V 60-2 STGTRM+X+Y, year of manufacture: 2017. 22) Pneumatic agitator PTM. 23) Pneumatic agitator. 24) Pneumatic agitator WP ARO MRV050A/6150051-14-P. Including various stators for progressive cavity pumps. Documentation available. On-site inspection is possible. Individual sale possible. Kdedpsv Extbefx Adlet

Condition: used, Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan Kdedjppdhvopfx Adlet -Manufacturer: Boge, fan from compressor type SL 270 -Fan: Ø 420 mm -Engine: Type FC80/2 -Power: 1.1 kW / 2815 rpm -Hole circle: Ø 295 x 22 mm -Total dimensions: Ø 495 x 315 mm -Weight: 13 kg

Condition: good (used), fan, ventilator, electric motor, blower, emergency ventilation fan, smoke gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan Kdedpetra Uxofx Adljt -Manufacturer: Güntner, axial fan, axial fan, suction fan -Power: 2.79/1.36 kW 890/700 rpm -Fan: Ø 1000 mm -Quantity: 1 piece available -Dimensions: Ø 1000 x 330 mm -Weight: 56 kg/piece

Condition: good (used), Year of construction: 2016, functionality: fully functional, Model: GL 840 PH H-UV Year: 2016 Impressions: 218 million PQC-S OFF-PRESS CONTROLS (with USB/CF media input) – including overhead amp HIGH SPEED START-UP SMART SEQUENCE SELF DIAGNOSIS II KHS-AI - Pre-linking & removal - Self-learning function - Production management system (diagnostics, maintenance) - Register preset SMART FEEDBACK SIMULTANEOUS PRESETTING OF FRONT/BACK INK KEYS (all units) AIR PRESET FULLY AUTOMATIC PLATE CHANGING – BENDERLESS TRANSFER CYLINDER COCKING REMOTE CONTROL PAPER THICKNESS PRESETS PAPER SIZE PRESET PACKAGE • Sucker head preset • Slow-down wheel preset • Side lay guide • Delivery side jogger • Sheet release cam remote control FEEDER SIDE BLOWER PRESET FEEDER PILE SIDEWAYS CONTROL WITH PIT-LESS SKID LOADER SUCKER HEIGHT REMOTE CONTROL SUCTION TAPE FEEDER (Additional rubber wheels and belts on feeder board) ANTI-STATIC AT FEEDER SUCTION SIDELAY GUIDE FEEDBOARD VENTURI GUIDE ULTRASONIC DOUBLE SHEET DETECTOR REGISTER DETECTION (2-STEP DETECTION) ‘A’ TRANSFER CYLINDER GRIPPER PAD HEIGHT ADJUSTMENT ‘A’ (INFEED) CYLINDER COCKING REMOTE CONTROL ‘A’ (INFEED) CYLINDER ANTI-FANOUT REMOTE CONTROL ANTI-RUST TREATMENT FOR PLATE CYLINDERS ANTI-RUST TREATMENT FOR BLANKET CYLINDERS ANTI-RUST TREATMENT FOR IMPRESSION CYLINDERS ONE-TOUCH BLANKET CLAMP FOR BARRED BLANKET SHEET GUIDE OVER IMPRESSION CYLINDER AIR BLOWER ABOVE IMPRESSION CYLINDER SOLID TRANSFER CYLINDERS + GRIPPER PAD UP/DOWN (one-side adjustment) FULLY AUTOMATIC DOUBLE SIZE 3-CYLINDER PERFECTING UNIT IMPRESSION CYLINDERS WITH STAINLESS STEEL JACKET – after perfecting unit H-UV PROOF OIL SEALS INK DUCTOR INTERVAL ADJUSTMENT MOTORIZED INK FOUNTAIN ROLLER INK ROLLER NIP FOLLOWING INK ROLLER TEMPERATURE CONTROL (oscillation) INK OSCILLATION TIMING REMOTE CONTROL Kdodpoy Rmdwsfx Adlst INKER FAN (feeder side on unit) INKER/DAMPENER DE-CLUTCH – all units INK MIST EXTRACTOR FANS (GL40) – New type KOMORIMATIC DAMPENING SYSTEM DAMPENING FORM ROLLER SPEED REDUCTION (Delta Effect) OSCILLATING RIDER ROLLER ON DAMPENING FORM ROLLER BRIDGE ROLLER RIDER ROLLER UNDER DAMPENING FORM ROLLER SKEWING DEVICE ON KOMORIMATIC WATER LEVEL SENSOR AUTOMATIC BLANKET CLEANER (H-UV/pre-pack) AUTOMATIC IMPRESSION CYLINDER CLEANING (H-UV/pre-pack) INK WASHING TRAY PNEUMATIC ON/OFF AUTOMATIC INK ROLLER CLEANING – twin nozzles SHEET DECURLER AIR BLOWER ABOVE DELIVERY PILE ANTI-STATIC BAR AT DELIVERY DELIVERY SHEET ANTI-DEVIATION DEVICE AUTOMATIC LUBRICATION ON DELIVERY CHAIN GUIDE DELIVERY AREA SENSOR DELIVERY PILE EXTRACTION – DRIVE SIDE FIXED ROLLERS – A, B & C INTERCOM H-UV DRYER PREPARATION Technotrans Beta.c 280G Alcosmart, digidos.p 150C, FZT 120P. Conductivity display for Beta.c pH value display for Beta.c • PDC-SX (Print Density Control – Spectrophotometer and Automatic Register Control) • KID (Komori Info-Service Display) • Baldwin Ozone-Free Metal Halide H-UV System, including: - 1x H-UV LED – end of press - 1x H-UV LED – before perfecting unit • Technotrans Beta.c 280G • Technotrans external cooling system (installation excluded) • A-APC – Asynchronous Automatic Plate Changing • A-APC / Automatic Blanket Cleaner Parallel Control for GL-40 • K-PressNavi • DC Blowers • Special Ink Misting Cover on All Units

Condition: good (used), Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Radial fan, chip extraction fan, fan, extraction, chip blower -Manufacturer: Höcker Polytechnik, mobile filter system -Engine power: 2.2 kW -Speed: 2860 rpm -Connection input: Ø 160 mm -Base: on castors Kdsdowk Ea Rjpfx Adlot -Dimensions: 1110/810/H1700 mm -Weight: 80 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Radial duct fan for simple, direct installation in duct systems. Housing made of galvanized steel sheet. Rated voltage: 400V Frequency: 50Hz Phase(s): 3~ Power consumption: 1,246W Current: 2.25A Speed: 1,315 rpm Airflow: max. 3,168 m³/h Minimum static pressure: 250Pa Max. conveyed medium temperature: max. 40°C Max. medium temperature with speed control: 40°C Sound pressure level at 3m: 57dB(A) Motor protection class: IP44 Weight: 31 kg Rectangular duct connection, height at inlet and outlet: 300 x 600mm Kodpfx Aex Hz A Hjdlodt

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser hours: 7,000 h, laser power: 4,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 750 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, power: 4 kW (5.44 HP), Equipment: CE marking, cooling unit, dust extraction, fume extraction, ONLY 7,000 OPERATING HOURS – LASER UNIT! Special Equipment: - Automatic front-opening sliding door - Cabin lighting - Movable pendant control panel - FastLine Cell - 2D cutting tables with support rails & drawers Standard description: - Machine frame with Y-arm and integrated laser unit - Laser unit: CO2 laser TruFlow4000, high-frequency excited - Maintenance-free turbo radial blower - Mirror telescope - Cooling unit - Positioning laser diode - Laser power control - Logbook function - Drives: maintenance-free three-phase servomotors - Illumination under the Y-arm - Magnetic coupling for processing head - Head detection - AutoLasPlus - Pendant control panel - TFT color monitor - Teach panel - Network connection RJ 45 Processing Methods: - Laser cutting Kjdpfx Adsyidpqeledt - Dynamic cutting head (155mm) - Cutting head (240mm) - PierceLine

Condition: good (used), Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, centrifugal fan -Manufacturer: Alko-Therm, centrifugal fan type RZR 11-355 -Motor: Siemens 0.9/3 kW -Speed: 980/1450 rpm -Connection input: Ø 300 mm -Connection output: 460 x 300 mm -Dimensions: 1200/640/H670 mm -Weight: 89 kg Kdsdpfx Aepz Sfhodlot

Condition: used, Side channel compressor, side channel blower, vacuum pump, blower, dust extraction fan, exhaust gas extraction, welding fume extraction, suction, fan, pressure blower, vacuum blower, low pressure fan -Pressure blower: High pressure blower with transport rollers -Motor: elsto Type:ES 160M2A-40 H -Motor power: 11 kW / 2900 rpm Kdodpfxsrh Nits Adlet -Volume flow: m³/min -Connection input: Ø 185 mm -Connection output: Ø 160 mm -Base plate: 800 x 250 mm -Dimensions total: 1260/920/H1170 mm -Weight: 161 kg with pallet

Condition: good (used), Fan, ventilator, electric motor, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, diagonal fan, duct fan, diagonal fan -Manufacturer: Maico, axial fan, tube fan, diagonal fan -Type: EDR 71-0080.0665 -Power: 3.74 kW -Conveying volume: approx. 23140 m³/h -Quantity: 3 pieces available -Price per piece Kdsdpfxjrxgv Ns Adlot -Dimensions: 730/720/H720 mm -Weight: 48 kg/piece

Condition: used, Year of construction: 1991, Second-hand machine Year of manufacture: 1991 Features and technical specifications: - fully installed dryer with trolley, high-performance radial fan, electric heating, - Air inlet and outlet flaps, safety thermostat, spray system - Lift-and-swing door for convenient opening and closing of the dryer - Internal cladding: all side walls are made of special seawater-resistant aluminium - The stainless steel shelves are permanently resistant to aggressive substances found in wood, such as tannic acid, etc. - The sealing of the joints is completely durable and also allows for steaming within the unit - Stack dimensions: 530 x 105 x 115 cm Kdodpfx Adszk N Suelot - Stacking capacity: 6.4 m³ - External dimensions: approx. 690 x 140 x 200 cm - Heating: 12 kW - Motor: 1.1 kW / 400 V - with MP 902 control unit Availability: at short notice Location: 63934 Röllbach

Condition: good (used), Fan, ventilator, blower, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, suction fan, axial high-performance fan, duct fan, -Fan: axial fan axial fan -Motor: ELD type T90CS 2 1.5 kW / 2860 rpm -Bolt circle: Ø 490 x 10 mm -Number: 2x fan available -Price: per piece -Dimensions: Ø 510 x 310 mm Kdodpfx Adswy Nczolet -Weight: 22 kg

Condition: used, Thermal system, fan heater, heating elements, radial heater fan -Handover: in current condition as viewed -Controller/On/Off switch: missing -Heater fan: with temperature display -Heating capacity: unfortunately not specified -Blower: Karl Klein Type DNG 1-1,5K Kodpfxjub D R Ej Adlodt -Blower power: 0.45 kW / 31 m³/min -Outlet: Ø 60 mm -Number: 3x blowers available -Price: per piece -Dimensions: 320/265/H475mm -Weight: 10.2 kg/piece

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Kedpfx Aetk It Ssdlodt Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented