Used Rhs Gmbh Modell 7000 for sale (80,772)

Condition: new, Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity. Type: EBB1150RWP Also available with alternative agitators and in other sizes. Volume: 1150L Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm External Ø: 1390mm Total height: approx. 1300mm plus agitator drive Material: 1.4301 / AISI304 stainless steel Surface: IIIc/IIId / satin finish Internal welds ground smooth Max. operating temperature: 110°C Max. operating pressure: atmospheric - Upright design on four tubular legs with forklift channels - Top: Central traverse with two hinged covers - Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket - Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding Equipment: 1x Top traverse with two hinged cover halves, clamp function for the lid Stainless steel grating below the hinged lid, bolted and removable 1x Agitator flange on the top 1x Inlet port DN50 DIN11851 on the top 1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket 1x nameplate Propeller agitator for low-viscosity media Power: 0.75 kW Speed: 1410 rpm Hjdpfxew Dy D Do Abhenp Operating voltage: 3PH 400V

Condition: new, Factory-new agitated vessel with dissolver Type: STOC2200RWD Volume: approx. 2,266 liters Design: Vertical construction on three height-adjustable feet Construction: Single-walled Medium-contacting material: 1.4301 stainless steel (AISI304) Surface: External satin finish, internal BA (IIId) Internal weld seams: Pickled, passivated and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Total height: 2,160 mm Foot height: 500 mm Hodpfx Absw Dy Hlehonp Outlet to floor distance: 350 mm Equipment: 1x Ø 500 mm manway cover with swivel bracket on top, EPDM gasket 1x agitator flange connection IEC200 3x calotte / height-adjustable feet 1x stainless steel vent/bleeder valve DN50, non-pressurized, on the top 1x DN50 DIN11851 outlet port centered in the bottom 1x DN50 DIN11851 port with blanking cap on the top 1x DN65 DIN11851 port with blanking cap on the top 2x lifting lugs on the top 1x ladder bracket on the cylinder 1x nameplate Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 RPM Operating voltage: 3PH 400V - Heavy-duty agitator shaft mounted to the agitator motor with muff coupling - Agitator shaft dynamically balanced for smooth running within the speed range - 1 piece dissolver disc Ø 275 mm screwed onto the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM - Motor mounted flexibly on neoprene rubber-metal buffers

Condition: new, Factory-new stainless steel transport container with anchor agitator Type: SLA1150RWA Volume: Approx. 1150L Design: Vertical construction with forklift pockets Execution: Single-walled, min. 1.5mm wall thickness Material (media-contacting): 1.4301 stainless steel Surface: Satin finish outside, IIId inside Internal weld seams: Pickled, passivated, and brushed Operating pressure: Atmospheric Top cover: Central traverse with two hinged lid halves Bottom: Torispherical head with discharge groove Tank dimensions: Tank diameter: 1190mm Hnsdew Dy Ngopfx Abhep Cylinder height: 1000mm Total height: 1300mm (plus agitator motor) Features: - Central traverse with two hinged lid halves, stainless steel perforated plates underneath the hinged lid as reach-in protection, bolted, removable - Tank mounted on a stainless steel transport base with forklift openings - DN50 disc valve outlet fitting DIN1185, seal EPDM - Nameplate Agitator: Central anchor agitator Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTGMK/0.75-13 Power: 0.75KW Speed: 13 RPM Operating voltage: 3PH 400V Product-contacting material: 1.4301 stainless steel - Gearbox by Getriebebau NORD - Solid agitator shaft connected to the agitator motor with a sleeve coupling, removable - Agitator shaft balanced for smooth rotation within the speed range - Large-surface stainless steel anchor-style agitator, welded design, weld seams pickled, passivated, and brushed - Stainless steel flange with shaft seal, EPDM Agitator control: CEE plug switch on the tank, on/off switch, no-voltage release, emergency stop Fully prewired

Condition: good (used), Used pressure vessel with insulation on castors Item number: 10779 Last use: Pharmacy Volume: 300 liters Type: Upright on 4 castors Material (wetted parts): 1.4571 / AISI316 Version: with insulation Operating pressure according to type plate: 0.5 bar Operating pressure sheath: 1.5 bar Max. Max. operating temperature: + 95 °C Tank dimensions: Manhole: 400mm Hodpfxjrl Rrtj Abhonp Outer diameter: 830mm Height of rollers: 880mm Total height: 1720mm Total width: 1090mm Total length: 1090mm Materials Interior: 1.4571 / AISI316 Outer parts: 1.4301 / AISI304 Equipment: Type plate: Yes Spout diameter: 25mm Distance drain to floor: 390mm Empty weight: 184Kg Rolling frame prepared for agitator

Condition: like new (used), Used heatable/coolable stainless steel container Type: STOC3300TPRW Item number: 10844 Volume: Approx. 3300 liters Type: Upright design on three height-adjustable feet Design: Single-walled with thermoplate Material (wetted parts): 1.4301 stainless steel (AISI304) Surface: Satin-finished outside, BA (IIId) inside Internal weld seams: Pickled, passivated and brushed Max. Operating pressure: Atmospheric Max. Operating pressure thermoplate: 1.8 bar Max. Operating temperature: 95°C Top plate: 15° conical bottom Bottom: conical bottom 15° with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1600mm Cylinder height: 1500mm Total height: 2430mm Equipment: Hjdpfjuy Ribox Abhjnp 1x Ø 500mm manhole cover with swivel bracket on the top, EPDM seal 1x ladder bracket 1x thermoplate on cylinder H=900mm on cylinder 1x agitator flange connection IEC250 3x spherical caps / height-adjustable feet with foot plates 1x vent valve DN50 stainless steel unpressurized on the top plate 1x DN50 DIN11851 spigot outlet in the center of the underbody 1x DN50 DIN11851 spigot on the top shelf with blind cap 1x DN65 DIN11851 spigot on the top shelf with blind cap 1x type plate

Condition: new, Factory-new, electrically heated stainless steel mixing tank Article number: EBB150RWAD Volume: 152L Dimensions approx.: Ø 660mm x cylindrical height 625mm Overall height: 910mm Material: 1.4301 stainless steel V2A Surface: Matte finish inside and out Welds ground smooth Operating temperature max.: 110°C Operating pressure tank: ATM -Vertical design on rollers -Top: Central cross member for the agitator with two hinged lid halves -Bottom: Flat bottom with side outlet DN50 DIN11851 and disc valve -Agitator flange on the top -2x handle for pushing -1x nameplate Hedpfxsh Hxxfj Abhsnp Heating system: Indirect heating Double jacket around the tank with glycerine filling as the heat transfer medium. Heating is carried out by an electric heating element in the double jacket. Power: 9KW Operating voltage: 3PH 400V Incl. supply line 16A CEE plug Centric agitator: Slow-speed anchor agitator with wall scrapers Type: SRTGMK/0.37-9.5 Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.37KW Speed: 0-9.5 RPM Operating voltage: 1PH 230V Material in contact with product: 1.4301 stainless steel -Gearbox and motor in the latest aluminum technology, manufacturer Getriebebau NORD -Gearbox with food-grade approved oil filling "Klüber" -Solid agitator shaft attached to the agitator motor with a sleeve coupling, detachable -Agitator shaft balanced for smooth running in the speed range -1 piece of large anchor agitator in the tank, welds ground smooth, arranged close to the wall -2 Teflon wall scrapers in the cylindrical area, one at the bottom -Stainless steel flange with shaft seal, EPDM Speed control: Compact frequency inverter on the agitator motor with on/off switch and potentiometer Control: 5m cable and RCD socket switch, undervoltage release Eccentric agitator: Speed-adjustable dissolver agitator Type: SRTMKD/1.1-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 1.1KW Speed: 0-1690 RPM Operating voltage: 3PH 400V Material in contact with product: 1.4301 stainless steel -Motor in the latest aluminum technology, manufacturer Getriebebau NORD -Solid agitator shaft attached to the agitator motor with a sleeve coupling, detachable -Agitator shaft balanced for smooth running in the speed range -1 piece of dissolver disc Ø 125mm screwed onto the end of the agitator shaft, seal O-ring, EPDM -Stainless steel flange with V-ring seal, EPDM -Stainless steel spacers for motor mounting Speed control: Frequency inverter mounted on the motor, manufacturer Getriebebau NORD. On/off switch, potentiometer, phase inverter Control: CEE plug switch on the tank with undervoltage release and phase inverter, emergency stop

Condition: excellent (used), Used stainless steel tank Article number: 10896 Previous application: CIP (Cleaning-In-Place) Volume: 3300 L Type: Vertical, standing on 3 legs Material (in contact with product): Stainless steel V2A / AISI 304 Hodpfjyw Rn Hsx Abhenp Bottom: Klöpper head Max. operating pressure: Atmospheric Tank dimensions: Internal diameter: 1190 mm External diameter: 1200 mm Overall height: 3450 mm Cylindrical height: 3000 mm Overall width: 1250 mm Materials: Interior: 1.4301 / AISI 304 Exterior parts: 1.4301 / AISI 304 Features: Nameplate: no Leg height: 420 mm Outlet diameter: 37 mm / 37 mm Clearance outlet to floor: 160 mm / 500 mm

Condition: new, Factory-new electrically heated stainless steel agitator tank EBB90RWP Including operating manual and CE declaration of conformity. The double jacket is filled with thermal oil, which is heated by an electric heating element. Alternatively available with other agitator types and in other sizes. Volume: 97L Hnjdpfx Aeym Arbobhop Dimensions approx.: Ø 540mm x cylindrical height 625mm Total height: 910mm (+ agitator motor) Material: 1.4301 stainless steel (V2A) Surface: inside and outside finely ground (matte finish) Weld seams ground smooth Max. operating temperature: 110°C Operating pressure (tank): Atm - Upright design on castors - Top: folding lid, half bolted, half hinged, with removable stainless steel grating for reach-in protection - Bottom: flat base with lateral outlet DN50 DIN11851 and disc valve - Agitator flange on the top cover - 2x push handles - 1x nameplate Propeller agitator Power: 0.25 kW Speed: 980 rpm Operating voltage: 3PH 400V

Condition: good (used), Year of construction: 1989, Equipment: type plate available, Used stainless steel container Last use: Pharmacy Item number:10821 Volume: 20000L Operating pressure: Atmospheric Max. Operating temperature: +80 °C Type: horizontal on 4 feet Material (wetted parts): 1.4301 / AISI 304 Design: single-walled Tank dimensions: Cyl. height: 4500mm Total height: Approx. 3100mm Height of the feet: 970mm Outer diameter: 2500mm Total width: 2750mm Total length: 4600mm materials: Hnjdsth Shqepfx Abhsp Interior: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Manhole: 440 x 340mm Type plate: yes

Condition: good (used), Used, insulated stainless steel tank with agitator and double jacket Last use: Food Article number: 10340 Volume: Approx. 6300L Type: Standing on three legs Material (in contact with media): 1.4301 / AISI304 Design: Insulated with double jacket at the bottom Bottom: Flat bottom Top: Domed Operating pressure according to nameplate: ATM Tank dimensions: Hnsdpfjd Nap Rjx Abhjp Tank diameter: 2030mm Cylindrical height: 2000mm Distance from outlet to bottom: 330mm Height of legs: 390mm Overall height: 2940mm Overall width: 2050mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Domed lid Ø 490mm Outlet diameter: 40mm Slow-speed agitator Cylinder insulated Bottom with double jacket

Condition: good (used), functionality: fully functional, TRUMPF Hüttinger GmbH + Co. KG RF Generator, 13.56 MHz, 20 kW, 1880203, TruPlasma RF 3020 Model: 1880203 Type: TruPlasmaRF3020 Hnjdpfxeuykf Aj Abhsp Technical data: 400V-480V 50/60 Hz 41.8 A - 34.5 A 20 kW

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum fuse rating: 16A Hnedpfxexzukkj Abhep Frequency: 50/60Hz Electrical connection power: 4.5kW Temperature range: +12°C above ambient temperature to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Heating time to 150 °C: 25 min Recovery time after 30 s door opening at 150 °C: 6 min Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per insert: 45 kg Maximum total load: 315 kg Energy consumption at 150 °C: 800 Wh/h Maximum number of inserts: 16 External dimensions: Width: 1,165 mm Height: 1,590 mm Depth: 870 mm Internal dimensions: Width: 1,000 mm Height: 1,300 mm Depth: 570 mm Important note: The wheels are installed/included.

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1731 067, Equipment: CE marking, onboard computer, For sale is a tape gluing machine from Herbert Meyer GmbH. Working width: 1800 mm, can operate in continuous mode. The machine is from 2013 and is in good technical condition – ready for operation. I can provide more information via email. Power: 32.2 kW Supply voltage: 400 V Supply current: 47.5 A Air supply: 6 bar Hjdpfszfi Hbex Abhsnp Fusing machine with a particularly efficient heating zone and precise pressure of the pressure rollers for even pressure. Energy savings and clean operation guaranteed.

Year of construction: 2008, condition: excellent (used), STULZ ALD 1062 GE precision cooling / close control air conditioning units, designed for data centre, server room and technical cooling environments. The units are manufactured by STULZ GmbH Hamburg, Germany. They are CE marked and operate with R410A refrigerant. Technical details: Manufacturer: STULZ GmbH Hamburg Type: ALD 1062 GE Item No.: A72170 Hnjdpfx Abjzklicjhep Years available: 2008, 2009, 2010 Refrigerant: R410A Supply voltage: 400V ±10% Frequency: 50Hz ±1% Max. operating pressure: 40 bar Max. refrigerant filling charge: 12.4 kg Made in Germany Application: Data centre / server room / technical cooling Condition: Used Available quantity: 2008 without ECU: 4 units 2008 with ECU: 3 units 2009 with ECU: 1 unit 2010 with ECU: 1 unit 2010 without ECU: 2 units Total available: 11 units

Year of construction: 2012, condition: excellent (used), Used STULZ ALD 1072 GE precision cooling / close control air conditioning units, suitable for data centre and technical room cooling applications. The units are manufactured by STULZ GmbH Hamburg and are CE marked. They use R410A refrigerant and operate on 400V / 50Hz power supply. Units are available with and without ECU, depending on requirement.Technical details: Manufacturer: STULZ GmbH Hamburg Type: ALD 1072 GE Item No.: B84181 Years available: 2012 and 2014 Refrigerant: R410A Supply voltage: 400V ±10% Frequency: 50Hz ±1% Max. operating pressure: 40 bar Max. refrigerant filling charge: 11.20 kg Made in Germany Application: Data centre / server room / technical cooling Condition: Used Available quantity: 2012 with ECU: 2 units Hodpezklcisfx Abhenp 2012 without ECU: 3 units 2014 with ECU: 1 unit 2014 without ECU: 1 unit Total available: 7 units

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes Hjdpfx Abexwvrushjnp - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Ultrasonic cleaning and passivation are possible (citric acid-based), CNp vacuum process for, e.g., blind holes. Hnodpozhv Udsfx Abhep Suitable for high-purity industries, the electronics industry, ranging from coarse/pre-cleaning tasks under robust industrial conditions to fine and ultra-fine cleaning processes. Batch size: 670 x 480 x 300 mm. Components made of metal, plastic, or ceramic. Suitable for bulk materials or positioned individual components. Fully or partially automated, e.g., diesel injection components.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - system for automatically determining the focus distance - EZCAD marking software in German / English Hnodpfxswkpx Ro Abhep - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the system is very practical and can be used anywhere. The universal laser marking system LAS 22 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20 or 30 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm Hjdpfxeuy H Nqs Abhonp - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: new, R. & S. Keller control panel for Sinumerik 820 T, unused, 100% functional. Hnjdpji Ecl Iofx Abhep

Condition: new, R.& S. Keller control panel cover, Dialog 11, unused, 100% functional. Hnjdpfoi Ecmaox Abhjp

Condition: new, R.& S. Keller control panel cover, Dialog 11 model, in original, unopened packaging, unused, 100% functional. Hedei Ecmdspfx Abhonp

Condition: new, R. & S. Keller operating panel for Sinumerik 820 T, unused, in open original packaging, 100% functional. Hedji Ecl Sjpfx Abhsnp

Condition: used, Year of construction: 2007, REF: MM6439 Wick und Schaefer GmbH flow-meter rotary filler set up for 500ml PET sports cap filler with bottle cap Infeed/sorter and bottle cap tightener. Hnsdpfx Aoza Eyujbhop Manufacturer - Wick und Schaefer GmbH. Model - MIN.FM.Servo. Date of manufacture - 2007. 2-stage filling - stage 1 is main fill and stage 2 is final top up fill. With attachment for CIP. Previously used for vitamin enhanced flavoured water. Overall dimensions - 3600mm long x 2130mm wide x 2300mm high.

Condition: used, DHS 1-G / DHS1G, Feinmess Dresden GmbH Display Handling System SN:020702 Model: DHS1-G Hsdpfxeq S Tdgo Abhjnp Condition: Used