Used Robust Reuser Sd 900/30 Kw for sale (55,845)

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: + Profile rotor for increased throughput Lrjdpfx Aed Db N Ien Isp Options: Double knife row + €895 net Veneer and paper scraper + €970 net * recommended for extremely thin materials with a thickness of less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide variety of materials, such as residual wood of all kinds, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard and plastics. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. We would be happy to provide you with a free test using your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase, Knives: multiple rotation, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Throughput 1 - 5 hopper loads / h, Hydraulically operated slide, Screen size as required (10 - 40 mm), Suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30% (oven-dry). Standard included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star/delta start • Automatic OFF when the rotor is idle • Removable suction chute • Speed 70 - 100 rpm for higher throughput • Cyclic control to avoid idle times • Performance-enhancing step control of the hydraulic slide • Stable guides for the hydraulic slide Further shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt + €8,770 net Horizontal part: 1200 mm Ascending part: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the input/raw material: - The moisture content (oven-dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear.

Condition: as good as new (ex-display), Year of construction: 2024, Machine dimensions: • (L x W x H) 9,350 mm x 2,800 mm x 2,300 mm, length including filter: 5,300 mm. Technical details: • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 6 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm Lsdpfxod N Rfde An Isrp • Repeatability: ±0.05 mm Standard equipment: • Control system: Siemens Sinumerik 840 D • Laser head: Precitec light Cutter F 125 Focus • Sheet support detection and measuring system • Positioning laser diode • Automatic sheet changer • Automatic nozzle cleaner • Central lubrication unit • Chip collection tray • Software: Lantek or Metalix CAD/CAM software with auto-nesting • Remote control: remote maintenance Laser cutting options: • Pierceline (piercing settings) • Focusline • Plasmaline • Fastline • Flyline Options include: • Tower with 10 pallet spaces • Automatic chip conveyor • Integrated camera (part tracking, micro-joints) • Air dryer • Automatic nozzle changer • Camera inside

Condition: new, 2021 Durma 15 kW Fiber Laser Manufacturer: DURMA Type: HD-F(L) 3015 Working area X-Y-Z: 3060x1530x160 mm Laser power: 15000 Watt IPG Control system: Siemens Sinumerik 840D Sheet metal thickness, mild steel: 40 mm Sheet metal thickness, stainless steel: 30 mm Sheet metal thickness, aluminum: 30 mm Sheet metal size: 3048x1524 mm Load capacity: 200 kg/m² Speeds X-Y axes: 100 m/min Simultaneous speeds X-Y axes: 280 m/min Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Footprint L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Lsdjgk Nlpjpfx An Ierp Standard equipment: Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet metal position and size measurement system Automatic nozzle cleaning Positioning laser diode Central lubrication Simple user interface, parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optional Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking IPG fiber laser source 15000 Watt including cooler Optional extended equipment: Filter, compact dust collector Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode and automatic sheet metal layer detection and measurement Camera Inside Linear drive Upon request, we will gladly provide you with further information.

Condition: as good as new (ex-display), Year of construction: 2024, HD-FS Smart 3015 Fiber X-axis: 3100 mm Y-axis: 1550 mm Z-axis: 125 mm Max. sheet metal dimensions: 3048 x 1524 mm Max. sheet metal weight: 200 kg/m2 X-axis: 100 m/min. Y-axis: 120 m/min. Synchronization: 156 m/min. Acceleration: 16 m/s2 Positioning accuracy: + 0.05 mm Reproducibility: + 0.05 mm Cutting thickness Mild steel: 25 mm Stainless steel: 15 mm Aluminum: 20 mm Standard equipment Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet metal positioning and size measurement system Automatic nozzle cleaning Positioning laser diode Central lubrication Simple user interface, parameter page (power, speed, pressure) External CAD/CAM programming software with auto-nesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Lrsdpfoft Sbisx An Isp Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, compact dust extraction system Vanterm Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode and automatic sheet layer detection, measurement The machine can be inspected and demonstrated at our demo center in Staufenberg at any time by appointment. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: as good as new (ex-display), Year of construction: 2024, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 15 mm, positioning speed: 5 m/min, repeat accuracy: 5 mm, overall weight: 12,000 kg, warranty duration: 12 months, working range: 3,050 mm, Equipment: safety light barrier, Manufacturer: DURMA Model: HD-F 3015 III Fiber Working area X-Y-Z: 3060x1530x160 mm Laser power: 10000 Watt IPG Control system: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness, mild steel: 30 mm Sheet thickness, stainless steel: 26 mm Sheet thickness, aluminum: 15 mm Sheet thickness, brass: 20 mm Sheet thickness, copper: 15 mm Sheet size: 3048x1524 mm Load capacity: 200 kg/m² Speeds, X-Y axes: 100 m/min Speeds, X-Y axes, simultaneous: 280 m/min Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Footprint (L/W/H): approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet positioning and sheet size measuring system Automatic nozzle cleaning Positioning laser diode Central lubrication Simple user interface, parameter page (power, speed, pressure) External CAD/CAM programming software with auto-nesting, optionally Lantek software Work area lighting Warning light Lrodpfodx Nalsx An Isp Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 10000 Watt including cooler Filter, compact dust collection system Vanterm Motorized chip conveyor for small parts/scrap Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode and automatic sheet layer detection, measurement Automatic nozzle changer The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by prior appointment. Further machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 15 mm, power: 12 kW (16.32 HP), warranty duration: 24 months, Equipment: safety light barrier, DURMA HD-FN 3015 fiber laser cutting system: The ideal price-performance solution. The DURMA HD-FN 3015 fiber laser cutting system is the best choice for companies looking for maximum performance and efficiency at an unbeatable price. This state-of-the-art system combines innovative technology with user-friendly operation, offering outstanding benefits for metalworking. Technical specifications Laser power: 12 kW With automatic shuttle table Maximum sheet thickness: Mild steel: 30 mm Stainless steel: 25 mm Aluminum: 30 mm Copper: 15 mm Cutting area: 3060 x 1525 mm Movement axes: X-axis: 3060 mm Y-axis: 1525 mm Z-axis: 125 mm (max. 275 mm) Metal sheets Maximum sheet size: 3048 x 1524 mm Maximum sheet weight: 240 kg/m² Lrodpfx Ansu E Tczj Iop Speed and precision: Maximum speed X-axis: 100 m/min Maximum Y-axis speed: 100 m/min Maximum simultaneous speed: 141 m/min Maximum acceleration: 14 m/s² Positioning accuracy: ± 0.05 mm Repeat accuracy: ± 0.05 mm Main features of the system: ・Changing table: Positioned lengthwise for best access to loading and unloading systems. ・Enclosed cutting chamber: Equipped with protective glazing for maximum safety. ・CNC graphic control: With a user-friendly touchscreen for easy operation. ・Laser source: Brilase 12 kW. ・Cutting head: Automatic adjustment of the focus for precise cutting processes. ・Integrated cooling system: Ensures efficient cooling of the cutting head and laser source. ・CAD/CAM software: Enables programming including autonesting for optimum material utilization. ・Positioning laser: Supports the exact positioning of workpieces. ・Sheet metal check system: Automatic detection of the sheet metal position and dimensions for improved process reliability. ・Automatic nozzle cleaning: Ensures continuous cutting quality. ・Central lubrication: For smooth machine maintenance. ・Waste box: For a clean working environment. ・Work area lighting: Ensures good visibility during operation. ・Multi-chamber extraction system: Effective removal of smoke and particles. ・Light barrier protection: Ensures safety when changing tables. ・Remote maintenance access: Facilitates remote diagnosis and maintenance.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 33,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grained steel welded construction, saddle plate with 2 interchangeable kingpins and 2 kingpin positions. Front locking on tipper ram mount with bilateral tapered wedges, rear locking on continuous swivel shaft with return spring. Container mounts: Locking crossmember, 2-fold for locking 1 x 20 ft or 1 x 30 ft container. Adjustment via central telescope as an interlocking central tube frame with bolt locking. 24 ton, 2-stage support jack, single-sided operation, with straight lower part, without thrust compensation. Free support foot angle or free swivel radius to the rear approx. 1850 mm. 2 chock blocks with holder. Half-shell mudguards with anti-splash flaps according to EC standards. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection) Actuation hydraulically via truck auxiliary drive. Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Axle/chassis laser-aligned, reducing tire wear and fuel consumption. Axle spacing offset mm (combined transport) up to 44 tons total weight. Ledpfx Anei Ri Avo Ijrp Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake Tele Control Axle load reduction for easy telescoping. 2 fail-safe coupling heads at the front, without connecting line. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! With lifting and lowering valve. Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the instrument panel in the driver's cab; the truck must be pre-equipped accordingly, no truck installation. Wheels and Tires 385/65 R22.5, manufacturer's choice. Steel rims, factory silver. Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole fail-safe sockets at the front, without connecting cable. Additional LED work light at the rear, switched via reversing light. Country of Approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single-line. Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear. Paintwork Frame DB 7350 Novagrau (dark gray) 10-year warranty against rust-through. Support legs, black coated. Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Condition: used, mileage: 6,07,408 km, power: 260 kW (353.50 HP), first registration: 12/2003, fuel type: diesel, number of seats: 38, gearing type: automatic, emission class: euro3, color: white, Equipment: ABS, air conditioning, * Our internal number: 1114 * Take-away price - Pick-up price * O 530 G * EZ 30.12.2003 * Large air conditioning system * 260 KW / EURO 3 * ZF automatic transmission * Matrix display * Folding windows * Electric wheelchair ramp installed * Tinted glass * Video surveillance * Ticket dispenser wiring * Lifting/lowering * 3 x double-wide interior swing doors * Compressor replaced Ledpfx Anotpr U Re Ierp * Alternator replaced * New four-circuit protection valve - 10/21 * All V-belts and rollers new - 10/21 * New paint: 2019 * Clean frame! * Extensive CUSTOMER SERVICE in October 2021 - air filters, fuel filters, oil filters, etc. * etc. * All information is provided without guarantee. * We reserve the right to sell items prior to purchase.

Condition: used, Year of construction: 1992, Lippert belt conveyor GF 22300-900-700 RA2266 Technical data: Conveyor length (NL): 22300 mm frame width (NB): 900 mm belt width (GuB): 700 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Lrjdpertu A Djfx An Ijp Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,575 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1996, output 30 kW suction power 4.200 l/min turning speeds 5.092 U/min overpressure 10 bar dimensions of machine L x W x H 1,72 x 0,90 x 1,60 m Ljdpfx Aoxu Ntaen Ierp

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802035478, empty load weight: 4,660 kg, maximum load weight: 33,340 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 10,450 mm, total width: 2,550 mm, total height: 1,325 mm, suspension: air, tire size: 385/55 R22.5", tire condition: 100 %, color: grey-black, Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin and 2 kingpin positions Front locking on tipper ram mounting with lateral wedge locks, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container attachments: Locking crossbeam, 2-fold for locking 1 x 30 ft container 24 ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-out compensation Free support leg spacing or free rear swivel radius approx. 1850 mm 2 chock blocks with holder Aluminum side underrun protection Without underrun protection Semi-fender With anti-spray flaps according to EC Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection). Attention! Tilting angle limited! Operation hydraulically via truck auxiliary drive Hydraulic connection with hose and HDK screw fitting NW = 48 mm with knurled nut Axles + Suspension BPW disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" Reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons total weight Ljdpfx Aezaz Tken Ierp Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brakes" (start-up assistance is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Country of approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust" Support legs black coated

Condition: used, mileage: 4,44,000 km, power: 260 kW (353.50 HP), first registration: 12/2017, fuel type: diesel, number of seats: 31, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1181 * MB O 530 Citaro C2 * Powerful engine: 260 kW / 354 HP * New paintwork by previous owner in 2026 * First registration: 12/2017 - Model year: 2018 * 1/2/3/D/N/R - Voith gearbox * Retarder * LED destination display: front/side/side/rear * Control unit * Manual ramp * Air conditioning * Auxiliary heater * Fog lights * Interior video surveillance * Reversing camera * Driver protection screen * Radio Lrodjyw Ekiopfx An Isp * 31 seats * 68 standing places * Last workshop inspection on record (invoice approx. €3,700): - Renewal of tie rod right & left side - Axle alignment - DPF diesel particulate filter * Rear axle tyres: very good condition - at least 90% tread * Front axle: 30% tread * etc. * Overall condition: clean * The customer is required to independently verify the condition and equipment of the goods/vehicle! * etc. * Vehicle may still be in service / mileage and condition may vary * All information without guarantee * Subject to prior sale * Please refer to our terms and conditions

Condition: excellent (used), Year of construction: 2012, ATLAS COPCO GA30VSD screw compressor, machine with inverter, recently serviced. Technical specifications: capacity: 5.58 m3/min; engine power: 30 kW; maximum pressure: 13 bar; year: 2012; operating hours: 11816 h!!! Price: 24,500 net Price: 30,135 gross Lrjdpfxjy S T The An Iep Compressor is fully functional, ready for operation, comes with a warranty. We provide service support.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, functionality: fully functional, Cable Granulation Plant GUIDETTI SINCRO MILL 530 + Pre-shredder PMG-H 900 – Immediately Available – As New For sale is a high-quality cable recycling plant from the Italian manufacturer Guidetti, consisting of: • Guidetti Sincro Mill 530 cable granulation plant • Guidetti PMG-H 900 pre-shredder • External filtration unit The system was installed, tested at a customer site, and then professionally dismantled. Due to a project change, the plant is now for sale. Condition: Nearly new (test operation only) Availability: Immediate ex stock – no lead time Price: Significant savings compared to new equipment — Special advantages: • Immediately available – no long lead times as with new machines • Only operated for test purposes – correspondingly minimal wear • Complete system incl. pre-shredder • Proven Guidetti technology — Description: The Sincro Mill 530 is a compact, fully integrated cable granulation plant for processing mixed copper and aluminum cables – without pre-sorting. Ledpfx Aoy Ahlyjn Iorp The system consists of: • Granulator (cutter mill) • Zig-zag separator • Turbo mill for fine grinding • Dry separation table Material purity up to 99% can be achieved. In combination with the PMG-H 900 pre-shredder, the system offers a high-performance recycling line for industrial applications. — Technical Data Sincro Mill 530: • Throughput: 450 – 600 kg/h • Motor power: 53 kW • Dimensions (L x W x H): 3410 x 1515 x 4395 mm • Weight: approx. 2,700 kg • For processing copper and aluminum cables — Technical Data Pre-shredder PMG-H 900: • Power: approx. 38.5 kW • Dimensions (L x W x H): 2110 x 2070 x 2245 mm • Weight: approx. 2,840 kg Suitable for pre-shredding cables, non-ferrous metals, and plastics. — Note: The plant is available at short notice. Subject to prior sale. Inspection by appointment possible.

Condition: excellent (used), Year of construction: 2022, Provisur AM2C Beluga SD1830 separator features cutting-edge separation technology combined with a low RPM, single screw feed system, ensuring delicate handling of raw materials. It provides a high-quality, ground product while keeping the fibers and textures intact. The final product is of high quality. Controls are mounted directly on the machine for easy access. The design has a small footprint, saving space. Machine has a versitile operation and can work with red meat, poultry, pork, fish, fruits, vegetables etc. Technical features: Gentle handling – Low calcium ( Lrsdjth Ufwopfx An Iep

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,889 h, laser power: 2,000 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been very well maintained, regularly cleaned, and serviced. It is in like-new condition! TECHNICAL DETAILS Laser power: 2,000 W Laser source manufacturer: IPG Laser type: Fiber laser Sheet metal thickness max.: 15 mm Sheet metal thickness steel max.: 15 mm Sheet metal thickness stainless steel max.: 8 mm Working length: 3,000 mm Working width: 1,500 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Control type: CNC control Control manufacturer: Mazak Cooling type: Water Lrjdey Tvzkopfx An Ijp Automation level: Automatic Chuck type: Electric Input voltage: 380 V Input current type: Three-phase Laser operating hours: 8,212 h Cutting hours: 1,657 h Year of last overhaul: 2024 EQUIPMENT CE marking Documentation/Manual Safety light curtain Rotary table Extraction system

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,650 h, control type: CNC control, laser hours: 8,650 h, laser power: 2,000 W, AMADA CNC Fiber Laser LCG-3015 AJ 2 kW Fiber skid table CT no.: 84561000 / Japan / no preferential origin AMNC Multi Media controller 2000 watt laser power AJ fiber laser Principle: flying optic 3-axis direct drive (X/Y/Z) oil shot function Including sensor cutting head Including lens quick-change system Including cutting lens 150, 190, 190 AX mm Including NC gas control Including NC focus control Including clean cut, high-pressure cutting Including aluminum cut function Including air purge system Including safety according to CE Including shuttle table PCLCG3015 Year of manufacture 04/2014 Lrodpfoycf N Iox An Ijp

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/1993, loading space length: 7,010 mm, loading space width: 2,480 mm, total length: 10,610 mm, total width: 2,490 mm, wheelbase: 6,210 mm, color: other, Year of construction: 1993, Axle configuration Max. front axle load: 10000 kg Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Weights Empty weight: 6.220 kg Carrying capacity: 21.780 kg GVW: 28.000 kg Functional Height of cargo floor: 92 cm Maintenance, history and condition APK (MOT): tested until 12/2026 Technical condition: very good Visual appearance: very good Identification Registration number: WK-10-RF = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Lredozacfujpfx An Iep When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, machine/vehicle number: 12727, Rotor diameter: 300 mm Rotor width: 900 mm 3-knife rotor Lrsdpfx Aneyr Tqxs Isp 2 rows of stator knives Infeed cross-section approx. 300 x 900 mm Drive motor: 30 kW Including flywheel

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,750 kg, total height: 2,000 mm, total length: 1,560 mm, total width: 1,320 mm, We are a company with over 30 years of experience in trading machines for the plastics industry. All offered machines are available from stock, and we can perform tests on your material. The XC series granulators are designed for shredding both soft and hard plastics. The stainless steel housing and bearing lubrication system ensure quiet and stable operation. Each model is equipped with an ammeter. Versions with cyclones are available. Control cabinets are built with Siemens components. Material trials with customer samples are possible before purchase. For any questions, please contact us via email or the provided phone number. P&F Wartacz was established in 1990 and today we are the oldest trading company in the plastics processing sector, continuously distributing injection molding machines, granulators, crushers, chillers, conveyor belts, peripheral equipment, and spare parts. Rotor diameter (mm): 500 Rotor width (mm): 720 Motor power (kW): 37 kW Rotor knives (pcs): 27 Fixed knives (pcs): 4 Weight (kg): 2750 The unit can be purchased with extraction and cyclone instead of a drawer. The machine is unused and available immediately, with testing possible before purchase. Lredpfjw Inzwox An Iop (Several dozen machines in stock)

Condition: used, Year of construction: 1990, Electric motor 30.0 kW Lrodpfsy Iz Dgsx An Iop 1460 rpm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4533.22 € 300 x 40 x 51 mm 2,2 kW 1250 1/min 42 mm 540 mm 530 mm 1180 mm 800 x 600 x 1400 mm 90 kg With machine stand, integrated suction, emergency stop pushbutton and brake (Art.317.779) Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Lrodoyrhpcepfx An Isp Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVE: Version without suction (Art. 317.776) Version without stand, suction and brake/emergancy push button (Art. 317.764)

Condition: good (used), Year of construction: 2007, functionality: fully functional, overall weight: 519 kg, total length: 700 mm, total width: 1,800 mm, total height: 1,400 mm, power: 30 kW (40.79 HP), volume flow: 274.8 m³/h, operating pressure: 13 bar, Used, in good condition. Technical details: Lsdpoy Ruz Refx An Isrp - Overall dimensions: approx. 1,800 x 700 x 1,400 mm (W x D x H) - Motor power: 30 kW - Pressure version: 13 bar - Operating pressure: 12.8 bar - Volume flow: 4.58 m³/min - Rated speed: 7,200 r/min - Frequency: 50 Hz - Weight: approx. 519 kg

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 49600 € 947.36 € 130 to 600 mm 5 2 50x18 mm 80 mm 600x18 (max. 600x20 mit D mm 120x120x11 (max. 150x150x mm 45/40 mm 130x12 mm 250x12 mm 15 kW hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V50 and V90 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch Ledpfxeynngge An Iorp

Condition: good (used), Year of construction: 2008, power: 300 kW (407.89 HP), For sale is a high-performance chiller unit from Cofely, including water treatment, optimized for supplying plastic processing machines (injection molding). The system is in good, operational condition. With the division into two separate water circuits (15°C and 22°C), highly efficient cooling of tools and machine components is ensured. All pumps were renewed in 2023. Technical data: Lrsdpfxjyvy Nws An Ijp - Year of manufacture: 2008 - Pumps replaced: 2023 - Cooling capacity: 300 kW - Application: Chiller for injection molding production (up to 20 machines) - Temperature circuit 1: 15°C (tool cooling) - Temperature circuit 2: 22°C (machine/hydraulic cooling) - Control: Central control cabinet in container - Evaporator dimensions (L*W*H): 3,500*3,500*4,500 mm - Technical center: Installed in a 20-foot container The system is offered ex works (self-collection). Dismantling and delivery can be arranged for an additional charge. Transport and loading can also be organized Europe-wide for an extra fee upon request. Prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team is happy to assist. Trade-in or exchange possible! Machinery purchase/sale BUYING/SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or would you like to sell your machine? For further information or to get in touch, please visit our website.