Used Romaco Noack Unity 300 for sale (13,026)

Condition: excellent (used), Year of construction: 2009, clamping force: 3,000 kN, screw diameter: 65 mm, clearance between the columns: 710 mm, injection pressure: 2,070 bar, injection weight: 981 g, mold height (min.): 225 mm, Clamping Unit • Clamping force: 3000 kN (300 t) • Distance between columns: 710 x 710 mm – special design, increased distance compared to the standard version • Mold height: min. 225 mm / max. 1125 mm • Opening stroke: 900 mm • Maximum distance between mounting plates: 1125 mm • Mounting plate size: 1030 x 1020 mm (920 mm) • Special hole pattern in the clamping plate and nozzle plate – made to order • Manual device for removing the upper column, with a removable cover in the front guard and a wrench for the column nut Injection Unit • Injection unit 2250 • Screw diameter: 65 mm, L/D ratio 22.0 • Shot volume: 1078 cm3 • Maximum injection weight (PS): 981 g • Specific injection pressure: 2070 bar • Equipment package: wear and corrosion-resistant plasticizing unit, adapted for processing PP and PPSU, diameter 65 mm • Hart-PVC package: without internal screw cooling, with external cylinder cooling instead of standard design • High-temperature heating bands for a working temperature of 450 °C • 8 standard open nozzles, plus: 4 for the PVC cylinder and 4 for the PP cylinder, through holes 4, 8, 10, and 12 mm • Wrench for screw tip for a 65 mm diameter UNILOG B6S Control System - Upgrade package • Controller with increased computing power • APS and cycle time analysis • Four freely configurable network connections • Userpage and notepad • Real-value graphics with 16 curves • Event log depth: 10,000 events • Quality table memory depth: 10,000 events • Four envelope curves, foil function keys • SPC evaluation and trend charts • Injection, holding, and back pressure controlled by a servo valve Hydraulics and Hydraulic Cores • Core movement and parallel ejection are performed by an additional DFEE pump, size 71, flow rate 95 l/min • 4 x hydraulic core for the clamping plate NW 10 (on/off valve), interfaces according to EUROMAP 13, with active ejector plate protection • Cores mounted on the upper side of the clamping plates, each with connections for two consumers • 2 x core junction box in a special design: 25 3-pole Amphenol plugs, mounted on the clamping plate on the operator side and the rear side, connected in series • 4 x core pressure relief upon emergency shutdown, engine stop, and after pressing the button in setting mode – relief occurs simultaneously for cores on the clamping side and the nozzle side • 4 x twin check valve for NW 10 core • 2 x pneumatic valve for controlling one closing nozzle in the mold or several in parallel (1000 l/min), mounted in the center console at the rear of the machine Hnsdpfszxfg Rex Ab Ijt Mold Heating, Electrical System, and Connections • 12 x temperature control circuit for hot runner or mold heating, power 2.3 kW, 10 A, interface according to HASCO standard (1 x HASCO 24-pole for max. 6 zones) • Mounting location for heating circuits: center console at the rear, near the control cabinet • 2 x Schuko 16 A socket: under the control system and on the clamping side from the rear, under a cover • 2 x CEE 16 A socket: on the injection side from the front and on the clamping side • Dual power supply: 1. power supply 3P+N, 400 V, rated current 140 A, preliminary protection gL-gG 160 A • 2. power supply 3P, 400 V, rated current 98 A, preliminary protection gL-gG 100 A

Condition: used, Year of construction: 2010, functionality: limited functionality, BOERE sanding machine. Hnjdpfx Aezlr N Eob Ijt Condition: requires refurbishment. The chain needs to be overhauled, as does the height adjustment mechanism.

Year of construction: 2023, condition: used, The "Rest Wind" machine is an electrically powered winding machine used for the controlled winding of residual materials onto a winding core. The machine is designed to collect material remnants from production or processing operations in a clean and uniform manner. The material is guided through guide rollers and wound onto the winding mandrel. The electric drive enables consistent winding at an adjustable speed. The machine features a control cabinet with start/stop function, main switch, emergency stop, and control indicators. Hjdszr I Azspfx Ab Ient The machine can be inspected in 06502 Thale by appointment.

Condition: good (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: HK06, spindle bore: 48 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 48 rpm, overall weight: 800 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 7 A, WEILER PRAKTIKANT GS Lead and Feed Spindle Lathe Hnodpfx Abszxzmyo Iet - Connection: 5.5 kVA - Distance between centers: approx. 700 mm - Center height above bed: 160 mm - Turning diameter above bed: 320 mm - Center height above cross slide: approx. 100 mm - Turning diameter above cross slide: approx. 200 mm The machine is equipped with a tailstock, a Multifix tool holder, and a quick-change chuck, including a three-axis digital display from the manufacturer FAGOR. FCA D-72589 Westerheim - loaded onto a truck.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 345, type of input current: three-phase, Equipment: documentation/manual, We are offering this very well-maintained Okuma LB200-M-C CNC lathe, year of manufacture unknown. Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Maximum power consumption: 20.5 kVA Total current consumption: 29.6 A Maximum motor current consumption: 47 A Hsdpfxszyfw Ss Ab Isnt Current interruption at: 10 kA Diagram No.: W6200-100-956-5 Serial No.: 0345 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2020, operating hours: 455 h, functionality: fully functional, machine/vehicle number: 1222275, warranty duration: 6 months, total height: 2,085 mm, total width: 1,225 mm, total length: 6,109 mm, type of input current: three-phase, overall weight: 1,570 kg, film width: 700 mm, compressed air connection: 6 bar, input voltage: 400 V, working height: 870 mm, year of last overhaul: 2026, input current: 14 A, Equipment: documentation/manual, safety light barrier, SALES ONLY WITHIN GERMANY AND AUSTRIA!!! The ULMA FM 300 automatic flow-pack machine was specifically developed to package fresh products in multi-layer films under a modified atmosphere (MAP). This machine produces hermetically sealed "pillow-pack" flow packs in a pillow format. Ulma FM 30 The ULMA FM 300 automatic flow-pack machine was specifically developed to package fresh products in multi-layer films under a modified atmosphere (MAP). This machine produces hermetically sealed "pillow-pack" flow packs in a pillow format. Technical Specifications Model: FM 300 Condition: Overhauled 2026 (fully functional) Year of Manufacture: 2020 Performance: Up to 80 packs/minute (depending on film and product characteristics) with MAP. Packaging Type: Flow pack Machine Equipment Infeed conveyor length: Free infeed section 2135 mm Equipment Features ✅ Wash-down infeed conveyor in hygienic design ✅ Motorized film roll holder (max. film width 700mm) ✅ Photo cell for printed film ❌ Label dispenser ❌ Printer ✅ Signal for printer / labeler ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Stainless steel cross-sealing bar with double tooth for mono films ✅ Squeeze sponge for controlling the package volume ✅ "No Product / No Pack" function ✅ Synchronization signals for upstream and downstream equipment ✅ Gas analyzer Dannsensor MAP Check 3 O2 & CO2 gas saver Hodpfszkry Uex Ab Isnt Documentation & Operation Language (Documentation & HMI): German (other languages available upon request) Dimensions & Weight External dimensions (L × W × H): 6,109 × 1,225 × 2,085 mm Shipping weight: 1570 kg (including shipping packaging)

Condition: excellent (used), Olympia belt grinder, view from below, 300 mm wide. Hedpfx Absz Abwas Isnt

Condition: ready for operation (used), functionality: fully functional, Manufacturer: Cosen Hsdpfx Abjz Ap A Ds Ijnt Model: NC4038H Horizontal Dual-Column Band Saw Rectangular Capacity (Height): 401.32 mm Rectangular Capacity (Width): 381 mm

Condition: excellent (used), Year of construction: 2014, Clamping force: 180 t Screw diameter: 35 mm Screw diameter 2: 18 mm Shot volume: 35 cm3 Injection pressure: 1943 bar Distance between tie bars: 630 x 630 mm Platten dimensions: 890 x 890 mm Type: Multicomponent Drive: Electric Hnsdjzyn Eljpfx Ab Iot

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Two-crank mechanical press with a rigid frame structure. Manufactured by: SIMPAC INC., South Korea – 2019. 3-in-1 feeder line TAE IN TECH TNCL-5042 with an unwinder. Pressing force: 300 tons. Maximum pressing point (R.T.P.): 6.0 mm before the lower dead center. Slider stroke: 250 mm. Working speed: 22 – 45 strokes/minute (continuously adjustable with a frequency converter). Maximum die height: 650 mm. Slider adjustment: 120 mm. Work table: 2650 x 1100 mm, thickness 200 mm. Slider: 2350 x 1000 mm. Air pressure: 5 bar. Hodpfxjy Twk Ts Ab Isnt Overall dimensions (L x W x H): 3600 x 2800 x 4650 mm. Machine weight: 50,000 kg. Motor power: 37 kW. Total weight of the line: approximately 56 tons. Total power consumption of the line: approximately 55-60 kW.

Condition: excellent (used), Year of construction: 1985, fuel type: diesel, color: other, 2954 = More information = Hnsdpsymrmbsfx Ab Ist Year of manufacture: Jul 1985 Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Capacity: 300 t Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch Hnjdszxmimspfx Ab Ist - Ram weight balance Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Motor power: 30 HP

Condition: good (used), Year of construction: 2005, machine/vehicle number: 18052, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 15 A, input frequency: 50 Hz, volume flow: 5,800 m³/h, intake vacuum (max.): 38 mbar, suction capacity: 5,800 m³/h, intake manifold diameter: 300 mm, overall weight: 830 kg, Equipment: CE marking, Well-maintained, fully functional dust collector, for sale on behalf of a customer. Location: near Karlstadt. Hnodozd Uixjpfx Ab Iet

Condition: used, Year of construction: 1992, operating hours: 16,862 h, KOMATSU PC 300 NLC-5K * Year of manufacture: 1992 Hjdpfxszhp Nhs Ab Iont * Operating hours: 16,862 h * Undercarriage in good condition * Lehnhoff quick-coupler bucket included * Good condition, ready for operation

Condition: used, Year of construction: 2021, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 505 IE 2021, tank capacity: 300 l, usable tank capacity: 300 l, total length: 1,120 mm, total width: 1,120 mm, total height: 1,000 mm, inner diameter: 900 mm, outer diameter: 1,000 mm, overall weight: 400 kg, wall material: stainless steel, wall thickness: 25 mm, wall structure: double-walled, number of chambers: 1, manhole diameter: 500 mm, manhole location: front, reception height: 500 mm, discharge height: 500 mm, operating temperature: 10 °C, operating pressure: 3 bar, pressure (max.): 2.55 bar, power: 38 kW (51.67 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, The core Thissen & Stecher TSRR series is primarily manufactured as an indirectly heated electric vessel. However, Thissen & Stecher designs for energy input from gas. The specific factory physical and structural dimensions for the TSRR 300-liter core chassis provide the official footprint for this unit: 📐 Structural Dimensions (300L Chassis) Internal Diameter: Ø 900 mm Internal Depth/Height: 500 mm Hnsdpfx Aezzxcwjb Ijt External Width: 1,120 mm External Depth: 1,250 mm External Height: Approx. 1,000 mm to the lip (excluding top-mounted lid clearance/venting arrays). ⚖️ Weight: Net Weight (Empty): The baseline unit weight ranges between 380 kg and 450 kg, depending on the reinforced frame option and agitator configuration. Operating Weight (Full): Approx. 680 kg to 750 kg when loaded to its full 300L liquid capacity. 🔥 Gas Heating & Utility Requirements. Fitted with a gas burner jacket, the unit utilizes an indirect thermal jacket fluid or a direct-fired bottom array. Thermal Power Output: Typically engineered between 38 kW and 44 kW to manage a rapid heat-up curve for a 300L volume. Gas Connection Port: 3/4 inch or 1 inch standard gas line connection. Electrical Supply (For Agitator): Requires a 3-phase 400V / 50Hz connection to power the bottom-driven heavy-duty scraping agitator. ⚙️ Operational Features: Agitator System: Bottom-driven stable agitator with standard stepless speed regulation from 10 to 60 RPM. Tilt Angle: Built with an integrated 5° oblique slope toward the front outlet valve to guarantee smooth product discharge and improved mixing geometry. Controller: Standard integration of the Aditec MIC 900 microprocessor supporting multi-step cooking programs.

Condition: excellent (used), Year of construction: 2007, Battenfeld HM 300/2250S with robot Wittmann W818 / machine in very good technical condition / operating hours: approx. 40.000 h in automatic mode year of construction: 2007 injection unit: screw diameter: 55 mm injection weight: 702.5 g Injection pressure: 2500 bar Metering volume: 772 ccm Clamping unit: Clamping force: 300 t tie bar distance: 710x630 mm size of clamping platens: 1030x1020 mm ejector: hydraulic clamping unit: hydraulic Control: UNILOG B6 - touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 8 Injection unit is wear resistant and resistant to corrosion Proportional valve on the injection unit - precise injection In the machine is installed new original screw and cylinder Hsdpfxszy Ikhs Ab Ijnt Robot Wittmann W818 4-axis, high-speed robot: 3 axes are driven by servo motors (electric); movement A and C Touch control panel Robot with adapter, protective housing Dimensions: Weight: 13000 kg Length/width/height: 6.90x1.90x2.40 m Drive: Pumps/motor: 45 kW Heating power: 22,7 kW Total power: 67,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2024, CNC shearing machine manufactured in 2024. This GEKA HYDRACROP 165/300 SD features a punching power of 165 tons and a maximum capacity of Ø 40 x 30 mm or Ø 34 × 34 mm. It includes five workstations for various operations such as punching, shearing, and notching. If you are looking to get high-quality shearing capabilities, consider the GEKA HYDRACROP 165/300 SD machine we have for sale. Contact us for further details. • Automatic cycles: Universal millimeter back gauge with sensor for automatic cutting Hjdjztc Diopfx Ab Ient • Throat: 610 mm Extended Throat • Pressing force: 500 kN • Height adjustment: Hydraulically adjustable tables at the input and output • Number of cutting heads: 5 workstations included: Punching, Angle shearing, Flat bars shearing, Bars cutting, Notching • Punching Power: 165 Ton • Maximum capacity: Ø 40 x 30 mm or Ø 34 × 34 mm • Shearing of Angles at 90º: 205 x 205 x 18 mm • Shearing of Flat Bars: 750 x 20 mm or 400 x 30 mm • Shearing of Round Bars: 60 mm • Shearing of Square Bars: 60 mm • Rectangular Notching: 90 x 58 x 16 mm • Built-in press brake with upper and lower tool 100 mm • Stop for punching • Including a wide range of dies and accessories

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of manufacture: 2007 Internal machine no.: 26 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Swing diameter over carriage: 410 mm Spindle bore: 72 mm Spindle speed: 45 – 5,000 rpm 2 tool turrets A turret: 12 tool positions (live tooling) B turret: 8 tool positions Equipment: Hodeyyk I Eepfx Ab Ient Tailstock Transformer Touch setter Chip conveyor OneTouch IGF

Condition: good (used), Year of construction: 2000, Degen FSM 300 Surface Grinding Machine High-quality precision surface grinding machine from the renowned German manufacturer Willy Degen, model FSM 300. Hnjdpfjznirijx Ab Ist The machine is characterized by its compact design and extreme precision, making it ideal for tool and mold making. It is perfect for workshops with limited space that refuse to compromise on accuracy. Extensive accessories & highlights included: Digital Readout (DRO): For precise operation and error-free infeed. Original extraction & wet grinding unit: Ready for immediate connection, ensuring a clean working environment and optimal workpiece cooling. Magnetic chuck: Pre-installed for immediate operation. Technical specifications (according to nameplate): Manufacturer: Willy Degen (Schömberg) Type: FSM 300 Machine No.: 1309 Year of manufacture: 2000 Power supply: 400 V / 50 Hz (three-phase) Power rating: 2.7 kVA / 5.6 A Control voltage: 24 V (secondary) "A complete solution from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 1995, CNC Wire EDM Machine AGIE AGIECUT 270 SF+F HSS Year of manufacture: 1995 Travel in X-axis: 350 mm Travel in Y-axis: 250 mm Travel in Z-axis: 256 mm Travel in U/V axes: ±70 mm Positioning resolution: 0.0001 mm Positioning accuracy: approx. ±3 µm Machining data Max. taper: 30° at a workpiece height of 100 mm Surface finish: up to approx. Ra 0.2 µm with multiple finishing passes Workpiece data Workpiece size, max. dimensions: 750 × 550 × 250 mm Workpiece weight, max.: 450 kg Wire system Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Wire tension: CNC-controlled MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Hnodpfxszzyhne Ab Ist Dimensions & Weight Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Machine weight: approx. 3,600 kg EQUIPMENT Fully automatic wire threading

Condition: good (used), Year of construction: 1995, NC sinker EDM machine AGIE AGIETRON INTEGRAL 2 Year of manufacture: 1995 Travel in X: 350 mm Travel in Y: 250 mm Travel in Z: 350 mm Rapid traverse: approx. 720 mm/min Axes: 4 (X, Y, Z, C) Work area Table size: 600 × 450 mm Maximum workpiece dimensions: approx. 860 × 620 × 350 mm Maximum workpiece weight: 400 kg Maximum electrode weight: 100 kg Internal dimensions of the work tank: approx. 830 × 590 × 350 mm Distance from table to quill: 170 – 520 mm MACHINE DETAILS Control: AGIEMATIC T Generator: AGIEPULS 60 Hodpfx Ajzzyhuob Isnt Power connection: 400 V / 50 Hz Dimensions & Weight Dimensions (L x W x H): approx. 3,000 × 1,700 × 2,580 mm Machine weight: approx. 2,550 kg

Condition: used, Year of construction: 2005, FANUC 160 I-MB control Hnsdpfjfxgiyex Ab Iot KNOLL chip conveyor, type 1200 S-2, made in 2012 4 workstations

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: ML0336-000164, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 51 mm, controller model: Siemens S828D, TECHNICAL DETAILS Main spindle speed: max. 6,000 rpm Travel in X-axis: 205 mm Travel in Z-axis: 560 mm Rapid traverse in X-axis: 30 m/min Rapid traverse in Z-axis: 36 m/min Swinging diameter over bed / turret: 600 / 400 mm Torque: 127 Nm Hydraulic 3-jaw chuck: 170 mm Workpiece size: max. Ø 300 × 510 mm Bar diameter: max. 51 mm Chuck outer diameter: 152 mm Tool stations: 12 Tool cross-section: 20 × 20 mm Tools: max. 24 Turret indexing time: 0.11 s MACHINE DETAILS Control model: Siemens S828D Main motor power: 12.6 kW Power of driven tools: 6.2 kW High-pressure coolant pressure: 0.7 MPa Dimensions & Weight Machine dimensions (L × W × H): 2,540 × 1,595 × 1,693 mm Machine weight: 3,480 kg EQUIPMENT High-pressure coolant system, 0.7 MPa Transformer Chip conveyor Tool measurement / tool probe Collet chuck with 3 collets LNS bar feeder for bars up to max. 1.5 m in length Workpiece catcher and part ejection system Tool load monitoring CE conformity Highly rigid cast iron machine bed 12-position tool turret with accommodation for max. 24 tools Automatic bar feeder Oil separator for the coolant Roller-guided linear guides Documentation/Manual Spindle speed infinitely adjustable Hnjdpfx Ajzzx Igeb Ist

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, power: 132 kW (179.47 HP), Drum chipper, Rudnik & Enners. Type TH 250-300/650/5 Drive motor 132 kW Infeed height 300 mm Lower infeed rollers: 3 pcs. Upper infeed rollers: 2 pcs. Including vibrating screen, 8 m long, with drive, overhauled; 1 screen, 7.5 m long, and 1 screen, 10 m long, not overhauled. Metal detector. The machine has been out of service since 2014 and has been completely overhauled. Hedpsy R Nblefx Ab Ijnt Ready for immediate use. Control system available.

Condition: excellent (used), Year of construction: 2011, operating hours: 85,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 75 mm, clearance between the columns: 710 mm, column diameter: 105 mm, injection pressure: 1,555 bar, mold height (min.): 350 mm, ejector force: 59 N, ejector stroke: 200 mm, opening stroke: 800 mm, heating capacity: 31.3 kW (42.56 HP), Equipment: USB port, documentation/manual, OPPORTUNITY Press ready for use, in very good condition, Euromap 67, 4 hydraulic cylinders, hot runner system for the mold with 12 zones included. All details are visible in the photos. Hjdeww D Rnspfx Ab Ijnt