Used Sinucraft Sinugrind 3000 for sale (4,646)

Condition: good (used), Premixer, manufacturer Falterbaum, type: Famix 3000, for 3,000 l/h, 2-component (water + syrup + CO2), with 2 stainless steel tanks, dosing pump and 2 additional pumps, with control cabinet, mounted on base frame. Dimensions: L: 1,400 mm, W: 1,100 mm, H: 2,200 mm. Ppsdpfxoyzgato Akror

Condition: used, mileage: 8,52,923 km, power: 324 kW (440.52 HP), first registration: 05/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 26.440 6x4 | Crane with new UVV inspection | Well maintained & ready for operation | Few crane hours This MAN TGS 26.440 is in excellent technical and visual condition. The crane comes with a new UVV safety inspection, the rear axle tires are new, and the vehicle has been fully serviced. Clean appearance, runs flawlessly – immediately ready for use. Highlights: * HMF 3000-K5 loading crane * New TÜV inspection * 440 HP, 6x4 drive * Crane unit with current UVV inspection * New rear axle tires Ppedpfx Asxxfl Tskror * Technically overhauled * Very well-maintained interior and exterior * Long-distance driver’s cab with 2 sleeper bunks * Air-suspended driver’s seat * Multifunction steering wheel * Air-suspended driver’s seat * Auxiliary heating/air conditioning * Extendable refrigerator compartment * Radio * Navigation system * Stationary air conditioning * Electrically operated mirrors and windows * Air horns * HMF 3000-K5 loading crane * Radio remote control For further information, please feel free to contact us.

Condition: used, mileage: 8,52,923 km, power: 324 kW (440.52 HP), first registration: 05/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 26.440 6x4 | Crane with new safety inspection (UVV) | Top condition & ready for immediate use | Low crane hours This MAN TGS 26.440 is in excellent technical and visual condition. The crane has a new UVV inspection, the rear axle tires are new, and the vehicle has been fully serviced. Clean appearance, runs flawlessly – ready for immediate use. Highlights: Ppodpfxsxul Ere Akrjr - HMF 3000-K5 loading crane - New TÜV inspection - 440 HP, 6x4 drive - Crane system with current UVV inspection - New rear axle tires - Technically overhauled - Very well-maintained interior and exterior - Long-haul driver’s cab with 2 bunks - Air-suspended driver’s seat - Multifunction steering wheel - Air-suspended driver’s seat - Auxiliary heating/air conditioning - Extendable refrigerator compartment - Radio - Navigation system - Stationary air conditioning unit - Electrically operated mirrors and windows - Air horns - HMF 3000-K5 loading crane - Radio remote control For further information, please feel free to contact us.

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 3000 X 1250 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Self weight 1200kg. Podpfx Aokd Drhokrepr Glue spreading machine LISY DVORAK NL200 included in price. Very good condition. Available immediately.

Condition: used, Year of construction: 2006, operating hours: 27,000 h, functionality: limited functionality, input voltage: 400 V, control voltage: 24 V, compressed air connection: 7 bar, input frequency: 50 Hz, punching force: 17 t, We are offering this used automatic punching machine TRUMPF TRUMATIC 3000 L, Psdpfx Aeyw Nwyskropr

Condition: good (used), CSF Fryer Podpfexr Rugox Akrepr Model BRN 3000 / 500 Terminal fluid heating system In everyday use

Year of construction: 2024, condition: new, Ease up your production with a Wattsan CW cleaning machine, continuous and with water-cooling. It can remove rust, paintwork, oil products, oxide coatings, welding scales, and carbon deposits from a variety of metals. This model features 1 type of cleaning seam. There are no consumables and no need for a significant amount of necessary space. Compact, portable laser cleaner that can work at any angle and in the most inaccessible places. The chiller is also built-in. The fiber length is 8 meters. The laser gun is lightweight and comfortable for long-term use. Ppjdpfxsiicgkj Akrsr You can give our managers a call for additional details! Wattsan CW Cleaning machine characteristics: Cooling: water Laser power: 1000-3000 W Machine size: 880*560*1010 mm Laser source: JPT / Raycus Weight: 145 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Parallel Lathe SCULFORT MAXICAP type 315-3000 R Pedeyz Aw Uspfx Akrjpr Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Spindle diameter: Ø 71 mm Rotation: from 20 to 1300 RPM Square turret GOODSHAPE 3-jaws chuck Ø 380 mm Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T

Condition: used, Year of construction: 2007, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 750 mm, number of axes: 5, number of slots in tool magazine: 12, total height: 2,700 mm, total length: 5,000 mm, total width: 4,000 mm, overall weight: 4,400 kg, table length: 4,000 mm, table width: 1,300 mm, Equipment: documentation/manual, We offer this used SAHOS FC 3000 CNC-RAPID 5-axis machining center, year of manufacture 2007. Table size: 4000 x 1300 mm Travel (X axis): 3000 mm Travel (Y axis): 1600 mm Travel (Z axis): 750 mm Max. feed rate X/Y/Z: 40/40/20 Machine working dimensions: 5000*4000*2700 mm Weight: 4400 kg 32A 400V 50/60 Hz Podpfxoyxz Uys Akrjpr Spindle power: 3.5–13.5 kW Compressed air consumption: 250 l/min Regularly serviced, in operation, fully functional, available for inspection under power. If you have any questions or need further information, feel free to send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, For sale: Losman air cleaning units in excellent condition, suitable for applications such as removing oil mist generated in metalworking. The cleaned air is returned to the workspace, and the condensed coolant collected during filtration can be recycled. There are 2 units available, one of which is from 2014. Both units have had their filters replaced. Psdpfx Aksyk Sknorepr

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: sinumerik 840d, _____ Description: Year of manuf. : 2020 Accuracy : 0,015 mm Technical specifications Axis travel range:X 800 mm, Y 600 mm, Z 400 mm Workpiece machining:CutLine Professional 2D Machining:2D Cutting head camera:available Dimensions:3300 x 1600 x 2200 Axis speed:50 m/min Podpfx Akjyr Uiiorepr Max. axis acceleration:10m/s² Positioning accuracy:0.015mm Equipment :-Variable clamping system :-Teach panel :-TruDisk 3000 :-Cutting optics adjustment device :-Automation interface

Year of construction: 2019, operating hours: 20 h, condition: like new (used), functionality: fully functional, machine/vehicle number: Sn, Oxylog 3000+ Emergency and Transport Ventilator incl. Mount – Excellent Condition Description: For sale is an Oxylog 3000+ emergency and transport ventilator, including a mounting bracket. The unit has had very limited use and is in excellent, fully functional condition. It is ideally suited for use in emergency medical services, hospitals, or for medical transport. Features / Details: - Oxylog 3000+ (Dräger) - Includes sturdy mounting bracket - Compact and robust transport ventilator - Suitable for pre-hospital and clinical applications - Intuitive operation and reliable technology Condition: Ppodjyy Unvepfx Akrer Lightly used, technically and visually in very good condition Scope of delivery: - Oxylog 3000+ - Mounting bracket - (optionally add: tubing system, power supply, battery, accessories if available) Price: Negotiable (OBO) Location: Ehrwald, Tyrol (Austria) Miscellaneous: Viewing by appointment. Shipping available upon request.

Condition: excellent (used), Trumpf Type: TruPrint 3000 G02 The machine is in very good condition and has been professionally tested for functionality by a TRUMPF technician at our facility. We provide a 6-week warranty on the machine. Year of manufacture: 11/2017 Ppsdjvvl I Tspfx Akrer Beam-on hours: 17,731 Laser Metal Fusion Machine (Metal 3D Printer) Flexible solution for industrial additive manufacturing. The TruPrint 3000 is a universal mid-format machine (LMF / PBF / LPBF) with industrial-grade part and powder management. From now on, you benefit from even greater flexibility, quality, and productivity for your additive serial production: Productivity is nearly doubled, independent of part geometry, and part costs are significantly reduced. Automatic monitoring and calibration of the multi-laser system during the build job ensures optimal quality for printed multi-laser parts. The latest advancements in shielding gas guidance further improve part quality and reproducibility. This is documented in parallel with the build job via Melt Pool Monitoring, allowing compliance with requirements such as those in the medical sector. Highly flexible, the TruPrint 3000 can be adapted to your specific requirements. With a build volume of 300 mm diameter and 400 mm height, it can be used across a wide variety of industries. Depending on the size and complexity of the parts, your workflow preferences, and production volumes, you can flexibly choose between internal or external unpacking—all under inert gas. External unpacking further minimizes the 3D printer’s downtime via simultaneous main-time operations. Technical specifications: TruPrint 3000 Build volume (cylinder): 300 mm diameter x 400 mm height Processable materials: Weldable metals in powder form, such as stainless steels, tool steels, aluminum, nickel-base, cobalt-chrome, copper, titanium or precious metal alloys. Current materials and parameter availability on request. Preheating (standard): up to 200°C Maximum laser power at the workpiece (TRUMPF fiber laser): 500 W Laser spot diameter: 100 - 500 μm Layer thickness (adjustable): 20 - 150 μm Scan speed (powder bed): 3 m/s Build rate: 5 - 60 cm³/h Connections and consumption: Electrical connection (voltage): 400/460 V Electrical connection (current): 32 A Electrical connection (frequency): 50/60 Hz Shielding gas: Nitrogen, Argon Design: Dimensions (incl. filter) (W x H x D): 3385 mm x 1435 mm x 2225 mm Weight (incl. powder): 4300 kg The system has been dismantled by the manufacturer, with disassembly records and function logs available. All axes are professionally secured. The system has been used with materials 1.44.04 and most recently with AlSi10Mg. Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data and listed specifications reserved!) We will be happy to answer additional questions by phone.

Condition: ready for operation (used), Year of construction: 2011, Main Drive Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 22 kW Movement X-Axis Movement 260 mm Z-Axis Movement 1010 mm Y-Axis Movement 120 mm Pjdpfxex Imqfo Akrspr Technical Specification Driven Tools yes This 3-axis Okuma LB 3000 EX turn-mill centre was manufactured in 2011. It features a maximum turning diameter of 340 mm, a turning length of 950 mm, and a spindle speed up to 5,000 rpm. The machine includes a 12-position tool turret and supports driven tool speeds up to 6,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma LB 3000 EX machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, control type: manual, degree of automation: manual, actuation type: manual, coil inner diameter: 370 mm, coil outer diameter: 430 mm, coil weight: 2,000 kg, coil width: 3,000 mm, -Double band decoiler with a disk; -3000 mm max coil width (when using 1 coil); -Loading up to 2000 kg max coil; -Dimensions shown in picture; -Barely used (did not fit our use case); Ppsdjx Nf R Hjpfx Akrsr -We can arrange transportation to any European Union country at buyers costs;

Condition: new, Year of construction: 2025, Hand-held laser welding machine Fiber Innovation Laser Laser power: 1500W - 3000W 2-year warranty. Warranty and post-warranty service included. Stock of spare parts and consumables maintained. From order to commissioning in as little as 5 working days. The hand-held fiber laser welder is a modern alternative to TIG and MIG/MAG welding, designed for both thin and thick materials. Compared to conventional methods, laser welding delivers up to 4x faster cycle times, significantly reduced heat distortion, and welds that require no additional post-processing. Welding thin aluminium and stainless steel is straightforward and repeatable — unlike TIG, which demands a highly experienced operator. The machine supports single or dual wire feeding, enabling larger gap bridging and a wider weld bead when needed. Technical parameters (1500W / 2000W / 3000W): - Laser wavelength: 1070 nm +/-10 nm - Maximum power consumption: 8 kW / 10 kW / 13 kW - Cooling system: water-based - Operating voltage: 400V 16A / 400V 32A / 400V 63A - Penetration depth: 0.2-2 mm / 0.2-3 mm / 0.2-4 mm - Dimensions: 1000 x 450 x 750 mm - Weight: 80 kg / 90 kg / 100 kg The price includes: - Integrated water cooling system - Raycus laser source - Touch screen with Polish-language menu - Ergonomic plastic welding head - Single / dual wire feeder (optional) - Instruction manual in Polish\English - CE Declaration of Conformity Podpot Al Txefx Akrjpr Weld samples can be produced on request for the customer's specific workpiece material. Machines are available in various configurations, working ranges and laser power outputs. The listed price applies to the CX-CS1500-H (1.5 kW) model with single wire feeder. Actual appearance of individual components may differ from images shown.

Condition: excellent (used), Year of construction: 2014, Axle 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A - axis 360 degrees Minimum dimension: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. bottom depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Pedpefmdcqsfx Akrjpr Required extraction capacity: 2300 m3/h Location: comes to warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Ppodsh U Rznjpfx Akrer Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: excellent (used), functionality: fully functional, control type: NC control, actuation type: hydraulic, controller manufacturer: ESA, working width: 3,050 mm, sheet thickness (max.): 4 mm, back gauge adjustment: motor-driven, type of input current: three-phase, Equipment: emergency stop, finger protection, foot remote control, type plate available, OLEOTECNICA hydraulic guillotine shear Working cutting length: 3050 mm Maximum cutting thickness: 4 mm ESA programmer for dimension display Motorized backgauge Safety guards. Ppsdpoyqwhfjfx Akrjr

Condition: used, functionality: fully functional, Precise Defect Identification The Optyx sorting platforms are characterized by exceptional color, shape, size and texture recognition. High resolution Vis/IR, Tri-chromatic, or UV cameras ensure even the subtlest defects are identified and targeted for removal increasing quality. Precise Removal of Defects and Foreign Material The intelligent ejection system features precision pneumatic-based valves with exceptional response time for pinpoint accuracy. Unparalleled yield improvement can be achieved with the optional three-way sorting. Intelligent Sorting Advanced object-based image processing allows FMAlert™ to track foreign material providing you with a digital record. Custom algorithms determine shape, length, width, curvature, symmetry, circularity and other special characteristics improving quality. Using cameras, Optyx recognizes the size and shape of each object, as well as millions of subtle color differences. As the product passes through the sorter, it inspects it from above while on the conveyor belt. The product is then moved to the end of the Optyx conveyor for an overhead view from below. Using proprietary image processing technology designed specifically for dates, the sorter quickly analyzes the images, comparing each item to previously defined standards as accepted or rejected. When the sorter identifies objects to separate from the main product section, it activates the ejector system, comprised of a series of air valves that reach the full width of the system. As the air is expelled, the valves identify each object to be separated and removed from the main product section. Features & Benefits • Multiple camera configurations to match product requirements • High Resolution Vis/IR, UV or Tri-chromatic camera options • HID, UV, & LED lighting options • Simple, user-friendly operation, cleaning and maintenance • Easy adjustment for product change over • Wet or dry products. Typical Applications Potatoes (chips, whole, strips, sliced, diced, wedges), fruits, nuts, vegetables, cereal, confectionery, dry beans, fresh-cut (including core removal), raisins, snack foods, wet or dry products. Sorting Excellence Green bean processors use an Optyx 3000 to re-sort the defect streams of other sorters to increase yields. Output. 6 TN metric/H = 13,000 lbs/h = 5,896 kg/h. Production may vary depending on the product. Ppodpfx Aownxupskrjr Work measures: Long tape: 2.20 m. Tape width: 0.66 m Download: 1.22 m.

Condition: like new (used), Year of construction: 2009, operating hours: 20,929 h, functionality: fully functional, machine/vehicle number: 23500, travel distance X-axis: 3,320 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller model: Heidenhain, table width: 3,400 mm, table length: 700 mm, spindle speed (min.): 10,000 rpm, spindle speed (max.): 24,000 rpm, operating hours of spindle: 20,929 h, input voltage: 230 V, We are selling the machine because we need to free up space in the factory. CNC Machining Centre TVMC-3000 (L) Table: up to 3400 × 700 mm (maximum load 4,000 kg). Travel X/Y/Z: up to 3320 × 710 × 610 mm. Spindle: BT40 taper, speed up to 14,000 RPM. Automatic tool changer: 24 positions. Rapid traverse: up to 30 m/min. Precision: positioning ±0.005 mm / 300 mm. Pedpfx Aksyt Np Terepr CNC control available: Heidenhain.

Condition: used, maximum load weight: 18,490 kg, overall weight: 25,000 kg, axle configuration: 1 axle, first registration: 09/2018, next inspection (TÜV): 09/2026, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2018, 1-AXLE CITY PLAYWOOD HERTOGHS GALVANIZED CHASSIS 3-TON REAR DOOR ROOF CONDITION Construction: Plywood body with hardwood floor Chassis manufacturer: System, fully galvanized Body manufacturer: Hertoghs Tail lift: Dhollandia rear tailgate with 3,000 kg load capacity and closing mechanism Date of first registration: MOT valid until: ? 2026 Dimensions (L x W x H) INTERNAL: 795 x 250 x 270 cm Dimensions (L x W x H) EXTERNAL: 823 x 255 x 400 cm Unladen weight: 6,510 kg Payload: 18,490 kg Gross vehicle weight: 25,000 kg Suspension: Air suspension Axle configuration: Number of axles: 1 Axle brand: SAF with disc brakes Tire size: 275/70 R22.5 twin tires Steering axle: Yes, Tridec rod steering system Rear axle 1: tread depth left outer: 80%, tread depth right outer: 80% Additional equipment: ABS, EBS, fully galvanized chassis, SAF axle with disc brakes, Tridec rod-steered axle, plywood body with hardwood floor by Hertoghs, central lubrication, 2 horizontal lashing rails, stainless steel rear bumper integrated into body, 3,000 kg Dhollandia tail lift, special batteries, Rehama EN Clang connector, immediately available and ready for operation. For further information, please contact us at any time by phone or email. UNIQUE CITY TRAILER IN TOP CONDITION IDEAL FOR TRACTOR/TRAILER FLEETS WITH A SHORTAGE OF BOX TRAILERS IMMEDIATELY AVAILABLE AND READY TO OPERATE Further information: * Unladen weight: 6,510 kg Ppodpfx Aeyzwbbskrsr * Type | 1st axle: Continental R * Tire size | 1st axle: 275/70 R22.5 * Tire tread depth left outer | 1st axle: 80% * Tire tread depth left inner | 1st axle: 80% * Tire tread depth right outer | 1st axle: 80% * Tire tread depth right inner | 1st axle: 80% * Maximum axle load | 1st axle: 10,000 kg * Price on request: Yes * Position | 1st axle: Rear * Brand | 1st axle: Other * Brake type | 1st axle: Disc brakes * Suspension | 1st axle: Air suspension * Twin wheels | 1st axle: Yes Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance about costs and procedures for your specific country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to change, prior sale, and errors

Condition: like new (used), Year of construction: 2016, operating hours: 31,881 h, grinding length: 3,350 mm, total width: 3,600 mm, total length: 9,400 mm, total height: 2,000 mm, grinding diameter: 595 mm, distance between centers: 3,000 mm, Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm): 85 Maximum taper correction (mm): ±0.1 Equipment Tailstock diamond dresser with diamond holder Diamond Grinding wheel guards according to ISO, OSHA, and UNE standard +Two-door enclosure Paper feeder and magnetic separator Grinding wheel balancing shaft MARPOSS electrodynamic balancer Grinding wheel safety sensor Touch-type axial positioner with T25 probe Grinding wheel chuck Driving dog sets Basic machine dimensions / weight Length (mm): 9400 Width (mm): 3600 Height (mm): 2000 Weight (kg): 15000 Air or water through spindle center DXF import function Spindle 2, workpiece unloader Working time hours Under power: 31881 Ppjdpfxoyudtpe Akrjr Spindle 1: 8860 Spindle 2: 9774 Rated power kVA: 61 Basic machine dimensions / weight Length mm: 4200 Width mm: 2600 Height mm: 2586 Weight kg: 15000

Year of construction: 2026, condition: excellent (used), Field roller, grassland roller, meadow roller, soil roller, roller -Meadow roller: Diameter: 1200 mm -Pipe wall thickness: 18 mm Features: Water-fillable, with scraper, warning signs -Total width: 3000 mm -Working width: 2650 mm Pedpetlzdbjfx Akropr -Bearings: Polyamide bushings -Weight when filled: approx. 5,000 kg -Unladen weight: 2,200 kg

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 5,000 kg, Column lift turning device 5000 kg, 3000, 1000 load capacity Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of construction 2024 Load capacity 5000 kg Minimum working height: 1100 mm Maximum working height 1600 mm Speed 0.5 rpm Vertical adjustment 500 mm Clamping plate diameter 1000 mm Rotation 2.2 kW Lifting motor 2 x 2.2 kW Ppedpfxjuk Niyj Akrer Various column lifting and turning devices are available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote