Used Soldering Bath for sale (533)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PSP-26001, pressure: 0.4 bar, total width: 500 mm, total length: 500 mm, total height: 1,950 mm, overall weight: 75 kg, warranty duration: 3 months, manhole location: bottom, empty load weight: 50 kg, input voltage: 230 V, machine base height: 250 mm, type of input current: AC, volume flow: 0.15 m³/h, Equipment: documentation/manual, type plate available, Continuous-flow pasteurizer (throughput volumes depend on operating time, hygiene, and precision): • Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours. • Base of 50x50cm, 200cm high. Removable side guards. • Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station. • A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation. • Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process. • No contact with air: Hygienic and precise processing! • Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C). • The basic pasteurizer consists of: 1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C), 2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates, 3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature, 4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot, 5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time), 6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product. 2. Transfer pump with controls: • Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor. • Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops. • Performance between 8 and 25 liters per minute (depending on the height difference). • Also ensures powerful cleaning of the entire pasteurization circuit. • Food-grade design and materials. • Electrical consumption of 400 W. Rodozg Dlbjpfx Abhew • Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content. 3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!

Condition: new, Year of construction: 2025, Heavy-duty, solid cast-iron construction High running smoothness due to ground, oil-bath lubricated gears Right-hand/left-hand operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant system Machine lamp Gear head can be swiveled ± 60° Adjustable wedge strips Solid dovetail guide for the column, hand-scraped, for maximum stability and precision Height-adjustable, large-sized protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling/tapping function Solid and large-sized cross table, precisely surface-finished with T-slots and adjustable wedge strips Solid machine base made of cast iron with chip collection groove Single-stage, high-quality industrial electric motor Large speed range of 60 - 2,760 rpm through 2 continuously adjustable speeds Dimensions and weights Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/Milling performance Arbor size max. 63 mm Shell mill size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Connection voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Milling table, horizontal Length 800 mm Width 240 mm Distance Vertical spindle - Milling table max. 420 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-axis manual 560 mm Y-axis manual 195 mm Z-axis manual 350 mm X-axis automatic 480 mm Vertical spindle Overhang 258 mm Spindle mount MK 4 Speed range 60 – 2760 rpm Number of speed ranges 2 Rsdpfxsg U Uv Ue Abhjw Speed control Steuerung der Drehzahlregelung electronic Draw bar M 16 Swivel range milling head Z - X plane ± 45 ° Quill diameter 75 mm Quill stroke 120 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: used, Technical details: Heating: 15 kW rated current: 28 A Heating capacity: 15 kW current: max.71 A cooling water consumption: 11 l/min frequency range: 10-25 kHz frequency range: 50/60 voltage: 400-480 +-10% V Redpfxoxfvldo Abhew current- max.: 3020 A weight: 406 kg dimensions L x W x H: 1,25 x 0,8 x 1,6 m The device is a mobile induction heater with medium power (15 kW), suitable for: Local heating of metals (e.g., bearings, bolts, screws, pipes, sheet metal edges). Preheating for welding processes Soldering and shrinking applications Heat treatments (e.g., tempering or hardening of smaller components). Due to its frequency range of 10–25 kHz, the device is more suitable for medium to large workpieces, as the penetration depth at these frequencies is higher than with high-frequency systems. *

Condition: good (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Purchase price EUR 1.550.000 Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Steady rest clamping range: 70-425 mm Turning, drilling, milling head Front diameter: Bearing 110mm Interface HSK100/C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Rjdpfx Abezaz Egohew Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Rjdpfxowty H De Abhjw Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Year of construction: 1982, functionality: fully functional, year of last overhaul: 2002, type of input current: three-phase, For high-temperature dyeing of fabrics (e.g. polyester, mixed fiber materials) Type: COMBY-JIGGER JP70. Rjdpfxefqmx Te Abhjw Year of manufacture: 1982. Max. temperature: 140–144 °C Pressure: approx. 3 bar (3 kg/cm²) Heating: steam heated Bath volume: 9170 liters Material capacity: approx. 300 kg (typical) Useful working width: 2000 mm Fabric roll diameter: 1100 mm Cylinder diameter: 324 mm 2 main driven cylinders (reciprocating) Dosing system (for chemicals) Additive tank Automatic program control Temperature and pH control

Condition: used, mileage: 15,634 km, power: 229 kW (311.35 HP), gearing type: mechanical, fuel type: diesel, color: yellow, overall weight: 23,200 kg, empty load weight: 23,200 kg, maximum load weight: 15,000 kg, axle configuration: 4x4, number of seats: 1, first registration: 03/2016, brakes: engine braking, Year of construction: 2016, operating hours: 15,634 h, driver cabin: day cab, Equipment: additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, head guard, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, standard shovel, * German vehicle * Wheel loader test according to §14 completely available * Condition, see photos * original ONLY 15,634 BH * Driver's cab rollover protection ROPS / stone chip protection FOPS * ROPS/FOPS meet the requirements of the standards ISO 3471:2008 and ISO 3449:2005 Level II * Turning circle (diameter) (counterweight) 6,804 mm * Small turning circle due to articulated steering * Fuel tank 302 liters * Axles, front axle with manually operated differential lock, rear axle with open differential * Brakes, fully hydraulically encapsulated oil bath disc brakes with integral braking system (IBS) * Planetary powershift transmission (4V/4R), automatic * Detect technologies: rear view camera Cat rear object detection * Immobilizer * Air conditioning, heating and defroster (automatic temperature control and fan control) * Driver's cab with pressurized ventilation and sound insulation (ROPS/FOPS) * Electro-hydraulic control levers, single-axle lever for lifting and tilting function * Electro-hydraulic parking brake * Ergonomic ladders and handrails for cabin access * Warning horn, electric * External rear-view mirror with integrated blind spot mirrors * Multifunctional 18 cm color touchscreen display for image display of the rear view camera, time and machine parameters * Radio including antenna, loudspeaker * Seat with fabric cover, air-suspended * Steering joystick, electro-hydraulic, speed-dependent with force feedback * Sliding window (left and right) * Reverse warning signal Rsdovzav Nopfx Abhjw * Fender, sheet steel, front with mud flap and rear with extension * Engine hood (plastic) with electric tilting device * Sight glasses: engine coolant, hydraulic oil and transmission oil level * Working hydraulic pump type adjustable piston * ? Maximum travel speed of the standard machine with empty bucket and standard tires (L3) with a rolling radius of 826 mm. * Speed with gears: Forward 1 6.5 km/h Forward 2 13.0 km/h Forward 3 23.5 km/h Forward 4 39.5 km/h Reverse 1 7.1 km/h Reverse 2 14.4 km/h Reverse 3 25.9 km/h Reverse 4 39.5 km/h * Operating weight 23,220 kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: new, Maximum turning height: 250 mm Turning diameter over slide: 350 mm Turning diameter in the curve: 695 mm Distance between centers: 1500 mm Spindle nose: DIN 55029, cam lock, size 6 Rodpfjgt E Iljx Abhsw Bed width: 305 mm Cross slide travel: 272 mm Top slide travel: 155 mm Spindle bore: 80 mm Speed range, stepless: (3) 30 - 2200 rpm Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14 mm Diametral threads: (21) 8 - 44 D.P.I Module threads: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/rev Cross feeds: 0.02 - 0.50 mm/rev Motor power: 5.5 kW Dimensions L x W x H, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Features: - Toolmaker's precision - Stepless speed control (3 pre-selected stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guideways - One-piece cast iron base - Adjustable precision tapered roller bearings in the main spindle - Easy-to-operate feed drive with a large feed range, running in a closed oil bath. - Low-maintenance central lubrication system - Removable bridge - CE Equipment: - 3-axis digital display (resolution 0.005 mm) - Frequency inverter - Machine stand with a high splash guard and integrated lighting - Chip tray that can be pulled out to the front - 3-jaw chuck - Fixed steady rest - Traveling steady rest - Micrometer bed stop - Oil cooler - Two emergency stop push buttons and a foot pedal with an electrical braking system - End-switch protected chuck guard, tool holder guard, and cover for the lead and feed screw according to European safety standards CE - Coolant system - Fixed center - Reduction sleeve for the main spindle - Operating tools in a toolbox

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, total length: 2,100 mm, total width: 730 mm, heating capacity: 7.5 kW (10.20 HP), screw conveyor diameter: 35 mm, machine/vehicle number: DE27307, TECHNICAL DETAILS Capacity: 30 – 80 kg/h Screw diameter: 2 x 35.0 mm L/D ratio: 20:1 Screw speed: 80 rpm Gearbox ratio: 12:1 Number of heating zones: 5 Heating power: 7,500 W Number of cooling fans: 5 Extruder discharge height: 1,150 mm Rsdpfx Aezargnobhjw MACHINE DETAILS Control system: Analog, contactor-controlled system Drive / Motor: 20 kW (DC) Cooling fan connection: 230 V Gearbox type: Lenze Material: PE, PP, PS, ABS Design: Co-rotating, degassing, vacuum pump Dimensions (L x W): 2,100 x 730 mm Note: Water bath and granulator can be purchased for an additional charge.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2026, total height: 290 mm, total length: 480 mm, total width: 540 mm, type of input current: AC, overall weight: 35 kg, control voltage: 220 V, DGUV certified until: 07/2027, Temperature control unit TG 1 Chocolate melting device with container simple technology water bath heating tabletop unit, stainless steel design DGUV V3 tested – available only from us connection: 230V, ready for plug-in device dimensions approx.: 540 x 480 x 290 mm, W x D x H used device, cleaned & SAB tested Redpfxst U Uyfj Abhsw Many more devices in stock!

Condition: good (used), Sumbel Herold 500 Gluing Machine This machine is like new, fully functional and ready for production. This is the most valued brand among small laminating machines. Redpfxoy Rdzae Abhsw Ideal for producing covers, decorative packaging, and more. Made in Germany. The machine operates on hot glue. It features a built-in heating plate and a water bath. Brass rollers. Infinitely adjustable: glue thickness, gap width, and speed. Working width: 500mm Power supply: 380V Weight: 60kg

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 830397, functionality: fully functional, power: 85 kW (115.57 HP), temperature: 1,000 °C, inner dimension length: 1,600 mm, inner dimension width: 700 mm, inner dimension height: 950 mm, The item is offered as a "Premium Listing" – the sale is qualified and curated by Maschinensucher. Used in a large German corporation, adhering to applicable guidelines and maintenance recommendations. ACQUISITION COSTS Original purchase price in 2008: €490,000 plus VAT Retrofit in 2022: €254,000 plus VAT TECHNICAL DETAILS Dimensions of the heat treatment unit Housing width, including control cabinet: 3,600 mm Rjdpey Uxt Eefx Abhsw Overall length with attachments: 7,000 mm Height above furnace floor: 4,900 mm Loading height above furnace floor: 1,200 mm Pit depth: 630 mm Internal height of the furnace chamber: 950 mm Internal depth of the furnace chamber: 1,600 mm Internal width of the furnace chamber: 700 mm Temperatures Rated furnace temperature: 1,000 °C Operating furnace temperature: 850 °C Oil bath temperature: 60 °C Dimensions of the furnace control cabinet Width: 2,000 mm Depth: 600 mm Height with 100 mm base: 2,100 mm Weights and Volumes Weight of multi-purpose chamber furnace: 22,000 kg Oil bath volume: 7.5 m³ Weight of switchgear: 600 kg Total weight of furnace with oil and charge: 30,000 kg Energy Data Total connected load: 85 kVA Supply voltage: 400 V Supply frequency: 50 Hz Number of phases: 3 Oil bath heating: 2 x 21.6 kW Motor power, heating chamber circulation fan: 5.5 kW Motor power, pre-chamber circulation fan: 2.2 kW Motor power, oil bath air cooler: 3.0 kW Motor power, lifting table: 11 kW Motor power, loading machine: max. 38 kW Current draw, pre-chamber door: max. 17.2 A Current draw, heating chamber door: max. 13.2 A Motor power, combustion air fan: 1.5 kW Motor power, oil bath pump for oil bath: 2.2 kW Motor power, cooling air blower: 0.75 kW Motor power, oil bath circulation fan: 2 x max. 11 kW Motor power, oil bath pump for cooling plates: 1.1 kW Motor power, batch oil circulation pump: 3 kW Batch dimensions with base grate Height: 950 mm Width: 700 mm Length: 1,600 mm Weight: 1,000 kg Note: The dismantling and loading of the furnace must be organized by the buyer.

Condition: used, functionality: fully functional, The Selco NEOMIG 242 is a classic, extremely robust MIG/MAG welding machine from the Italian premium manufacturer Selco (which was acquired by voestalpine Böhler Welding several years ago). Unlike modern, fully digital inverter machines, this is a stepped, electromechanical transformer system. This means that it is considerably heavier and larger than a modern compact inverter, but it is considered practically indestructible in metalworking shops and workshops, with an enormous service life and a very stable arc. Technical data at a glance Feature Value / Specification Welding process MIG/MAG (gas-shielded welding) Rodpszd S Rysfx Abhow Connection voltage 400 V (3-phase / three-phase) Welding current range 30 – 240 A Duty cycle 30% at 240 A60% at 170 A100% at 131 A Voltage levels Multi-stage, manually adjustable Wire feed Integrated, mechanical roller feed Max. power consumption approx. 8.3 kW Cooling Typically gas-cooled (standard hose package) Important features & practical advantages Classic transformer technology: Since no sensitive electronics are installed in the power unit, the NEOMIG 242 tolerates dust, metal grinding dirt and moisture much better than modern inverters. It also operates absolutely reliably under harsh conditions in the workshop or on-site. Excellent welding properties: Selco was known in the industry for its perfectly matched copper transformers and chokes. The system provides a very spatter-free, smooth and even arc in steel, stainless steel and also in thinner aluminum applications. Intuitive operation without unnecessary features: No complicated digital menus. You select the appropriate welding level, adjust the wire speed on the potentiometer and can start immediately. Using toggle switches, modes such as 2-cycle / 4-cycle (for long seams) as well as spot and interval welding can also be activated. Used market assessment: Since this series is no longer produced new, it is a real insider tip on the used market for workshops and ambitious DIY enthusiasts. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Year of construction: 2023, operating hours: 5,027 h, condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, We are offering this very well-maintained Halter CNC Automation Millstacker Premium 25 handling robot for CNC milling machines, year of manufacture 2023, with very low operating hours. Custom modifications deviating from the standard model that were carried out for us: 1. An individual deposit position (in our case, onto a chute into a water bath) was added as an option. This setup also allows all 12 stacking positions to be loaded with raw parts—whereas when depositing onto the table, only 11 stacking positions can be loaded with raw parts. 2. Customized adjustment of the angular alignment in the magazine. As a result, longer/larger parts can also be placed lengthwise between the bars when diagonal placement is no longer possible. 3. An additional set of longer support bars was manufactured to securely position larger parts. Rjdpfx Absy Nmmiohow If you have any questions or require more information, please feel free to send us a message or call us.

Condition: new, empty load weight: 450 kg, maximum load weight: 1,050 kg, overall weight: 1,500 kg, loading space length: 2,500 mm, loading space width: 1,550 mm, loading space height: 300 mm, Single-axle rear tipper from the *manufacturer* Cheval Liberte or also known as Debon*. The PW0LUX *high loader* rear tipper* can be easily loaded from the side and rear with a *forklift* or by hand thanks to the folding and removable *side walls*. The load can be tipped from this *tipping trailer* with *electrohydraulics*. The *car trailer* is equipped with foldable and removable *aluminium sides*, *steel on floor*, *e-hydraulics* with battery, *automatic support wheel*, *lashing eyes*, welded immersion bath* hot-dip galvanized frame *and a *V-drawbar*. Trailer accessories such as a *grid attachment*, *side wall* attachment*, *tarpaulin* with *frame*, *flat tarpaulin*, trailer net, charger* and *supports* are also available at an extra charge. Redpfx Aeqv D Npsbhew

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm - Drive: Siemens motor 95 kW - Volumetric K-Tron dosing - Degassing zone - K-SWE 180 double piston screen changer / filter - strand nozzle - Control system Rsdpfxeqy E Evo Abhsw Optionally with strand pelletizer, water bath etc. Inspection possible by arrangement

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Extruder: RZE 120mm Redpovbcbuofx Abhew Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: AC, total height: 1,620 mm, total length: 830 mm, total width: 900 mm, overall weight: 110 kg, saw blade diameter: 275 mm, cutting range round steel at 90°: 80 mm, saw drive: 1,500 W, Exhibition machine, like new Year of manufacture: 2022 - Suitable for steel - Two cutting speeds - Reduction gear, low-noise operation in oil bath - Automatic membrane coolant pump with standard coolant filter Rsdpfxsxrz Iko Abhow - Movable safety guard ensures optimum safety during cutting - Control handle with safety switch - Electrical system in low voltage (24 volts), equipped with emergency stop button, main switch, speed selection switch, and overload protection - Machine head rotatable 45° to both sides - Quick-release vice tiltable 45° to both sides - Quick-release vice with double clamping device ensures precise, burr-free cuts - Quality Made in Europe

Condition: new, Maximum turning height: 230 mm Maximum turning length: 1000 mm Turning diameter over bed: 460 mm Turning diameter without bridge: 690 mm Turning diameter over support: 285 mm Bore diameter: 58 mm Spindle mounting according to DIN 55029: 1 - 6" 12 speeds: 25 - 2000 rpm Rodjk Dn Nwspfx Abhsw Travel – Top slide: 128 mm Travel – Cross slide: 285 mm Feed rates (longitudinal): 0.031 - 1.7 mm/rev Feed rates (transverse): 0.014 - 0.784 mm/rev Thread (metric): 0.25 – 3.5 mm Thread (inch): 2 - 112 TPI Thread (diametral): 8 - 144 D.P. Thread (module): 0.25 - 3.5 mm Motor power: 400 V / 50 Hz / 5.5 kW Tailstock: MK 4 Dimensions L x W x H: 2020 x 1080 x 1600 mm Weight: 1680 kg Accessories / Special features: • Heavy-duty lead screw and feed screw lathe with extensive standard equipment. Low vibration and smooth running. Includes a solid base and machine bed. • 3-axis digital display • 3-jaw chuck Ø 250 mm • 4-jaw chuck Ø 300 mm • Stationary and traveling steady rest • Multifix size B quick-change tool holder system, mounted, 5-piece • Strong and torsion-resistant construction of the machine base and bed, cast in one piece from vibration-absorbing gray cast iron. • Hardened and ground bed guide rails • Generously sized machine bed • All guides are equipped with adjustable wedge strips • Central lubrication in the bed slide • Right/left rotation switchable on the bed slide • Removable bed bridge for machining large workpieces • Adjustable tailstock for turning tapers • Guaranteed concentricity < 0.015 mm measured in the spindle nose • Enclosed feed gear, gears and shafts are hardened and ground • Clear control panel with solid selector levers for selecting speeds • Oil bath gear system with hardened and ground gear teeth • Handwheels with adjustable fine scale • Main spindle hardened and ground and running in an oil bath, as well as guided by tapered roller bearings • Longitudinal feed, switchable by means of 4 adjustable cam followers • Mechanical foot-operated spindle brake • Lead screw cover • Acceptance test report • Manufactured according to DIN 8606 toolmaker's accuracy • CE compliant Delivery time: immediate, subject to prior sale Year of manufacture: 2023 (unused showroom machine) Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1992, Table surface area: 1850 x 710 mm Permissible table load: 3000 kg Travel ranges: Longitudinal, automatic (X): 1600 mm Lateral, automatic (Y): 710 mm Vertical, automatic (Z): 850 mm Spindle mounting: SK 50 Speed range: 20 - 2500 RPM Main motor power, AC: 15 kW Transport dimensions L x W x H: 3650 x 2300 x 2700 mm Weight: 9400 kg Accessories / Special features: • CNC path control system, manufacturer HEIDENHAIN, model TNC 360 with 3 scales • Programming language "Plain text dialog" and DIN-ISO • Electronic handwheel HEIDENHAIN HR 330 with magnetic holder • 3D probing system HEIDENHAIN TS 120 • Main spindle compact unit RAC 3 • Control system prepared for 4th axis • Universal milling head system "HURON" with 2 levels, gears run in an oil bath • Hydraulic tool clamping • Coolant system • Central lubrication with interval • German electrical system, drives INDRAMAT • Operator control panel • Operating manual - Newly refurbished milling head, partially overhauled with new gears, seals and bearings - Oil dispenser for central lubrication renewed Operating hours: 10,032 Program runs: 3,288 Spindle ON: 2,569 Siegfried Volz Werkzeugmaschinen Redpjttamksfx Abhow Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2009, functionality: fully functional, total height: 3,500 mm, total width: 2,000 mm, total length: 4,000 mm, type of input current: three-phase, input voltage: 400 V, pressure: 1 bar, operating pressure: 1 bar, overpressure (max.): 1 bar, water tank capacity: 350 l, tank capacity: 200 l, Equipment: documentation/manual, We are offering this used KOTHE K800N water bath distillery for spirits, manufactured in 2009. Reference number: 0036 Serial number: 1862 Year of manufacture: 2009 Still volume: 200 L Pressure chamber volume: 230 L Maximum pressure (PS): 1.0 bar Test pressure (PT): 1.5 bar For sale is a high-quality water bath distillery from Kothe, featuring customs lock, distillery control, and alcohol meter. Equipment: Rodpfsy Itlcex Abhow - Designed as a show distillery - 200 L water bath still - Electrically heated, 4 x 12 kW heating elements - Fitted with a whisky helmet - Side-mounted rectification column with 3 plates and dephlegmator - 100 L cooling water tank - Agitator - High-pressure cleaning - eLogik Red distillery control - Desticounter alcohol meter Year of manufacture (still): 2009 Year of manufacture (alcohol meter and distillery control): 2024 All equipment in excellent condition. Original price: €74,400 (net) If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, mileage: 6,092 km, power: 28 kW (38.07 HP), gearing type: mechanical, fuel type: diesel, color: blue, empty load weight: 2,340 kg, number of seats: 1, first registration: 01/1963, total length: 1,720 mm, total width: 1,730 mm, driver cabin: other, Vehicle location: Bovenden, Rjdpfx Abovhh Aqohjw The Granit 500 is a tractor produced by Hanomag in the 1960s, which replaced the R 332 Granit. In the course of its production time, the engine power was increased to 40 hp by increasing the engine speed. Another year later, the design of the hood changed. Water-cooled four-stroke three-cylinder diesel engine, type D21 CR with swirl chamber process, wet cylinder liners, oil bath air filter, crankshaft with four bearings, suspended conical valves, pressure circulation lubrication, strainer jacket filter, centrifugal governor and thermostatic dual-circuit cooling. Engine was overhauled approx. 150 operating hours ago! Approx. 2,000.00 EUR for engine and technology r original condition ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, maximum load weight: 2,790 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 08/2015, Year of construction: 2015, Equipment: ABS, INTERNAL VEHICLE NUMBER: M548 ---TRAILER DATA: Bootsanhänger PILOB MBT 35 * First Registration: 17.08.2015 * 2 axles * Unladen weight: 710 kg * Payload: 2,790 kg * Gross permitted weight: 3,500 kg Sea Ray 245DA HORIZON DRAM: * SEA RAY 245DA CABIN CRUISER * MANUFACTURER: SEA RAY * MODEL: 245DA * ENGINE: OMC STERNDRIVE * YEAR OF MANUFACTURE: 1981 * POWER: 193 kW / 262 HP * FUEL: PETROL * MATERIAL: GRP * LENGTH: 7.49 m * BEAM: 2.44 m * DRAFT: approx. 0.90 m * FUEL TANK: approx. 280 litres * WATER TANK: approx. 200 litres * WITH ALL EXTRAS INCLUDING WEATHER CANOPY AND FULL COVER INTERIOR: * Spacious cabin with standing height * Galley with sink, refrigerator * Separate WC with electric toilet and washbasin * Sleeping accommodation for up to 4 people (V-berth & mid-cabin) * Dinette with convertible seating area EXTERIOR: * Large cockpit with seating and cockpit table * Helm station with clear instrument panel * Bimini top and camper enclosure * Swim platform with bathing ladder TECHNICAL EQUIPMENT: * Bow thruster for easy manoeuvring * Electric anchor winch * Shore power connection & battery charger +++ Exclusive Offer at Autohaus Mat GmbH: Up to €1,000 trade-in bonus – your advantage for switching vehicles! +++ Contact us directly via WhatsApp at: Why choose Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximise the value of your vehicle and benefit when purchasing a new model. 2. Individual financing solutions: Want to finance your new vehicle? We offer tailor-made financing options to suit your needs: * With or without down payment * Flexible terms Rsdpsymvyrofx Abhjw * Top conditions 3. Personal customer service: Our experienced team supports you from the initial consultation through to vehicle delivery. 4. Additional services: Besides vehicle purchase, we offer exclusive services to ensure a smooth process: * Worldwide vehicle sales: Support in purchasing and exporting, wherever you are. * Transit license plates: Provision of export or short-term license plates for transport. * Customs clearance: We handle all formalities for export abroad. * Delivery of your vehicle: Safe and punctual delivery directly to you. Important: All offers are subject to availability. The vehicle description serves as a guide; only the details in the purchase contract or order confirmation are legally binding. For vehicles with VAT, net sales for export are generally possible if all required documents are available. Net sales within the EU are now only conducted with a VAT deposit and proof of registration in the destination country (Confirmation of Arrival), provided all necessary documents are present. For our export customers, we offer the following services: * Export license plates for up to 30 days * Short-term license plates (5 days) * Preparation of the export declaration Contact us directly via WhatsApp at:

Condition: ready for operation (used), Year of construction: 2006, controller manufacturer: FANUC, controller model: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine. 2 similar machines available! Additional information • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Max diameter without preparation: 8 mm (without clamp) • Motor voltage: 400 V • Control voltage: 24 V • Independent counter spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders Rsdpfoy S Aqijx Abhow • Sensor for tool breakage detection • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine • Front/rear support foot • "HYBRIDE 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control box • Integrated 25-liter hydraulic unit with filter • Moving headstock • Directed spindle stopOptional: Comprehensive package of measuring instruments

Condition: good (used), Features: - Conventional lathe - Digital display (230 V single-phase power supply) - Longitudinal travel 850 mm, transverse travel 205 mm, vertical travel 95 mm - Programming of 200 auxiliary zero points - 200-tool magazine - Taper measurement - Reinforced prismatic bed, gray cast iron, induction hardened and ground Redpfxoy U Ruzo Abhsw - CAMLOCK D1-4'' spindle - Hardened and ground spindle, oil-bath lubricated, mounted on 2 high-precision tapered roller bearings - Turning accuracy < 0.015 mm on the chuck - Hardened and ground gearbox gears, oil-bath lubricated - Adjustable gib-free slides - Quick feed change via mechanical gearbox - Automatic longitudinal and transverse feeds - Simultaneous control of the spindle and leadscrew - Lateral movement of the tailstock +/- 10 mm - Maximum diameter above the carriage: 212 mm - Maximum diameter under the gap: 491 mm - Left/right rotation reversal via apron control - Pulse operation - Graduated verniers with zeroing on all axes