Used Stc Workstation for sale (502)

Condition: good (used), Year of construction: 2011, AKL, TGW with 3 Mustang stacker cranes, 22,756 storage locations, container size 60 x 40 x 35 cm – used - : Price ex location: only €99,500 (net), plus dismantling and additional costs! Manufacturer: TGW Type: AKL Year of construction: 2011 Device type: Mustang stacker crane Number of stacker cranes: 3 units Aisles: 3 System dimensions (L x W x H): 64 x 13 x 7.90 m Storage locations: 22,756 Payload: 50 kg per container Load units (max. dimensions): 600 mm x 400 mm x 350 mm Double-deep storage Condition: good Available: immediately Location: Würzburg area Plan available as DWG file – further technical documentation also available Mustang Stacker Crane Base unit: Itjdpfxoyhxm Ij Acroh The single-mast Mustang stacker crane is designed for automated storage and retrieval of containers in a high-bay or flow-through warehouse. This storage system can also be utilized for supplying workstations on assembly lines. Device type combination Mustang_L HS 7.8m & 1 KTC (6x4 2L 2x50kg) // Mustang_L HS & KTC (6x TGW Total weight (incl. payload): 1,665 kg Lifting load total (incl. payload): 396 kg Payload (incl. load handling device): 100 kg Travel speed in x: 4.80 m/s Travel acceleration in x: 2.80 m/s² Travel deceleration in x: 2.80 m/s² End positioning time in x: 1.5 s Lifting speed in y: 3.00 m/s Lifting acceleration in y: 3.00 m/s² Lifting deceleration in y: 3.00 m/s² End positioning time in y: 0.5 s Dwell time: 1.0 s Theoretical operating cycle time: 56.2 s Crane cycles: 58 per hour Conveyed and stored goods FLG 2: Load handling devices (LHM): Plastic trays, occasionally loaded with cartons or containers Dimensions L x W x H: 600 mm x 400 mm x 350 mm Possible overhangs included: max. 5 mm Total weight: min. 2 kg / max. 50 kg per LHM Load: plastic parts Special features: Load handling devices have a flat, smooth, dry, oil- and grease-free bottom. The maximum deflection at total weight as stated is 5 mm. These carriers are placed on only 3 levels. Equipment performance Stacker crane: 122 putaway and retrieval cycles per hour in double cycle mode, including 61 relocations in accordance with FEM 9.851 Lifter: 210 containers/hour from top to bottom and 210 from bottom to top Availability: The guaranteed system availability after successful commissioning is 98%, in accordance with FEM 9221 and 9222.

Condition: used, Year of construction: 2006, functionality: fully functional, TECHNICAL DETAILS Components ADVANTAGE C transverse loader: automatic ROTATING DEVICE (flipper): available BIESSE FTT: with 4 heads, drilling and milling, automatic tool change BIESSE FHT: 2 WORKING UNITS horizontal drilling and dowel insertion WANDRES: brush cleaning from top ADVANTAGE SC transverse unloader: automatic Plate dimensions Plate length: 240 - 3,200 mm Single panel width: 140 - 1,550 mm Plate width: 140 - 800 mm Plate thickness: 12 - 60 mm Drilling units Drill heads FTT 800: 2 machining centres with 4 boring units - 5 working tables Vertical spindles (X-direction): 14 independent per head Vertical spindles (Y-direction): 18 independent per head Horizontal spindles (X-direction): 3 independent, with double output Horizontal spindles (Y-direction): 3 independent, with double output Tool change system Revolver cartridges: 2 Positions per cassette: 56 Application: Automatic tool change of the vertical spindle centers on 4 drilling units of the two machining centers A and B. Milling spindles Electro spindle 1: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Electro spindle 2: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Lateral positioning units Workstations: 2 for parallel processing of identical or mirror-inverted panels left positioning element: fixed for lateral reference Right positioning element: movable in X-direction, on lower supports, linearly guided Adjustment: automatic according to the X-dimension of the panel Drive: Brushless with digital control Function: Detection of the actual X Length in the machining center, automatic correction of the drilling positions Max. travel speed: 120 m/min Loading and unloading Infeed system: 1 belt conveyor with cross feed, single drive Unloading system: 1 belt conveyor with cross feed, single drive Additional: Cleaning fan in the unloading area Drill heads FHT (horizontal): machining centres with 2 working units (1 LH unit / 1 RH unit) - 3 working tables. HORIZONTAL BORING UNITS with 24 independent spindles to be installed onto 2 operating units HORIZONTAL INSERTING UNITS WITH 5+5 GLUE INJECTORS AND 8 mm. DIAMETER DOWEL INSERTERS Iodpey Ui Rnjfx Acrjth TOOL-HOLDER ADAPTOR for the quick change spindles of the boring units. GLUE INJECTION AND DOWEL INSERTING UNIT for 8 mm. dia. dowels to be added to the standard ones. The unit is prearranged for the insertion of 8 mm. diameter and 25-35 mm. long dowels.* The 8 mm. diam. dowel inserting units are required. NOTE: Dowel inserting unit was never used and not tested. Not possible to be tested ADVANTAGE C 3200 TRASV. 1 POS - loading ADVANTAGE SC 3200 TRASV. 1 POS - unloading Security features Standards: CE compliant Safety equipment: Extensive protective enclosures

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, STC-Ref:G-022-7715 Heidelberg Plattenabkante // Platebender, Year: 2008 Ijdpfxozcuzye Acreth equipped: - suitable for Heidelberg SM / CD - Plate bender --> available: 06/2026

Condition: used, Year of construction: 2004, functionality: fully functional, Meyn Evisceration Line – Complete Set – Well Maintained For sale: Complete poultry evisceration line manufactured by MEYN, CCW version. Machine list: • Meyn Maestro Eviscerator (ECP version with height adjustment during operation via mechanical control), 28 units (year 2004) • Meyn Opener Scissor ECP, 16 units (year 2004) • Meyn Cropping Machine ECP (version with height adjustment during operation via hydraulic control), 20 units (with green HQ blocks, year 2004) • Meyn Vent Cutter ECP (version with height adjustment during operation via hydraulic control), 20 units (year 2004) • Meyn Inside/Outside Washer, 20 units (year 2007) Itedpeyvvt Eofx Acrjh • 2 x Meyn Gizzard Harvester CD6000 (years 2017 and 2020) • Meyn Gizzard cleaning table with two workstations • Tray conveyor with comb separators and semi-automatic liver and heart recovery • Rehanger from killing line to EV line (manufactured by Szlachet-Stal), year 2013 • Static chicken unloader (manufactured by Szlachet-Stal), year 2013 Details: • All machines equipped with original nameplates • Evisceration machines – year 2004, 12,000 bph capacity • Gizzard processing machines – years 2017 & 2020, 2 x 6,000 bph • Rehanger and unloader – 7,500 bph • Equipment regularly serviced and maintained (all replacements performed on time) • Large stock of spare parts included • Includes drives and tensioner Condition: Good working condition, ready for operation Inspection: The line can be seen in operation at 7,500 bph (subject to sanitary requirements) For further information, technical details, or pricing, please contact us.

Condition: used, This listing is for Thermo Scientific Evolution 300 UV-Visible Spectrometer. The unit is in full working condition and ready for immediate use. The Evolution 300 from Thermo Scientific provides reliable dual-beam optics and a wide spectral range (190 to 1100 nm) to meet demanding life science and pharmaceutical applications. Includes variable spectral bandwidth settings and sensitive detection capabilities for precise quantitative analysis and kinetics measurements. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Itedpezduw Nofx Acrsh Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, This listing is for Thermo Scientific Evolution 300 UV-Visible Spectrometer The unit is in full working condition and ready for immediate use This high-performance double-beam spectrophotometer delivers exceptional accuracy and versatility for demanding research and routine quality control applications. Transparency Report and Technical Audit: Iedpfxezdurme Acroth Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, mileage: 5,324 km, gearing type: other, fuel type: electric, color: red, number of seats: 1, first registration: 03/2015, emission class: none, suspension: other, Year of construction: 2015, operating hours: 5,324 h, driver cabin: other, fuel: electricity, For sale is a Linde P 60 Z electric tow tractor, first registered in March 2015, with only 5,324 operating hours. The tow tractor is in well-maintained condition, immediately ready for use, and offers a reliable, high-performance solution for towing trailers, loads, or materials in warehouses, production facilities, airports, or industrial sites. Itsdpfx Asxyl A Iocrjh The Linde P 60 Z impresses with its powerful electric drive system, enabling emission-free, quiet, and efficient operation. Thanks to Linde’s robust construction, the tractor is especially durable and low-maintenance, even during intensive daily use. Its compact design ensures high maneuverability, allowing it to easily navigate narrow warehouse aisles, company premises, or industrial areas. The red exterior color provides high visibility and safety during operation. At the same time, the tractor’s ergonomic design offers a comfortable workstation, enabling efficient, fatigue-free operation even during longer shifts. The Linde P 60 Z is the ideal solution for companies seeking a powerful, reliable, and low-maintenance electric tow tractor. With only 5,324 operating hours, the machine is practically like new and can be put to productive use immediately. Inspection or demonstration is possible by appointment at any time, so you can see the reliability, performance, and maneuverability of this tractor for yourself. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors excepted.

Condition: used, Year of construction: 2016, MURAT NR 242 - Profile Machining Center ¬ All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. The two machining stations for profiles with reinforcement steel increases production capacity. Itjdpfx Aoy Su Exjcrsh ¬ Stacking of 10 profiles (max. 6,5 m length). ¬ Manual barcode labeling system integrated with single-lines. ¬ Servo controlled automatic swing of the saw to all angles between 30° and 150° with 0.1° accuracy. ¬ Drain slot routing, drilling and routing at variable angles. ¬ Automatic screwing of reinforcement steels. ¬ Drilling of fixation, triple handle and hinge holes together with the reinforcement steel. ¬ Automatic conveyor belt system to transport scrap profiles to waste container. ¬ Waste profiles longer than 1,000 mm. can be re-processed. ¬ 17” touchscreen enables easy access and control. ¬ High performance Workstation PC with Intel® Core™ i5 3,1 Ghz microprocessor. ¬ All error messages can be monitored from the screen by the software developed by Murat Machinery Software Department. ¬ By online connection to the entire system, remote detection of malfunctions and maintenance is available. ¬ Data transfer is available via network connection or USB interface. ¬ Full integration with various window and door production software. ¬ Central lubrication system eases maintenance. Technical Features: Power supply: 400 V, 3ph, 50-60 Hz Power output: 30 kW, 80A Sawblade diameter: Æ 500 mm. Max. profile height: 140 mm. Min. profile height: 45 mm. Max. profile width: 130 mm. Min. profile width: 40 mm. Max. raw profile length: 6,500 mm. Max. profile processing length: 3,500 mm. Min. profile processing length: 400 mm. Air pressure: 6-8 bar Air consumption: 1200 l/min. Machine height: 2,350 mm. Machine length: 18,000 mm. Machine width: 10,500 mm. Machine weight: 10,800 kg.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, STC-Ref:G-022-7709 Heidelberg PM-GTO-52-1, Year: 1997, Impressions: approx. 62 mio. format: 360x520 mm, 1 colors equipped: - Plus-version: prepared for numbering and perforating - numbering unit - perforating unit Itjdpfx Acszcfrverjh - direct dampening (Heidelberg for GTO 52) - powder sprayer - basedevice for perforating and slitting --> available: 07/2026

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, STC-Ref:G-022-7707 Heidelberg SM-52-2-P ,Year: 1999, Impressions: approx. 70 mio. format: 370x520 mm, 2 colors equipped: - Plus-version: prepared for numbering and perforating - wash device for impression cylinders - electronical double sheet control - electronical pull lay control - powder sprayer Grafix - Technotrans cooling, metering unit - basedevice for perforating and slitting - Perfecting 1-1/2-0 Itjdpfxezcfqle Acroh - Lowpile Delivery - Autoplate - numbering unit - Alcolor automatic filmdamping - Cptronic - ink-roller wash device managed from console - blanket wash-up device --> available: 07/2026

Condition: used, Steel Bench Grinder, Steel Grinding Machine ULRICH KLINGEL Type HSM 4 Year of manufacture: approx. 1976 with 4 workstations Grinding wheel diameter: 1x 100; 1x 150; 2x 200 mm Grinding wheel speed: approx. 1400/2800 rpm Motor power: approx. 1 kW Power supply: 380 Volt, 50 Hz - 3x oscillating grinding tables - all 3 workstations with swiveling tables, feed adjustment via handwheel - one workstation (the 4th) with a swiveling and tilting table, feed adjustment via handwheel - 1 diamond grinding wheel Ø 100 mm mounted (heavily worn) - 2 corundum grinding wheels Ø 200 mm mounted - Forward and reverse running at each station - Coolant system integrated in the machine base Required space (L x W x H): 1100 x 1000 x 1300 mm Weight: approx. 450 kg good condition Itodpfodz Srkox Acrjh

Condition: excellent (used), For sale: a robust, double-station bookbinding/printing press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. This machine was previously operated by the public sector unit Stadt Fürth (Germany), which ensures it is complete and well-maintained. The device is equipped with two independent workstations, a heavy-duty upper beam, and pressure adjustment via lever arms. The lower housing contains the mechanical and electrical systems; power is supplied through a 16A CEE connector (400V). The machine is mounted on wheels for easy mobility. Application This press is suitable for bookbinding, printing, modeling, technical works, and any applications requiring even pressure over a larger area. Ideal for book blocks, covers, laminates, paper and cardboard elements, and other materials that require pressing or stabilization under pressure. Technical condition – Complete unit – All levers and mechanisms function correctly – 400V power supply, CEE 16A plug – Mobile design on wheels – Normal signs of use visible in photos Itsdpfx Acsxzu Rqoroh – Machine is ready for operation Manufacturer: Karl Tränklein K.G. Country of manufacture: Germany (Made in Germany)

Condition: new, Year of construction: 2026, functionality: fully functional, Nanxing ND712D is a state-of-the-art 6-sided CNC drilling machine, equipped with two independent workstations, allowing for simultaneous processing of two panels and doubling productivity. This machine is designed for furniture manufacturers seeking speed, precision, and reliability within a compact footprint. Key Features - 2 independent workstations (1200 + 650 mm), each with a dedicated computer and processing units. - Optimized drilling blocks: up to 19 vertical drills + horizontal drills on the X and Y axes. - 4 main spindles (2 upper, 2 lower) with power up to 5.5 kW and 18,000 rpm. - Air-cushion tables for scratch-free panel handling. - Automatic dimension detector with alarm and panel compensation feature. - Servo-driven clamps and automatic side alignment system for maximum accuracy. - Advanced software + SYNTEC CNC control with user-friendly interface, supporting MPR, DXF, BPP, PDX, and XML file formats. - Barcode scanner for integration into automated production workflows. - Enhanced safety: side sensors, emergency stop, cable protection. Technical Specifications - Panel dimensions: Length 200–3000 mm / Width 30–650 mm / Thickness 10–60 mm - Max. traverse speed: X/U – 135 m/min, Y – 75 m/min, Z – 30 m/min - Total installed power: 43.8 kW - Weight: 6,300 kg - Machine dimensions: 6,620 × 4,620 × 2,378 mm - Power supply: 380V / 50Hz / 3 phase Application Areas Itjdjxcwmqjpfx Acrjh - Medium and large-scale furniture manufacturing - Panel processing for kitchen cabinets, wardrobes, bathroom and office furniture - Complete 6-sided drilling + light milling in a single setup User Benefits - High productivity: processes two panels simultaneously - Error reduction: automatic dimension detection and precise positioning - Smart line integration: barcode scanner, compatible with ERP/CAD-CAM software - Optimal cost / maximum efficiency: one machine equals two drilling solutions

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. Iodpfx Acezcaufersth - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Condition: used, Year of construction: 2023, Integrated CompAir L45RS Workstation Manufacturer Gardner Denver Deutschland GmbH (Main Compressor Package), with integrated components from Parker Hannifin Manufacturing S.r.l. (Refrigeration Dryer) and Cordivari S.r.l. (Galvanized Pressure Vessel). Type Variable-speed rotary screw air compressor workstation driven by an integrated frequency inverter system, fully integrated with a downstream refrigeration dryer and a vertical galvanized air receiver tank. Industrial Applications Engineered for continuous, energy-efficient plant compressed air generation in manufacturing, industrial engineering workshops, packaging facilities, and automotive assembly plants. This system relies on variable-speed control to match precise downstream air demands, significantly reducing energy overheads under fluctuating load profiles. Key Technical Specifications * Core Compressor Unit: CompAir L45RS-13A (Version V2) - Technology: Oil-injected rotary screw with frequency inverter (Regulated Speed) - Installed Motor Power: $45 \text{ kW}$ (Max speed: 4,250 R.P.M.) - Volume Flow Rate (Capacity): Up to $8.02 \text{ m}^3\text{/min}$ max - Operating Pressure: $13 \text{ bar g}$ maximum stage pressure - Electrical Supply: $400 \text{ V}$ | 3-Phase | $50 \text{ Hz}$ | Full load current: $97 \text{ A}$ - Control Unit: DELCOS XL touchscreen graphic controller showing 55,404 total running hours and 55,366 hours loaded - Refrigeration Air Dryer: CompAir F95HS (Parker Hannifin), using eco-friendly R407C gas, max pressure $14 \text{ bar}$ - Air Receiver Tank: Cordivari $986 \text{-Liter}$ vertical vessel, maximum allowable pressure $10.67 \text{ bar}$, hot-dip galvanized finish for long-term corrosion resistance Machine Utilization The main CompAir L45RS rotary screw compressor serves as the mechanical core of this processing package, drawing raw air and compressing it via its high-efficiency $45 \text{ kW}$ screw element. The integrated inverter matches motor speeds directly to factory demand to avoid wasteful start-stop cycles. During continuous operations, the CompAir F95HS refrigeration dryer strips moisture out of the compressed air stream to safeguard downstream pneumatic components and tools from rust and water carryover. Finally, the standalone $986\text{-Liter}$ galvanized storage tank acts as an expansion buffer volume to smooth out pressure spikes and handle natural consumption peaks without stressing the main drive. System Highlights * Compressor-Centric Production Station: A complete utility layout engineered to maximize the operational lifespan and performance of the core $45 \text{ kW}$ screw compressor. Isdpfx Aozcatbjcreth - Smart Variable Demand Matching: The inverter regulation ensures optimal energy savings, matching actual air consumption rather than running a constant fixed-speed overhead drain. - Robust Diagnostic Integrity: The premium DELCOS XL interface monitors air station diagnostics, recording exact usage metrics, load profiles, and service intervals directly from one integrated control panel.

Year of construction: 2015, condition: used, control Siemens number of workstations 4 Stück CAB unit 2 Stück Workpiece spindle: 4 Stück Height in the middle of the circular indexing tabl 1396 mm tail stock 4 Stück Workpiece spindle speed (3x) 3000 1/min Speed ??CAB unit (2x) 6000 1/min Ijdpfexq Hknsx Acreth Rotary table speed (1x) 1435 1/min Workpiece spindle drive 9 Nm CAB unit 6 Nm round table 0,75 kW In our assessment, the machine is in good condition and can be inspected under power by appointment. The machine was used for cam machining. Comprehensive operating instructions are available. See the installation plan in the PDF document. Accessories, tools, and clamping devices shown are only included in the scope of delivery if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, This listing is for Genlab OV/100/SS/F/DIG Oven The unit is in full working condition and ready for immediate use This high-quality laboratory oven features a stainless steel interior, fan circulation for temperature uniformity, and an intuitive digital controller for precise thermal processing. [[1](), [2](?srsltid=AfmBOoqrBx2xG5acm9HXLERUkvFsY4t5ruoXCtKGooEYCW5co-g 0--YA), [3]()] Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Itodpfxozc H Tbe Acrjh Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: excellent (used), Year of construction: 2012, Coordinate measuring machine for inline and prduction use from Mitutoyo in good condition, built 2012, installed 2014 Controller Mitutoyo UC240, Probe Renishaw PH10MQ/TP7, Software Mitutoyo MCOSMOS-1 V3.5 Measuring ranges: X – axis 905 mm Y – axis 1005 mm Z – axis 605 mm Accuracy acc. ISO 10360 MPEE = [2,5 + 3,5L/1000] µm at temperature range 18… 22 °C Base material Steel fixing holes M8 x 1,25 Scales Mitutoyo Linear Scales Scale Resolution 0,0001 mm DC motores with encoders Guideways linear guides Ijdpfxeh Nu Uhs Acreth Probe Renishaw PH10MQ with PHC10-2 plus (used) Probe Renishaw TP7 optional with ACR-3 (used) Computer Workstation WIN 10 (used) or equipment on demand e.g. upgrade to Renishaw scanning probe Installation and Calibration € 5.000,-- plus travel expenses On demand: - SP25M + FCR rack instead of TP7 ( + € 12.000,--) - Upgrade PH10MQplus (€ 8.000,--)

Condition: used, functionality: fully functional, Year of construction: 2026, The FM300N transport fan is a heavy-duty industrial-grade unit designed for efficient extraction of sawdust, dust, and fine wood waste in production plants and carpentry workshops. With a high capacity of 2530 m³/h and a powerful 1.5 kW three-phase motor, the unit effectively supports woodworking processes, ensuring cleanliness, safety, and smooth operation. The FM300N is a reliable sawdust blower engineered for intensive use and long service life. Key Advantages Extraction capacity of 2530 m³/h – effective contaminant removal even during high-intensity operation 1.5 kW three-phase motor – stable performance under continuous load Universal connection system – one 130 mm inlet or two independent 100 mm inlets Damage-resistant construction – durable metal housing Energy-efficient and low-noise operation – optimized power consumption and improved acoustic comfort Design and Technology The FM300N is built on a stable, welded steel frame resistant to dynamic loads and external factors typical of industrial environments. The high-efficiency aerodynamic impeller is mounted directly on the motor shaft, eliminating transmission-related power losses and ensuring long service life. The unit features two 100 mm suction ports (or one 130 mm port), allowing simultaneous operation of two workstations or connection to large-format machines. The 400 V three-phase motor provides sufficient power and operational stability in industrial facilities. A rotational speed of 2950 rpm guarantees intensive airflow, even during prolonged operation. The entire design has been optimized for easy installation and maximum use of workspace. Precision and Performance The FM300N is a dependable sawdust extraction unit capable of transporting wood by-products generated during machining—from fine sanding dust to heavier sawdust and chips. Its high airflow capacity ensures smooth operation of production workstations, reducing the risk of blockages and limiting the emission of contaminants in the working area. Applications The FM300N is intended for professional environments where durability and efficiency are essential. It can operate as a standalone sawdust fan or as part of an advanced dust extraction system. Typical applications include: carpentry workshops furniture manufacturing plants wooden component production departments workstations with circular saws, planers, spindle moulders, and sanders Standard Equipment powder-coated steel housing three-phase motor 400 V / 50 Hz suction port: 1 × 130 mm or 2 × 100 mm integrated base for stationary installation Optional Equipment bag filters Iodpoy Tiaysfx Acrsth flexible hoses Ø100 mm, Ø120 mm, Ø150 mm Technical Specifications Parameter Value Motor power 1.5 kW Speed 2950 rpm Extraction capacity 2530 m³/h Inlet diameter 130 mm / 2 × 100 mm Outlet diameter 120 mm Voltage / Frequency 400 V / 50 Hz Dimensions (L × W × H) 430 × 410 × 450 mm Weight 24 kg PLEASE NOTE!!! This machine is a return item and shows signs of use. No warranty.

Year of construction: 2008, condition: good (used), functionality: fully functional, W2-C | TILTING DEVICE FOR MEAT TRUCKS | Double tilting lift (2 x 200L trucks) Itsdpfx Acjy Uflnorjh Model / Type: W2-C Year of manufacture: 2008 Power supply: 400 V / 3 phases / 50 Hz Overall dimensions: 2300 x 1200 x 1200 mm The W2-C, an industrial, two-station tilting device for meat trucks, is an indispensable element in automating internal transport in medium and large food processing plants. The device is designed to facilitate the work of operators, eliminate heavy physical labor, and accelerate the technological process when supplying raw materials to upstream machines (such as vacuum mixers, blenders, meat grinders, dicers, metal detectors, feed hoppers for packaging machines, or sorting lines). The uniqueness of the W2-C model lies in its dual configuration (2 x 200L), which allows for the simultaneous handling of two meat trucks. This solution doubles the efficiency of the loading station, enabling smooth and continuous dispensing of raw materials – while one truck is being emptied, the other can be prepared for lifting, or the machine can mix two different batches of raw materials directly at the discharge point. The tilting process is carried out in a controlled and safe manner. The angle of rotation of the gripping pocket is designed to ensure complete, 100% emptying of the truck, even with thick, sticky, or heavily chilled fillings and meat mixtures. The entire system is controlled via an ergonomic and intuitive panel, ensuring maximum operator safety at the workstation.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06-00376, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 150 mm, Manufacturer: Werth Messtechnik GmbH Type / Model: Scope-Check 400 × 400 × 150 3D CNC Machine Type: Multi-sensor Coordinate Measuring Machine (optical / tactile) • Year of Manufacture: 2006 • Serial Number: 06-00376 Condition • Used, well-maintained overall condition • Machine was fully operational in measurement use until recently • Regular calibrations documented • No visible damage to granite, guides, or measurement system Accessories / Delivery Scope • Granite-based machine with measurement glass and protective cover • CNC control with Scope controller • Renishaw probe (multiple stylus inserts included) • PC workstation comprising: • Computer • Monitor(s) • Keyboard, mouse • Control panel / joystick • Documentation: • User manuals (WinWerth) • Calibration and inspection reports • Folder with machine and measurement room documentation Iodpfx Acsx Sw R Dereth • Software and calibration data carriers (CD/DVD) • Integrated control cabinet with main switch Application Area • Form and position tolerance inspection • Dimensional inspection of: • Sheet metal forming parts • Turned and milled components • Tools • Prismatic and rotationally symmetric parts The unit is currently still installed and powered. An inspection while operational is possible by appointment. Dismantling, loading, and transport are to be carried out and borne by the buyer. • Measuring range (X/Y/Z): 400 × 400 × 150 mm • Control: CNC • Software: WinWerth, version 8.40 or higher (data carrier included) • Tool holder / probe: Renishaw, MK 2 • Probe system: Renishaw Probe Interface PI 200 • Measurement accuracy: • Length measurement deviation approximately 1.5 µm (according to Werth documentation / calibration records) • Voltage: 230 V AC • Frequency: 50 Hz • Power consumption: max. 10 A

Condition: used, functionality: fully functional, Combined profile shear (ironworker) for metalworking. Punches, cuts, notches, and severs structural steel (angles, flat bars, round bars, square bars) in a single machine. Robust East German/West German industrial design – extremely durable, easy to maintain, no high-tech frills. Features a large base plate and multiple workstations. Ideal for locksmiths, steel construction companies, metalworkers, blacksmiths, training workshops, or well-equipped hobbyists with sufficient space. A comparable new machine costs well over 15,000 EUR. Technical data: - Design: Combined profile shear with multiple stations (punching, shearing, notching, profiling) - Drive: Three-phase motor 400 V - Shear blades: included - Punching tools: included (see photo) - Steel base plate: cast, very stable - Machine weight: approx. 1,500 - 2,500 kg - Year of manufacture: approx. 1970s-1980s Collection / Transport: Itedpfx Acjzabv Serjh Self-collection with a heavy-duty forklift (>= 5 tons) or crane. Loading on site is possible. Shipping via a low-bed trailer is available by arrangement.

Condition: used, functionality: fully functional, Professional compressed air distribution set, consisting of 8 robust blocks on steel frames, consecutively numbered. Each block features multiple connections, making it suitable for workshop use, construction site applications, events, or mobile compressed air supply at various workstations. Equipped with couplings (standard size NW7.2 or as shown in the photo). Multiple blocks can be used simultaneously to distribute compressed air from one compressor to several stations. Ideal for: locksmiths, automotive workshops, event technology companies, construction companies, fire department equipment maintenance, and industrial maintenance. Technical data: - Quantity: 8 pieces, consecutively numbered 1-8 - Construction: steel block on stand frame with carrying handle Itodpfszablmex Acrjh - Connections: multiple couplings per block (see photo) - Material: steel, red painted - Weight/piece: approx. 8-12 kg Collection/Transport: Self-collection. Individual sale possible. Shipping via freight forwarder on a pallet can be arranged. Note: EUR 1,100 net, negotiable, for the entire set; individual sale possible (approx. EUR 150-180 per piece).

Condition: used, This listing is for Akta Process sample pump. The unit is in full working condition and ready for immediate use. Isdpfexhga Rsx Acrjth High-performance liquid chromatography sample automation pump optimized for scaling up biopharmaceutical manufacturing and reliable laboratory fluid delivery. [[1](?selectedProduct=28956095), [2](), [3]()] Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) [[1](), [2]()] Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. [[1](), [2]()] Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Condition: Direct-from-Bench (Decontaminated/Original) • Source Pedigree: Biotech / Research Facility

Condition: like new (used), Year of construction: 2018, operating hours: 3,769 h, Atlas Copco GA 5 FF screw compressor including refrigerant dryer. Motor & Performance: • Rated power, main motor: 5.5 kW (7.5 HP) • Motor efficiency: Typically IE3 (protection class IP55) • Voltage / Frequency: 400 V / 50 Hz (3 phases) • Starting method: Star-delta Pressure and Flow Rate: 7.5 bar 15.0 l/s (900 l/min) ~54.0 m3/h 8.5 bar 13.2 l/s (792 l/min) ~47.5 m3/h 10 bar 12.5 l/s (750 l/min) ~45.0 m3/h 13 bar 8.4 l/s (504 l/min) ~30.2 m3/h Tank capacity: 270 l Integrated refrigerant dryer: • Pressure dew point: +3 °C • Additional power consumption: approx. 0.22 kW • Condensate drain: Electronic, loss-free Noise Level & Environment • Sound level: 60 to 63 dB(A) (very quiet due to complete encapsulation, installation directly at the workstation is possible) • Permissible ambient temperature: +1 °C to +46 °C Dimensions & Weight: • Length x Width x Height: approx. 1500 mm x 730 mm x 1710 mm • Weight: approx. 360 kg Control: • Type: Elektronikon Iedpfx Acey T Icgjrjth Operating hours: 1170 h Year of manufacture: 2018 Price: 5000.-