Used Tauring Alfa 50H2 for sale (241)

Condition: good (used), NNP cooking kettles Nodotu N D Hepfx Airswn Stainless, cooking and mixing system on skid, two 350L mixing tanks, with Alfa Laval GM1 centrifugal pump and Randolph 600 series peristaltic pump, jacketed tanks, adjustable temperature and variable speed pumps, 3Ph

Condition: used, Spirax Sarco Clean Steam Generator Station – 700 kg/h – Year of Manufacture 2019 For sale is a steam-heated clean steam generator station from the manufacturer Spirax Sarco with a clean steam capacity of approximately 700 kg/h. The system consists of a horizontal clean steam generator with an integrated tube bundle heat exchanger, a condensate cooler for feedwater preheating, and a fresh water feed via a control valve. Technical Data Manufacturer: Spirax Sarco GmbH System Type: Clean Steam Generator Station Serial Number: 2019/955 Year of Manufacture: 2019 (according to serial number, to be confirmed) Clean Steam Capacity: approx. 700 kg/h Clean Steam Pressure: 0.8 bar(g) Heating Steam Quantity: approx. 770 kg/h Heating Steam Pressure: approx. 3.5 bar(g) Total Power Output according to Design Data: 531 kW Feedwater Inlet: 15 °C Minimum Feedwater Pressure: 2 bar(g) Feedwater Quality: according to EN 285 Clean Steam Generator Design: horizontal, with pull-out U-tube bundle Design Pressure, Tube Side: 10 bar Design Pressure, Shell Side: 3 bar Design Temperature: 200 °C each Diameter: approx. 711 mm Length: approx. 2,600 mm Height: approx. 1,400 mm Thermal Output: 452 kW Tube Bundle: Stainless steel 1.4571 Insulation: approx. 100 mm mineral wool with galvanized steel sheet cladding Condensate Cooler / Feedwater Preheating Type: Plate heat exchanger Type: Alfa Nova 27-10H Manufacturer: Alfa Laval Capacity: 61 kW Design Pressure: 25 bar Design Temperature: 225 °C Condensate Quantity: approx. 770 kg/h Feedwater Quantity: approx. 700 kg/h Equipment Control cabinet and control system Electropneumatic pressure control valve Safety and shut-off valves Condensate trap and drain group Pressure sensors and manometers Level control with low water alarm Piping and connecting fittings Base frame with support saddles The system was designed and manufactured in accordance with the European Pressure Equipment Directive applicable at the time of manufacture. Further technical documentation is available upon request. Nodewgkyhopfx Airjwn Inspection possible by appointment.

Condition: ready for operation (used), Bewo Mod 270 Semi-automatic Hydraulic Bandsaw Metal Saw #2050230 Maximum clamping: 210x210mm Dimensions: 130cm x 80cm x 140cm (LxWxH) 380v Variable cutting speed With coolant pump With extra saw blade Video available on our YouTube channel. Location: Budel, Netherlands Transport available at additional cost Nwjdpfx Aioylppwerjn Call or email for more information Also check out our other listings We are looking for industrial machines all year round. If you have surplus machines, send us an email with photos and information. The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition and wear are in line with its age; used machines are sold without warranty. The displayed price is exclusive of VAT (unless otherwise stated).

Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: 1) CT-6 Centritherm evaporator mounted on skid Nodpfx Aolc Dwvsirown 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel 4) Duplex filter 5) Feed pump model 6) Concentrate pump model 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping 11) Tools for lifting cones and the bowl 12) Original technical documentation in German.

Condition: good (used), functionality: fully functional, input voltage: 380 V, year of last overhaul: 2023, input frequency: 50 Hz, empty load weight: 960 kg, type of input current: three-phase, power: 1.15 kW (1.56 HP), Mixer with fixed stainless steel bowl, NN, older model, made in Italy, bowl capacity of up to 200 kg dough, maximum flour capacity of the bowl: 125 kg; maximum power through 1 ALFA MEC 100 motor of 700 rotations per minute, power 1.1 kW, 380V power supply but can also be adapted to 220 V (from the motor); ideal for pizza and bread dough, operation with relatively low noise, 2 speed levels, bowl operation in 2 possible directions, operating time adjustable on the main working direction with the help of a (functional) timer, functional emergency stop, metal frame /chassis cast, extremely stable, stainless steel safety cover, the cover is easy to open and close, the device stops after opening the safety cover (travel limiter), electrical connection: 3N/PE / N / PE 400V / 50 Hz The mixer is produced according to the hygiene and safety regulations in force. The machine complies with European food standards. Nwsdpfx Aijra Ntrsron Benefits simple operation, easy to clean, very resistant and durable, despite its age, it has little electronics and the mechanical part is robust, it can have a very long life. External dimensions W x H x H: mm x mm x mm NOTE: the machine has been overhauled on the electrical and mechanical side. Sales price: 2.350 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Centrifugal pumps for pumping beer, water or other low-viscosity media. Available in many performance and pressure ranges. Manufacturer: Hilge/Grundfos/KSB/Fristam/Alfa Laval Please let us know your application (medium, capacity, delivery head) and we will find a suitable solution for you. Material: Pump housing and impeller in stainless steel Position: free standing/mounted on base Features: Connections as flange connection or milk pipe screw connection, optional: self-priming/splash guard/chassis/frequency converter Nsdsw Uvbfepfx Airown

Condition: used, mileage: 5,02,894 km, power: 265 kW (360.30 HP), first registration: 02/2013, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 06/2026, color: white, gearing type: automatic, emission class: euro5, loading space length: 8,400 mm, loading space width: 2,470 mm, Equipment: ABS, air conditioning, crane, * Sun visor * ABS * Right-side turn assist * Radio * On-board computer * Reversing camera * Cruise control * Air horns * Hill-start assist * Electric windows * Electrically adjustable mirrors Nwedpjy Iudaefx Airon * Heated mirrors * Central locking * Fog lights * Roof hatch * Driver comfort seat * Seat heating * Rear axle differential lock * Lift axle * Steel bumper * Amber rotating beacon * Top air intake * Exhaust behind cab * Ball head coupling * 12-speed * Suspension: leaf/air * Payload: 14,285 kg * Continuous brake: engine brake ----Special body: Crane: Palfinger PK 26002-EHB (Power Link Plus), max. lifting capacity 8.5 t, foldable, radio remote control + walk-around control, 3x hydraulic extension, fully hydraulic outriggers, oil cooler, 6th & 7th hydraulic control circuits available. Read load chart: Lifts 5.7 t at 4.2 m, 3.8 t at 6.1 m, 2.85 t at 8 m, 2.25 t at 10.1 m. ----Body: Open flatbed (loading height approx. 1,120 mm), rear sloped (drive-on height approx. 900 mm), steel front wall, wooden floor, lashing rings, removable 4-piece aluminium side walls, removable centre stakes, 2 pairs of container locks (twist lock). Hydraulic mesh loading ramp, full width, rear support. Hydraulic cable winch, cable diameter 14 mm, cable length 50 m, max. breaking load 137 kN. ----EEV Class 1 Sale to businesses only. FOR EXPORT, ONLY THE NET PRICE MUST BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. All sales contracts, invoices, pro forma invoices, orders, and sales discussions are based on our terms and conditions (see imprint).

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 286.001.911.20, working width: 3,000 mm, working length: 6,000 mm, controller model: Global Control S mit 15 Zoll Farb-Touchscreen, No minimum bid – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 6,000 mm Number of cutting torches: 2 Gas flow regulation: available MACHINE DETAILS Installation footprint: 9,000 x 5,000 x 2,000 mm Control: Global Control S with 15-inch color touchscreen Electrical Data Voltage: 3 x 400 V PE/N Frequency: 50 Hz Power: 9 kVA ATTENTION: The Zinser cutting bed is not included in the offer! EQUIPMENT according to the original invoice – details provided without guarantee Joystick and handwheel for Global Control S panel Nsdoyi Ub Hjpfx Airjwn Cooling system for the control cabinet Laser diode Heat shield plate without air cooling Track for double-sided longitudinal drive HEB 9 m OmniFlow oxy-fuel supply up to 70 m³/h ALFA machine cutting torch with internal ignition SmartLifter 200 SensoMat ARKI Full gas addressability Light barrier systems Safety device: wheel arch foot switch Energy supply via 9 m energy chain for oxy-fuel Drag chain driver Further technical data from the manufacturer – details provided without guarantee: Track gauge: 4,000 mm Chain height: 500 mm Positioning speed: 50 m/min Operating speed: max. 35 m/min Dimensions & Weight Dimensions (L x W x H): 1,940 x 5,070 x 1,980 mm Machine weight: 2,200 kg

Condition: used, Flash pasteurizer for pasteurizing liquid food products. With pumps, preheater and control unit mounted on a common frame. Designed for a capacity of 1000 liters/hour. Additional title: with pressure tank Nwodpfxjw Tlq Hj Airjn Capacity: 1000 l/h Compressed air: 6 bar for control air Operation / Control: HMI on switch cabinet Base construction: mounted on frame Features: 2 x Alfa Laval plate heat exchangers, 2 x centrifugal pumps, pressure compensation tank, sight glass, temperature and pressure sensors, various other fittings and valves, HMI

Condition: good (used), Boston Tiegel Hohner Alfa 2, machine number 540, working size A4+, with rollers, ink box, in good condition, immediately available. Nwsdpfeh Dy Hqox Airjn Various other models are available with different equipment. If you are interested, we will also be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our premises, by prior appointment.

Condition: used, functionality: fully functional, power: 26 kW (35.35 HP), first registration: 09/2015, fuel type: diesel, color: red, axle configuration: 4x4, operation weight: 1,500 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, Year of construction: 2015, operating hours: 2,398 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, Self-propelled work machine, mower: + Toro + Groundsmaster 360 + Year of manufacture: 2015 + 2,398 operating hours + 4-cylinder Kubota diesel engine, 1,498 cc, 35 HP + All-wheel drive + Selectable all-wheel steering + Hydrostatic drive, max speed 20 km/h + Front and mid-mount lift arms + Front hydraulics + PTO (power take-off) + Beacon lights + Full cab with opening windows + Air conditioning / heating + Hand throttle + Toro rotary mower deck with 3 blades, 180 cm cutting width Njdpex E R Enofx Airown Optional: + Müthing front mulcher + Type MU-FM + 160 cm working width + 240 kg + Year of manufacture: 2015 Municipal vehicle from first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos excepted, subject to prior sale!

Condition: new, Year of construction: 2022, functionality: fully functional, power: 2.6 kW (3.54 HP), overall weight: 35 kg, type of input current: three-phase, input voltage: 400 V, volume flow: 6,630 m³/h, fuel type: electric, ebm-papst: K3G450-PW12-07 centrifugal fan, radial fan, air supply fan, exhaust fan, high-pressure fan The impeller, motor and electronics are optimally matched to each other, resulting in an overall efficiency of well over 60%. The external rotor GreenTech EC motor contributes significantly to this efficiency. NEW!!! in stock: 3 pieces Manufacturer: ebm-papst Type: K3G450-PW12-07 Year of manufacture: 2022 Speed: 2040 min⁻¹ (revolutions per minute)​ Air flow q V: 6630 m³/h Air pressure: mac 948 Pascal Place of origin: Germany​ Electrical parameters Power supply: 3 phases, 380-480V AC, 50/60Hz​ Current consumption: 4.1A / 400V​ Nwodpsxt I Nkefx Airjn Power: 2650W / 400V​ Other characteristics Efficiency: 70% (A, static)​ IP protection: IP55​ VSD (variable speed drive) integrated​ Ins.CI.F, AO, Electronically protected​ Standards: CE, EAC, UKCA, cRUus Dimensions Frame (height x width) 630 x 630 mm Impulse diameter: 450 mm Weight: 34.5 kg

Condition: used, Kyocera TASKalfa 2553ci for Sale Several units are available from stock, all with less than 80,000 prints. Main features: - Colour multifunction printer: print, copy and scan - A3 / A4 - Up to 25 ppm A4 / 12 ppm A3 - Up to 1,200 × 1,200 dpi print resolution - 10.1" colour touchscreen Nsdpfxsz Iznao Airswn - Automatic duplex printing - Paper weights up to 300 g/m² Kyocera Document Solutions The machines are in good condition, fully tested and cleaned, and delivered ready for use. For any questions or further information, please feel free to contact me.

Condition: good (used), Waste oil collection device, mobile oil collection container Nwjdpfxeb A Hdxe Airen -Volume: 90 l -Dimensions: 650/450/H1200 mm -Weight: 35 kg

Condition: used, Year of construction: 2018, machine/vehicle number: M221, Used Filling Monoblock Alfatek Easy Compact 2018Used Filling Monoblock Alfatek Easy Compact 2018MONOBLOCK Mod. ROBOT COMPACT 7/1Machine suitable for treating refermented beer in the bottle. Machine suitable for treating Steinie Flasche 0.33 I bottles Height 174mm — diameter 70mmComposition:• Elvira LP Series filler with 7 filling valves Nedpfjvgukrex Airown • Single-head crown capper Mod. “Eagle/C”Max. production: 500/1000 bph with 330 cc bottles and product without foam. Production may vary according to the type of product to be bottled.Power supply: 380V three-phase * N — 50hz • Electrical panel position: Right • Control panel nameplate language: Italian Worktop: 1000 + -50 • Bottle entry and exit: on the rightBottle size:• Height: from 174 to 310 rams. Diameter: 58 to 110mm. • Bottle neck diameter: from 16 mm (int.) to 30 mm (ext.) Level variation in the bottle: from 40 min to 75 mm Bottle neck height: H. level + 30 minThe Used Filling Monoblock Alfatek Easy Compact can only be unloaded with a forklift of adequate capacity and forks of no less than 1,400 mm in length. Complete with safety guards in accordance with CE standards.ACCESSORIES INCLUDED IN THE PRICE:CE-rated safety guards; Equipment for n. 1 cylindrical bottle format; Towing head. return head, bottle arrival table.

Condition: new, maximum load weight: 12,451 kg, overall weight: 16,000 kg, axle configuration: 3 axles, loading space length: 9,800 mm, Year of construction: 2025, Equipment: ABS, * Extendable loading platform by 90 cm * Knorr air pressure braking system * 3 axles with drum brakes * Front and rear grilles ----* Tire dimension: Nwedpfx Aisyvnwioren * Technical total weight: 16000 kg * Tare weight: 3540 kg * Overall length: ----Vehicle number: 11937----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed. -----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of the rest. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export handling, arranging financing, applying for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services. -----Your VTS Team

Condition: good (used), Euroventilatori XTTRC801LG0 Centrifugal fan High output centrifugal fan, mounted on stand with 37Kw motor, 3Ph Nsdpfxetwdq To Airown

Condition: used, Year of construction: 2018, Overview This atmospheric filling machine was manufactured by Alfatek in 2018 and is designed for filling 330 ml bottles with crown caps. The machine achieves an output of 800-1,000 bottles per hour and was last used for beer filling. Nwsdpfsv Rq Dpjx Airen Technical details  - Filling principle: Atmospheric - Output: 800-1,000 bottles/hour - Bottle format: 330ml - Capper: 26mm crown cap

Condition: used, Year of construction: 2013, operating hours: 1,700 h, machine/vehicle number: M292, Used Filling Monoblock Alfatek for olive oil 1500 bph General Features of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH The ALFATEK MBV 9/1 VOLUMETRICA SABRY filling monoblock, built in 2013, offers an efficient and reliable solution for bottling edible oil. It operates at a speed of 1500 bottles per hour, with clockwise rotation and a fully automated workflow. In fact, the machine currently runs in active production, having completed approximately 1700 operating hours. Moreover, it includes all safety protections, user manuals. Container Compatibility and Supported Formats The Used Filling Monoblock Alfatek for Olive Oil 1500 BPH handles a wide variety of containers. Specifically, it works with both PET bottles and metal cans, supporting the following formats: PET 138x138xh253 mm PET 148x148xh320 mm PET 81x81xh236 mm PET 63x63xh184 mm Cans 150x92xh192 mm Cans 150x92xh261 mm Njdpfxewiu Rve Airswn Cans 149x120xh315 mm Consequently, the machine adapts easily to diverse packaging needs. Whether the production involves small household bottles or larger industrial formats, this monoblock provides the required flexibility. Additionally, this versatility reduces the need for multiple machines, optimizing both space and investment. Filling Section: Volumetric Technology The filling section of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH uses 9 volumetric valves. These valves deliver accurate and repeatable dosing, which is especially important for high-viscosity products like olive oil. Notably, the system uses fixed valves and operates in a non-isobaric configuration. Therefore, it suits still liquids and avoids the complexities associated with pressurized systems. Furthermore, the volumetric method helps maintain product integrity while minimizing waste and overfill. Press-On Capping: Compatibility and Sizes The machine applies plastic press-on caps using one capping head, which supports multiple cap dimensions: Ø51.5 x 23 mm Ø37.5 x 22 mm

Condition: new, Centauro ALFA NC Machining Centre For Joinery Components & Doors A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine can be equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Optional additional machining operations include producing a square corner hinge plate recess or lock face recess by means of the additional milling unit. The operator simply selects in the program if they want a radius or square corner and the machine does the rest. In addition the same milling head can be used to make the small pilot hole for hinge screws etc. There is also the possibility to produce a square end tenon, round end tenon or dovetail / dovetail slot when the special front table is fitted. Lastly on request the machine can be configured to import ISO files from external design software (e.g ARTCAM Express) to enable detailed engraving of items such as name plates etc. Axis capacity - X 2800mm, Y 180mm, Z 150mm. Nedpfsb Tmngjx Airswn (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain.

Condition: ready for operation (used), Fanuc A06B-6050-H203 Velocity Control Unit, serial number as shown in the photo, used, professionally and completely refurbished and tested, with a 6-month warranty, 100% functional, scope of delivery as shown in the photos. Nodpoi D Uwkjfx Airswn

Condition: like new (used), Year of construction: 2004, functionality: fully functional, GANTRY ROTOTRANSLATING TABLE MILLING MACHINE EQUIPPED WITH SELCA 4060 PD NUMERICAL CONTROL X- AXIS CHAIR 1,600 mm. Nwedpfx Aiet I Tuzeren Y AXIS COURSE 2,000 + 500 mm. for tool change Z AXIS THROUGH 900 mm. ROTARY TABLE DIMENSION (C AXIS) 1,200 X 1,200 mm. MAXIMUM LOADABLE WEIGHT : Kg. 2.000 T-slots No. 9 slots width 18 mm. Distance between columns 1,550 mm. Electrospindle power S1 28 Kw at 3,000 rpm. 24-position tool changer SELCA numerical control type 4060 PD electric cabinet cooling unit (airc) "Spray mist" type tool cooling system (SPR) Laser system for tool integrity check measurement

Condition: good (used), The deep struts are suitable for a stand depth of 1,050 mm and a crossbar width of max. 40 mm. The scope of delivery includes: Nsdpfx Aijlp N Utorjwn 180 x deep strut, used Material color: orange Overall length: approx. 1,058 mm For stand depth: approx. 1,050 mm Clear span: approx. 960 mm Technical data for the deep strut: Racking system: Nedcon Profile dimensions: 60 x 40 mm Crossbar support: approx. 43 mm Profile material thickness: approx. 1.50 mm Support material thickness: approx. 4.00 mm Weight per piece: approx. 2.50 kg Note: The price is only valid for a minimum purchase of 180 pieces (1 pallet).

Condition: new, Band saw blade Make Röntgen Type bi-alfa cobalt Dimensions :4860 x 34 x 1.1 mm Njdpfx Aierwl R Nsrewn 3/4 Combi 10 unused, out of magazine

Condition: used, Technical data for balancing plate: Manufacturer: Meta Scope of delivery: 01x balancing plate, used Material colour: sendzimir galvanized Dimensions: 140 x 140 mm Material thickness: approx. 3.0 mm Borehole Ø: approx. 11 mm Hole spacing (center-to-center): approx. 90 mm Weight: 0.45 kg | piece Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Nwodpfex Trhtjx Airen Mr: Falk Deutsch General information about the item: This item is offered for collection only. Any requested transport or shipment of this item is subject to additional costs, which must be individually requested from us depending on the delivery location or scope of delivery.