Used Terumo Teruflex Transfer Bag 600 Ml for sale (17,258)

Condition: excellent (used), Weiss Umwelttechnik WT-600/70/5 Temperature Test Chamber -70°C to +180°C Water-cooled Available for sale is a pre-owned temperature test chamber from Weiss Umwelttechnik. The unit is fully functional and has been tested. This is a temperature-only test chamber without humidity control. The chamber is suitable for testing components, electronics, and materials under extreme temperature conditions. It is widely used in industry, development, and quality assurance processes. The temperature range spans from -70°C to +180°C. The device offers rapid heating and cooling rates and uses internal air circulation to ensure uniform temperature distribution within the chamber. Cable ports of 125 mm and 50 mm are included. Technical data: Model: WT-600/70/5 Cooling / heating operation: -70°C to +180°C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 6 K/min External dimensions (with hinges and door lock): Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions (without hinges and door lock): Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber volume: approx. 600 liters Electrical connection: 3/N/PE AC 400V ±10% 50Hz Nominal power: 16 kW Nominal current: 19 A Main fuse required: 29 A slow-blow Permissible test load: Total rack capacity: 80 kg Chamber floor: 80 kg, Shelf: 40 kg Refrigerant: R 404A/R23 Weight: 675 kg For your safety as a buyer, please note the following: The following procedures are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Godpfx Aljy At Sxe Aoud Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Weiss Spray Water Test Unit Type: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test unit from the manufacturer Weiss Umwelttechnik. The unit is used to perform standardized water, spray water, and ingress protection tests according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch control panel. Test sequences can be automated. Unit Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800-S Spray Water Test Unit Test types: IPX1 IPX2 IPX3 IPX4 IPX4K IPX9K Stainless steel test chamber Rotating test table Swivel arm system Water circulation Existing test accessories Electrical data Supply voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram no.: 82962 CE marking available Water supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: approx. 80 to 100 bar adjustable Technical data Turntable speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10 °C to 35 °C Noise level: approx. 88 dB(A) Heat dissipation to the environment: Average approx. 1 kW Maximum approx. 3.5 kW Equipment Touch control panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Gedszachcjpfx Al Asud Flow meter ESD earth bonding point CE marking Robust industrial design Dimensions / Weight Test chamber SWT 600/800: approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door locking: approx. 2,350 x 2,400 x 1,850 mm Weight of test chamber: approx. 650 kg Dimensions of high-pressure unit: approx. 850 x 1,200 x 800 mm Weight of high-pressure unit: approx. 380 kg Total weight: approx. 1,030 kg Documents Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories Nozzle ring / spray ring Test and spray components Swivel arm accessories Flow meter Connection components Tools and keys Documentation Condition Used unit from industrial use. Visual condition see pictures. The unit can be switched on. Display and user interface are functional and visible. Further technical testing, calibration or complete functional testing has not been carried out. Inspection and testing on site possible and desired after prior appointment. Scope of supply Weiss Umwelttechnik SWT 600/800-S spray water test unit High-pressure unit Turntable and swivel arm Test and spray accessories as shown in the pictures Operating manual and documentation Accessories as shown in the pictures The table shown in the photos is not included in the scope of supply. Loading possible by arrangement. Transport and shipping by a suitable freight forwarder required. Dimensions, weights and technical data partially taken from documents. Information may vary. Commercial sale without warranty. Subject to change, errors and prior sale.

Condition: excellent (used), CTS Climate Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature, climate, and stress screening tests. For use in industry, research, and quality assurance. Operating Condition Display: Manual mode / Warning (Drain water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Compressor pre-cooling: 11,432 h Pump circulation: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Gusdpsy H Hmwofx Al Ajd Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Features Observation window Stainless steel test chamber CTS touch/LCD control panel Programmable operation Specimen protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refilling possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial version Feedthroughs 1x NW 50 2x NW 125 Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1120 x 1875 mm Weight Approx. 750 kg Scope of Delivery CTS Climate Test Chamber CS-70/600-5/S Documentation / Test certificates (if available) Pre-shipment Service (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Visual condition see pictures. Note Used equipment, sale without warranty. Inspection by arrangement possible. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Completely new resonator available at the end of 2025 with 6,000 watts + New laser cutting head (investment approx. EUR 190,000 in 2025) Immediately available - inspection possible Manufacturer: Bystronic Model: BySprint fiber 3015 Year of manufacture: 2022 / new resonator and cutting head in 2025 Gedpfozh E Ugsx Al Ajud Sheet metal format: Max. format, 4,000 x 2,000 mm Operating hours: After upgrade at the end of 2025: approx. 1,400 operating hours, approx. 550 cutting hours Before upgrade until 2025: approx. 17,700 operating hours, approx. 7,500 cutting hours SPECIAL EQUIPMENT: - Cut Control Fiber - Part and cross conveyors in the cutting area - Dust extraction system with 200-liter drum adapter - Upgrade in 2025: 6,000-watt fiber laser with new cutting head Standard equipment: BySprint Fiber 4020 Pallet changer system with 2 pallets Closed enclosure/roof Scrap conveyor with rollers CNC control and cabinet Touchscreen with user interface for ByVision Operation and comfort Maintenance Messenger Restart Manager System Manager Handheld operating device ByHand Cutting parameter assistant Uninterruptible power supply (UPS) Cutting bridge OPC interface cutting Cutting head Piercing Jet ByPos Fiber Detection Eye Nozzle cleaning Scanning Fiber laser sources Tank heater Tropicalization Interface to automation/handling Cooler Operator protection in the cutting area Operator protection in the loading/unloading area Voltage 400V / 50Hz Compressed air (machine incl. laser source and cooler) Material specification Part tolerances and cut surface quality Cutting gas supply and cutter quality TECHNICAL DATA: Maximum positioning speed parallel to the axes X/Y: 100 m/min Maximum positioning speed simultaneously: 140 m/min Positioning deviation Pa (VDI/DGQ 3441): +/- 0.1 mm Positioning scatter Ps (VDI/DGQ 3441): +/- 0.05 mm Edge detection accuracy: +/- 0.5 mm Maximum workpiece weight: 1580 kg Table change time: 35 seconds Laser power: 6,000 watts Maximum sheet metal thickness: Steel: 30 mm Stainless steel: 25 mm Aluminum: 20 mm Brass: 15 mm Copper: 15 mm Machine weight (without extraction, cooler): approx. 15,000 kg Machine dimensions, approx.: 13,743 mm length, 6,670 mm width, 2,565 mm height This used machine can be inspected under production conditions. All information is without guarantee - sale is made excluding any guarantees or warranties. Subject to prior sale.

Condition: used, Weiss Type: WK111-600 Weiss Climate Test Chamber, Air-cooled Performance Data for Temperature Tests: Temperature range: -5°C to +90°C Temporal temperature fluctuation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min Performance Data for Climatic Tests: Temperature range: +10 to +90°C Humidity range: 10 to 98% r.h. Temporal temperature fluctuation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temporal humidity fluctuation: ±1 to ±3% Test Chamber Dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing Dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Access Ports: 1 access port Ø 50 mm on the left side installed 1 access port Ø 125 mm on the right side installed Power Supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 kW Rated current: 10.0 A Refrigerant: R 404 A Capacity: 600 liters Weight: 540 kg For your security as a buyer, please note the following information! The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) If you have further questions, feel free to contact us by phone. Gusdpfx Ajziyxcjl Ajd

Condition: excellent (used), CTS Temperature Test Chamber We offer you here a CTS temperature test chamber. Water-cooled Model series: T-40/600 Including metal support bars to increase floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Gujdpfsziyw Sjx Al Ajd Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Nominal power: approx. 5.5 kW Nominal current: approx. 8.5 A Refrigerant: R404A Weight: 550 kg Type: T-40/600 /011232 Important information for you as a buyer! The following steps are carried out on all our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refilled with legally-compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored by calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the data!) If you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Gjdpfoziywrsx Al Aeud Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), CTS Temperature Test Chamber We are offering you a CTS temperature test chamber. Water-cooled CTS Temperature Test Chamber Technical specifications: Temperature operating range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 3.5 K/min Temperature stability, temporal: ≤± 0.3 K Dimensions: Test volume: 600 liters Test chamber internal dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Connected load: 8.2 kW, 14.2 A Gedpfsziygyjx Al Aeud Refrigerant: R404A / R23 Weight: 600 kg Model: T-70/600 Important Information for Buyers! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Technical data, specifications, and information are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), We are offering a temperature test chamber here. Gedsziygmepfx Al Aeud Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Unit section: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Gujdpfx Aoziycbjl Aed Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Gjdpfxsziyb Rs Al Asud Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: used, 4-bag dust extractor SIA 8/26 Guedpszkh Etofx Al Asd

Condition: used, continuous grilling line all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable nett length 1800 mm belt width 600 mm electrically heated 93 kW belt washing system temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed dimensions (l x w x h) : ± 3.400 x 1.800 x 2.000 mm Gujdozktzajpfx Al Asd

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A Guedpfxozkty No Al Aod dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm

Condition: used, Year of construction: 2000, Kellenberger 600 U cylindrical grinding machine Condition: Used Year of manufacture: 2000 Technical data: Table: Distance between centers: 600 mm Travel: 900 mm Travel per handwheel revolution, coarse/fine: 20 / 2.5 mm Travel per division on the handwheel: 0.05 mm Speed, hydraulically continuously variable: 0.02 - 6 m/min Reversal travel, minimum: 2.5 mm Dwell time during reversal, continuously variable: 0 - 5 sec Swiveling range: 11 degrees Cross slide: Travel with feed handwheel in fine or coarse mode: 220 mm Travel per handwheel revolution, coarse/fine: 8 / 1 mm/ø Division on the handwheel: 5 µm/ø Division with micrometer adjustment: 1 µm/ø Rapid traverse, hydraulically: 40 mm Gsdpfxjy T E Rze Al Aoud Feed, hydraulically: 0.95 mm/ø Form grinding: Feed rate: 0.25 - 25 µm/sec Surface grinding: Feed increments per table reversal: 130 µm/ø Grinding spindle head: Grinding wheel for external cylindrical grinding: 400 x 50 x 127 mm

Year of construction: 2004, condition: excellent (used), pneumatic race LARIUS 10:1 Godpfx Alowqx H Re Aoud For sale pneumatic press from the renowned company LARIUS, manufactured in Italy. The device is designed for pressing high-viscosity liquids - ideal for greases, adhesives, industrial paints, silicones, etc. Technical data: • Ratio: 10:1 • Max. liquid pressure: 70 bar / 1015 psi • Air working pressure: 3–7 bar (40–100 psi) • Capacity: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Production: LARIUS - Italy Very good condition

Condition: good (used), Year of construction: 2021, operating hours: 5,500 h, grinding length: 600 mm, grinding diameter: 440 mm, feed length X-axis: 325 mm, feed length Z-axis: 750 mm, Control system, serial number and main data o Control system: SIEMENS, Type 840 D SL o Operating hours recorded: 5,475 Travel ranges o X-axis travel: 325 mm o Z-axis travel: 750 mm Axis speeds o X and Z axes max.: 15,000 mm/min o X and Z axes min.: 0.01 mm/min Working area o Max. grinding length: 600 mm o Max. grinding diameter: 440 mm o Min. grinding diameter: 10 mm Performance data o Grinding spindle: 1 tool for external cylindrical grinding o Tool dimensions: Ø 610 x 160 x 304.8 mm o Cutting speed: 60 m/s o Power: 15 kW Workpiece spindle o Speed range: 30 - 5,000 min⁻¹ o Taper: 5 Morse Tailstock o Design: pneumatic o Max. quill stroke: 80 mm o Taper: 5 Morse Connection values o 400 V / 50 Hz / 71 A / 43 kW Automation / Peripherals • Handling robot, YASKAWA, Type YR-1-06VXH12-A00, year of manufacture 2022, serial number 6V2272528290001 • Automation system / workpiece storage, EGS AUTOMATION DANOBAT, Type CG600-BL1, year of manufacture 2023, serial number 190605-6, 2-position • Filter, 3FS, Type M1600, No. 565209, year of manufacture 2021, weight 85 kg • Oil band filter, MICROFILTER, Type EASYBAND 150, serial number 0202, year of manufacture 2021 • Pump, REXROTH, Type HM-46 Godpfx Aozgdtljl Ajud

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Gjdpfxsvuuh Tj Al Aeud Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: good (used), Year of construction: 2022, operating hours: 7,400 h, machine/vehicle number: 100644, grinding length: 600 mm, workpiece length between centers: 600 mm, feed length X-axis: 650 mm, feed length Z-axis: 1,000 mm, overall weight: 10,000 kg, j.stumpf [at] ivg.auction Control, monitoring, and operating data o NC control: SIEMENS, Type 840 D SL o Year of manufacture: 2022 o Serial number: 100644 o Recorded operating hours: 7,315 o Monitoring system: MARPOSS, Type P7 Travel distances o X-axis: 650 mm o Z-axis: 1,000 mm Axis speeds o X and Z axes max.: 15,000 mm/min o X and Z axes min.: 0.01 mm/min Working area o Max. grinding length: 600 mm o Center distance: 225 mm Performance data Gedpfx Alezgbw Is Ajud o Grinding spindle: 1 tool for external cylindrical grinding o Tool dimensions: Ø 760 x 250 x Ø 304.8 mm o Cutting speed: 60 m/s o Power: 30 kW o Max. grinding wheel speed according to text: approx. 80 m/s Workpiece spindle o Axis speed: 5 - 1,000 min⁻¹ o Taper: 5 Morse o Motor torque: 16 N.m Tailstock & tool post o Taper: 5 Morse o Max. tailstock quill travel: 80 mm o Diamond grinding wheel profiling tool Saddle drives o Torque motor X-axis: 28 N.m o Torque motor Z-axis: 16 N.m Operating data o Year of manufacture: 2022 o Recorded operating hours: 7,315 o Operating pressure: approx. 6 bar General data o 3 x 400 VAC / 50 Hz / 72 kW / 119 A o Weight: 10,000 kg Peripherals • Automated workpiece removal station, JOVI, Type 1113B, year of manufacture 2022, weight approx. 300 kg • Air filter unit, IFS, Type M 1600, year of manufacture 2022, serial no. 567663, weight approx. 85 kg, connection power 380 - 460 V, 50 / 60 Hz, 0.7 kW, 1.5 - 2.1 A • Hydraulic unit, REXROTH, Type Deposito HE-16120 • Coolant filter unit, MICRONFILTER, Type EASY 250 / KMT350, year of manufacture 2022, serial no. 0201, tank volume approx. 2,300 l, connection power 400 V / 50 Hz, 2.44 kW • Immersion cooler, HASCH, Type MCS-120ST-05AOP6R7S7UZ1-3405C, year of manufacture 2022, serial no. 1003220300954, weight approx. 206 kg • Magnetic separator, MICRONFILTER, Type KMT350, serial no. 0211 • Tool loading unit, DANOBAT, Type rotary table lift, year of manufacture 2022, serial no. 3130490901, weight approx. 350 kg, max. load capacity approx. 360 kg

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,900 h, load capacity: 5,000 kg, lifting height: 4,675 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,426 mm, drive type: Diesel, Diesel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 40 - 60% 3rd valve, 4th valve, rear work light, front work light, heater, compliant with German Road Traffic Regulations (STVZO), full cabin, air conditioning, full free lift, safety light, rotating beacon. Gsdpfx Aeziq E Tel Ajud

Condition: used, Year of construction: 2015, functionality: fully functional, Hard Metal Carbide Grinding Lapping Machine Guodpfx Aeziw Eajl Aod Magnetic base Fully PLC controlled Grinding Length Capacity 600 mm Grinding Motor 2.20 kW / 3 hp External Diameter of Grinding Wheel 150 mm / 6” Grinding Wheel Speed 3450 rpm Feed/Pump Gear Motor 0.25 kW / .3 hp Grinding Wheel Feed per Stroke Manual 0.05 mm Coolant Pump Capacity 20 L/min Magnetic Chuck Width 90 mm / 3.5” Carriage Feed Speed 1.0 mpm Electrics 400/3/50

Condition: good (used), Year of construction: 2022, operating hours: 2,800 h, grinding length: 600 mm, grinding wheel diameter: 450 mm, total width: 3,300 mm, total length: 2,900 mm, total height: 1,900 mm, grinding diameter: 290 mm, quill stroke: 80 mm, distance between centers: 600 mm, grinding wheel width: 50 mm, feed length X-axis: 300 mm, feed length Z-axis: 800 mm, grinding spindle motor power: 25,000 W, grinding spindle speed: 4,500 rpm, j.stumpf [at] ivg.auction Technical Data Year of manufacture, serial number, and operating hours o Year of manufacture: 2022 o Operating hours recorded: 2,737 Control and monitoring o Control: SIEMENS, Type SINUMERIK o Monitoring system: MARPOSS, Type P7 Travel distances o X-axis: 300 mm o Z-axis: 800 mm Axis speeds o X and Z axes max.: 15,000 mm/min o X and Z axes min.: 0.010 mm/min Work area o Max. grinding length: 600 mm o Center height above the table: 150 mm o Max. diameter of oscillation above the table: 290 mm o Workpiece weight: approx. 50 kg Performance data o Grinding wheel speed: up to 120 m/s o Max. grinding wheel dimensions: Ø 450 x 50 mm o Workpiece spindle speed: 30 - 2,000 rpm o Grinding wheel drive: 25 kW / 70 Nm / max. 4,500 min⁻¹ o Workpiece spindle: 15 kW / 24 Nm / max. 5,000 min⁻¹ Hydraulic steady rest and dresser o Arbor taper: MK4 o Max. quill stroke: 80 mm o Diamond dressing disc, outer Ø 100 mm Workpiece spindle o Arbor taper: MK5 Operating data & connection values o Operating hours recorded: 2,737 Godpfx Aozgan Sjl Aeud Machine connection values o 3 x 400 VAC / 50 Hz / 58 kW / 97 A Dimensions / footprint o Required footprint (L x W x H): 2,810 x 3,300 x 1,900 mm Peripherals • Automated workpiece removal station, JOVI, Type 1113A, year of manufacture 2022, weight approx. 300 kg • Air filter unit, IFS, Type VARIO M 2000, serial no. 568113, year of manufacture 2022, weight approx. 120 kg, connection power 400/460 V, 50/60 Hz, 0.7 kW, 1.7/1.6 A • Water cooling unit, HASCH, Type MCW-50CT-17AUZ1-3407C, serial no. 1001220302582, year of manufacture 2022, weight approx. 150 kg, tank volume approx. 15 l • Coolant filter system, MICRONFILTER, Type EASY 250 / KMT350, serial no. 0201, year of manufacture 2022, tank volume approx. 2,300 l, connection power 400 V / 50 Hz, 5.34 kW • Immersion cooler, HASCH, Type MCS-120ST-05AOP6R7S6UZ1-3407C, serial no. 1003220400836, year of manufacture 2022, weight approx. 206 kg • Coolant tank, MICRONFILTER, Type VR200L / MIN-150L, serial no. 0201, year of manufacture 2022, tank volume approx. 150 l, connection power 400 V / 50 Hz, 1.1 kW • Separating magnet, MICRONFILTER, Type KMT350, serial no. 0212 • Loading unit, DANOBAT, Type rotary table lift, serial no. 3810490908, year of manufacture 2022, weight approx. 170 kg, max. load capacity approx. 230 kg • Rotary table trolley, year of manufacture 2022, serial number 110000503

Condition: new, Autobag bags are available for sale in the following sizes: Gsdeu Ni Rpspfx Al Aeud 150x250 1.5 million bags 200x320. 2.5 million bags Price Euro Palette 1 Pallet 0.02€ x Bag 2 Pallets 0.019€ x Bag 3 Pallets 0.018€ x Bag 4 Pallets 0.017€ x Bag 5 Pallets 0.016€ x Bag and so on 10 and more 0.01€ Bag 1 million Autobag bags from 0.01€ each

Condition: like new (used), Year of construction: 2023, This machine is tailor-made for businesses seeking a simple and reliable packaging solution. The maximum speed is up to 1,500 bags per hour. Operation is easy, requiring just two simple steps: filling the bag from the top and sealing the bag. For sale: Autobag bags in the following sizes: 150 × 250 – 1.5 million bags 200 × 320 – 2.5 million bags Price for full Euro pallet: 1 pallet: €0.025 per bag 2 pallets: €0.019 per bag 3 pallets: €0.018 per bag 4 pallets: €0.017 per bag 5 pallets: €0.016 per bag and so on 10 or more pallets: €0.01 per bag From 1 million Autobag bags: from €0.01 each Guodjr E Dpzjpfx Al Aed Currently reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Production orientation: Vertical Conveying system: Infeed and outfeed optional and dependent on product Film feed: Rear Forming shoulder: Fixed Operator display: Touchscreen with memory function Drives & controls: 3 servo motors and PLC control system Packaging length: 50–190 mm Packaging width: 50–150 mm (depending on film width) Packaging height: Dependent on forming shoulder Speed: 15–30 bags/min, depending on material, pack size, and product Film width: 110–320 mm Power consumption: Approx. 4.6 kW Machine material: “304 stainless steel with surface treatment” Printer bracket: Suitable TTO or ink wheel printer optionally available at extra charge Delivery time: Current lead time under 10 weeks Z-conveyor system: €8,500 Features: Stainless steel configuration, suitable for the food industry • Application for granules and small parts such as screws • Sectors: Pet food, food (coffee, nuts), metal industry • Simple touchscreen operation with color icons Guodpfx Aleq Ikhae Asd • Safety protection covers • Can be integrated upstream/downstream with other machines • Customer-specific modifications/designs on request • 12-head scale integrated, hopper 0.8L Additional options (on request and at extra cost): • Euro hole punch etc. Production orientation: vertical