Used Thrige Titan Mtl11-10A for sale (613)

Condition: used, Technical details: Length: 400 mm width: 200 mm height: 150 mm Tedpeu N Dr Iefx Aahsc weight of the machine approx.: 63 kg DIRECT CURRENT MAGNET Magnet core 8 pieces width x distance: 40 x 45mm *

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Todpfx Aasu Nzwushsc Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *

Condition: used, Year of construction: 1995, Technical details: Table dimensions: 920 x 620 mm voltage: 220 / 50 V / Hz total power requirement: 0,77 kW weight of the machine ca.: 0,11 t dimensions L x W x H: ca.0,92 x 0,62 x 0,80 m Strapping Machine Semi-automatic machine for plastic strapping (approx. Ø 500 x 17mm) Strap holder located in the base cabinet table surface folded with 1,5mm chrome plate with stop LxWxH 345 x 80 x 20mm, adjustment approx. 32mm The adjustment of the tightening is done by display on linear scale. The packaging machine is mobile and easy to move = 4 castors, swiveling and 2 castors are braked. Tedovc Axcspfx Aahjc *

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Tsdpfju Idmvsx Aahoc Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: new, power: 235.36 kW (320.00 HP), fuel type: diesel, axle configuration: 4x4, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, trailer coupling, From our range of new vehicles, we offer you: TLF 4000 all-wheel drive with 5,000 liters of water on an off-road MAN TGM 18.320 all-wheel drive chassis. Our "Water Buffalo" on a MAN chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 hp (235 kW) • Automated transmission • Off-road tires • Matching single tires for high off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 PA mountings in the crew compartment Superstructure: • High-quality superstructure in a frame construction made of rust- and corrosion-free material • Fold-out steps for each side equipment compartment • Individually customized equipment storage made of stainless steel according to your wishes • Walkable, non-slip vehicle roof Vehicle pump/fire extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP&ROLL capable • Performance 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, continuously adjustable foam mixing system • Water tank 5,000 l with integrated foam tank 500 l • Auxiliary heater in the pump compartment Firefighting equipment: • High-pressure quick-attack system with 50 m kink-resistant hose • Foam/water monitor 2,000 l/min on the vehicle roof • Self-protection system with 4 extinguishing nozzles in front of the tires Safety and lighting: • LED light bar on the vehicle roof/2 LED front warning lights • Pneumatic special signal system Martin horn • Public address system 100 W with intercom unit • Reversing camera • Comprehensive LED lighting in the crew and all equipment compartments • LED ambient lighting on the superstructure and additional spotlights • Pneumatic LED light mast with remote control • Hygiene board on request We would be happy to provide you with a specific offer and show you the vehicle in detail at our location in Berlin. Tedpfx Aozmyy Usahec All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, Year of construction: 2000, Schneidmaschine - Guillotine Schneider Senator SEN78 E-LINEYear 2000 - Serial-No. M-078E-004-10/30-09 Schnittbreite max. 780mm / Cutting width max. 780mm Programm - Duisplay / Program - Display Tjdpsh Ayarjfx Aahjc Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1999, machine/vehicle number: 24131, Schneidmaschine - Guillotine Schneider Senator Senator 115E Year 1999 Schnittbreite max. 1150mm / Cutting width max. 1150mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Tedjuu Rvpspfx Aahsc Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2026, machine/vehicle number: BN20XS "Standard", shaft length: 1,064 mm, workpiece weight (max.): 5 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 400 mm, total height: 500 mm, total length: 600 mm, working range: 70 mm, overall weight: 30 kg, warranty duration: 12 months, height adjustment type: electric, sheet thickness aluminum (max.): 3 mm, door opening width: 400 mm, door opening height: 350 mm, travel distance Z-axis: 100 mm, JEWELliner "XS2" model series "Standard" with 20W CW laser power. - Developed and produced in Germany - Other models, laser power and options on request. Tjdpeppxlmefx Aahsc Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L50xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - optional ring inside (f.e. name, date, symbol, handwrite) optional - optional ring outside (f.e. name, endless graphic, endless pattern) optional - optional bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.15mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS2" ( BN20XS2-HR ) : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 100x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - configured engraving software - rotation axis Specification: - laser technology: fiber laser - outputpower CW: 20W - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 70 x 70 mm – smaller possible - focus range: ca. 1.0 mm - min character high: 0.15 mm - min. line width: 0.020 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L500 x W400 x H500 mm - weight: 38kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: new, Year of construction: 2026, machine/vehicle number: BN120XT-HA-X, JEWELliner "CUT" 120W model series "PremiumPlus" Cutting & Marking in very short working time. - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Our engraving laser JEWELliner "CUT" is very usefull to cut precious metals and soft metals till max. thickness of 2.5mm. Thicker metals are possible, please contact us for more informations. More materials to cut or engrave like all metals, ceramic and some plastics, are possible. Applications can found in the jewellery ans also in other production areas. The machine dimension is very compact to integrade simple into a production area. Samples to cut: gold, silver, brass, carbon, aluminium Samples of material to mark: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.15mm character high) - round engraving (engraving on round or bowed surfaces) optional The main parts of JEWELliner "CUT" ( BN120XT-HA-X ) : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 280x200mm security glass - electrical automatic door opening - emergency button - 180° view area to the marking field - electrical z-axis for automatic focus positioning - configured engraving software Specification: - laser technology: fiber laser - outputpower CW: 120W - available frequency: 2.1 - 6300kHz MOPA - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – bigger or smaller possible - focus range: ca. 2 mm - min character high: 0.3 mm - min. line width: 0.023 mm - cooling: air cooled Tedsf Ul Uiopfx Aahoc - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L850 x W660 x H680 mm - weight: ca. 80kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: used, Guillotine Shears for Sheet Metal CNTA 3150/10A Technical specifications: Max sheet thickness: 10 mm Max sheet length: 3150 mm Year of manufacture: 1980 The machine is operational, in good condition, and ready for work. Tsdpoyaqklsfx Aahjc

Condition: used, mileage: 72,800 km, power: 75 kW (101.97 HP), first registration: 02/2022, fuel type: diesel, overall weight: 3,000 kg, axle configuration: 2 axles, fuel: diesel, energy efficiency: C, CO₂ emissions: 196 g/km, fuel consumption (urban): 7.9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.5 l/100km, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, total width: 2,040 mm, total height: 2,355 mm, Equipment: air conditioning, airbag, immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, UG1 Driver Assistance System: Hill Start Assist, 7L6 Start/Stop System Engine, 9WT Car-Net App-Connect, MP3A Multimedia Interface 2 x USB (Type C) front, 6XN Exterior mirrors, electrically adjustable and heated, KH6 Air conditioning Climatic (driver's cab), 07B Vehicle approval with a permissible total weight of 3.0 t, 1BA Suspension/damping standard, 1LA Disc brakes front 16" (diameter 303 mm), 1MM Steering wheel (3 spokes), 6DA Sun visors, two folding and laterally pivoting, 6X3 Grab handle on the partition in the cargo/passenger compartment, 8FA Without 2nd battery, 9Z0 Operating voltage 12 V, AL Palladium-Titan Black/Titan Black-Palladium/Pearl Grey, I8I Radio "Composition Colour" with 16.5 cm (6.5 inch) large touch display, M0H 4-cylinder turbo diesel engine 2.0 L/75 kW TDI Common Rail, base engine: T29/TQ4/T0P/T6M, T3C 4-cylinder diesel engine 2.0 L assembly 04L.Y, VI4 Service indicator 50,000 km or 2 years (variable), 5EV Approval as a truck with an N1 approval (up to and including 3.5 t permissible total weight), K4A Panel van, B4B4 Candy White, 8N4 Windshield wiper intermittent control, R22 Prepared for "We Connect" and "We Connect Plus", 8RE 4 loudspeakers: 2 tweeters, 2 woofers, U9B 2 USB interfaces (Type C) in the dashboard, 9ZX Mobile phone interface, 4Z3 Glove compartment with lockable flap, illuminated, Q68 Tires 205/75 R 16 C 113/111, rolling resistance optimized, 8GV Alternator 180 A, 18211 Turn signals LED integrated into exterior mirrors, 8ID Twin headlights, 38400 Dual-tone horn, 7C3 Entry handle on rear pillar, rear right, 1AS Electronic Stability Program (ESP), FH2 Power windows front, G0K Transmission. We are available by phone Monday - Friday until 8:00 PM and Saturday until 4:00 PM! Further information:!! Tsdpfx Aajz Hmv Tohoc Leasing/financing and trade-in possible!! !! !! - Errors and prior sales excepted!! - All information without guarantee ... more on our website.

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International size designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free shot weight: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English Tedjy D Adtspfx Aahjc +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: used, mileage: 3,90,800 km, power: 290 kW (394.29 HP), first registration: 12/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro6, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, * Special equipment: Rohr refrigerated body for fresh goods * Carrier Easy Cold Supra 850 refrigeration unit with temperature recorder, 2454 operating hours * Power supply connection for electric cooling * Tail lift by BÄR, 2.5 t, 2450 mm aluminum platform * Turn-assist camera * Reversing camera * Automatic wheel chains on rear axle for traction assistance * Fully air-sprung chassis * Low coupling system * Front axle: 8.0 t * Audio system: CD radio * Exhaust outlet to lower right * Brake connections: Standard and DuoMatic * Compressed air connection in cab * Aluminum air tank * Reinforced engine brake * Steerable and liftable trailing axle * Interface for fleet management system Tedpfx Aajy Ei D Ashsc * Cab seats: Driver's comfort air suspension seat * External sun visor * Sun protection roller blind, side window, driver’s door * 12V socket in front passenger footwell * Additional 24V socket in front passenger footwell * Preparation for 2nd control unit for level control Further equipment: * Emission standard: Euro 6C * Axle configuration: 6x2/4 * Actros 4 * Trailer brake: 2-line system, left side connections * Trailer socket: 24V / 15-pole * Exterior mirrors: electrically adjustable and heated * Rear axle differential lock * Driver assistance features: Attention Assist (fatigue detection sensor) * Driver assistance features: Active Brake Assist * Driver assistance features: Lane Departure Warning * Cab: Width 2.30 m, Cab: L type * Cab: steel-sprung, comfort * Cab floor with engine tunnel 320 mm * Suspension: air / air (full air suspension) * Power windows * Tinted windscreen * Transmission: 12-speed, type G 211-12, PowerShift * (AdBlue): 60 L * Manual tilting steel roof * Lower comfort bed, comfort locking system * Communications interface * Fuel tank: 630 L aluminum * 2-stage air compressor * Engine: 10.7 L, 290 kW, inline 6-cylinder diesel (OM 470) * Engine compartment encapsulation * Residual heat utilization * Disc brakes on front and rear axles * Voltage converter 24V/12V 10A * Front axle stabilizer * Additional stabilizer on rear/trailing axle * External left storage flap * Cab socket 24V * Tachograph / EU control device * Preparation for CB radio * Preparation for toll collection * Auxiliary water heater * In addition to the truck, we sell the Rohr trailer, 1st registration 12/2018, type RZAK/18 for €10,000 net plus VAT * Dimensions: 7360 x 2450 x 2450 mm * Drive-through capability (pneumatic opening/closing) * Tail lift by BÄR, 2.5t, 2350 mm aluminum platform * Carrier Supra 850U refrigeration unit * Temperature recorder * Night power socket * Disc brakes * Extendable drawbar * Payload: 10,980 kg * Unladen weight: 7,020 kg * Gross vehicle weight: 18,000 kg * Subject to errors, modifications, and prior sale

Condition: used, mileage: 5,89,000 km, power: 294 kW (399.73 HP), first registration: 01/2011, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, color: blue, gearing type: mechanical, loading space length: 4,900 mm, loading space width: 2,460 mm, loading space height: 600 mm, Year of construction: 2011, Equipment: ABS, air conditioning, SCANIA P 400 / 4x2 Tipper 4,90 m + CRANE + REMOTE CONTRROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2011 ? MILAGE: 589 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ?AIRCONDITION TIPPER: 490 x 246 x 60 cm (L x W x H) CAPACITY: 8 000 kg TOTAL WEIGHT: 19 000kg TIRE SIZE: 13R22,5 WHEELBASE: 390 cm SUSPENSION: SPRING CRANE: FASSI F110A.23 + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO Tedpfx Aszah Eyoahjc * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 51796

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640 Nexus, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 410 mm Travel Z-axis: 510 mm Table dimensions: 900 mm x 410 mm Spindle speed: 12,000 rpm Tool holder: SK40 Number of stations in tool changer: 30 Internal coolant supply: 15 bar MACHINE DETAILS Tedpfjymzmkex Aahjc Control: Mazatrol 640 Nexus Machine weight: 5,010 kg EQUIPMENT Chip conveyor

Condition: ready for operation (used), Indramat MAC090A-0-ZD-1-B/110-A-1/DI1250 three-phase servomotor SN: 50388R1, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as shown in the photos. Tedpfx Aaoy Npfbjhsc

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 2000x1000 mm- Motor rating 2.2 kW, 4.6 A, 3 Ph, 400V/50 Hz, 1430 rpm- Flow rate 6800 m³/h- Usable negative pressure 500 Pa- Filter surface 2.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 3400 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 2-stage switch, +5 m connection cable with power safety plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1912x1405x946 (2969x1405x1218)- Weight device approx. 248 kgItem No. 195 752 01 Tsdpfxov Svc He Aahec

Year of construction: 2021, operating hours: 480 h, condition: like new (used), functionality: fully functional, Electrostatic separator (corona) - EBS-4-271200 - builded to extract the metals from the rejection of the plastic from electric cable process Including additional options: - 3 screw transporters; - 3 m3 input hopper; - mechanisms for changing material flow and stand for big bag for mix collection; - touch screen for control cabinet english / rusian language; - set of spare parts Designed for dry high-efficiency separation of materials, that are differ in their electric properties: - mixtures of plastics and metals, including shredded cables, into metal (copper, aluminium), and non-conducting material (plastic); - mixture of different materials, provided that one of the components has conducting properties (extraction oftextilecord from rubber crumb in the processing of used tires ); - shredded WEEE (including PCB’s) into metal (aluminium, copper, nickel, bronze, and other) and nonconducting materials (plastic, textolite, fiber-glass plastic, and other), and also for: - separations of non-metal raw material (feldspar, pegmatite, quartz sand); - enrichingofdroughconcentratesofores of rare metals (titan-zirconia, tantalum- niobic, tin-tungsten, monazite), ores of precious metals (gold, silver); - benefication of diamond ore. The equipment was purchased at the end of 2021 directly from the prestigious manufacturer PRODECOLOGIA, which also installed it in our factory. Tjdpfx Aaswcp I Aehec The equipment works perfectly and can be tested at any time with PVC plastic, from our Guidetti plant for electric cable recycling. Upon request, we can also provide installation + commissioning at the buyer's location. PRICE : 108 000 EURO- netto

Condition: good (used), power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply -Manufacturer: Siemens, power supply DC power supply SIMATIC S7-400, power supply PS407. 10A -Type: 6ES7 407-OKROO-OAAO -Power: 10 A Todpewc Nmfsfx Aahoc -Dimensions: 215/50/H290 mm -Weight: 1.4 kg

Condition: ready for operation (used), Fagor V10 axis control, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Tedpfxoi D Uuto Aahec

Condition: ready for operation (used), Rexroth MAC090C-0-KD-2-C/110-A-0 3-phase permanent magnet motor MNR: R911223273 SN:MAC090-93905, used, normal signs of use, 100% functional, scope of delivery as per photos Tedetz Idkjpfx Aahec

Condition: ready for operation (used), Siemens 6GK1141-0AA00 communication processor, E-Stand 7, used, normal signs of wear, 100% functional Todpfx Aasxagtzohjc

Condition: new, Siemens 6SC6190-0FB01 Simodrive 610 AC-VSA FBG power module 90/180 A, 1/3 axis, serial number as per photo, unused in original packaging, 100% functional, scope of delivery as per photos. Tjdpfjxag Dtjx Aahoc

Condition: new, Siemens 6SC6501-0AB02 AC feed drive FBG power module, unused, in opened original packaging, 100% functional Tjdpfexag H Uex Aahsc

Condition: new, Siemens 6SL3040-1MA01-0AA0 Control Unit CU320-2 PN Version: E SN:T-H86207563, unused in opened original packaging, 100% functional, scope of delivery as per photos Tjdpfsxag S Rjx Aahjc