Used Tracto-Technik Tubobend for sale (9,322)

Condition: ready for operation (used), * Brand: Dosiertechnik * Model: vibrating chute Bodpsywmm Esfx Af Aeln * On stock: 2 pieces * 1x: Dim. vibrating chute: length 4300 mm - width 400 mm. * Driving: 2 pieces vibration motors of each 1,7 kW. * 1x: Dim. vibrating chute: length 5000 mm - width 400 mm. * Driving: 2 pieces vibration motors of each 1,6 kW.

Condition: ready for operation (used), * Brand: dbr Fördertechnik * Type: Ellipse horizontal * Surface: 6000 x 1800 mm – 2 decks * Driving: 18,5 kW E-motor. Bljdpfx Aoywmw Dsf Aen

Condition: used, Year of construction: 2021, operating hours: 4,856 h, functionality: fully functional, Equipment: Basic package Inventhor 6: - Load-Sensing System - Fuel tank (500 liters) - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally positioned lubrication strips - 24 V electro-control with additional electric pump for operation of the following functions when engine is off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GFRP (fiberglass reinforced plastic) service doors - Service-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Service ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Bsdpfeywyuijx Af Ajln Additional equipment: Drive System * CAT diesel engine C9.3B, 310 kW at 1,800 rpm, complies with EUROMOT V emission standard * Roller drive via planetary gearbox 310 kW (VARIO) 400 mm Track Chassis Unit - Track chassis with 2 travel speeds - Track width: 400 mm, triple bar - Drive via chassis gearbox with variable motor - Total weight approx. 24,000 kg Shredding system Size "L" complete (Variomat System L 600/4 - 30 teeth) Additional comb bar Size "L" complete, with 14 comb teeth Size "L" limiter (7 pieces), incl. mounting bar and fastening material Additional hydraulic connection 35 l/min to 80 l/min 400 mm flat track chassis Right-hand side door protector panel complete Left-hand side door protector panel complete Three-sided hopper extension H=350 mm Rear conveyor 4.9 m, 1,000 mm wide, hydraulically foldable, with anti-magnetic center section Overbelt magnet - Neodymium Frame for overbelt magnet Delivery date upon agreement

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 3,000 rpm, saw blade diameter: 200 mm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D MACHINE DETAILS Motor power: 16 kW Operating hours: 297 h Cutoff Saw TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Haul-off Unit TECHNICAL DETAILS Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Max. belt width: 160 mm Max. profile height: 160 mm Bsdpfx Afoyrmzqe Aoln MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter 10-step helical potentiometer

Condition: excellent (used), Year of construction: 2008, 1 x Oil Mist Extractor Keller Lufttechnik OENA-0.5-K-H11 Year of manufacture: 2008 In very good condition. Bodpfx Afjxvrw De Ajln The extraction unit can be inspected at our warehouse.

Condition: good (used), Column jib crane, overhead crane, workstation crane -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2690 mm -Swivel range: 270° -Chain hoist: Demag type DCM-PRO 2 250 H2.8 V -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min Blodpfx Afjxwt Nwo Asn -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 540 kg

Condition: used, Year of construction: 2013, functionality: fully functional, conveyor belt length: 2,560 mm, conveyor belt width: 680 mm, total length: 2,560 mm, power: 37 kW (50.31 HP), motor manufacturer: SEW Eurodrive, Belt Conveyor / Conveyor Belt / Belt Band Color: Light Grey Year of Manufacture: 2013 Bodpfx Ajyxf Nhjf Ajln Manufacturer: AMI Fördertechnik Condition: Used Model: Belt/ KGF 65 Total Length: approx. 2560 mm Overall Width incl. motor: approx. 680 mm Overall Width without motor: approx. 620 mm Belt Width: approx. 590 mm Belt Type: Longitudinal Grooves Frame Material: Aluminium Frame Height: approx. 70 mm Including SEW Motor (0.37 kW) In Stock: 6 units Price per unit Collection Address: Industriestraße 5 (47918 Tönisvorst) Internal Article Number: 2026032602 The conveyor system was in operation until it was dismantled. Thanks to the excellent workmanship of this conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for the loading and unloading of your goods, we are your competent partner! We are happy to provide you with a bespoke quotation or advise you on design or installation matters. Just let us know your requirements and local conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable way. We can also offer fully automated sorting systems or supplementary components such as order picking racks or containers.

Condition: used, functionality: fully functional, overall weight: 210 kg, Year of construction: 2006, machine/vehicle number: 31006, Construction machinery technology: mounting plate for hydraulic breaker Bodpfoyxgfdex Af Aeln

Condition: used, Year of construction: 2001, Overview This Krones rinser-filler-capper block was manufactured in 2001 and consists of a Volumetic filling system combined with a Variojet rinser and a screw-capping machine. The machine is designed for PET multiway bottles (GDB PET-MW) in 1.0 L and 0.5 L formats. The system is equipped with 120 filling valves and 88 rinsing stations. The rinser operates with 2 rinsing channels, currently configured for ClO₂ and fresh water. The machine runs clockwise and achieves a production capacity of up to 32,000 bottles per hour at 1.0 L. The machine will be available from October 2026 and will be exchanged parallel to the installation of the new line.  Technical Data Bledpeyluwtjfx Af Asn - manufacturer: Krones - model: Volumetic (filler) / Variojet (rinser) - year of manufacture: 2001 - filling valves: 120 - rinsing stations: 88 - rinsing channels: 2 (currently ClO₂ and fresh water) - formats: - 1.0 L GDB PET-MW - 0.5 L GDB PET-MW - POC 1810 closures - production capacity: 32,000 bph at 1.0 L - direction of rotation: clockwise - availability: beginning of October 2026

Condition: used, Year of construction: 2002, Features: Condition: fully functional, with signs of wear Ideal for rapid material transport Professionally dismantled and packaged Manufacturer: Transtechnik GmbH Year of manufacture: 03/02 Condition: Used Model type: 110/650 Overall length: approx. 1120 mm Overall width including motor: approx. 830 mm Overall width without motor: approx. 730 mm Belt width: approx. 650 mm Belt type: Smooth Color: Stainless steel gray/black Material: Stainless steel Drive type: Drum motor Belt conveyor Thanks to the excellent workmanship of the belt conveyor, your material glides gently to its destination, even under high load. Custom-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the trades, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or additional components such as picking racks or containers. Blsdpfx Afektf Ncj Asn

Condition: used, Used automatic shot blasting machine from KF Strahltechnik for sale. The machine is designed for the automatic shot blasting of profiles, sheet metal, and steel structures. The four blast wheels/turbines make the machine suitable for efficient processing of the top and bottom surfaces of workpieces. The machine is in good condition and is currently in operation. An inspection and test run at our facility are possible by arrangement. Technical data: Manufacturer: KF Strahltechnik Machine type: Automatic shot blasting machine Number of turbines: 4 Maximum workpiece width: 800 mm Maximum workpiece height: 400 mm Suitable for: Profiles, sheet metal parts, steel structures, and similar workpieces Processing: Shot blasting of the top and bottom surfaces Roller conveyor at the front: approx. 6 m Bljdpfx Ajkw Ukuef Ajn Roller conveyor at the rear: approx. 6 m Condition: Good, currently in operation Inspection: Possible at the facility Test run: Possible by arrangement Delivery and sales conditions The stated price is the ex-works price for direct collection. Dismantling, loading, transport, and installation/commissioning at the new location are not included in the price and can be offered separately if required. The machine is sold used and in its current condition. An inspection and examination before purchase is expressly possible. ✅ Automatic shot blasting machine from KF Strahltechnik ✅ 4 turbines/blast wheels ✅ For profiles and sheet metal parts up to 800 x 400 mm ✅ Roller conveyors at the front and rear, each approx. 6 m ✅ Currently in operation and in good condition ✅ Inspection and test run possible at the facility ✅ Price ex-works, dismantling and installation optionally available at an extra charge

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climatic test chamber -70 to +180 °C Manufacturer: Weiss Umwelttechnik GmbH Type: Climatic chamber WK-1000/70 Test chamber volume: 990 liters Temp. range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Nominal output: 13.8 kW Refrigerant: R 404A Blsdoph U Ayepfx Af Aen Control system SIMCON/32 microprocessor-controlled control and monitoring system - 32 bit technology - Graphic display of setpoint and actual value - Digital setpoint and actual value display of temperature and % relative humidity - digital input for temperature in °C and humidity in % rel. humidity - Integrated programmer - program memory - Manual and automatic operation - Fault diagnosis system Operating hours: 34303.8 h Year of construction: 2004 Test area dimensions: Height: 950 mm Width: 1100 mm Depth: 950 mm External dimensions: Width: 1400 mm Depth: 1900 mm Height: 1970 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 2016, Features: Condition: Fully functional, with signs of use Ideal for rapid material transport Professionally dismantled and packaged 90° roller conveyor curve Model: Round belt year: 2016 Manufacturer: AMI Fördertechnik Condition: Used Overall width (outside): approx. 2100 mm Overall width (inside): approx. 1130 mm Conveying width incl. motor: approx. 700 mm Conveying width without motor: approx. 600 mm Roller pitch/axle distance: approx. 80/130 mm Frame made of steel Frame height: approx. 125 mm Frame width: approx. 35 mm Color: Light grey Includes SEW motor (0.37 kW) Includes side guides Feet to be ordered separately Stock: 2 units Price per unit Blodpfepl Uypsx Af Asn The conveyor system was in operation until it was dismantled. Thanks to the excellent workmanship, your materials will glide smoothly to their destination, even under heavy loads. Tailored solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic systems for loading and unloading your goods, we are your competent partner! We are happy to provide you with a customised offer or advise you on system design or installation questions. Just let us know your requirements and site conditions. Benefit from our many years of experience and our outstanding network of specialists. We have already successfully completed projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, skilled trades, or the electronics sector. Together we will find ways to optimise your process and material flow in a cost-effective and sustainable way. We can also offer fully automated sorting technology or additional components such as order picking racks or bins.

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Bledpsnt Uc Refx Af Aen Output : 125 mm (d) Input: 125 mm (d) We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Condition: good (used), 7x pallet transport racks, Lützenkirchen – used - : Price per unit: €395 (net), dismantled, packaged, and loaded! Manufacturer: Lützenkirchen Lagertechnik GmbH Type: / Year of manufacture: not specified Load capacity: not specified Quantity: 7 Bjdpfx Asw Acruef Aoln Dimensions: L76cm x W60cm (54cm effective) x H30cm Condition: good Available: immediately Location: 04720 Döbeln

Condition: used, Year of construction: 2003, Labelling machine Krones Prontomatic Type 12-6/6-4, year of manufacture 1994 - reconditioned. Capacity: 13500 bph Swing-top label Voltage: 400 V Blodpexbpggofx Af Aen Frequency: 50 Hz Length: 2450 mm Width: 2000 mm Height: 2500 mm Formats: Crown cap returnables: 0,33l, 0,5l NRW; crown cap one-way: 0,33l; swing-top: 0,5l, 0,58l Machine partitioning: 180mm Running direction: Right - left Operation / Control: Simatic S7-300

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: Blodpsw E H E Refx Af Asn - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: used, Year of construction: 1975, workpiece diameter 125 mm grinding depth 50 mm Bsdovanrcopfx Af Asln clamping length 2000 mm total power requirement 0,5 kW weight of the machine ca. 1000 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _____ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm ght of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head adjustable in vertical axis 160 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Total electrical load, approx. 1 kW - 380 V - 50 Hz Weight, approx. 1.000 kg Accessories / Special Features Machine is suitable for workpiece length up to 2.000 mm with a basement extension * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. The workpiece remains stationary, enabling the generation of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw vice which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering vice with carbide inserts. Manual adjustment of appropriate workpiece diameter with clamping screw. * Dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form and with oscillation of diamond tool. * Pre-centering device for Workpiece adjustment between centers. * Pneumatic Oil Lubrification of grinding spindle by oil-mist. * Manually adjustable Tailstock with handwheel but without motorized drive. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: good (used), functionality: fully functional, Manufacturer: MK Messtechnik: EMC Test-and Measuring Systems Bledswpgkzjpfx Af Asn Examples of use: Transmission of engine or radio noises during immunity tests (vehicle tests). + Monitoring displays + Monitoring audio signals The AV system (Analog optical transmission line for audio and video signals) consists of: - AV-Rmr² multi-channel receiver (for 8 channels, incl. power supply) - User manual - 8-channel charger (1 channel defective) - AV-µC camera - 6x Battery-Pack BP-84 - 3x AV-Cr camera system - 3x PT-02 pan/tilt head - AV-C video camera - AV-T transmitter - 2x dAV-Cr-SD - Display ED-35 - Various cables, unclear if all are complete

Condition: used, MUNK Günzburger Steigtechnik 303406 Aluminum access ladder machine crossing with platform (bridge) 1900-750-2500 RA2414 Technical data: Manufacturer: Munk Günzburger Steigtechnik Type: machine crossing with pedestal Condition: very good (used) Total size: 1900-750-2500 mm (WxDxH incl. handrail) step dimensions: 85 x 600 x 45 mm step/tread height: 230 mm platform dimensions: 800 x 650 mm Platform height: 1350 mm bottom edge 1420 top edge Steps: 6 (5 steps + platform on each side) Maximum working height: 3450 mm maximum load: 150 kg Weight: 38 kg Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Bodpfxewpymie Af Aoln For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil Bjdpowh Rp Eefx Af Asln - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: used, Pallet roller conveyor Accumulating 7500-1000-840 RA2349 Conveyor length (FL): 7500 mm Roller width (RB): 840 mm Outer width/nominal width (NB): 1000 mm Roller spacing / pitch 175 mm Frame height: 160 mm Current storage space size approx. 900 mm 8 storage spaces Storage mechanism can be converted for other storage space sizes, e.g. 1200 mm for Euro pallets Length can be extended/reduced. Several units available single roller drive chain, so that several elements can be driven with one motor. for pallet weights up to 1000 kg Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Bsdpfx Ajvr Ncyef Aoln Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, Year of construction: 2026, WOOD SHAVINGS MACHINE KÄLIN Hobeltechnik, mod. MPC-P • Quantity of fresh shavings by hour: 3.800 Kg/hour • Measures logs box: 2.800mm x 1100mm x 1.300mm • Max. log input length: 2.650mm • 2 removables symmetrical cutterheads. Lenght 1.140mm. Each one in 3 pieces of: - Diameter: 200mm - Length: 380mm - Number of knifes: 8 - Sharpening full cutterheads, without removing knifes!! • 2 extra removables symmetrical cutterheads, for replacement during sharpening. Super fast cutterheads change patented system!! Blodpfxevk Saxj Af Aon • Power of the cutting heads: 90 kW/120 HP • Feeding speed controlled by ELECTRONICAL INVERTER: 6 to 36 m/min • Automatic control of the forward-charge ratio of the machine • Power of the feed motor: 15 kW/20 HP • Control System of the material level inside the logs box, to avoid working without logs • Cabinet and control panel. Touch screem to control the machine • Motorized conveyor belt for the wood shavings. 800mm x 5.000mm • Weight: 11.000 Kg • CE

Condition: good (used), Circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine, test screening machine Bljdpfx Ajvmnhwsf Aen -Manufacturer: Siebtechnik, test sieving machine LAVIB -Type: LAVIB 86 -Dimensions: 490/470/H600 mm -Weight: 66 kg

Condition: excellent (used), total width: 500 mm, total height: 280 mm, conveying length: 3,000 mm, working height: 280 mm, load capacity: 1,000 kg, Price for: 1 unit of roller conveyors (total length 3m) = 75 EUR plus VAT For larger quantities, price on request. Roller conveyors for the furniture industry, WTT Fördertechnik, Type 121 Total of 750 units of complete roller conveyors, each 3m long (total of 2250 running meters) Detailed description: Roller conveyor length L = 3000 mm Installation length IL = 500 mm Bjdpfswwmkdsx Af Aeln Load roller spacing T = 200 mm Roller conveyor height H = 280 mm +/- 25 mm adjustable Number of feet FA = 1 unit per running meter Load capacity approx. 1000 kg 1 unit consists of: 1. 2 units of side rails, each 3000 mm long, made of profile 20/80/40/3 mm, with a pitch of 25 mm, perforations suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. 2. Insertable load rollers, 15 units Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness Axle - 12 mm spring axle Bearing – steel insert with reinforced, pressed special ball bearings. Surface of the load rollers is steel, uncoated. Installation length IL = 500 mm 3. 3 units of screw-on bridge support feet in a stable, welded construction made of special profile with a cross brace, adjustable in height by +/- 25 mm via a threaded spindle M16 with a screw slot. With floor mounting plates and dowel holes. Powder-coated in RAL 3000 red. Weight – 2.5 kg (Subject to changes and errors in the technical data, as well as prior sale)