Used Weingarten/Schuler Line Of Presses for sale (23,405)

Condition: used, Year of construction: 2000, pressure 16 t throat 350 mm stroke 25 mm no. of strokes 200 - 1000 /min Iedpfx Aew U Ekvjmyjat distance table/ram, max. stroke up, adjustment up 230 mm table surface area 480 x 280 mm Table height above floor 1050 mm ram surface 200 x 110 mm ram adjustment 25 mm diameter of blanks - 1800 mm no. of flutes 16 - 460 material thickness 2,0 mm distance between mid parts spindle and mid ram 160 - 680 mm power requirement 6,0 kW Weight 5,60 t dimensions of the machine (WxDxH) 1,4 x 2,9 x 2,4 m year of manufacture 1971 - new control 2000 with infinitely variable AC-drive, pneumatic clutch (Ortlinghaus), manual ram adjustment, electro-pneumatic blank clamping, automatic stripping device, intermittent control (ram lifting for idle stroke), fully automated centralized oil lubrication, two-hand operation, electrical control Siemens S 7 (yom 2000) various change wheels

Condition: new, empty load weight: 5,787 kg, maximum load weight: 14,213 kg, overall weight: 20,000 kg, axle configuration: 1 axle, suspension: air, tire size: 235/72R17,5, Equipment: ABS, truck registration, | Krone City Liner Profi/1-axle curtainsider semi-trailer with forced steering | toolbox | spare wheel holder, Edscha roof | SAF axles with disc brakes | tare weight: 5,787 kg, payload: 14,213 kg | tires: 275/70R22.5 | tail lift 2000kg | length of loading area: 11.25m | errors excepted, subject to input and prior sale. Iajdewrriuopfx Amyet

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel Iajdpsu Rwa Isfx Amyet - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2012, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 55 / R22.5, wheelbase: 9,500 mm, color: white, Year of construction: 2012, Equipment: tail-lift, Axle configuration Tyre size: 385 / 55 / R22.5 Make axles: BPW EcoPlus Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 3: Max. axle load: 9000 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40% Ijdpoyya Twofx Amyeat Weights Empty weight: 8.060 kg Carrying capacity: 30.940 kg GVW: 39.000 kg Functional Tail lift: Zepro ZHD 2500-150 MA, tail lift, 2500 kg Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), Year of construction: 2000, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 1,000 mm, table length: 5,000 mm, table width: 2,000 mm, CNC Gantry Milling Machine Forest Line Seramill 240T – Robust & Precise For sale: Forest Line Seramill 240T CNC gantry milling machine, year 2000 – used, in excellent condition. Perfect for machining large workpieces with high precision. Key Features: Iodpfx Amsyfpkbeyjat Robust gantry design for maximum stability Accurate Siemens 840D control Large working area: 5,000 × 2,000 mm Travel: X 5,500 mm | Y 2,900 mm | Z 1,000 mm | A ±135° | C ±180° ISO 50 spindle, max. 6,000 rpm Ideal for series production and individual parts Perfect for carpenters, furniture manufacturers, and production workshops that want to machine large parts precisely. Available immediately! Contact us for details, photos, or a viewing.

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 65056, functionality: fully functional, pressing force: 5,000 t, stroke length: 900 mm, table width: 4,520 mm, table length: 2,150 mm, overall weight: 3,19,000 kg, Equipment: safety light barrier, Pressure build-up time: 3.6 s Pressure relief time: 1.5 s 6-axis industrial robot, manuf. ABB, type IRB6640 M2004 Control cabinet array, 12-door, SN 6/5056 Operator panel, water-based hydraulic unit Iedjxb Tplepfx Amyeat Tool change device Mesh safety enclosure with light curtains

Condition: new, maximum load weight: 29,400 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,480 mm, total height: 2,000 mm, Year of construction: 2026, Equipment: ABS, Brand new Krone Profil Liner SDP 27 3-axle platform trailer * Krone axles * A-axle as lift axle * mechanical support winches (12t) * Tires: 385/65 R22.5 * 1x plastic tool box * Pallet box for 24 Euro pallets * Fifth wheel height: 1,150 mm * Spare wheel holder * Reinforced front wall * MULTILOCK outer frame Iajdpfx Amjvw Hlcjyot * 6 pairs of heavy-duty lashing eyes * Stake pockets on the side and in the middle * Six extendable stake pockets on each side * Six cable winches on each side for load securing * 18 insert stakes * 4 illuminated over-width signs * ORANGE rotating beacon Example photos We are happy to provide you with further information.

Condition: used, empty load weight: 6,740 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R 22.5, color: blue, gearing type: mechanical, Equipment: ABS, Wooden floor, container doors, toolbox, disc brake, lift axle, sliding tarpaulin, sliding roof, pallet box, EBS, multilock outer frame, 4 pairs of ship securing lugs, KRONE axles, 2 x spare wheel holders, certificate for load securing according to EN 12642 Code XL Iaedpfxexpvdho Amyet

Condition: excellent (used), Sound insulating cabins. For Bruderer high speed automatic presses. On stock available cabins for machines: BSTA 25 BSTA 41 BSTA 50 BSTA 60 BSTA 80 Cabins sold refurbished, carefully disassembled and packed for transport. Painted in white and anthracite (or colors requested by customer). Cabin is equipped with all needed holes for easy use of a Bruderer press. Front and rear doors with inspection glass. Air ventilator for climate control on top cover. Isdpfx Amjiw Icboyoat For more information don't hesitate to contact us. We have on stock Bruderer BSTA 25, BSTA 30, BSTA 50, BSTA 110, also Mabu and Schaal automatic punching machines.

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Iaodpjvgbgajfx Amyst Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable Iaodpfx Ameu Ic Avjyot 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS. Iedpottlfkefx Amyoat

Condition: excellent (used), ELOPAK SHIKOKU ASEPTIC FILLING LINE Model S-PS80HA YOM 2008 Working hours - 9,000 hours. Line capacity for 3 streams - 8100 pcs./h, for two 7100 pcs./h for one 6000 pcs./h Iedsxdbwiepfx Amysat Carton format: 500ml, 750ml, 1000ml The line includes: - Elopak filler S-PS80HA for Pure Pak classic packaging material - 3 units of PURE-PACK PLA-S30 cap applicators for Pure-Twist 2U cap - WA-Flex-30 packer - Conveyor system. - Conveyor lubrication station. - Spare parts a total of 4,000 dollars.

Year of construction: 1985, condition: ready for operation (used), Press force: 100t, stroke rate: 60/min, ram stroke: 8mm-137mm, ram adjustment: 80mm, throat depth: 375mm, table dimensions X/Y/Z: 800mm/630mm, machine dimensions X/Y/Z: approx. 1500mm/2400mm/3500mm, weight: approx. 8800kg. An on-site inspection is possible. Iedpfxeyu T Dqj Amyoat

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 2259, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,900 mm, rotational speed (max.): 24,000 rpm, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 6,000 mm Travel Y-axis: 3,500 mm Travel Z-axis: 1,900 mm B-axis: +/- 110° C-axis: 360° Spindle speed: 24,000 rpm Spindle taper: HSK 63 Spindle motor: 25 kW Table size: 6,000 mm x 2,500 mm (hole pattern 22H7 / M16) Iaodjyv A Dkopfx Amyot Feedrate X + Y: 30,000 mm/min Feedrate Z: 28,000 mm/min Rapid traverse: 30,000 mm/min MACHINE DETAILS Control: Siemens 840D Tool changer: 40 tools EQUIPMENT Spindle: Fischer (type MFWS 1709/30, 2 units) Milling head: Forest Line (type: fork head, B-axis swivels +/- 110°, C-axis rotates 360°) Richter chip conveyor (scraper conveyor) Blum tool measurement Parking station for milling head (2 units)

Condition: excellent (used), Year of construction: 2005, Edgebanding Machine Manufacturer: Brandt Model: KDF 540 Profiline Year of manufacture: 2005 Operating hours: approx. 7,718 h Edge thickness: 0.3-3 mm (roll), 8 mm (magazine) Workpiece thickness: 8 - 50 mm Total length: 5,360 mm Iaedpfsyvr H Iox Amyjt Connected load: 7 kW Feed speed: 11 m/min Height adjustment: Electric Joint adjustment: Electric Equipment: Jointing unit: Yes End trimming unit: Yes Radius flush milling unit: Yes Corner copying unit: Yes Radius scraper: Yes Surface scraper: Yes Buffing unit: Yes Spraying device: Yes

Condition: used, total height: 5,100 mm, total width: 2,600 mm, pressing force: 65 t, For sale: Schuler toggle drawing press PK No. 630 Isdswab T Ejpfx Amyeat

Year of construction: 2026, condition: new, functionality: fully functional, We hereby submit our offer for the supply of a large open-type industrial cabin designed for efficient air handling and ventilation applications. The offered machine is engineered for reliable operation and consistent performance in industrial environments. The cabin has overall dimensions of 2000 mm in length, 2050 mm in width, and 2850 mm in height. It is equipped with an electric motor rated at 3 kW, operating at a nominal speed of 2800 rpm. The motor is directly coupled to a dynamically balanced centrifugal impeller with a diameter of Ø452 mm, ensuring smooth operation, low vibration, and high mechanical efficiency. The system is designed to deliver an airflow capacity of 4000 m³/h, providing effective air extraction and circulation for various industrial processes. The open-type cabin design allows unobstructed access, ease of maintenance, and optimized airflow distribution, making it suitable for ventilation, fume extraction, and general industrial air handling applications. Ijdpfxoygh Alj Amyoat All mechanical and structural components are manufactured in accordance with standard industrial engineering practices to ensure durability, operational reliability, and long service life. The unit is designed for continuous-duty operation and complies with typical industrial safety and performance requirements. This offer includes the complete machine as described above, fully assembled and ready for installation.

Year of construction: 2026, condition: new, An open-type industrial booth engineered for efficient air extraction and ventilation in professional and industrial environments. The unit features overall dimensions of 1269 × 1367 × 2379 mm and is equipped with an electric motor rated at 1.1 kW operating at 2800 rpm. Air movement is provided by a Ø315 mm impeller, delivering an airflow capacity of 2600 m³/h. The booth is designed for reliable continuous operation, ensuring stable airflow performance and effective extraction, making it suitable for industrial applications that require controlled ventilation and air handling. Iasdpfx Aoyghnnsmyjt

Condition: used, Year of construction: 1971, pressure 100 t passage width . mm stroke . mm tracking travel 45 mm safety distance 208 mm Follow-up time 149 sec The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Iasdoyuttrepfx Amyjt apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter) Iajdpfx Amog Atrvjyot

Condition: used, Year of construction: 1974, functionality: fully functional, pressing force: 63 t, stroke length: 100 mm, ram adjustment: 63 mm, We offer this used Weingarten A 63 eccentric press, year of manufacture 1974, including punching tool. Pressing force: 63 t Iaedpfx Asyryt Tomyjt Strokes per minute: 120 Ram stroke: 8–100 mm Ram adjustment: 63 mm If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) Iaodpovut Dyefx Amyot yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: good (used), Year of construction: 2000, CNC surface and profile grinding machine Fabr.Ziersch & Baltrusch Type:PROFITLINE ZB 62 NC Iasdpfxsfrbcks Amyet Year of manufacture.2000 grinding range : 600X270mm Electromagnet with continuous transverse pole pitch 600X200mm. P = 4 mm Wet grinding device, with automatic paper belt filter, machine trough. Complete machine documentation available.

Condition: used, Year of construction: 1995, material width 650 mm coil weight 7,5 t material thickness 0,6 - 4,0 mm coil internal diameter 460 - 530 (630) mm coil external diameter 1300 mm material cross-cut 1300 mm² Isdpfxov Ehaqe Amyoat no. of straightening rolls 9 straightening roll diameter 60 mm speed 1 - 30 m/min power requirement 30,0 kW Straightening machine KOHLER 50.650/9 with infinitely variable drive, driven straightening rolls, hardchromium-plated rolls, motoric adjustment of the roller cassette Decoiler KOHLER 7500.1 with auxiliary drive, hydraulic centralized expansion, hydraulic snubber roll, attachment jaws for expansion of the inner diameter to approx. 580 - 630 mm, motoric lateral movement, hydraulic lifting table Servo roll feed WEINGARTEN WEP 65 coil loop control via light guard