Used Wieland Resistance Module for sale (6,302)

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) Bdedpfx Aevhctwsf Aoh - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: excellent (used), Nordson Hot Melt Heated Hoses Bdedpfx Aowuqfyof Ajh 4 qty 8 ft long heated hoses Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included In excellent working condition

Condition: good (used), Osram 897 4121 152 1217 BS Modul We have eleven pcs in stock, price is for one pc only. Bsdovx T N Djpfx Af Ajdh

Condition: new, Year of construction: 2026, functionality: fully functional, Roller Conveyor 1 m with 2000 kg Load Capacity The 1 m roller conveyor with a load capacity of 2000 kg is a specialized roller feeder designed for intensive material handling tasks under industrial load conditions. Thanks to its reinforced steel construction and bearing-mounted rollers with a diameter of 90 mm, it ensures safe and stable guidance of even the heaviest metal components with large cross-sections. It is ideally suited for use with band saws and heavy-duty cutting centers where precise positioning of materials is required. Main advantages of the machine High load capacity of 2000 kg – designed for handling extremely heavy workpieces. 4 steel bearing-mounted rollers – ensure smooth and accurate material movement. Large rollers with a diameter of 90 mm and a length of 470 mm – suitable for transporting wide and heavy components. Height adjustment range of 545–855 mm – compatibility with various types of machine tools and workstations. Modular design – possibility of connecting multiple conveyors into a complete technological line. Construction and technology The foundation of this roller conveyor is a welded steel frame, additionally reinforced to increase resistance to bending and twisting. The steel bearing-mounted rollers are installed in precision-made supports, preventing axial play and ensuring long service life. Each section features independent height adjustment, allowing the conveyor to be adapted to various types of machine tools and workstations. Precision and work efficiency Thanks to the use of large-diameter rollers and a durable supporting structure, the roller conveyor guarantees precise guidance of heavy and large-sized components. It reduces the risk of disruptions during machining operations and improves process repeatability. The possibility of connecting multiple modules allows the creation of an efficient material handling system for raw or processed components. Applications The roller conveyor is suitable for: Heavy steel construction plants Profile cutting and prefabrication lines Metalworking workshops and serial production facilities Cooperation with band saws and gravity-fed cutting machines Standard equipment Bodpovu S Ausfx Af Aodh 4 steel bearing-mounted rollers 90 × 470 mm High-rigidity steel frame Individual height adjustment system Technical specifications Parameter Value Roller diameter 90 mm Working roller length 470 mm Total roller length 500 mm Number of rollers 4 Conveyor length 1000 mm Conveyor width 600 mm Working height 545–855 mm (adjustable) Maximum load capacity 2000 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 3 pieces -Type: Mod.1,5 EW 20° see photos -Hole: Ø 32 mm Bdjdsv D Dnbepfx Af Ash -Price/Delivery: complete -Transport dimensions: 190/170/H120 mm -Total weight: 9.5 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hobs, stud hobs, 7 pieces -Type: Mod.1,75 EW 20° see photos Bsdpjv D Dn Ujfx Af Aodh -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 350/190/H120 mm -Total weight: 22.2 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 6 pieces Bdjdpov D Duzjfx Af Ash -Type: Mod.2.5 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 270/175/H125 mm -Total weight: 19.4 kg

Condition: like new (used), Year of construction: 2012, Parker Engineering & Design Vertical Light Stack Module For testing solar modules Photovoltaic modules Electrical and mechanical safety testing Support for product development, design and quality control Detection of potential problems during development Bdjdpfxeh Rvh Sj Af Ajh Quality and safety control  Endurance test stand  Temperature control  Mobile on rollers Entry pockets for forklift trucks 400 VAC, 3.PH, 50 AMP IR. 10,000 amp Year 2012 Weight 1400 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further test equipment - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, single block -Manufacturer: Siemens, Simatic C1 single block electronic module -Type: 6EC1 653-3A -Number: 3x module available -Price per piece -Dimensions: 65/10/H100 mm -Weight: 0.1 kg Bedpfsh Ap Arex Af Aodh

Year of construction: 2014, condition: used, Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: Siemens, braking resistor Bdsdsgd D Ixjpfx Af Ash -Type: 6SE6400-4BD16-5CA0 -Power: 13 kW -Dimensions: 185/185/H285 mm -Weight: 4.0 kg

Condition: ready for operation (used), Philips 4022 224 6886.4 video module PLC circuit board, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bdsdpfx Aei Ecdysf Aoh

Condition: used, SPIRAL ELEVATOR WITH MODULAR BELT Item: M-1451-lift-spiral Spiral elevator, Very nice spiral elevator with modular belt Elevator Inlet 25o mm, Outlet 2350 mm. Bedpsi E Afuofx Af Aedh Belt Width 400 mm. , 380v

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module -Manufacturer: Siemens Simatic S5 memory module Memory Submodule -Type: 6ES5 375-1LA15 -Number: 17x modules available -Price per piece -Dimensions: 60/90/H15 mm -Weight: 0.1 kg/pc. Bsdehy Rn Nepfx Af Ajdh

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module -Manufacturer: Siemens Simatic S5 memory module memory submodule Bjdpfohy Rpbox Af Aedh -Type: 6ES5 375-1LA21 -Number: 3x module available -Price per piece -Dimensions: 60/90/H15 mm -Weight: 0.1kg/pc.

Condition: ready for operation (used), Fanuc A06B-6110-H030 Servo Amplifier Module Version: C SN:V02472718, used, normal signs of use, 100% functional, scope of delivery as per photos Bedsrrbahepfx Af Aedh

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. Bdsdpfxeq Nf Uwj Af Aoh 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications. Bedpfx Afoq Ngafs Asdh

Condition: new, Year of construction: 2026, HSI Crusher and Impact Crusher: Efficient Solutions for Limestone and Talc Crushing Introduction An HSI crusher (Horizontal Shaft Impact crusher) is a highly efficient crushing machine widely used in mining, quarrying, and aggregate production. As a key component in a limestone crushing plant, it delivers precise shaping and high reduction ratios. Whether used as a limestone crusher or talc crusher, the HSI impact crusher ensures consistent particle size and superior performance across various materials. Features of HSI Impact Crusher High Crushing Efficiency The impact mechanism uses high-speed rotors and blow bars to achieve fine and uniform crushing results. Versatile Applications Suitable for medium-hard to soft materials such as limestone, talc, gypsum, and coal. Adjustable Output Size Hydraulic or mechanical adjustment systems allow easy control of product size. Durable Components Wear-resistant blow bars and liners extend service life and reduce maintenance costs. Easy Maintenance Quick access doors and modular design simplify inspection and part replacement. Energy Efficiency Optimized rotor design and balanced operation minimize energy consumption. Technical Specifications (Typical Range) Model:1214 Max input size： 300 mm, Capacity: 100-140 t/h Model:1315 Max input size: 350mm Capacity: 150-200 t/h Specifications may vary depending on material hardness and feed size. Applications Limestone Crushing Plant: Primary or secondary crushing of limestone for cement, aggregates, and construction materials. Talc Crusher: Fine crushing of soft minerals like talc and gypsum for powder production. Aggregate Production: Produces cubical-shaped aggregates ideal for asphalt and concrete. Recycling: Effective for crushing concrete, asphalt, and demolition waste. Why Choose a Reliable Impact Crusher Manufacturer Selecting a trusted impact crusher manufacturer ensures high-quality materials, advanced design, and reliable after-sales service. A professional supplier provides customized solutions for specific materials, such as limestone crusher or talc crusher, ensuring optimal performance and long-term durability. Bdsdpfxsq Ny Saj Af Ajh Impact Crusher for Sale Modern impact crushers for sale feature advanced automation, energy-saving systems, and improved wear resistance. They are ideal for operators seeking high productivity, low operating costs, and consistent output quality in both stationary and mobile crushing setups. Conclusion An HSI impact crusher is a versatile and efficient solution for crushing limestone, talc, and other medium-soft materials. With robust design, adjustable settings, and high throughput, it plays a vital role in any limestone crushing plant or mineral processing line. Choosing the right impact crusher manufacturer ensures reliable performance, reduced downtime, and long-term value.

Condition: used, Braking resistor, charging resistor, damping resistor, filter resistor, braking chopper -Manufacturer: SEW Eurodrive, braking resistor type BW 072-003 -Item number: 802 265 8 826 058 3. -Power: 75 Ohm/250W -Quantity: 1x resistors available -Dimensions: 110/80/H15 mm Bodpoq Untrjfx Af Aedh -Weight: 0.3 kg

Condition: used, Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, temperature control card, amplifier card -Manufacturer: Moog, control card from Battenfeld injection molding machine Bdodpfx Afsqku Nqe Aoh -Type: D121-014-A004 -Total dimensions: 270/115/H60 mm -Weight: 1.1 kg

Condition: used, CNC control, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Baldor, circuit board electronic module circuit board from press brake HACO PPES 30135 -Type: TEM 060-06-01-1 Bodpfx Aord Adqof Aedh -Individual components: see photos -Dimensions: 165/100/H250 mm -Weight: 0.9 kg

Condition: used, CNC control, power supply, power supply, switching power supply, power supply, servo module, control unit, Promodul Bsdpfxorfztwj Af Aedh -Manufacturer: Schleicher, Promodul control unit from Ilsemann KCD 1 packaging machine -Type: KEG 24-30 -Dimension: 600/145/H180 mm -Weight: 7.7 kg

Condition: good (used), PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg Bdodporb E Ewefx Af Aoh

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module Bsdpforb E Hfox Af Asdh -Manufacturer: Siemens, Simodrive 611 LT module INT. 2X15A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AB00-0AA0 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

Condition: used, Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module -Manufacturer: Festo, input module -Type: CP-E16-M12X2 -Item no.: 18206 Bjdpfsq Awamex Af Aedh -Quantity: 1x modules available -Dimension: 145/80/H55 mm -Weight: 0.5 kg