Used Wrightfield Spray Glazer for sale (1,867)

Condition: used, mileage: 2,72,250 km, power: 324 kW (440.52 HP), first registration: 06/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro6, Year of construction: 2012, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #480 MAN TGS 26.440 6x2 with KROLL High-Pressure Jetting and Suction Body with Water Recovery WRS2 Body KROLL Fahrzeugbau-Umwelttechnik GmbH * Type K 1.0-13.0/29 P * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Maximum reach on pivot side: 5,200 mm * Tank material: S355J2+N (St. 52.3) * Water recovery system * Telescopic piston with 3 locking positions * EMPTYING: via pneumatically operated piston * SLUDGE WATER DRAIN DN 80: for returning dirty water through the boom into the sewer. * Water compartments on the sides Chassis MAN TGS * 26.440 6x2 * manual transmission * EURO 6 * Fuel capacity approx. 400 l Podewwf S Tepfx Aahjgr * Driver’s cab color: Municipal Orange RAL 2011 * 2x LED beacon lights on the cab * Reversing camera * Air conditioning Vacuum system CVS WR 3100, approx. 2,465 cbm/h at 400 bar * Drive: flexible, via drive shafts, V-belts, and pneumatically operated friction clutch from the vehicle engine’s PTO. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Maximum reach on pivot side: 5,200 mm High-pressure system Uraca P 3-45, approx. 345 l/min at 205 bar * Drive: flexible, via drive shafts, V-belts, and pneumatically operated friction clutch. * Large HD hose reel for 240m 1" DN 25, swivels 180° * Equipped with approx. 200m DN25 * Small HD hose reel for 80m DN 13, hydraulically operated * Equipped with approx. 60m DN13 Special features - hose storage cassette with telescopic boom DN 125 * Infinitely variable height adjustment of suction hose via hydraulic roller guide carriage * Suction hose boom, hydraulic operation and telescopic, swivels 180° * KROLL water recovery WRS2 * Water spray gun * LED beacon lights * LED work area lighting * Work functions remotely operated via CAN-BUS technology * Radio remote control * Reversing camera with 7" color monitor * Soundproof enclosure in pump area * Large tool and hose storage boxes * Toolbox * Holder for traffic cones * Vice * Pulley for banana/guide device * Large advertising boards on right and left For further detailed information and/or photos, please contact us directly. You can find a wide selection of further vehicles for PURCHASE or RENTAL at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale exclusively pursuant to our general terms and conditions and under exclusion of any warranty. Special equipment: Front axle load 9.5 t, elevated exhaust pipe on right, co-driver bench seat, rear axle differential lock, ETA circuit breaker, flame-start device, heavy-duty roll stabilization, automatic climate control, trailing axle NOL-08 steered, liftable, PTO NMV221, beacon (2), external sun visor, fleet management system control module, reinforced front axle shock absorbers, preparation for engine start/stop system at end of frame.

Year of construction: 2001, condition: used, Stainless steel pressure tank for approx. 10 hl net capacity; cooled by means of double jacket on the frame and firmly welded insulated. Individual sale conceivable. Additional title: year of construction 2000/2001 Gross content: 1122 l Perm. working overpressure: 3 bar Perm. working temperature: 20 °C Pjdow Td Epspfx Aahsgr Content cooling zone: 5 l Length: 1000 mm Width: 1000 mm Height: 1700 mm Material: stainless steel Features: Manhole in the frame, spraying head with spraying head line and shut-off flap DN 25, safety valve and manometer, outlet flap, thermometer Height-adjustable tube feet

Condition: used, Spraying the full product with cold water to cool it down to approx. 40 °C. Allows clean labelling and creates a vacuum in the bottle. With cooling tower for recooling the spray water from the tunnel cooler with recirculation. Additional title: full product cooler, with splash water recooling Capacity of filling line: 5000 bo/h Pedsw Tmpdjpfx Aahogr Features: Cooling tower for spray water recooling with circulation (Richter Cooling Systems, 2015)

Condition: used, Year of construction: 1998, Overview  This bottle washer was manufactured in 1998 by the German company PAC. The CB 14-0,5L-R-7 LII Compact model is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures effective cleaning through a multi-stage process using caustic and hot-water baths. The unit has 14,175 operating hours and is in good working condition. Technical data - Capacity: 7,500 bottles/hour - Adjustable speed range: 3,750 – 7,875 bottles/hour - Cycle time: 6.72 seconds - Total treatment time: 11.65 minutes - Bottle formats: Up to Euro-NRW - Bottle rows per carrier: 14 - Bottles inside machine: 1,456 - Bottle carrier trays: 110 Pgjdpfx Aaexn A S Nehjr - Effective spray times: - Hot lye 8.96 seconds - Lye II 8.96 seconds - Hot water II 8.96 seconds - Hot water I 8.96 seconds - Cold water: 13.44 seconds - Fresh water max.: 8.96 seconds - Utilities - Water consumption: 3.25 – 3.38 m³/h at 60°C - Power connection: 12.0 – 12.9 kW - Thermal energy consumption: 3,528 × 1000 kJ/h - Dimensions - Length with cabinet: 7,020 mm - Width of frame: 1725 mm - Height: 2300 mm

Condition: used, Year of construction: 1993, Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Pgodpfjyb Sxaox Aahsr Technical Data - Manufacturer: Klinger - Type: BC 16/1 - Year of manufacture: 1993 - Application: Returnable glass bottles - Material: Full stainless-steel construction - capacity: 20.000 bottles/h Features - Complete stainless-steel construction - Steam extraction system - Finger infeed and finger discharge - Chemical dosing system - Rotating spray pipe system - Lauer control panel - Conductivity measurement - Stainless-steel filter inserts - Plate heat exchanger - Compatible with standard bottle formats

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, NEW NEW Convection oven Unox Bakertop X 10 Digital ID NEW NEW Convection oven for 10 trays, 600 x 400 Unox oven, intelligent performance Touch panel with 1000+ programs Core temperature probe USB port Top model with AI Only available from us, DGUV V3 certified Pgodpfxoyaf Dms Aahjr Connection: 400V, 32A-CEE plug Water connection: 3/4 inch, water drain: DN 40 Dimensions: 860 x 1018 x 1219 mm, W x D x H Oven NEW & SAB tested 12 months warranty + spare parts service Option: Pure water filter Baking trays Lievox proofing cabinet Ethernet connection DDC.App Exhaust hood with condensate condenser Spray & Rinse cleaner Service package Base frame Maintenance contract Delivery service Instruction and commissioning Visit our large showroom!

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height Pgedpfx Aoyvt Exjaher 2 mm edge coils Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.

Condition: used, Year of construction: 1983, Additional title: lying tank in container Capacity: 32 hl Operating pressure: 2 bar Operating temperature: 20 °C Length: 4,65 m Psdpfx Aexbqrqjahogr Width: 2,3 m Height: 1,95 m Weight: 2500 kg Features: Beer pump, thermometer, gas measurement, flow meter (Diessel), 2 cable drums, hose reel, safety valve, cleaning and filling connection, spray head, manometer, empty detection electrode Control cabinet, compressed air compressor (AltasCopco), pallet for 4 CO2 bottles, valves, pressure reducer

Condition: new, Hydraulic Thread Tapping Machine Manufacturer: CMA Model: RHR 24D Plus Condition: New machine Standard features: - Ball-bearing parallel arm - Hydraulic unit - Digital speed display - Digital depth adjustment - Clamping table 800 x 600 mm (T-slot: 19 mm) - Quick-change chuck - Micro spray system for tool lubrication - Base frame - Operating manual Pgedpfx Aaoyazfyshjr

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant Podpfx Aaexgua Aehjgr 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: used, Year of construction: 1991, Vertical 6 bar stainless steel pressure tank with dished ends and various fittings and equipment. Podpjxlpf Dsfx Aahegr Additional title: vertical stainless steel tank Volume: 10560 l Max. working overpressure: 6 bar test pressure: 7,8 bar Max. working temperature: 10 °C Length: 1900 mm Width: 1900 mm Height: 4770 mm Material: stainless steel 1.4301 (AISI 304) Position: standing on 3 pipefeet Base construction: bottomed shells Features: Cleaning air/valve combination, cleaning line, CIP spray head, manhole, hose level indicator, sampling tap, pressure gauge, bunging device, safety valve, vacuum flap

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MZWP01, Equipment: CE marking, Automatic shrink sleeve labeling machine, this series of equipment is a fully automatic intelligent packaging line that integrates bottle feeding, bottle sorting, labeling, and shrink label functions. The design spirit of this equipment is true high speed, precise positioning, streamlined manpower, and perfect packaging. It is suitable for beverage and health food factories and has the functions of beauty, easy cleaning, and maintenance. The new steam shrinkage tunnel greatly improves the thermal shrinkage efficiency. It is easy to adjust and maintain for different and irregular bottle shapes such as round bottles, square bottles, and flat bottles, with smooth shrinkage. The steam spraying method adopts a separate steam drum design, and the pipeline is smooth and does not occupy space. The spraying outlet is divided into three sections on each side, and the height, front and back, and gas output of each section can be adjusted separately to achieve the most perfect shrinkage effect. Pgedpjxum Tqsfx Aahor

Condition: used, Year of construction: 1994, Pressure tank with two dished heads, central outlet and manhole. Pjdpfxsyzh Rys Aahsgr Additional title: pressure tank Volume: 7366 l Working pressure: 3 bar Width: 1850 mm Height: 3300 mm Weight: 400 kg Material: stainless steel Position: vertical Base construction: on feet Features: central outlet, manhole, cleaning line, CIP spray head, 2-hole RLV, bunging device, pressure gauge, sampling tap, level indicator, discharge line with hand valve

Condition: used, Year of construction: 2001, Manufacturer : Forberg Model : FT20 Year: 2001 Type: Paddle dryer Description: The product is dried by blowing hot air through the mechanically suspended (fluidised) product. The humid air and suspended particles rise towards the primary filter. A fan blows the humid air into a three-stage water-cooled coil cooler. The condensate from the dehumidified air is drained from beneath the chamber. An electric heater reheats the cold, dry air, and the air returns to the mixing chamber. Material : stainless steel Nominal capacity: 20 litres Mechanical mixing: two counter-rotating blade shafts Variable speed: yes (see control panel) Forced-air ventilation: 1 cold-air fan and 1 hot-air fan Cooling unit: tube heat exchanger, external source fluid connection, condensate drain. Heating system: 20 kW Temperature and humidity sensor Product sampling Infastaub AJN 024 air filter / dust collector: surface area 2 m² Cleaning filters with compressed air PLC + HMI: Siemens These options are available and are subject to an additional quote Lump breaker for wet granulation. Pgedpfx Aezbypyeaher Liquid spraying Dimension : 326 x 97 x 230 cm Operating manual and wiring diagrams Video available when powered on  

Condition: used, Year of construction: 2025, OVERVIEW This Hermis TP-HRW 20 stainless steel tunnel pasteurizer is a new and unused machine, manufactured in 2025, designed for the pasteurization of beer in 500 ml bottles. The pasteurizer has a capacity of approx. 20,000 bottles per hour and is configured as a 10-zone tunnel pasteurizer with heating, pasteurization and cooling sections. The machine is fully made of stainless steel AISI 304 and is equipped with an external plate heat exchanger for the heating system. The process is controlled by a Siemens S7-1200 PLC with a Siemens Simatic 12" HMI touch panel, allowing automatic control of the pasteurization process. The system is designed for a product inlet temperature of approx. +4°C, a pasteurization temperature of approx. +62°C to +64°C, and an outlet temperature of approx. +34°C to +35°C. The pasteurizer provides a total treatment area of approx. 74 m², with a treatment length of approx. 13.5 m and a total machine length of approx. 15.3 m. The complete process cycle is approx. 45 minutes, achieving approx. 24 PU based on the given 500 ml beer bottle configuration. TECHNICAL DATA - Manufacturer: Hermis - Model: TP-HRW 20 - Machine Type: Stainless steel tunnel pasteurizer - Condition: New, never used - Year of Manufacture: 2025 - Product: Beer - Container Format: 500 ml bottles - Capacity: approx. 20,000 bottles/hour - Treatment Area: approx. 74 m² - Number of Modules: 7 pcs - Total Number of Zones: 10 zones Pgsdjy Ul Dwjpfx Aahjr - Zone Configuration: heating, pasteurization and cooling zones - Treatment Length: approx. 13,500 mm - Dimensions: approx. 15,300 x 5,900 x 2,200 mm - Total Length incl. infeed / discharge conveyor: approx. 15,000 mm - Main Construction: Stainless steel AISI 304 - Heating System: Plate heat exchanger outside the pasteurizer - Steam Pressure: approx. 3 bar - Pasteurization Temperature: approx. +62°C to +64°C - Product Inlet Temperature: approx. +4°C - Product Outlet Temperature: approx. +34°C to +35°C - Pasteurization Time: approx. 10–11 minutes - Total Cycle Time: approx. 45 minutes - Pasteurization Units: approx. 24 PU - Water Consumption: approx. 2.2 – 3.0 m³/h during stable operation - Water Volume in Pasteurizer: approx. 6,600 l - Steam Consumption: approx. 790 kg/h during stable operation; approx. 1,250 kg / 30 min during start-up - Steam Temperature: approx. +143°C at 4 bar - Power Supply: 400 V AC, 3/N/PE, 50 Hz - Control System: Siemens S7-1200 - HMI: Siemens Simatic 12" touch panel - Main Conveyor: Plastic conveyor by Movex - Active Transfer: Rexnord - Plate Heat Exchanger: Funke - Pumps: Stainless steel pumps by Lowara - Spray Nozzles: Lechler - Steam Valve: Bürkert - Air Supply System: SMC - Level Sensors: Endress+Hauser / Negele - Temperature Registration: Endress+Hauser - Temperature Sensors: Negele - Included Features: Automatic pasteurization control, ECO graph / data logger, stainless steel electrical cabinet, air conditioner for electrical cabinet

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for adjusting the units Fully automatic edge magazine for roll and strip material GLU-JET adhesive application station, cartridges + PU adhesive Adhesive application using nozzle technology Pgedpfxszcau Eo Aahor Sensor-controlled nozzle Workpiece height 6-60 mm Automatic adhesive height adjustment High-quality 3-roller pressure unit, 1st roller motorized Trimming unit, pneumatically controlled for roll and strip material up to 6 mm edge thickness With pneumatic adjustment of the trimming saw angle from 0-10° Routing unit, flush trimming 6 mm, radius routing - chamfer routing - 15° Corner copying unit - 3 mm edge thickness Scraping unit for chamfers and radii with 2 scraping blade holders Surface scraping unit - finishing Buffing unit Spray device in the infeed and outfeed area, as well as for PU Machine with all processing tools Machine is WORKSHOP TESTED From a craft business First delivery 2019 Available from stock in Lieboch

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, ELUMATEC AS 170 – Single-spindle profiling machine Technical data Milling area, horizontal, against stop: 300 x 120 mm Podpfx Aasza Iifehjgr Milling area, horizontal, using template: 285 x 110 mm Milling spindle speed: 12,000 rpm Profile clamping range: 150 x 130 mm, adjustable up to 400 mm Stroke: 105 mm Electrical connection: 230/400 V, 3 ~, 50 Hz Power output: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions AS 170/00 Length: 780 mm Depth: 770 mm Height: 1,500 mm Weight: 200 kg Features Large milling area despite compact design Profiling using side stops or templates (1:1) Pneumatic, two-stage tracing device for different cutter diameters Patented suspension of the tracing lever for precise milling Table height adjustment for profiles up to 400 mm high “Spindle Lock” for quick tool changes Pneumatic material clamping device Metering spray device

Condition: used, 2-vessel stainless steel brewhouse (beraplan, 1997), mounted on a stainless steel frame with a work platform. The brewhouse comprises the following components: - Mash/wort kettle, steam heated, with propeller agitator, mashing nozzle, CIP head and 4 hop dosing hoppers. - Lauter tun with slotted false bottom, rake, spray heads and spent grain pump - Whirlpool as a separate stainless steel vessel (gross volume: 48 hl, manufactured by C. Gresser, 1978) - Two-stage plate heat exchanger (GEA Ecoflex) used as a wort cooler with wort aeration - Spindle station - Control console (Siemens) with buttons and screen for visualising the brewing process. - Control cabinet with S5 module and various other control and regulation elements. - Various other pipework, pumps, valves, measurement and control technology Additional title: Stainless steel brewhouse with a wort discharge capacity of 35 hl, built between Cast wort capacity: 3500 l Operation / Control: Simatic S5-100U Podpfjy Tiytsx Aahogr Features: Mash tun; lauter tun; whirlpool; wort cooler; wort areation; spindle station; control console; control cabinet; various pipes, pumps, valves, measurement and control equipment

Condition: excellent (used), Year of construction: 2002, Arburg 420C 1300-675 with the sprue picker Star Year of manufacture: 2002 Pjdpfx Aozc N H Reahjgr injection unit: Screw diameter: 50 mm injection weight: 297 g Injection pressure: 2080 bar Metering volume: 353 ccm Clamping unit: clamping force: 130 t tie bar distance: 420x420 mm size of clamping platens: 605x605 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - bimetal Type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Covers from the operator side open automatically Dimensions: Weight: 4330 kg Length/width/height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection Podpfszd Afzex Aahjgr CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Year of construction: 2013, condition: used, GEA Sour Cream Thermization Line Capacity: 1,500–2,000 l/h Year: 2013 Installed & Connected – Excellent Overall Condition Complete GEA Process Line We are offering a complete GEA Sour Cream Thermization Line originally designed for the thermal treatment of sour cream and fermented cream products. The line was installed in 2013 and remains installed and connected on site. It is available for inspection and can be offered complete with associated process equipment, automation, and technical documentation. The system was supplied as a complete GEA process line and includes a buffer tank, Pgjdpezffzujfx Aaher thermization skid, hot water circuit, CIP dosing system, pumps, valves, instrumentation, and fully automated process control. Main Application Originally designed for: • Sour Cream • Fermented Cream (25% fat) Potential Applications • Kefir • Cultured Buttermilk • Drinking Yogurt • Ayran • Cultured Dairy Beverages • Other fermented and viscous dairy products Process Capacity • Approx. 1,500–2,000 l/h Original Process Parameters • Product: Sour Cream / Fermented Cream (25% fat)• Maximum product viscosity: 230 cP • Feeding temperature: 15°C • Thermization temperature: 55–70°C • Outlet temperature: 20–50°C Scope of Supply 1. Sour Cream Buffer Tank 10,000 L Stainless Steel Insulated Tank • Approx. 10,000 litre capacity • Stainless steel construction • Insulated design • Agitator with 5.5 kW drive • CIP spray balls • Temperature and level instrumentation • Hygienic dairy execution • Complete with service platform and access ladder Manufacturer: • PRO-WAM Year: • 2013 2. GEA Thermization Skid GEA Ecoflex Plate Heat Exchanger System Complete thermization module including: • Regeneration section • Hot water heating section • Cooling section with ice water • Integrated hot water circuit • Stainless steel skid-mounted designMain features: • GEA Ecoflex plate heat exchanger • AISI 316 heat transfer plates • Maximum working pressure: 10 bar • Hygienic dairy construction • Fully integrated process control 3. Pumps & Process Equipment Product Pumps • Tuchenhagen TP centrifugal feed/CIP pump • Tuchenhagen VPSH positive displacement rotary lobe booster pump Process Equipment • Stainless steel process piping • Automated sanitary valves • Distribution valves • Butterfly valves • Temperature instrumentation • Pressure instrumentation • Auxiliary process equipment 4. Hot Water Circuit Complete hot water generation and control package including: • GEA Ecobraze brazed plate heat exchanger • Grundfos circulation pump • Samson steam control valve • Samson on/off valve • Spirax steam equipment • Expansion vessel with safety module • Temperature instrumentation• Pressure gauge 5. CIP Dosing System Integrated CIP dosing and cleaning section including: • Dosing pump • Suction lances with level sensors • Distribution valves • Water shut-off valve • Water reducing valve Designed for automated cleaning and sanitization of the process line. 6. Automation & Control Fully automated process control system including: • Siemens S7-315 PLC • Siemens MP277 10" HMI touch panel • Profibus / Ethernet communication • Automatic thermization control • Automatic CIP control • Alarm management • Process parameter monitoring • Data recording functionality • Festo pneumatic valve island • Stainless steel control cabinets Automation Level • Fully automatic production operation • Fully automatic CIP operation ...

Condition: excellent (used), functionality: fully functional, Holz Her Auriga 1308 XL FÜ + PU compact design - edge thickness 0.4 - 8 mm SPS-based Edge-Control PPC 231 touchscreen control system motor-driven, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing section fully automatic edge magazine for roll and strip material GLU JET cartridge gluing station + PU gluing glue application via nozzle technology workpiece height 6-60 mm automatic glue height adjustment pressure unit 1912-3, pneumatic trimming unit 1918, pneumatic, for roll and strip material up to 8 mm edge thickness Pgodpfxezib Nie Aahsr with pneumatic adjustment for 0-10° bevel of the trimming saw milling unit 1827 MOT 4, flush trimming 8 mm, radius milling - bevel milling - 15° MOT NC axes controlled via control panel profile milling unit 1832 pneumatic, rounding of corners up to edge thickness 3 mm in a single pass scraper blade unit 1929 MOT2 for bevels and radii with 2 scraper blade holders, NC axes controlled via control panel surface scraper blade unit - finishing buffing unit - polishing spraying system at the infeed and outfeed complete tool equipment included first delivery 2013 machine is FUNCTIONALLY TESTED and in TOP CONDITION available from warehouse Lieboch

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, clearance between the columns: 640 mm, closing stroke: 640 mm, total height: 2,500 mm, total width: 2,400 mm, stroke length: 480 mm, total length: 7,500 mm, column diameter: 120 mm, ejector force: 2,40,000 N, ejector stroke: 145 mm, mold height (min.): 250 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 16,600 kg, clamping force: 4,600 kN, power: 31.5 kW (42.83 HP), workpiece weight (max.): 8 kg, pressure: 160 bar, Equipment: documentation/manual, BÜHLER GDM H-400B Version 6.0 – 460T Complete die casting cell for aluminum with automatic mold spraying and automatic pouring ladle Manufacturer BÜHLER Model GDM H-400B Version 6.0 Year of manufacture 1996 Condition The machine is complete, in good working order, and has been regularly operated. It can be inspected while running after prior arrangement of a viewing date. Description We offer for sale a complete aluminum die casting cell based on the renowned BÜHLER GDM H-400B Version 6.0 injection molding machine with a clamping force of 460 tons. BÜHLER has been recognized for many years as one of the most reputable manufacturers of die casting machines in the world. The GDM H-400B model is a proven design, known for its high durability, precision, and low operating costs. The machine offered is sold as a complete production cell including an injection molding machine, an automatic mold spraying system, and an automatic pouring ladle. This configuration allows for efficient and repeatable production of aluminum castings. The offer includes: Die casting machine BÜHLER GDM H-400B Version 6.0 Year of manufacture: 1996 Pjdozg E Rfopfx Aahogr Clamping force: 4600 kN (460 tons) DATACESS control Complete control cabinet Technical documentation Automatic mold spraying system ACHESON Dog1000FCT.1S-A Year of manufacture: 2000 Automatic lubrication and mold cooling Power supply: 3 × 400 V Control: 24 V DC The system ensures uniform application of the release agent, improves the surface quality of the castings, and reduces the production cycle time. Automatic pouring ladle Equipped with: Siemens SIMATIC HMI Touch control The unit automatically picks up molten metal from the furnace and dispenses the appropriate amount of aluminum into the injection chamber, ensuring high process repeatability and reducing material losses. Technical data of the injection molding machine Clamping unit Clamping force: 4600 kN Second-stage clamping force: 180–420 kN Moving platen stroke: 640 mm Ejector force: 240 kN Ejector stroke: 145 mm Mounting plates Fixed platen: 990 × 1165 mm Moving platen: 990 × 990 mm Distance between columns: 640 × 640 mm Column diameter: 120 mm Molds Minimum mold height: 250 mm Maximum mold height: 780 mm Injection unit Piston stroke: 480 mm Effective piston stroke: 455 mm Available piston diameters: 60–110 mm Maximum aluminum casting weight: up to 8.5 kg Maximum injection pressure: up to 1485 bar Hydraulic system Maximum working pressure: 160 bar Oil tank capacity: 850 liters Electrical parameters Connected power: 31.5 kW Protection class: IP55 Dimensions Footprint: 7.5 × 2.4 m Height: 2.5 m Weight: 16,600 kg Key advantages ✔ Renowned BÜHLER brand ✔ Clamping force of 460 tons ✔ Complete production cell ✔ Automatic ACHESON mold spraying ✔ Automatic pouring ladle ✔ Siemens SIMATIC HMI control ✔ Complete technical documentation ✔ High production efficiency and repeatability ✔ Possibility of producing medium and large aluminum castings Application The machine was operated in a production facility and is offered as a complete workstation. It can be inspected and its technical condition verified after prior arrangement of a viewing date. Availability The machine is available immediately. Loading and transportation arrangements can be made within Poland and throughout Europe.

Condition: used, Year of construction: 1993, Automatic Aerosol filling and crimping machine. Spray bottle equipment. Pjdpfozg I Tpjx Aahjgr Cycle = Blowing / Product filling / Valve installation / Valve crimping / Gas filling / Pressure control / Pump installation / Cover installation – Aerosol 30 ml – Current format: 30 ml filling on bottles d.43 x h.86 mm, valve neck 20 mm – Dosing with Hibar pumps HDB-2B-CV – Cap / cover installation – RNA bowl feeding valves + caps – Double index – Capacity: approx. 70 units / minute – year 1993 – Continuous control by PLC– 18 position tray + technical file available on request – Plan entry/exit conveyor belt Perfect line for all pump spray product.

Condition: new, empty load weight: 2,798 kg, maximum load weight: 15,202 kg, overall weight: 18,000 kg, axle configuration: 2 axles, suspension: air, tire size: 385/65 R22,5, wheelbase: 5,050 mm, Year of construction: 2026, Equipment: ABS, Unladen weight: 2798 kg, permissible total weight: 18000 kg, tire size: 385/65 R22.5, axle 1: , axle 2: , air suspension, underrun protection, electronic braking system (EBS), toolbox, connector plug 1x15 and 2x7-pin, anti-spray, telematics system, drawbar buffer, parking height 1: 1120 mm, parking height 2: 1320 mm, driving height: 435 mm, with 1 pair of small centering rollers at the front, in the middle, and at the rear, drawbar: 2000/1300/100/30, drawbar tube extendable by 6x100 mm, drawbar pin, inner diameter: 40 mm, outer diameter: 110 mm, thickness: 30 mm. You can find our complete vehicle range at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, as well as full-service and telematics services. We will be happy to advise you. Pgedpfezhpzwsx Aaher