Used Dalla Bona Molploeg 3 Pm for sale (64,779)

Condition: used, New: Yes Kdsdpfx Ao Aar S Hjniou Colour: Blue Working width: 200 cm

Condition: used, New: Yes Kedpfx Asz S U Hfsniodu Please contact us for more information.

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) No. Device name set. Description DRYER LINE: - bale feeder - length 9m - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Kjdpfx Ansim I Rujiodu Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Control panel with software Power and control cabinets, wiring List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Power and control cabinets, wiring

Condition: excellent (used), 3-phase DC spot welding machine, A/DH version Brand DALEX Type PMS 14-5 G3 Thrust: 550 mm Rated power at 50 & duty cycle: 150 kVA Secondary short-circuit current: 65 kA Secondary open-circuit voltage: 3.35 - 6.7 V Electrode force: 80-1,200 daN Weight: 1,620 kg with double-stroke cylinder 4-position switch Main switch Mounted control cabinet according to VDE 0110 with 100-program MPS 8043/1 welding controller Kdsdev Uwyropfx Anieu

Condition: ready for operation (used), Year of construction: 2007, HPM 12-33-2 Kdjdpfjz Spu Dex Aniju two-roll machine, 3300mm wide, 1200mm diameter, steam-heated. Width approximately 460cm and length 8 meters.

Condition: good (used), Year of construction: 1992, Mikron WF 3 DPM Tool Milling Machine Mikron WF 3 DPM with Heidenhain TNC 135 Control, Year 1988, Overhauled in 2014, Excellent CONDITION Technical Data: - Year of manufacture: 1988 / 2014 - Fixed angle table - Spindle speed: 31.5 to 3150 rpm - Stepless feed in 3 axes: 0 to 2000 mm/min - Travel paths X/Y/Z: 500/500/400 mm - Rapid traverse x/y/z: 3 m/min - Table size: 800 x 450 mm - Table load capacity: 250 kg - Vertical quill stroke: 90 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight approx. 1950 kg - Space requirement approx.: 2.3 x 2 x 2 m - Drive power: 12 KVA Accessories and Equipment: - Heidenhain TNC 135 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake Kdsdpfxsyxc Uns Anisu - Technical documentation, spare parts lists, control system manual, and programming examples - Handwheels - Coolant system About the machine: A Mikron WF 3 DPM tool milling machine with Heidenhain TNC 135 control is being offered. This universal milling machine is in excellent original condition. It comes from a workshop where it was used only occasionally for prototyping. The control system is very user-friendly. In addition, the machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very easy thanks to the swing-away vertical head. The guides are lubricated regularly via central lubrication. The Mikron has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Mikron under power at our facility. You can find more milling machines from well-known manufacturers on our website.

Condition: excellent (used), Spot welding machine with single-acting cylinder and flange-mounted electrode holders above and below Make: DALEX Type: PMS 14-3 Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 54.5 kA Secondary open circuit voltage: 7-14 V Electrode force: 80-1,200 daN Equipped with: 8-step switch Main switch Kdedpfx Anetuwz Ioiou Attached control cabinet HARMS+WENDE Synchronous welding control MPS 200 8 welding programs with AEG nameplate Start via foot pedal

Condition: used, Year of construction: 2005, Cuts fillets into portions by weight The Marel IPM3 X300 is a portion cutter for fish, chicken and meat fillets. Each piece is scanned on the belt, and the machine works out where to cut to get portions of a fixed weight or length. You get more out of every fillet with less trim left over. The machine was built in 2005 and has a perforated belt 280 mm wide. Settings are made on the control panel with a colour screen. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Portion cutter (fixed weight or fixed length) Products: Fish, chicken and meat fillets Belt: Perforated, 280 mm wide Scanner: Cameras with laser line Controls: Control panel with colour screen Electrical: 3 x 380–480 V Construction: Stainless steel Kodpfsz Nc Rrsx Aniodu

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 560 mm, workpiece height (max.): 500 mm, workpiece diameter (max.): 730 mm, total height: 3,560 mm, total length: 5,925 mm, total width: 2,695 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 23,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 10,000 rpm, spindle nose: Big plus BT50, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, 5-axis Vertical Machining Center Kdodpfx Ano Aawnmjieu Technical details: CNC Control Mazatrol Fusion 640 M 5x Table size 500x500 mm Table load 500 kg Number of pallets 12 (PMC) Max workpiece Ø 730x500 mm Movement X/Y/Z-axis 730-850-560 mm C-axis (table rotation) 360° A-axis (table tilt) +30/-120 Spindle speed 35-10.000 1/Min Spindle Taper Big Plus BT50 Spindle motor 30/22 kW Magazin capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 520-003956, Lisec spacer bender Kedpfx Asvktytenijdu Printer for spacers not available

Condition: like new (used), Year of construction: 2024, functionality: fully functional, punching force: 30 t, total height: 2,220 mm, total width: 5,210 mm, total length: 6,050 mm, working range: 2,540 mm, travel distance X-axis: 2,540 mm, travel distance Y-axis: 1,540 mm, punching diameter: 25 mm, workpiece weight (max.): 170 kg, overall weight: 15,000 kg, Maximize your sheet metal fabrication efficiency with this heavy-duty, high-precision Baykal BPM-TE 1525x30 CNC Punch Press. Engineered with an ultra-rigid "O" Frame design, this industrial workhorse offers unparalleled stability, minimizing frame deflection even under full-capacity operations. Kodpjzcb Exefx Aniodu Equipped with premium Rexroth servo motors and linear guides, it delivers blistering speeds up to 900 strokes per minute and up to 1G acceleration—perfect for high-volume production runs and precise part creation. Manufacturer: Baykal Makina Model: BPM-TE 1525X30 Condition: Excellent / Fully Operational (Used) Location: Plovdiv, Bulgaria Availability: Immediate Technical Specifications Punching Force: 30 Tons (300 kN) Working Range (X x Y): 2540 mm x 1540 mm (Without repositioning) Maximum Sheet Thickness: 6.4 mm Maximum Workpiece Weight: 170 kg Maximum Punching Rate: 900 hits/min (1mm pitch nibbling) / 360 hits/min (25mm pitch nibbling) Turret Capacity: 12 Stations Indexable Stations: 3 x Indexable "D" Stations Maximum Punching Diameter: 88.9 mm Axes Layout: X, Y, Z, C1, C2, T Positioning Accuracy: ± 0.1 mm Repeatability: ± 0.04 mm Combined Axis Speed (X+Y): 128 m/min Key Features & Machine Benefits Finite Element Analysis (FEA) Optimized Frame: The stress-relieved, normalized O-frame ensures structural integrity, flawless punching accuracy, and a prolonged tooling life. Advanced CNC Control Unit: Powered by an ergonomic, free-standing Bosch MTX CNC control system with a 15.6" TFT Windows screen for simple programming and high machine availability. Smart Nesting Software: Includes Lantek Sharp Punch software for offline programming, automatic nesting, and fast DXF file importing to drastically reduce material waste. Material Protection Table: Features a smart combination of a moving table with ball transfers and brushes to prevent scratching on delicate sheet surfaces. Heavy-Duty Work Clamping: Fitted with pneumatically operated sheet clamps featuring a sliding system and sensors to eliminate material slippage and prevent sheet jamming. Integrated Production Aids: Built-in work chute with a mobile storage box for small parts collection, automatic lubrication system, and waste collection box. Safety Features: CE certified, equipped with warning lamps and light barrier safety curtains.

Condition: excellent (used), Air-operated, water-cooled 3-phase direct current spot welding machine make DALEX type PMS 11-4 G3 Asload: 650 mm with special cylinder with low pressure range of 20-120 daN Rated power at 50 % duty cycle 60 kVA Sec. short-circuit current: 25 kA sec. open-circuit voltage: 3.68 V with add-on switch cabinet in accordance with VDE 0100 Main switch Synchronous welding control 8036 Ksdpfxju A Dg Eo Aniodu Weight: 685 kg

Year of construction: 1999, condition: used, Year of manufacture: 1999 Colour: Grey Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Kdjdpfx Aswnhiceniou Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1992, machine/vehicle number: 56979, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: AC, pressing force: 135 t, total length: 5,000 mm, total width: 1,200 mm, total height: 2,200 mm, overall weight: 7,500 kg, machine is functional ok, from down linear tool is one channal damage. Kdedo Aarbhepfx Aniju perfect machine for starters or when a company have only periodic press jobs. we sale out by fact that we need the space. machine is unther still on power

Condition: excellent (used), 3-phase DC spot welding machine DALEX, Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100-600 daN Arm reach: 550 mm with mounting control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 Weight: 740 kg Kdjdpohmvawjfx Anisu

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 15040169 + 0805014349, Pfeiffer Vacuum GmbH Turbomolecular pump with drive electronics, PM P03 020 GA, TPH 2101 P + PM C01 713, TC 750 Turbo pump model: PMP03020GA, TPH2101P Drive electronics model: PMC01713, TC750 Turbomolecular pump: Serial number: 15040169 Inlet connection nominal diameter: DN 250 ISO-K Outlet connection nominal diameter: DN 40 ISO-KF Flood connection: G1/8" Kdedpfxsvrzako Anisu Nominal speed: 31,500/min (525Hz) Suction speed N2: 1,900l/s Max. backing pressure N2: 1.5mbar Max. backing pressure He: 1.0mbar Max. backing pressure H2: 0.5mbar Oil: PM 016 144-T Drive electronics: Serial number: 0805014349 Input: 24/48/72/140V DC +/-5%, 5.4A Output: 0-140V AC, 0-1600Hz, 6.5A Note on condition: 1. Statements on operating hours are approx. 13,000h with approx. 1,600 starts and stops. 2. Process gases: nitrogen and argon 3. Process dusts: chromium nitride and steel 100Cr6 4. The pump was stored in full working order in 2018 and cleaned externally.

Year of construction: 2006, condition: used, Year of manufacture: 2006 Colour: Grey Empty weight: 2.000 kg Dimensions (LxBxH): 215 x 240 x 210 cm - Year: 2006 - Documentation available: No - CE certificate present: No - Transport dimensions: 2150mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information Kdedpfx Anjzry N Tjieu VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1999, pressure 135 t chamfer lenght 3600 mm distance between columns 3150 mm stroke of upper beam 200 mm ajustment speed 70.0 mm/sec working feed 10.0 mm/sec Kodpfsz Dkznsx Anijdu return speed 80.0 mm/sec 315 bar dayligth 400 mm table height 915 mm column arm 250 mm engine output 15.0 kW weight 8800 kg range L-W-H 4200 x 1700 x 2600 mm Equipment: - Electro-hydraulic press brake * with torsion bar - HACO NC control (Model ATL 550) for X and Y axes * Computer-controlled multi-axis NC press * Backgauge position pre-selection (electric backgauge) * Backgauge retraction for Z-bends * Bending depth pre-selection * Electric depth adjustment * Memory for 200 programs - Swiveling control panel (front left) - NC motorized backgauge (X-axis) * with 2 manually adjustable stop fingers - NC motorized depth adjustment (Y-axis) - 1x set of sectionalized "gooseneck" (swan-neck) upper tools - 1x rotatable MULTI-V die block - Rear safety guard (sliding door) - 1x mobile two-hand/foot control unit - 2x front support arms (custom-made) - Operating manual

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 403/05, table length: 3,000 mm, power of the servo motor: 1,500 W, table width: 1,500 mm, Equipment: double-sided, With plasma cutting system HyperTherm Powermax 1100 and air drier M.T.A. DE009 Machine was used in the production of ventilation ducts and fittings. Kdsdpsw I D Iasfx Aniju AsperWin (base program for operating CNC machine for Windows. Dxf-files can be imported) Asper Nesting (enables effective creation of nests with a big number of different cut parts to achieve best possible utilization of material with minimum waste) and Air Select (for ductwork manufacturers enables fast and comfortable design of HVAC components).

Condition: used, Year of construction: 2008, x-travel 1350 mm y-travel 900 mm z-travel 750 mm spindle turning speed range 15000 U/min Control iTNC 530 weight of the machine ca. 11,4 t 3-axis vertical machining centre with BÜRENER KFE 63/40-900 Z60 chip conveyor Condition: Well suited for roughing operations Working ranges Kdjdeyyqtuopfx Anisu X-axis travel: 1350 mm Y-axis travel: 900 mm Z-travel: 750 mm Spindle nose to table surface: 135–885 mm Work table Clamping surface: 1425 x 860 mm Max. workpiece weight: 1800 kg Number of T-slots: 10 T-slot width: 1x18H7.9x18H12 Work spindle Speed range: 0 - 15,000 rpm Power: 38 kW Tool magazine: 46 pcs. Tool holder: HSK-A63 Cooling: Water with corrosion protection Footprint L x W x H: 4130 x 3680 x 3150 mm

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,000 h, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 1,600 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 38,000 W, number of slots in tool magazine: 46, tool weight: 8,000 g, number of axes: 5, This 5-axis MIKRON HPM 1350 U was manufactured in 2019. It features an impressive X-axis travel of 1350 mm, Y-axis travel of 1150 mm, and Z-axis travel of 895 mm. The machine includes a robust rotary table with a diameter of 1100 mm and a maximum table load of 1600 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON HPM 1350 U universal machining centre we have for sale. Contact us for further details. Ksdpfx Asz R A Tdenijdu - Control Unit: Heidenhain iTNC 530 HSCI FS (MC 6541 with HDR and Core i7-3 1.7 GHz dual-core processor, 15.1" color TFT)- X-Axis Travel: 1350 mm- Y-Axis Travel: 1150 mm- Z-Axis Travel (Horizontal Spindle): 895 mm- Z-Axis Travel (Vertical Spindle): 700 mm- Motorspindle Overhang to Z-Axis: 700 mm- Swivel Axis A Range: +16° to -120° (136° total range)- Rotary Axis C Range: n x 360°- Simultaneous Axes: 5 / 5 simultaneous- Rotary Table Diameter: Ø 1100 mm (flattened on 2 sides to 1000 mm)- Table Centering: Ø 50 H6- T-Slots: 9 slots, 100 mm distance, 18 H12 width- Max. Table Load (Centered): 1600 kg- Table Clamping Moment: 8000 Nm- Table Drive Torque (100% ED / Max): 1130 Nm / 2300 Nm- Max. Table Speed: 40 rpm- Rapid Feed / Feed Rate (X, Y): 15 / 32 m/min- Rapid Feed / Feed Rate (Z): 15 / 32 m/min- Swivel Rate Feed / Rapid (A-Axis): 11 / 20 rpm (4000 / 7200 °/min)- Max. Feed Force: 10 kN- Acceleration: 4 m/s²- Spindle Speed: 0 - 15,000 rpm- Spindle Taper: HSK-A63 (DIN 69893-1)- Spindle Power (S6 40% ED): 38 kW- Spindle Torque (S6 40% ED): 193 Nm- Tool Magazine Capacity: 46 positions (HSK-A63)- Max. Tool Diameter: 80 mm (fully loaded) / 130 mm (partially loaded)- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Magazine Load: 200 kg- Chip-to-Chip Time: approx. 11 s- Coolant & Chip Management: Chip conveyor with Internal Coolant Supply (IKZ 18-80 bar, frequency-regulated), 30 µm band filter unit, hand wash station- External Coolant Supply: 7 bar, 28 l/min- Air Blast Through Spindle: Yes (up to 10 bar)- Measuring & Calibration Systems: Renishaw OMP60 HSK-A63 3D Infrared Touch Probe, Renishaw NC4 2-piece Laser Tool Measuring System, KinematicsOpt- Smart Machine Features: APS (Advanced Process System), ITC (Intelligent Thermal Control), DNC Remote Network Access, rConnect Live Remote Assistance- Operating Hours:* Control On (Steuerung ein): 46,889 h 58 min 07 s* Machine On (Maschine ein): 42,786 h 48 min 49 s* Program Run (Programmlauf): 9,929 h 46 min 01 s* Drives On (Antriebe Ein): 34,546 h 44 min 31 s* Spindle On (Spindel Ein): 5,660 h 25 min 27 s- Maintenance / Repairs Log Highlights:* Spindle replaced on 10.11.2021 (GF Spindle f. 2/782) with new assembly on 29.11.2021* Hard drive replaced on 23.12.2022* Drive unit replaced on 24.05.2023* Rotary feedthrough (Drehdurchführung) replaced on 07.09.2023* A-axis aligned and spindle adjusted on 21.02.2026- Operating Voltage: 3x 400 V (+6%/-10%), 50 Hz- Connected Load: 67 kVA / 61 kW (with IKZ)- Fusing: 125 A- Compressed Air Supply: 6 + 0.5 bar, approx. 300 l/min Technical Specification Taper Size HSK 63

Year of construction: 1994, condition: used, functionality: fully functional, Perfectly functioning EDM machine AGIE-ELOX MONDO 1/35A Ksdpfsygq D Eox Anisdu

Condition: used, EOS / Transitube Powder conveying system / dosing system EOS Transitube DCL 800/30 PM Automatic powder conveying and dosing system for two components For sale is a used powder conveying system from the manufacturer Transitube / tim plast Anlagenbau GmbH. The system is used for the continuous dosing, conveying, and homogenization of powders, ground materials, or granules and is ideally suited for plastics processing, extrusion, and injection molding. Kdjdpfx Aozn H D Njnieu Technical data: Manufacturer: transitube / tim plast Anlagenbau GmbH Type: DCL 800/30 PM Designation: EOS powder conveying system Dosing system for 2 components 2 material containers, each approx. 400 liters Continuous dosing and mixing Materials: Powder Granulate Ground material / regranulate Power connection: 3/N/PE 400 V AC Frequency: 50 / 60 Hz Connected load: 2.0 kW Weight: approx. 180 kg Dimensions (approx.): Width: 1850 mm Depth: 900 mm Height: 1320 mm Dosing capacity, model-dependent: approx. 50 to 2,000 kg/h Dosing accuracy: ±0.5 to ±2 % Dosing range: 5 to 50 % Additive dosing: 0.2 to 10 % Equipment: 2 dosing containers with hinged lids Automatic control cabinet with touch panel Transitube conveying and mixing system Electrical control Screw dosing Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Various conveying hoses Piping Accessories as shown in the pictures Application areas: Plastics industry Extrusion Injection molding Powder conveying Material dosing Regranulate dosing Mixing systems Production automation Condition: Used Visual condition as shown in the pictures. Scope of delivery as shown in the pictures. Scope of delivery: 1x EOS Transitube DCL 800/30 PM powder conveying system Complete control cabinet Conveying units Motors Pneumatic components Hoses Piping system Accessories as shown in the pictures Important note: The system is sold as shown in the pictures. Please note the scope of delivery in the photos. Tables, tools, or other aids that may be visible in the pictures are not included in the scope of delivery unless explicitly stated. Shipping via freight forwarder is possible. Inspection is possible at any time by appointment. Subject to prior sale and errors. If you have any questions, please do not hesitate to contact us by telephone.

Year of construction: 2012, condition: ready for operation (used), A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible. Kodpfjxr Nwaox Aniodu

Condition: good (used), High-performance spot welding machine, 3-phase DC version, DALEX, type PMS 14-4 G3 Arm reach: 550 mm Rated power at 50% duty cycle: 240 kVA Secondary short-circuit current: 89.5 kA Secondary open-circuit voltage: 4.69 - 9.38 V Electrode force: 80-1200 daN With double-acting cylinder and feed stroke Lower arm support Weight: 1,660 kg Kodpfxsgqxg Ae Aniodu Mounting control cabinet according to VDE 0100 Main switch 4-stage switch Synchronous 2-circuit welding control 8036 S3 Machine will be refurbished.