Used Kuntschar & Schlüter Gtk 50 Blockheizkraftwerk for sale (35,011)

Condition: used, mileage: 1,001 km, gearing type: other, fuel type: gas, color: blue, first registration: 01/2007, Year of construction: 2007, driver cabin: other, Vehicle location: Bovenden, Lajdpfol Rbtnjx Alyjh Former combined heat and power unit from a neighboring hospital! Combined heat and power unit for natural gas operation with an electrical output of 48KW & thermal output of 80KW. 4-cylinder gas Otto engine! Engine type MAN E 0834 E Generator type Marelli MJB 225 MA Rated voltage 400V ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, Year of construction: 2015, operating hours: 38,000 h, functionality: fully functional, power: 70 kW (95.17 HP), 1. HKW Kuntschar + Schlüter GTK70 (70 kW electrical, MAN E0836E engine, year of manufacture 2015, in use from Q1 2020, approx. 38,000 hours, manufacturer overhaul, regular full maintenance by the manufacturer, maintenance documentation available for inspection, fully functional, out of service since 10/12/2026. Current maintenance is pending. 2. Gas condensing boiler Wolf MGK-2-470 (~200 kW real load, max. 467 kW, approx. 11 years old), used as a peak load boiler. 3. Buffer tank approx. 8,000 liters (with insulation, approx. 11 years old). 4. Expansion tank Reflex Type N600 (600 liters): Lasdpfsz Tdfgjx Alyoh On request: Soundproof enclosure (multi-layer panels, steel frame, approx. 60 m², outdoor installation, supply/exhaust air).

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Lasdpfx Aozxqd Ijlyoh Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: repair required (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 30, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 2,050 rpm, total height: 2,000 mm, total width: 2,150 mm, total length: 2,500 mm, table length: 1,600 mm, overall weight: 3,900 kg, Equipment: documentation/manual, IMTI MU-50S Universal Milling Machine | Year of Manufacture 2015 | SK50 | 1,200 mm X-axis travel | requires repair We are selling a lightly used, heavy-duty, and robustly constructed IMTI MU-50S universal milling machine from 2015. Apart from the defect described below, it is in good technical condition, in our opinion. Visible signs of use are present. Technical data and equipment: • Travel distances X/Y/Z: 1,200 / 700 / 500 mm • Table size: 1,600 × 500 mm • Tool holder: SK50 • 3-axis digital display SINO SDS6-3V • Swiveling milling head • Machine weight: approx. 3,900 kg Known defect: When the spindle clamping mechanism is activated for tool changes, the Z-axis moves downwards. The same behavior occurs when the emergency stop is activated. The cause has not been fully investigated. The machine requires repair; the defect must be professionally rectified before normal operation. Terms of sale: Sale exclusively to entrepreneurs as defined in § 14 BGB (German Civil Code). The used machine is sold with exclusion of any warranty for defects. No guarantee regarding the condition is provided. The exclusion does not apply if a defect was fraudulently concealed or if a guarantee regarding the condition was given. Inspection possible by appointment. Ljdps Aay Nyjfx Alysah Collection and transport are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2019, operating hours: 31,800 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, feed rate X-axis: 42,000 m/min, feed rate Y-axis: 42,000 m/min, feed rate Z-axis: 42,000 m/min, controller manufacturer: Siemens, controller model: 840d, total height: 2,750 mm, total length: 2,850 mm, total width: 2,350 mm, rotational speed (max.): 20,000 rpm, overall weight: 7,500 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 13,300 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor,

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Lsdpfx Aloz Tf D Royeah Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: like new (used), Year of construction: 1994, functionality: fully functional, overall weight: 100 kg, total width: 500 mm, total length: 800 mm, total height: 1,200 mm, input voltage: 380 V, Equipment: emergency stop,

Condition: used, Year of construction: 2013, machine/vehicle number: FA59, Used automatic Tecmi shrink wrapper - 2013Technical Specifications & Performance DataThis automatic shrink wrapper is engineered for high-efficiency industrial packaging of PET bottles on a used bottling line. Manufactured by TECMI, the machine combines reliable mechanics with Siemens automation to deliver consistent bundle quality for beverage production and other industrial packaging applications. With a compact footprint and robust construction, it is well suited for second hand integration into existing packaging machinery layouts.Manufacturer: TECMIModel: EV 750 – 50 – TT 70-45 x3Year: 2013Production speed: 50–100 bundles/minute, (36.000 BPH on 3x2 format) Configured format: PET 380 ml x 6-packContainer types: PETElectrical data: 440 V, 60 HzWeight: 1300 kgOperating mode: AutomaticControl platform: Siemens PLC/HMIAdvanced Automation & Control SystemsThe shrink wrapper is managed by a Siemens PLC with an HMI interface, providing intuitive setup, recipe handling, and diagnostic visibility for operators. Automated film handling, sealing, and shrink processes enable stable performance across the specified speed range. Temperature control and sealing parameters can be fine-tuned to maintain seal integrity and pack appearance, supporting consistent quality under demanding beverage production schedules. Interlocked guarding and safety monitoring are integrated into the control system to protect operators and maintain uptime.Production Line Integration CapabilitiesDesigned for seamless integration into a used bottling line or as a standalone unit, this packaging machine supports infeed from upstream conveyors and discharge toward downstream case handling or palletizing systems. The configured setup is optimized for PET 380 ml bottles arranged in 6-packs with neutral film. The automation platform simplifies line synchronization and facilitates quick adjustments when coordinating with other bottling equipment such as fillers, labeling machines, and palletizers.Machine Condition & Maintenance HistoryThe machine is currently in storage. As a second hand unit, it has higher working hours compared to other available machines noted as having less than one year of use. Despite this, the Siemens-based control and industrial-grade build are designed for longevity, offering dependable performance when properly serviced and commissioned.Operational Performance & VersatilityTargeted at industrial packaging needs in beverage production, the unit runs neutral film and forms stable 6-pack bundles of PET bottles. Its speed envelope of 50–100 bundles per minute provides flexibility for varying line capacities and demand profiles. The machine’s automation and consistent sealing performance support repeatable packaging quality, minimizing rework and optimizing throughput on high-volume lines.Installation Requirements & Site PreparationPlan for adequate floor space based on the EV 750-50 layout and ensure clear access for film loading and maintenance. Electrical service must provide 440 V,... Lasdj Adyvnepfx Alyeh

Condition: used, Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 3016, film width: 780 mm, filling weight (max.): 20,000 g, filling weight (min.): 1,000 g, product height (min.): 100 mm, RADPAK RM-55AI bulk product packaging line – a complete installation For sale, a complete and fully functional bulk product packaging line for products such as: - pellets, - anthracite coal, - granulated fertilizers, - aggregates, - and other bulk materials. Ljdpfxjz T Ahms Alysah The machine enables the packaging of products into plastic bags weighing from 1 to 20 kg. It supports: - simple bags, - bags with a gusset, - bags with a top handle. The line consists of: - RADPAK RM-55AI packaging machine, - RW-04 weighing dispenser, - RC-50 take-off conveyor, - frame with an operating platform, - filling hopper with a bucket elevator, - dust extraction system (2 filters), - screw compressor, - compressed air storage tank, - compressed air dryer. Technical data Manufacturer: RADPAK Sp. z o.o., Włocławek Year of manufacture: 2018 Electrical power supply: 3 × 400 V AC + N + PE, 50 Hz Pneumatic power supply: 0.55–0.60 MPa Factory serial numbers: Packaging machine RM-55AI – no. 3016 Weighing dispenser RW-04 – no. 2093 Take-off conveyor RC-50 – no. 3018

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Model: TB-OH 9/2 400/3/50 Year: 2016 400V, 50Hz, 9.8kW, 15A Lajdpfxs Aaaqqj Alyjh Weight: 130 kg

Condition: excellent (used), Year of construction: 2010, Very well-maintained press brake from Darley. Type: EHP LS 50 15 12 CL Capacity: 1550 x 50 tons Lajdpfsz S H Easx Alysh New Delem DA69T control system Y1, Y2, X, R, Z1, and Z2 CNC controlled Hydraulic Wila New Standard top clamp Pneumatic Wila 13mm bottom clamp

Condition: used, Year of construction: 2013, spindle tunring speed 7.000 U/min weight of the machine ca. 9,8 t spindle hours ca. 48.437 h Number of working hours ca. 33.559 h Condition: used Accessories, tools, and clamping devices shown are included in the scope of delivery only if this is explicitly stated in the additional information. Technical data and specifications are subject to change and errors; subject to prior sale! Ljdpfx Ae Advfrelyeah

Condition: used, Year of construction: 2009, functionality: unexamined, power: 196 kW (266.49 HP), total height: 2,570 mm, total length: 3,500 mm, total width: 1,200 mm, 2G / WEIER Gas CHP – Engine/Generator Set Gas-powered combined heat and power plant from 2G. The unit is housed in a soundproof enclosure and features a gas control system, heating and engine circuits, and a heat exchanger. Unit/Engine: WEIER Type: GEN.DASGM 250/4L Year of manufacture: 2009 Voltage: 400 V Frequency: 50 Hz Ledpfxjzzbhpe Alyeah Rated current: 400 A Power: 196.0 kW Speed: 1,514 rpm Power factor: cos φ 0.86 Protection class: IP54 Insulation class: F Max. ambient temperature: 70 °C Max. operating pressure: 6 bar Marking: CE / EN 60034/05 Ignition system: Manufacturer: Altronic Inc. Type: CD200 – Programmable Ignition P/N: 791070-6 S/N: 3218 Supply: 12–24 V DC Max. ambient temperature: 105 °C Location: Neuenkirchen-Vörden, Germany An inspection of the unit is possible after prior arrangement. If you are interested or have any technical questions, please feel free to send us an inquiry. We will provide you with further information and documents upon request.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, spindle mount: MK 4, total width: 600 mm, total length: 1,135 mm, total height: 2,460 mm, table width: 600 mm, table length: 600 mm, overall weight: 950 kg, Equipment: documentation/manual, Continuous drilling capacity | steel 45 mm Maximum drilling capacity | steel 50 mm Maximum drilling capacity | cast iron 60 mm Maximum drilling depth 230 mm Thread cutting | steel M42 Thread cutting | cast iron M50 Overhang 375 mm Work table dimensions 600 × 600 mm Maximum table load 400 kg T-slots | slot size 18 mm Spindle taper MK4 Machine feed of the spindle 6 / 0.05 - 0.3 mm/rev Spindle speed 54 – 2090 rpm Continuously variable speed No Number of speed stages 18 Maximum distance between spindle and table 800 mm Maximum distance between spindle and base 1300 mm Column diameter 200 mm Base dimensions 600 × 520 mm Lodpfsz Rlkxsx Alyeah Power input 2400/3000W Electrical connection 400V Dimensions (W × H × D) 600 × 2460 × 1135 mm Weight 950 kg

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: Lodpfoy Ufk Rsx Alysah ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Amada Type: HFP 20 50 Capacity: 2050 x 50 tons Y1, Y2, X1, X1, R1, R2, Z1 and Z2 CNC controlled WILA NS hydraulic upper and lower clamping system Automatic Akas Fiessler safety system Year of manufacture: 2005 Laedo Aazxcjpfx Alyeh New computer in the control cabinet

Condition: good (used), Year of construction: 2023, Gear-driven drilling and milling machine GBFM 50 GAL Year of manufacture: 2023 Serial number: 03/C66 Drilling capacity: 50 mm Spindle travel: 180 mm Spindle taper: ISO 40 Speed range: 94-2,256 min-1 Lsdpfsz Tqx Tsx Alysah Weight: 2,000 kg

Condition: used, Year of construction: 2005, Used 2-meter CNC press brake from Amada Lasdpe Aaztmefx Alyoh Type: HFP 20 50 Capacity: 2050 x 50 tons Y1, Y2, X1, X1, R1, R2, Z1 and Z2 CNC controlled WILA NS hydraulic upper and lower clamping system Automatic Akas Fiessler safety system Year of manufacture: 2005 New computer in the control cabinet

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 86966, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840D, total height: 3,850 mm, total length: 8,350 mm, total width: 4,200 mm, overall weight: 35,000 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 4,000 rpm, spindle motor power: 57 W, spindle nose: SK50, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, For sale is an AXA VHC50-2600 XTS, including a KUKA robotic system with conveyor belts (partial sale possible). An spare parts package worth approximately €180,000 is also included. The price is including delivery to your location – within Germany. Ljdpoz S T Rcsfx Alyeah For more detailed technical specifications, please see the attached documents. An inspection can be arranged at any time. Installation and recommissioning can also be organized.

Year of construction: 2014, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: VR100-50, Distributor designed for spreading confectionery sprinkles onto an underlying conveyor belt. Spreading width: 1000mm, underlying belt speed: 4.5m/min. Capacity: 75kg/h, discharge weight: 0.7kg/l, volume approximately 150L. Layer thickness can be adjusted using a slide. Ledpfxo Aa I Abj Alyeah Made of stainless steel 304. See specifications for details.

Year of construction: 2020, condition: ready for operation (used), Offered is an extensive machinery package for textile processing, automatic cutting, laser cutting, industrial sewing, die cutting and riveting. 1) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow rate: 320m³/h. 2) Single-needle lockstitch flatbed sewing machine with triple feed and large vertical-axis hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 3) Single-needle high-speed lockstitch sewing machine Juki DDL-9000B-SS, year of manufacture: 2019, max. sewing speed: approx. 5000stitches/min, max. stitch length: approx. 5mm, needle bar stroke: approx. 30.7mm. 4) Single-needle high-speed lockstitch sewing machine Dürkopp Adler 261-140342-02, max. stitch length: approx. 5mm, control unit: AHE59. 5) Post-bed sewing machine Pfaff 591-900/81-BL. 6) 2 identical swing-arm cutting presses Moneus 1333. 7) 5-thread overlock sewing machine Chee Siang Golden Wheel CSK-2516D-03/S35-3x5. 8) Manually operated riveting and setting machine with mechanical foot actuation. Documentation available. Inspection possible by arrangement. Lodozt Skxopfx Alyjah

Condition: excellent (used), Year of construction: 2021, 30-watt CO2 laser Working area: 457 x 30 mm Engraving and cutting of wood, paper, rubber, acrylic, etc. Exhaust system: Atmos Cube PC: HP ProDesk 400G7 Small Form Factor PC Includes monitor, keyboard, and mouse. Software: RayJetManager pre-installed. Ledpfx Aljz Suruoyeah

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Lajdez An S Ropfx Alyoh Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.

Year of construction: 1990, condition: ready for operation (used), LIQUIDATION SALE – IMMEDIATE AVAILABILITY Due to the closure of the production facility, we are offering for sale a HÄNDLE mixer and extrusion press, used in a ceramic production line. Price for the mixer and press: EUR 120,000 net, EXW, negotiable. Reasonable offers will be considered. Preference will be given to buyers who can complete the transaction and collect the equipment quickly. Equipment offered: HÄNDLE MDVG 920 B mixer, manufactured in 1990, weight 6,000 kg, power 30 kW HÄNDLE PZG 56 A/50 extrusion press, manufactured in 1990, weight 7,200 kg, power 90 kW, serial no. PZ 3098 Included: control cabinet Ledpfx Asz Sbw Sjlyjah two press heads with outlets: 24 × 39 and 32 × 45 The machines were fully operational until the plant shut down in December 2025. Wear parts (press screws, mixer paddles) were replaced in March 2025 and are in good condition. The equipment is characterized by robust construction, durability, and straightforward maintenance. It is available for inspection at the plant in Panoszów, Poland. The machines are available immediately. Quick completion of the transaction and prompt collection are preferred. Additional technical information and photographs are available upon request.

Condition: excellent (used), Year of construction: 2013, Engel Victory 80/50 Spex with sprue picker Engel ER-USP5 / Hybrid machine Year of manufacture: 2013 Injection unit: Lajdpfx Asz Iqn Nelyjh Screw diameter: 18 mm Injection weight: approx. 22 g Injection pressure: 2200 bar Dosing volume: 25 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 0x0 mm Size of clamping plates: 500x450 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 2 Control system with hot runner system x 6 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving It is possible to change the screw diameter to 22 or 25 mm Purchase of the sprue picker at an additional cost Dimensions: Weight: 2900 kg Length/Width/Height: 3.30x1.60x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request