Used Landrol Lr 160 for sale (6,582)

Condition: new, Year of construction: 2020, Condition: New Iisdpfjx I E Iiox An Dea Year of construction: 2020

Condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler Isdpeyzn Dtofx An Deia -Heat exchanger: Oil cooler, shell and tube heat exchanger -Connections/Dimensions: see photos -Dimensions: 1005/1600/H110 mm -Weight: 13.5 kg

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,028 mm, total width: 1,000 mm, Tested forklift battery for your forklift truck - 80V 6PZS 930Ah - DIN A + 1 year warranty + Includes Aquamatik water refilling system + Includes end cell connectors & REMA 320 plug (other plug types can be fitted if required) + Capacity: min. 90-100% (C5 capacity test protocol will be provided on delivery) + Year of manufacture: 2024 Dimensions: Length 1,028 mm Width 1,000 mm Height 784 mm Weight: approx. 2,240 kg Suitable for the following models, among others: Linde E 100 / 600 - 1471-00 Linde E 120 / 1200 - 1471-00 Linde E 120 / 600 - 1471-00 Linde E 140 / 1200 - 1471-00 Linde E 140 / 600 - 1471-00 Linde E 150 / 1200 - 1471-00 Linde E 150 / 600 - 1471-00 Linde E 16 - 386-02 - side battery change Linde E 160 / 1200 - 1471-00 Linde E 160 / 600 - 1471-00 Linde E 180 / 600 - 1471-00 Linde E 180 / 900 - 1471-00 Linde E 35 / 600 L - 388-00 Linde E 40 - 388-00 Linde E 40 / 600 HL - 1254-01 Linde E 40 / 600 HL - 388-00 Linde E 40 / 600 L - 388-00 Linde E 40 HL - 388-00 Linde E 45 / 600 HL - 1254-01 Linde E 45 / 600 HL - 388-00 Linde E 45 / 600 HL - 388-00 - side battery change Linde E 45 / 600 L - 388-00 Linde E 45 HL - 388-00 Linde E 50 - 388-00 Linde E 50 / 600 HL - 1254-01 Linde E 50 / 600 HL - 388-00 Linde E 50 / 600 L - 388-00 Linde E 50 HL - 1254-01 Linde E 50 HL - 388-00 Linde E 50 L - 388-00 Linde E100 / 1200 - 1471-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde P 250 - 127-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 L - 127-05 Linde P 250 LWB - 5007-10 - side battery change Linde P 250 LWB - 5007-10 - vertical battery change Linde P 350 - 5007-10 - side battery change Still MX-X Still R 60-40 Still R 60-45 Still RX 60-40 Still RX 60-50 Jungheinrich EFG Jungheinrich EFG 540 Jungheinrich EFG 550 Jungheinrich EFG VAC 35 Jungheinrich EKX 515 Jungheinrich EKX 516 Toyota 7FBMF45 Crown TSP 6000-D Crown TSP 7000 Iiedpowzvw Uefx An Doa Mitsubishi FB45-2 OM-Pimespo-Fiat XE 50 Steinbock-Boss WA 15 Other common battery sizes available on request. Transport available.

Condition: used, mileage: 10 km, power: 120 kW (163.15 HP), first registration: 06/2024, fuel type: diesel, color: black, gearing type: automatic, emission class: euro6, number of seats: 6, total length: 7,004 mm, total width: 2,427 mm, total height: 2,321 mm, loading space length: 3,500 mm, loading space width: 2,040 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * 4-year factory warranty* * Hill start assist * Exhaust concept, EURO VI-E * Trailer hitch, rigid (incl. tow bar) * Airbag for driver and front passenger with front passenger airbag deactivation * Roof gallery with storage compartments, two 1-DIN slots and reading light * Sun visors, folding and swivel to the side * Exterior mirrors, electrically adjustable, heated and folding * Exterior mirrors left & right, convex, with integrated LED blinker light and wide-angle range * Rear-wheel drive, single tires * Emergency Brake Assist (for distance-controlled cruise control ACC up to 160 km/h) * 520 A (92 Ah) battery * Rubber floor in the cab * Electronic stabilization program (ESP) and ABS with electric differential lock * Operating license supplement C42 * 4-seater bench seat in the 2nd row of seats * USB dual function module 45W * Daytime running lights with driving light control (automatic), "Leaving home" and manual "Coming home" function * Distance-controlled cruise control (ACC) with speed limiter and stop function * 8-speed automatic transmission * Glove compartment with lockable flap, illuminated * Climatronic air conditioning in the cab * LED main headlights with LED daytime running lights * Safety interior mirror, dimmable * Chassis with crew cab * Standard air conditioning zones * Without refrigerant compressor / without preparation * Reversing camera preparation * "Light Assist" high beam assistant * Multifunction leather steering wheel (3-spoke), heated * 4 loudspeakers: 2 tweeters, 2 woofers * "Plus" multifunction display * Fatigue detection * Wired & Wireless App-Connect * 2.0 l/120 KW (4V) BIT, common rail basic engine is:TP3/TV4/TP5/TK4 * Diesel fuel system * Standard navigation system with Media and Internet package * Front fog lights incl. cornering lights * Online service, with OCU, with head unit coding, without WFS network * Flatbed floor, aluminum drop sides (fold-down), lashing eyes, steps * Position lights on the roof, front * 4 steel wheels 6 1/2 J x 16, in black * MAN Media Van Business * 12 V socket and 2 cup holders in the instrument panel * 4 diesel engines 2.0L Aggr. 03N.H * All-season tires * Long wheelbase 4,490 mm * Three-point automatic safety belts with belt height adjustment and electric belt tensioners at the front * Side windows front and rear and rear windows in heat-insulating glass * 12 V sockets in the cab * Swivel seat "ergoActive" on the left * "Comfort Plus" seat on the right * Seatbelt monitoring, e-contact in seatbelt buckle, extended safety equipment * Seat covers in "Toronto Grid" fabric * Seat heating, can be regulated separately * Side marker lights * Approval as 3.5t * Start-stop system with brake energy recovery * Intermittent windshield wipers with light and rain sensor * Central locking with radio remote control and interior operation * Step lighting * Digital radio reception (DAB+) * Front ladder rack preparation * Reinforced front axle (2,100 kg load capacity) * Cell phone interface * Laminated glass windshield with heat-insulating glazing, heatable * Permissible total weight 3,500 kg * Auxiliary water heater, programmable, with radio remote control * Wide end beam with L = 1,899 mm and H = 258 mm, bolted * Approval as a truck with N1 approval * Front disc brakes, 16" Iiedpfsva T Naox An Dja * With voice control * Painted front ladder rack including bulkhead protection grille * Sun protection film on the windows, deep black tinting in t

Condition: ready for operation (used), Festo 556824 / EGC-HD-160-1650-TB-0H-GK toothed belt axis, SN: 3S7PLRPQJ2C, used, in good condition, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Iedpfxex Erlis An Dsia

Condition: used, mileage: 10 km, power: 120 kW (163.15 HP), first registration: 06/2024, fuel type: diesel, color: black, gearing type: automatic, emission class: euro6, number of seats: 6, total length: 7,004 mm, total width: 2,427 mm, total height: 2,321 mm, loading space length: 3,500 mm, loading space width: 2,040 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * 4-year factory warranty * 18-inch TWIN-MONOTUBE-PROJEKT rims black matt * Tires: GENERAL GR-AT3 255/60 R18 * Hill start assist * Exhaust concept, EURO VI-E * Trailer hitch, rigid (incl. tow bar) * Airbag for driver and front passenger with front passenger airbag deactivation * Roof gallery with storage compartments, two 1-DIN slots and reading light * Sun visors, folding and swivel to the side * Exterior mirrors, electrically adjustable, heated and folding * Exterior mirrors left & right, convex, with integrated LED blinker light and wide-angle range * Rear-wheel drive, single tires * Emergency Brake Assist (for distance-controlled cruise control ACC up to 160 km/h) * 520 A (92 Ah) battery * Rubber floor in the cab * Electronic stabilization program (ESP) and ABS with electric differential lock * Operating license supplement C42 * 4-seater bench seat in the 2nd row of seats * USB dual function module 45W * Daytime running lights with driving light control (automatic), "Leaving home" and manual "Coming home" function * Distance-controlled cruise control (ACC) with speed limiter and stop function * 8-speed automatic transmission * Glove compartment with lockable flap, illuminated * Climatronic air conditioning in the cab * LED main headlights with LED daytime running lights * Safety interior mirror, dimmable * Chassis with crew cab * Standard air conditioning zones * Without refrigerant compressor / without preparation * Reversing camera preparation * "Light Assist" high beam assistant * Multifunction leather steering wheel (3-spoke), heated * 4 loudspeakers: 2 tweeters, 2 woofers * "Plus" multifunction display * Fatigue detection * Wired & Wireless App-Connect * 2.0 l/120 KW (4V) BIT, common rail basic engine is:TP3/TV4/TP5/TK4 * Diesel fuel system * Standard navigation system with Media and Internet package * Front fog lights incl. cornering lights * Online service, with OCU, with head unit coding, without WFS network * Flatbed floor, aluminum drop sides (fold-down), lashing eyes, steps * Position lights on the roof, front * 4 steel wheels 6 1/2 J x 16, in black * MAN Media Van Business * 12 V socket and 2 cup holders in the instrument panel * 4 diesel engines 2.0L Aggr. 03N.H * Long wheelbase 4,490 mm * Three-point automatic safety belts with belt height adjustment and electric belt tensioners at the front * Side windows front and rear and rear windows in heat-insulating glass * 12 V sockets in the cab * "ergoActive" swivel seat on the left * "Comfort Plus" seat on the right * Seatbelt monitoring, e-contact in seatbelt buckle, extended safety equipment * Seat covers in "Toronto Grid" fabric * Seat heating, can be regulated separately * Side marker lights Iodpfopfdltox An Deia * Approval as 3.5t * Start-stop system with brake energy recovery * Intermittent windshield wipers with light and rain sensor * Central locking with radio remote control and interior operation * Step lighting * Digital radio reception (DAB+) * Front ladder rack preparation * Reinforced front axle (2,100 kg load capacity) * Cell phone interface * Laminated glass windshield with heat-insulating glazing, heatable * Permissible total weight 3,500 kg * Auxiliary water heater, programmable, with radio remote control * Wide end beam design with L = 1,899 mm and H = 258 mm, bolted * Approval as a truck with N1 approval * Front disc brakes, 16" * With voice control * Painted front ladder rack including bulkhead protectio

Year of construction: 2021, condition: new, Air cleaner for room air purification for aerosols, such as viruses, bacteria, pollen, dusts. ISI AIR CLEANER - adjustable up to 1600 m³/h - 230 V - for large rooms up to 160 m³ Air output: adjustable up to 1600 m³/h Room size: suitable up to 160 m³ Power: 69 - 209 W Operating voltage: 230V 50/60Hz, 5m connection cable with Schuko plug (EU4) (plug & play) Noise level*: 38.2 - 48.1 db(A 1 m) Dimensions L/W/H in mm: L 550 / W 660 /H 2000 Colour: Lower part: RAL 7016, upper part RAL 7035 Weight: 130 kg Manu´facturer: ISI: Industrieprodukte Scope of delivery: 1 piece ISI AIRCLEANER FT1 1 piece Fine dust filter, ISO 16080 ePM1-90% 1 piece HEPA filter H14, EN1822 Delivery: ex works Buchholz (Westerwald) excluding packaging, directly available The application: Currently, air purifiers are only becoming known because of the Corona pandemic. In principle, air purifiers are also recommended outside of a pandemic. They can significantly improve air quality. Even after the pandemic, there are seasonal pathogens circulating, such as influenza in the colder months. Asthmatics and allergy sufferers benefit from the filtration of pollen and other allergens year-round from an air purifier. How it works: The room air is sucked in at the bottom of the filter unit. In the pre-filter area, the air is freed from dust and larger particles. A subsequent, highly effective HEPA H14 filter system removes 99.995% of particles or aerosols, which may contain pathogens, from the air. Your advantages: - Highly efficient EC fan as standard - Adjustable speed and air output - Long service life and easy filter change Iodpfxjh Rfcns An Doia - Low noise level - Separation efficiency of up to 99.95 - Quality Made in Germany

Condition: excellent (used), Catalogue number 7259 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 200 mm - Shaft width: 530 mm - Shaft diameter: 550 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 50x50 mm - 2 lower toothed feed shafts - Lower shaft motor: 2.2 kW - Upper toothed feed shaft - Upper shaft motor: 2.2 kW - Conveyor belt feeder: 0.55 kW - Feeder belt length: 3000 mm Iodpfeyka E Tox An Deia - Feeder belt width: 410 mm - Main motor: 45 kW - Auto-reverse - Reverse operation - Machine dimensions (L/W/H): 2900x1600x1600 mm - Feeder dimensions (L/W/H): 3070x720x670 mm - Weight approx. 3500 kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – Reverse function – Used shredder in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on exchange rate 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL DATA - Feed opening width: 720 mm - Feed opening height: 160 mm - Thickness of material to be shredded: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Entry pressure feed roller: 0.75 kW - Bottom gear-driven feed roller: 1.8 kW - Top gear-driven feed roller: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW Iijdeyz In Eopfx An Doa - Main motor: 55 kW - Autoreverse - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German-made – Very low hours of use – Original documentation - Autoreverse (adjustable) – Used shredder, in very good / excellent condition Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake Iodeywdr Espfx An Djia – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level Iiedjyxdwdjpfx An Dsa • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry Iedox D E Dyepfx An Dsia • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener. Ijdju D Dhxopfx An Dsia

Condition: not inspected (used), Manufacturer: Stork Capacity: 660 m3/h Ijdem Uc R Uepfx An Djia Engine: 160 kW

Condition: excellent (used), Year of construction: 1995, FLUIDPROGRESS mobile hydraulic power supply unit 1.6dm3/min 160bar Type: 25TE1.6 160/JD 24V Year of construction approx. 1995 Nominal operating pressure: 120 bar three section system. Operating pressure: max 160 bar Flow rate: approx. 1.6 dm3/min. Tank capacity: 200 liters Engine power: 0.75 kW Mains connection: 380 volts, 50 Hz Iiedji Dnpxepfx An Doa Electric hydraulic valve ATOS ORSTA hydraulics Space requirements Length: 1020 mm, width: 610 mm, height: 1000 mm Own weight: approx. 250 kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2007, condition: as good as new (ex-display), new Cuenod C 120/160 GX507 industrial gas burner is available for sale Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Minimum power 230 kW Ijdpfjd Aqqzox An Deia The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level of emissions. • The specially designed head contains nitrogen oxides below 80 mg / kWh. • Very low noise level (closed ventilation system). • Ventilation with the RHP® system to optimize the combustion process. • Cubic design with transverse fan. • Shunt for measuring the ionisation current. • AGP® system that provides the perfect air-to-gas ratio, CO2 High during the work cycle and to precisely control the flow of excess air required for optimum operating condensing boilers with maximum efficiency. The net price of commercial customers of EU customers If you need more information. Here we are to help! Please contact us at the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Technical data for pallet rack beam: Racking system: Jung Heinrich Type: MPB Iodpex Hpgyofx An Dsia Scope of delivery includes: 01x pallet rack beam, new Material color: hot-dip galvanized Box profile: 160 x 50 x 1.75 mm Beam type: AUF'B'E0436 Connector: 4 HK (hooks) Clear span: 3,400 mm 02x safety pins, used Design: fully galvanized For securing the longitudinal beams Against unintentional lifting out Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Should you require transport or shipment of this item, additional costs will apply, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical Specifications for Pallet Rack Beam: Racking System: Polypal Type: Stockpal Scope of Delivery Includes: 01x Pallet Rack Beam, used Material color: blue Box profile: 160 x 50 mm Type: SKVBN 16250CP33 Connector: 2 HK (hooks) Clear Span: 4,610 mm Weight per unit: approx. 39.75 kg Max. load per pair of beams: 2,000 kg, with evenly distributed load 02x Safety Pins, used Design: fully galvanized For securing the beams Prevents unintentional lifting out Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Iiodpjwlhapsfx An Dea General Information about this Item: This item is only offered for collection. Transport or shipping beyond this is subject to additional costs, which can be inquired from us separately depending on the place of delivery and the volume of the order.

Condition: good (used), Your contact person in our home: Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you a used pallet rack beam the manufacturer Redirack for sale at. Technical specifications of the pallet shelf traverse: Shelf system: Redirack Iodpfx Aodyqg Esn Dsia Included in the scope of delivery: 01 x pallet shelf beams, used Material color: orange Box profile: 160 x 50 mm Clearance: 3,610 mm maximum load per pair of traverse 3,500 kg, at gleichm. distributed load 02 x used locking pins, Execution: compl. zinc-plated To secure the beam against unintentional lifting Our services at a glance: (Prices on request) Installation, construction our general conditions of erection are to be observed Shelf testing Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelf systems Delivery with our own fleet of vehicles (without discharge)

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Iedpfx Anjw Rqwto Djia

Condition: new, Year of construction: 2025, Flowpack machine with higher cycles rate, film feeding from the top. Designed for smaller products. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. "No product - no bag" function. - Specifications: max. speed of the machine in neutral: 200 cycles/min; bag dimensions (not product dimensions): L(50-unlimited)xW(50-165)xH(3-55)mm, note W+H max. 165mm; suitable film width max.: 350mm; suitable film thickness: 30-80µm; number of knives: 2 pcs; end sealing: rotary; number of servo motors: 3 (feeding, longitudinal and end sealing); standard machine housing: painted steel; parts in contact with product: stainless steel 304; power supply: 220V, 1-phase, 50Hz; rated power: 3.8kW; dimensions of the machine (LxWxH): 3900×850×1500mm; weight: 600kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iodev Nlf Ejpfx An Dsia

Condition: new, Year of construction: 2025, Economical flow wrapper for smaller products, top loader. Conveyor belt, longitudinal and end sealing servo driven, PLC controlled, operation via touch screen. "No product - no bag" function. - Specifications: max. speed of the machine in neutral: 100 cycles/min; bag dimensions (not product dimensions): L(50-unlimited)xW(50-165)xH(3-60)mm, note W+H max. 165mm; suitable film width max.: 350mm; suitable film thickness: 30-80µm; number of knives: 1 pcs; end sealing: rotary; number of servo motors: 3 (feeding, longitudinal and end sealing); standard machine housing: painted steel; parts in contact with product: stainless steel 304; power supply: 220V, 1-phase, 50Hz; rated power: 3.8kW; dimensions of the machine (LxWxH): 3900×850×1500mm; weight: 600kg. Iisdpfxsv Nlfxj An Dja Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 1995, condition: excellent (used), REIFENHÄUSER RAM 160 PIPE HITCH - 6 Caterpillars Year of manufacture: Approx. 1990 Caterpillars: 6 Diameter: Min. 30 mm, Max. 160 mm Haul-off speed: 0.2 - 10 m/min With central chain lubrication Renewed gear motor and frequency converter With remote control and approx. 10 m cable Condition: Very good, ready for operation The haul-off is my property We speak Spanish We speak French We speak English Iiedpfx Anowq E Eto Dja Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,546 h, functionality: fully functional, turning length: 284 mm, turning diameter: 300 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, controller model: Fanuc Oi-TD, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. turning length: 284 mm Swing diameter over bed: 550 mm Chuck diameter: 210 mm Bar capacity: 51 mm Spindle nose: A2-6 Main spindle max. speed: 4,500 rpm Spindle bore: 62 mm Spindle bearing diameter: 100 mm Main spindle drive power: 11 / 7.5 kW Travel - X axis: 170 mm Travel - Z axis: 335 mm Number of tool stations: 12 positions Tool size: Ø25 x Ø40 mm Rapid traverse (X / Z): 36 / 36 m/min Quill diameter: 60 mm Quill stroke: 80 mm Tailstock taper: MT 4 MACHINE DETAILS Control: Fanuc Oi-TD Total power requirement: 25 kVA Dimensions & weight Installation space approx.: 8.5 x 2.5 x 2.0 m Machine weight approx.: 3.2 t Operating hours Control on-time: approx. 26,932 h Cutting hours: approx. 7,546 h EQUIPMENT Documentation Chip conveyor Coolant unit Tailstock Parts catcher Signal lamp Hydraulic unit Three-jaw chuck SEOAM CAH-08 Collet chuck HAINBUCH nova size 65 Tool setting device Interface for bar feeder Bar loading magazine Breuning SIMAG 70.1-3000 Iodpfx Aoyxmmujn Dsia Various tool holders

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: M034362CAFG, turning length: 209 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, turning diameter over bed slide: 550 mm, controller model: FANUC SERIES 0i-TD, No reserve price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the machine within the specified periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter over bed: 550 mm Maximum turning length: 209 mm Travel distance X-axis: 100 mm Travel distance Z-axis: 300 mm Spindle bore: 62 mm Rotational speed of driven tools: 5,000 rpm Spindle speed: 4,500 rpm Maximum bar diameter: 51 mm Feed rate X-axis: 170 mm/min Feed rate Z-axis: 335 mm/min Rapid traverse (X and Z axis): 36 m/min Tailstock quill diameter: 60 mm MACHINE DETAILS Control: FANUC SERIES 0i-TD Operating voltage: 400 V Frequency: 50 Hz Rated current: 75 A Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,000 x 2,200 mm Weight: 4,000 kg EQUIPMENT 12-position tool changer Iedpeyng Nmefx An Djia Driven tool stations Chip conveyor External reference: Elos - Lot 15