Used Leistritz 59692 001 L3Mf 45/117 Pumpe Mit Emk Kf160M2-2-Ptc Motor for sale (95,555)

Condition: ready for operation (used), Leistritz 59692 001 L3MF 45/117 pump with EMK KF160M2-2-PTC motor, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Dcedok Axb Rspfx Ai Son

Condition: ready for operation (used), Brinkmann SFL1150/330-CM3+1841 pump with motor SN:1116020423 - 41314/2-IP 55F, used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dcodpfxot Sbmgj Ai Sjn

Condition: ready for operation (used), Leistritz 59692 002 Motor SN L3MF 32/83,used, strong traces of use, 100% functional, scope of delivery according to photos Djdpfx Aslx N Tzji Socn

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Dsdpfx Aeyq Rdysi Sjcn Please arrange appointments or submit offers via email, not by phone.

Condition: ready for operation (used), Schmalenberger ZHT02 32-08/2 (50Hz) SN: 2018005883/20 with ATB CNF 90L/2D-11S+E3 / 1710 motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dsdpozpcwuefx Ai Socn

Condition: ready for operation (used), Siemens 1FT5102-0AC71-2 - Z motor SN: E1W68186402001 with 1FU1050-6GC, 20.0 m/min, used, in good condition, 100% functional, scope of delivery as per photos. Dcsdpsy Sdtlsfx Ai Sen

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 199107, Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 720S 3200-2100 Control unit: Selogica Year of manufacture: 2005 Special feature/Condition Pump was changed new hydraulic motor in 2019 injection unit sealed in 2019 constant maintenance by the manufacturer and previous owner Extras 2 x core pull robot interface machine data sheet is available on request Dodpelc R Rxsfx Ai Sjcn - complete documentation and software available - German language - from first owner - origin Germany clamping unit clamping force: 3200 kN /320 to. tie bar distance: 720 x 720 mm platen size h: 1040 mm x 1040 mm Installation height min.: 300 mm Installation height max.: 700 mm platen distance max.: 1400 mm opening stroke: 700 mm ejector stroke: 250 mm Ejector force: 100 kN centering moving platen D: 165 mm centering fixed platen D: 165 mm mold weight: 3600 kg Injection unit screw diameter: 70 mm injection weight in polysterol: 984 g/PS available immediately from our warehouse in Hanover/German or free domicile against freight reimbursement the machine is offered functionally tested the machine is in our sole ownership the requested machine is available immediately in our warehouse Hannover and is offered functionally tested and can be inspected under power.

Condition: new, Lowara SVI3303-04S75T/D pump - 10454125DYXWXLG with PLM132B5 / 375 motor, unused, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dcsdpfxomuh Hlj Ai Son

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -2x engines Perske -Motor type: KNS 70 12/2 -Power: 3/4.4 kW -Voltage: 220/380/380 volts Dsdjb Uhrdjpfx Ai Secn -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Number: 2x premilling units available -Price: per piece -Dimensions: 1120/1100/H1340 mm -Weight: 530 kg

Condition: ready for operation (used), Mitsubishi HD80-11SP DC servo motor SN: N77805021 with Sanyo Denki RST-5XC-11P mounting SN: 021122010D, used, in good condition, 100% functional, scope of delivery as per photos Dcedpfow E Uxrjx Ai Sen

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -2x engines Perske -Motor 1 type: KNS 71.16/201 -Power: 4.4/6.6 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5870 rpm -Motor 2 type: MP-10-L Dcjdob Uhi Njpfx Ai Son -Power: 1.0/1.5 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 3000/6000 rpm -Other engines with other services in stock for an additional charge -Number: 1x joint milling units available -Price: per piece -Dimensions: 900/1000/H1030 mm -Weight: 360 kg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Dcodpfxjz I Egge Ai Ssn Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Condition: new, Knoll TG50-42/55480 centrifugal pump, 200523114, serial number: 268828, with AM 112M BA2 motor, serial number: 424615, unused, 100% functional. Scope of delivery as shown in the photos. ATTENTION: Please request separate quotes for packaging and shipping costs! Dodszh Scqjpfx Ai Secn

Condition: ready for operation (used), Knoll TSK40-21/30558 pump, part number 200511775, serial number 271359, with AM 100L AA2 motor, serial number 491439, used, in like-new condition, 100% functional. Scope of supply as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Dsdpfx Aezpcwhei Socn

Condition: new, The engine is new, unused, and comes from stock. In very good condition, ready for operation. Technical data Manufacturer: EMK Model: KAE2A132M 4B3E2K Power: 7.5 kW Rotational speed: 1455 rpm Voltage: 400 / 690 V Frequency: 50 Hz Efficiency class: IE2 Dodjyv R Nnopfx Ai Secn Protection rating: IP55 Duty type: S1 Insulation class: F Design: IM B3 Weight: approximately 54 kg

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 14,913 h, load capacity: 4,500 kg, lifting height: 4,500 mm, fuel type: electric, mast type: simplex, construction height: 3,020 mm, fork carriage width: 1,250 mm, fork length: 1,150 mm, empty load weight: 7,990 kg, total length: 3,000 mm, drive type: Elektro, construction width: 1,450 mm, Electric 4-wheel forklift Load center: 500 ISO class: FEM 3 A Mast type: Standard Transmission: AC Technical condition: good Front tire type: Superelastic Dcedpfx Aisz Ifzqj Ssn Front tire size: 2 x 355/45-15 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 21x8-9 Rear tire condition: 0 - 20% Battery voltage: 80V Battery capacity: 1032Ah Battery year of manufacture: 2017 Double auxiliary hydraulics, double pallet fork, cabin with heater, battery, lighting according to StVZO (German Road Traffic Licensing Regulations), 2 work lights at the front.

Condition: ready for operation (used), Siemens 1FT6136-6SF71-8EL7 synchronous servomotor SN YF B427167105001 + 2CW8366 blower, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please enquire about the price separately! NOTE: Please request costs for packaging and shipping separately! Dcodjx Duxmepfx Ai Sjn

Condition: excellent (used), For sale: SEW-EURODRIVE WA20 DR63L4 geared motor with a three-phase electric motor. Dcodpfx Asznuqqji Son The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good. Normal signs of wear and tear resulting from use are visible. Thanks to its robust construction, the geared motor is ideal for driving conveyors, feeders, production machines, and other industrial equipment. Technical data: Manufacturer: SEW-EURODRIVE Gearbox type: WA20 Motor type: DR63L4 Power: 0.25 kW Power supply: 3×220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1300 rpm Output speed: 27 rpm Gear ratio: i = 48.00 Output torque: 45 Nm Protection class: IP54 Insulation class: B Operating mode: S1 Weight: 8.8 kg

Condition: new, Knoll TG50-42/55480 pump, serial number 200921578, SN: 413462, with AM 112M BA2 engine, serial number: 644637, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Dcodpfxozh Scwe Ai Son

Condition: ready for operation (used), ATB Motor - 400V / 2860 RPM / 11 A - IP54 / 50Hz with pump - Length: 127 cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dcsdpfx Aierwtmzo Ssn

Condition: ready for operation (used), ATB Motor - 400V / 2840 RPM / 6,4 / 11 A - IP54 / 50Hz with pump - Length: 120 cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dedortirzopfx Ai Sscn

Condition: new, Grundfos CRN3-19 A-P-G-V-HUBV pump with motor, unused but with signs of storage, 100% functional, scope of delivery as shown in the photos. Dodpezkxhfjfx Ai Secn

Condition: ready for operation (used), Serfilco EO 1 1/4CL5-DM1.0-DPA-ST-SX with VEM K21R 80 K 2 DOD FDS-SR/5334 motor, height 370 mm + motor 235 mm, top plate 355 x 250 mm, outer diameter of drain outlet 59 mm, used, in good condition, 100% functional. Dcedpfx Aoi D N Nhei Sjn

Condition: used, Year of construction: 2015, CNC laser cutting system, fiber laser 3kW Manufacturer: Microstep Type: FIBERLAS MSF 4001.20BL Year of manufacture: 2015 With drilling unit + tool changer Complete system consisting of: - Cutting system, - IPG fiber laser source, - HIGHYAG cutting head, and - KEMPER extraction system. Laser IPG Ytterblum Laser System YLS-3000-CUT-Y14 Djdpfx Ajzhtp Eei Sjcn Rated power: 3,000 W (3kW) Operating mode: CW / modulated Power consumption: approx. 9 kW max. (8.3 kW typical) at 3,000 W IPG air-water chiller for cooling Operating hours: approx. 26,819 h Dimensions: W/D/H: 1,004 x 804 x 556 mm Cutting head II-VI HIGHYAG BIMO-FSC Permissible laser power: up to 4 kW Focal length f: 150 mm (focusing module 1.5) Focus diameter: approx. 300 µm with 200 µm optical fiber Weight: approx. 6.2 kg Extraction system KEMPER SYSTEM 8000 Extraction capacity: 5,000 m³/h Filter area: 50 m² Filter: KEMPER KemTex ePTFE membrane filter Certification: IFA-tested, welding fume class W3 (high-alloy steels) Availability from 10/2026 Reference No.: C2177 51026ä

Condition: new, Siemens 1FT5064-0AG71-2 - Z permanent magnet motor SN: EF861126002016 with encoder system - ROD 320.002, Z = see nameplate, unused in opened original packaging, 100% functional, scope of delivery as per photos Djdpotuhy Hofx Ai Socn