Used Metaltech Mammut Pbn 18 R for sale (71,686)

Condition: used, Year of construction: 2022, _____For sale on behalf of a customer: Metaltech Mammut Halfpipe Tipper PBN 18 R Lightly used, being sold due to replacement with a new unit - Permissible technical payload: 18,000 kg - Unladen weight: approx. 6,000 kg (depending on configuration) - Permissible total weight: 21,000 kg - Loading volume: 10 m³ - 40 km/h - Hydraulic support leg - Tyres: 650/55 R26.5 Dimensions: Length: approx. 6,500 mm; Width: approx. 2,400 mm; Height: approx. 2,600 mm. Storage location: not specified Hjdpfx Aow Ibbwjfher

Condition: new, maximum load weight: 43,929 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 16,690 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low Loader, Telescopic with Wheel Recesses (NEW) ----Equipment & Highlights Technology & Construction: - Extendable low loader with wheel recesses - Overall length: 13,190 mm, platform: 9,240 mm + 3,500 mm extension - Platform height: only 875 mm for low loading height - Total width: 2,550 mm + 600 mm extension - Unladen weight: approx. 14,071 kg - Gross vehicle weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles: - 4 BPW axles, front 2 fixed, rear 2 self-steering - Lift axle (automatic + manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS - WABCO Smartboard (axle load, suspension, diagnostics) - 16x tyres 245/70 R17.5 (M+S + 3PMSF) - Tyre pressure monitoring according to R141 Ramps & Loading Area: - Foldable 40-ton ramps - Ramp length: 2,750 mm, width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + steel chequer plate over wheel arches - Wheel recesses + covering bridges included - Digger arm recess at rear Load Securing: - Extensive lashing points: - 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN on gooseneck - 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on platform - 8,000–10,000 daN on outer frame/wheel recess area - 5×2 stake pockets, removable stanchions 50×100 mm - Container locks for 1×20 ft or 1×30 ft containers Equipment & Comfort: Hodpfxsx Efzne Afhor - 1× tool box (700×400×360 mm) - Stanchion box - Beacon light - LED side lighting, LED work lights - Wheel chocks - Width marker boards with LED - Standard 2" kingpin - Metallized chassis (Zn/Al 85/15) – high corrosion protection - Colour: RAL 9005 Black ----Special features: - New & immediately available - High payload, extremely flexible application - Perfect for machinery transport, construction equipment, vehicles, etc. - Very robust construction, high-quality BPW components For further information, we are at your disposal.

Condition: new, maximum load weight: 43,929 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 16,690 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low-Loader Extendable with Wheel Wells (NEW) ---- Equipment & Highlights Technology & Construction - Extendable low-loader trailer with wheel wells - Overall length: 13,190 mm; platform: 9,240 mm + 3,500 mm extension - Platform height only 875 mm for a low loading height - Total width: 2,550 mm + 600 mm extension - Unladen weight approx. 14,071 kg - Perm. total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Hodpfx Afex Ix Rqshsr Chassis & Axles - 4 BPW axles: front 2 rigid, rear 2 self-steering axles - Lift axle (automatic + manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS - WABCO Smartboard (axle load, suspension, diagnostics) - 16x tires 245/70 R17.5 (M+S + 3PMSF) - Tire pressure monitoring system per R141 Ramps & Loading Area - Foldable 40-ton ramps - Ramp length 2,750 mm, width 850 mm - Hydraulic sliding system - 45 mm hardwood floor + steel chequer plate over wheel arches - Wheel wells and bridging plates included - Excavator arm recess at the rear Load Securing - Extensive lashing points: - 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN at the gooseneck - 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on the platform - 8,000–10,000 daN at the outer frame / wheel well area - 5×2 stake pockets, detachable stakes 50×100 mm - Container locks for 1×20 ft or 1×30 ft Equipment & Comfort - 1× toolbox (700×400×360 mm) - Stake box - Beacon light - LED side marker lights, LED work lights - Wheel chocks - Width indicator panels with LED - Standard 2" kingpin - Metallised chassis (Zn/Al 85/15) – high corrosion protection - Colour: Red ---- Special Features - New & immediately available - High payload, extremely versatile - Perfect for machinery transport, construction equipment, vehicles, etc. - Very robust design, high-quality BPW components We are happy to provide further information on request.

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 2 pieces -Tire size: 18 x 7 - 8 SC 10 RIM 4.33 R Hjdpfxszfvu Es Afhsr -Bolt circle: Ø 140 x 18 mm -Hub bore: Ø 111 mm -Price/Fee: complete -Dimensions: Ø 445 x 155 mm -Weight: 25 kg/piece

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 2 pieces Hsdpfx Aozfvuxofhjr -Tire size: 18 x 7 - 8 SC 10 RIM 4.33 R -Bolt circle: Ø 140 x 18 mm -Hub bore: Ø 111 mm -Price/Fee: complete -Dimensions: Ø 445 x 155 mm -Weight: 25 kg/piece

Condition: new, GMN TSSV 170 s - 12000 / 18 A high-speed spindle, SN: R 237633, unused, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for packing and shipping costs! Hodpfxox Erqlo Afhor

Condition: used, Year of construction: 2006, machine/vehicle number: BM0000029, controller model: WINDOWS XP, number of spindles: 42, plate height: 60 mm, plate length: 2,800 mm, plate width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Vertical CNC machining center for drilling, milling, and dowel insertion with an additional robotic arm for loading! The machine must be picked up between June 10, 2026, and June 30, 2026! The machining center consists of two machines as follows: 1. BIESSE BREMA VEKTOR 15-18 R Working area X-axis: 2,800 mm Working area Y-axis: 1,300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 42 Total number of tool changer positions: 10 Maximum panel thickness: 60 mm Automatic panel loading system Automatic panel stacking system Drilling units Drilling unit 1: Horizontal drilling spindles in X Number of horizontal drilling spindles in X: 9 Drilling unit 2: Horizontal drilling spindles in Y Number of horizontal drilling spindles in Y: 9 Drilling unit 3: Vertical drilling spindles Number of vertical drilling spindles: 24 Hodpjy Uvnasfx Afhsr Milling spindle Number of milling spindles: 1 Number of controlled axes milling spindle: 3 Automatic tool changer: Yes Number of tool magazine slots: 10 Control and safety Control system: WINDOWS XP Machine programming software: BKEEPER Safety standard: EC marking Safety system: Safety light curtains 2. KUKA KR 180 L100-2 K 2000 Maximum panel width: 1,300 mm Maximum panel length: 2,800 mm Maximum payload: 100 kg Number of controlled axes: 6 Arm reach: 3,700 mm Number of panel stacking stations: 3 Control system: KR C 2 EQUIPMENT Automatic panel loading system Automatic panel stacking system Barcode scanner HONEYWELL Protective netting on the machine The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8530

Condition: used, Year of construction: 1994, Technical details: lifting capacity in kg: 1800 kg lift: 1600 mm fork length: 1200 mm Lifting height: 4500 mm weight of the machine ca.: 3,22 t dimensions L x W x H: L:3,38xB:1,2xH:2,3 m Forklift with side lift, forks clampable Hodpfju Nv Unex Afhjr - Drive via battery; voltage: 80V / 450 AH - Forks: clampable - Load center: 500 mm - Free lifting: 1600 mm - Fork carriage width= 1800mm - Height of the lifting frame: fork below free: 2270 mm - Tires: front/back each 2x solid rubber Documentation available *

Condition: used, first registration: 08/2011, empty load weight: 3,260 kg, maximum load weight: 14,740 kg, overall weight: 18,000 kg, tire size: 235/75 17,5, tire condition: 50 %, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: black, driver cabin: day cab, emission class: none, suspension: air, Year of construction: 2011, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, Equipment: ABS, truck registration, Vehicle number for inquiries: 41418 Krone, ZZW 18 * Year of manufacture: 2011 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Jumbo Tandem Trailer * 7.15 * 7.45 * 7.82 * Air coupling Duomatik * 15-pole connection plug * Lifting and lowering device * Rear support * Other * Inspections: MOT / Emissions Test 08.2026 * Suspension: Air * Gross vehicle weight: 18,000 kg * Tare weight: 3,260 kg * Payload: 14,740 kg * Permissible gross vehicle weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 40%|40% -- 40%|40% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 60%|60% -- 60%|60% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Parking height: 980 mm * Lifting range: 830 mm to 1080 mm Disclaimer: Subject to changes, prior sale and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing Hjdpszc Uk Uofx Afhjr * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialists, we will be happy to advise you.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch Hedpfxev Hzqxe Afhsr - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: new, For sale: new, unused KSB Etachrom B industrial pump – complete, in original packaging, with manufacturer’s documentation. The pump is designed for industrial and process applications – high-quality workmanship, made in Germany. Technical data (from the nameplate): Manufacturer: KSB Series / Type: Etachrom B Flow rate (Q): 18.0 m³/h Head (H): 45.0 m Impeller diameter: Ø 181 mm Rotational speed: 2904 rpm Hsdpoyhhqxofx Afhsr Operating pressure: PN10 Medium viscosity: 1.0 mm²/s Year of manufacture: 2023 Made in Germany Certifications: CE, EAC, UKCA Condition New – ex stock Never commissioned Original box Operating/installation manual included Condition exactly as pictured Applications Industrial installations Process systems Cooling, process water Technical and production installations

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Hsdpfszdazbsx Afhsr Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Hedpfxewc Ri Ij Afher Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Hodpewc Rk Eefx Afhor Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: used, B&R Provit controller 5C2001- removed from Battenfeld BA 6 CDC - removed from running machine - fully functionalmanufacturer: B&R manufacturer no.: 5C2001.18 Hjdpfoiyzv Ssx Afhsr spare part no.: BR177 If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: excellent (used), For sale: used Klauke K18 press. The professional ENERGOTYTAN KLAUKE K18 mechanical press is designed for the toughest electrical installation tasks. Its robust construction, suitable for both indoor and outdoor use, ensures reliable operation Hedpfxjw Slkde Afhsr

Condition: excellent (used), Year of construction: 2000, stroke length: 850 mm, operating speed: 8 mm/s, total length: 15,400 mm, total width: 6,500 mm, total height: 11,400 mm, overall weight: 4,07,000 kg, controller manufacturer: Cybelec DNC 1200, working width: 15,400 mm, bending force (max.): 2,000 t, distance between stands: 12,000 mm, number of axes: 8, Extra Heavy Duty Pressbrake 1 set top tooling 88 Gr 1 set lower dies Cybelec DNC 106EC controller Y1,Y2,X,R1,R2,R3,R4,OWK Dynamic Crowning Lower Beam What kind off jobs built for: Shipbuilding & Naval like ; Hull sections, deck plates, bulkheads ribs Defence & Military; armored vehicle structures, reinforced structe hardox / strenx Mining and Heavy Equipment; dump bodies, crusher housing, excevator, chute liners Contruction and Fabrication; bridge giders, box columns, steel frames  On and Offshore; pilers, decks, spreaders, crane componenet, wind energy offshore parts Boiler an vessels; pressure vessels, power plant components, tower or pole section   Bending examples: 35 mm thickness at 10 meter length 26 mm thickness at 12 meter length 20 mm thickness at 15 meter length Max. bending length: 15400mm Distance between column: 12000mm Max. pressing force: 2000T Dis. Beam - Table: 1500mm Beam stroke: 850mm Troth beam: 1250mm Approch speed: 80mm/min. Working speed: 8mm/min. Return speed: 80mm/min. Hsdpfxsyvh Arj Afhsr Number of controlled axis:10 Crowning: Yes Hydraulic toolclamping: Yes Power: 132kW Length: 15400mm Width: 6500mm Height: 11400mm Weight: 407000kg

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 785 mm, total length: 832 mm, total width: 631 mm, Tested forklift battery for your forklift - 48V 5PZS 775AH - DIN A + 1 year warranty + Including aquamatic (automatic watering system) + Including end discharge cable & REMA 320 plug (other plugs available on request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) Hsdpoy Rnpbjfx Afhjr + Year of manufacture: 2024 Dimensions: Length: 832 mm Width: 631 mm Height: 785 mm Weight: approx. 1,150 kg Compatible with the following models and others: Linde E 16 - 335-00 Linde E 16 - 386-00 Linde E 16 CH - 1275-00 Linde E 16 H - 386-00 Linde E 16 H - 386-02 - side battery change Linde E 16 P - 322-00 Linde E 16 P - 335-00 Linde E 16 PH - 1275-00 Linde E 16 PH - 386-00 Linde E 16 PH - 386-02 - side battery change Linde E 18 - 386-02 - side battery change Linde E 18 P - 322-00 Linde E 18 P - 335-00 Linde E 18 PH - 386-00 Linde E 18 PH - 386-02 - side battery change Linde E 18 Z - 322-00 Linde E 20 P - 335-00 Linde E 20 PH - 1275-00 Linde E 20 PH - 386-00 Linde E 20 PH - 386-02 - side battery change Linde E 20 PH EVO - 386-02 Linde EG 16 - 1275-02 - side battery change Linde EG 16 H - 1275-02 - side battery change Linde EG 16 P - 1275-02 - side battery change Linde EG 16 PH - 1275-02 - side battery change Linde EG 20 PH - 1275-02 - side battery change Linde R 20 - 1120-00 Linde R 20 G - 1120-00 Crown SC 3013 Other common battery sizes available on request. Transport can be arranged.

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 735 mm, Tested forklift battery for your truck – 48V 6PZS 750Ah – DIN A + 1-year warranty + Incl. Aquamatic system Hsdpfoy Rnndsx Afhsr + Incl. end cell cables & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 827 mm Width 735 mm Height 625 mm Weight: approx. 1,020 kg Suitable for the following models and more: Linde E15S-355-00 Linde E16 - 324-00 Linde E16 - 386-00 Linde E16L - 386-02 Linde E18 - 355-00 Linde E18 - 386-02 – lateral change Linde E18C - 355-00 Linde E18 L - 386-00 Linde E18 L - 386-02 – lateral change Linde E20 L - 386-00 Linde E20 L - 386-00 – lateral change Linde E20 PL - 386-00 Linde E20 PL - 386-02 – lateral change Linde R14 X - 116-03 – frontal change Linde R14 X HIGH - 116-00 – frontal change Linde R16X - 116-00 Linde R16X - 116-00 – frontal change Linde R16X- 116-03 – frontal change Still R20-16 Still R20-18 Still RX 20-18PL Still RX 20-20 Crown SC 5360-2.0 Jungheinrich EFG Series Jungheinrich EFG 216 Jungheinrich EFG 218 Jungheinrich EFG 220 Jungheinrich EFG 222 Jungheinrich EFG 316 Jungheinrich EFG 318 Jungheinrich EFG 320 Jungheinrich EFG DF 16L Jungheinrich EFG V 20 Jungheinrich EFG VAC 320 Toyota 7FBEF16 Toyota 7FBEF18 Toyota 7FBEF20 Toyota 8FBE16T Toyota 8FBE18T Toyota 8FBE20T Blgkcdacpxv Toyota 8FBEK18T Toyota 8FBMT18 Toyota 8FBMT20 Toyota/BT CBE 2.0 Caterpillar EP 16/20 Caterpillar EP20PN Cesab B320A Hyster J1.6XNT Hyster J1.8XNT Hyster J2.0XN LOC E20 Mitsubishi FB16PNT Mitsubishi FB20PN Mitsubishi FB20PNT Steinbock-Boss KE20 Common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 627 mm, Tested Forklift Battery for Your Truck - 48V 5PZS 625AH - DIN A + 1-year warranty + Includes aquamatic water filling system + Includes end connector & REMA 320 plug (other plugs can be installed upon request) + Capacity: minimum 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 827 mm Width 627 mm Height 625 mm Weight: approx. 860 kg Suitable for the following models and more: Linde E15 S- 355-00 Linde E16 - 324-00 Linde E16 - 386-00 Linde E16 - 386-02 - side battery change Linde E16 C - 1275-00 Linde E16 C - 335-00 Linde E16 L - 335-00 Linde E16 P - 1275-00 Linde E16 P - 386-00 Linde E16 P - 386-02 - side battery change Linde E18 - 335-00 Linde E18 - 386-00 Linde E18 - 386-02 - side battery change Linde E18 C - 335-00 Linde E20 L - 386-00 Linde EG 16-1275-02 - side battery change Linde EG16 H -1275-02 - side battery change Linde EG16 P -1275-02 - side battery change Linde EG16 PH -1275-02 - side battery change Linde EG20 PH -1275-02 - side battery change Linde T30 R - 143-00 Still R20-15 Still R20-16 Still R20-18 Still RX20-15 Jungheinrich EFG Series Jungheinrich EFG 18 Jungheinrich EFG 216 Jungheinrich EFG 216 k Jungheinrich EFG 218 Jungheinrich EFG 218 k Jungheinrich EFG 316 Jungheinrich EFG 316 k Jungheinrich EFG 318 Jungheinrich EFG 318 k Jungheinrich EFG DF 16 Jungheinrich EFG DF V16 Toyota 7FBE15 Toyota 7FBEF15 Toyota 8FBEK16T Toyota 8FBEK18T Toyota /BT CB 1600 Crown SC1018 Crown SC3240 -1.8 Hjdpfx Afey Rnmmehor Crown 5340 - 1 Caterpillar EP 16CPNT Caterpillar EP 16CPN Caterpillar EP 16C Caterpillar EP18CPNT Cesab Blitz 416 Daewoo B16X-5 Clark GEX 18/20S Clark GTX18 Clark GTX20S Doca7H Hyster J1.8XNT Komatsu FB18M Mitsubishi FB16 Nichiyu FBT15P Nichiyu FBT15P-75 Nissan G1N1 TX16 OM-Pimespo-Fiat XE 18 Yale ERP 16VT Standard battery sizes available, please inquire. Transport available.

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 48 V, total height: 630 mm, total length: 1,025 mm, total width: 525 mm, Tested forklift battery for your truck – 48V 5PZS 625Ah – DIN B + 1 year warranty + incl. Aquamatik (automatic water filling system) + incl. end discharge connector & REMA 320 plug (other plug types available on request) + Capacity: min. 90–100% (C5 capacity report is provided upon delivery) + Year of manufacture: 2024 Hsdpey Rnmgsfx Afhsr Dimensions: Length 1,025 mm Width 525 mm Height 630 mm Weight: approx. 890 kg Suitable for the following models and more: Still FM 20 Still R 20-15 Still RX 20-14 Still RX 20-15 Still RX 20-16 Still RX 20-18 Still RX 20-20 Still RX 20-20 P Jungheinrich EFG Heli CPD 18 Mitsubishi FB18KT Utilev UT20PFH Common battery sizes available, please enquire. Transport possible.

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 411 mm, Tested forklift battery for your forklift - 48V 3PZS 375Ah - DIN A + 1-year warranty + Includes Aquamatik watering system + Includes end connectors & REMA 320 plug (other plug types can be installed on request) + Capacity: min. 90-100% (C5 capacity test protocol included with delivery) + Year of manufacture: 2024 Dimensions: Length: 827 mm Width: 411 mm Height: 625 mm Weight: approx. 560 kg Suitable for the following models and others: Linde E 16 - 386-00 Hsdpfxey Rnlvj Afher Linde E 18 - 386-02 - side battery change Linde P 50 Z LONG - 368-00 Linde P 60 - Linde P 60 - side battery change Linde P 60 Z - 126-00 Linde P 80 - Linde P 80 - side battery change LInde T 30 R - 143-00 Linde W - side battery change Still LTX 70 Still R 06-06 Jungheinrich EZS 570 Crown RT 3000 Crown SC 1013 Crown SC 1016 Crown SC 3013 Crown SC 3210 Crown SC 3210-1.3 Crown SC 5310-1.3 Crown SCT 6010 Nissan AS2N1L13Q OM-Pimespo-Fiat XE 12 Simai TE80IXB Common battery sizes available – please enquire. Transport available.

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 353 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – DIN B + 1-year warranty + Includes aquamatic system + Includes end cell connectors & REMA 320 connector (other types available on request) + Capacity: minimum 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,035 mm Width: 353 mm Height: 784 mm Weight: approx. 770 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde E 15 C - 322-00 Linde E 18 Z - 322-00 Linde R 10 BN - 1120-00 Linde R 10 CN - 1120-00 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - frontal changeover Linde R 12 BN - 1120-00 Linde R 12 CN - 1120-00 Hodoy Rnlcepfx Afhsr Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - frontal changeover Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 CN - 1120-00 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - frontal changeover Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 16 AS 1140 - 1120-00 Linde R 16 CN - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - frontal changeover Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N HD - 1120-00 - frontal changeover Linde R 16 SN - 115-08 Linde R 16 SN - 115-12 Linde R 20 - 1120-00 Linde R 20 W - 1120-00 Linde V - 5213-00 Linde V 10 E - 146-00 Linde V MODULAR - 5213-00 Crown ESR 5220-1.4 Still FM 14 N Jungheinrich ET 110 Jungheinrich ET 112 Jungheinrich ETV Jungheinrich ETV 110 Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV Q TCM RTL140 Common battery sizes available – please inquire. Transport can be arranged.

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 353 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – DIN B + 1-year warranty + Includes aquamatic system + Includes end cell connectors & REMA 320 connector (other types available on request) + Capacity: minimum 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,035 mm Width: 353 mm Height: 784 mm Weight: approx. 770 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde E 15 C - 322-00 Linde E 18 Z - 322-00 Linde R 10 BN - 1120-00 Linde R 10 CN - 1120-00 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - frontal changeover Linde R 12 BN - 1120-00 Hedoy Rnk Espfx Afher Linde R 12 CN - 1120-00 Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - frontal changeover Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 CN - 1120-00 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - frontal changeover Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 16 AS 1140 - 1120-00 Linde R 16 CN - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - frontal changeover Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N HD - 1120-00 - frontal changeover Linde R 16 SN - 115-08 Linde R 16 SN - 115-12 Linde R 20 - 1120-00 Linde R 20 W - 1120-00 Linde V - 5213-00 Linde V 10 E - 146-00 Linde V MODULAR - 5213-00 Crown ESR 5220-1.4 Still FM 14 N Jungheinrich ET 110 Jungheinrich ET 112 Jungheinrich ETV Jungheinrich ETV 110 Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV Q TCM RTL140 Common battery sizes available – please inquire. Transport can be arranged.

Condition: refurbished (used), battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 519 mm, Tested forklift battery for your forklift - 48V 4PZS 500Ah - DIN A + 1-year warranty + Includes Aquamatik (automatic electrolyte filling system) + Includes end cell connector & REMA 320 plug (other plugs can be installed upon request) + Capacity: minimum 90-100% (C5 capacity report provided upon delivery) + Year of manufacture: 2024 Hsdpfx Asy Rnklefhsr Dimensions: Length 827 mm Width 519 mm Height 625 mm Weight: approx. 710 kg Suitable for the following models and more: Linde E 12 - 386-00 Linde E 14 - 335-00 Linde E 14 - 386-00 Linde E 14 - 386-02 – side battery change Linde E 15 S - 335-00 Linde E 16 - 386-00 Linde E 16 C - 386-00 Linde E 16 C - 386-02 – side battery change Linde E 16 L - 335-00 Linde E 18 - 386-02 – side battery change Linde E 18 C - 335-00 Linde E 20 L - 386-00 Linde T 30 R - 143-00 Still FU-X 20 Still R 20-14 Yale ERP 15 VT Yale ERP 16 VT Jungheinrich EFG Jungheinrich EFG 110 K Jungheinrich EFG 213 Jungheinrich EFG 215 Jungheinrich EFG 216 K Jungheinrich EFG 312 Jungheinrich EFG DF 16 Jungheinrich EFG W 1 Jungheinrich EKE 20 Toyota 7FBEST10 Toyota 8FBE15T Toyota 8FBKT16 Toyota 8FBMT15 Toyota/BT C3E120 Toyota/BT CBE 1.2 Toyota/BT CBE 1.5 Toyota/BT SSE 135 Crown 3 Crown RT 3000 Crown SC 1016 Crown SC 1018 Crown SC 3210 Crown S6 5320-1 Crown SCT 6020 Balkancar EV698 Caterpillar EP13PNT Caterpillar EP15PNT Cesab 5 Cesab B315 Cesab B315A Cesab CBE1 Clark GEX16 Clark SC5310-1.3 Clark TM 16N Hyster J1.5XNT SW Komatsu FB15M Mitsubishi FB13PNT Mitsubishi FB15PN Mitsubishi FB15PNT OM-Pimespo-Fiat XE 15 OM-Pimespo-Fiat XE 18 Common battery sizes available upon request. Transport can be arranged.