Used 2004 Pressta Eisele Profilma 500 for sale (15,840)

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm Cutting area up to 80x200 mm Bodpfx Agoxn Iq Ds Hjwn Stroke length: max. 800 mm with digital display Saw blade RPM: 2,000 - 3,800 rpm. Piece counter with automatic shut-off when the target value is reached Continuously adjustable pneumatic material feed Hydro-pneumatic saw feed Pneumatic material clamps Spray device Including user manual Machine dimensions: 2100 x 1100 x 1500 mm (W x D x H) 1000 kg

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Bwsdpfxoy Dtpms Ag Hjn Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1587 / 1588, saw blade diameter: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. Drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. The punching direction is vertical from above, with punching tool cassettes that can accommodate up to 8 profiles simultaneously. Material feed: The feed is controlled via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per individual stroke. Bjdpfeyyz Txox Ag Hswn Control system: Modern variants often use a Siemens S7 control with touch display for intuitive operation and precise programming. The machine is designed for continuous industrial operation and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment plan or individual financing models – together we will find the right solution. Upon request, we will also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don't have to worry about a thing. 📞 Please contact us for more information or a non-binding quote. We provide you with personal and knowledgeable advice. Subject to prior sale, changes and errors excepted!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: Bwsdpfxsyyz Ebj Ag Hen - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available Bwodpfxoyyzxhs Ag Hon ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom Bwjdeyyxxfepfx Ag Hen • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Fully automatic operation Drive 7.5 kW, S6, 400 V, 50Hz, 2850 rpm For use with saw blades D 550 mm Cutting range 270x140 mm (width x height), D 185mm Max. profile width 270mm Control unit with display Including piece counter Including reversing device for a maximum cut length of 3000mm Automatic shut-off via limit switch when material ends Hydropneumatic saw blade feed, continuously adjustable, from bottom to top Vertical and horizontal clamping units, on both infeed and outfeed sides of the saw head Pneumatic dosing spray device Cutting gap extension on both sides of the saw blade Bwjdpfx Agsyvtyvj Hjn Electronic material feed unit 3-600mm feed length, with ball screw spindle and servomotor Including pneumatic horizontal and vertical clamping device Remnant piece from 75mm, depending on profile 2 extraction ports D 100 mm Safety guard over the saw head and feed unit A suitable extraction system can also be offered!

Condition: as good as new (ex-display), Year of construction: 2018, saw blade diameter: 5,50,500 mm, Machine in perfect technical condition. Practically very little used. For processing aluminum and PVC profiles. Mitres possible in 3 levels and can be used as a splitting saw, manual adjustment of the horizontal saw blade by a maximum of 20 mm in front of the vertical saw blade. Notch options: rectangular, one-sided diagonal, two-sided diagonal, three-sided diagonal. Processing of profiles up to 300, width up to 90 °, bevels up to 30 °. Notch depth horizontally up to 185 mm, vertically up to 210 mm at an angle of 90 °. Bwsdpfovtarnex Ag Hsn Notch width at 90 °: 300 mm, profile height 280 mm Manual adjustment of the notch and height, positioning using mechanical digital displays. Vertical saw blade rotation range 30° – 90° – 30°, (front/middle/back) manual, positioning via digital display. Vertical saw blade rotation range 30° – 90° – 30°, manual, positioning via digital display. The material stop (table top) can be manually rotated left and right within the range of 30° - 90° - 30°, positioning via measuring scale. The material depth stop can be manually adjusted via the sliding carriage and manual clamp, positioning via digital display.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1015, profiles with dimensions (HxB) up to 100x195mm, 80x200 mm automatic work cycle driven by a 3 kW/400 V, 2850 rpm motor cutting disc d=450x3.8x40mm, z=110 Bodswgmv Sopfx Ag Hewn horizontal and vertical material clamping on the feed side dosing spray system horizontal material clamping in the feeder moving both clamping jaws when retracting (prevents scratching of the profile) infinitely adjustable hydropneumatic cutting disc feed cutting disc exiting from the rear length of cut sections adjustable in the range of 0-300mm (with reversing device 0-600 mm) setting the cutting length by a handwheel with a mechanical counter maximum width of the cut profile 200 mm cutting range (height x width) 100x195mm, 80x200mm automatic shutdown when material runs out possibility of connecting a dust extractor

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Bodjw D T Uiepfx Ag Hown Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Year of construction: 1999, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Bedpfx Ajvmz R Sog Hewn Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Year of construction: 1997, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Bwsdpfx Agex Ecg Us Hsn Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Bsdoxvbvvopfx Ag Hjwn Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Year of construction: 1996, condition: good (used), machine/vehicle number: 9182, Offer 23168 Technical data: - Notching possibilities + miters in 3 planes - right-angled, one-sided + two-sided + three-sided oblique . - Can be used as a shift cut crosscut saw - Pneumatic profile clamping Machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3,5 x 40 mm positive - horizontal 500 x 3,5 x 40 mm negative Bsdpfx Agsmb U E Aj Hown - notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. positioning with digital display - Swiveling range saw blade horiz. with vert. saw blade Saw blade - 45° - 90° - 45° mot. positioning with digital displays - Notching height adjustment with digital displays - profile stop shoulder manually tiltable 30° - 90° - 45° - pneumatic coolant check device - air connection 6 bar - drive 400 V / 2 x 3 kW - space requirement approx. W 2400 x H 2000 / D 1400 mm - weight approx. 1200 kg

Condition: good (used), Year of construction: 1993, Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner Bwjdpstxkprjfx Ag Hjn -Manufacturer: Emmegi, Pressta Eisele, Double miter saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: swivels 45° -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: excellent (used), Year of construction: 2017, Year: 2017 Bwedpfx Aey Naz Tsg Hen - technically efficient, ready to work – after full service - split heads - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table - hydraulic lock for reversing the resistance unit

Condition: new, For processing all common aluminium window profile systems such as Schüco, Hueck, Heroal, Reynolds, etc. Universally applicable thanks to double adjustable punching tools. Suitable for corner brackets with groove dimensions from 25 to 60 mm and profile chamber offset from 0 to 40 mm. Continuously height-adjustable feelers, punch blades and stop inserts. Feelers and punching units are equipped with scales. Retractable stop for easy insertion of profiles, self-adjusting when advancing against the profile. Hydraulic stop locking. Pneumatic pressing operation via a lever system ensures a synchronous punching process. Bwedpfxjhmfyhj Ag Hsn 2 pneumatic hold-down cylinders for clamping the profiles. 2 eccentric discs for positioning the frames. 2 swiveling profile support arms. Operation via 2 foot valves. Includes standard tooling.

Year of construction: 2016, condition: used, Max. push length: 3000 mm Bsdpfx Aoza Akwjg Hown Sled can be folded up Manual movement Right-hand attachment 2 adjustable feet Plastic rollers

Year of construction: 2016, condition: used, Max. saw blade diameter: 350 mm Pneumatic material clamps Micro spray device Material feed via 2-hand control Bsdpfx Agszaqy Ts Hjwn The sawing table can rotate in both directions Length stop and roller conveyor available on request

Year of construction: 1996, condition: used, Unfolding width: max. 200 mm Unfolding depth: 40 mm Profile height: max. 100 mm Vise jaw opening: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by pressing the foot switch Profile clamping by infinitely adjustable vise. Bwjdpfxjq Awg Es Ag Hsn

Year of construction: 1993, condition: used, Milling cutter diameter: 300 mm Bjdpfxerv A Hmj Ag Hjwn Max. cut-off width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Sackson length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamping Minimum quantity spray device Manual feed Weight: approx. 280 kg

Condition: excellent (used), Year of construction: 1999, Type: AKF 250L Motor: 400V 2,2kW Speed: 2800 rpm Bwodpfx Agott Eb Se Hsn Cutter O: 250mm Cutter holder shaft O: 40mm Milling width: 300mm Milling depth: 85mm Profile height: 160mm Weight: approx. 150kg Dimensions W x H x D 950 x1450 x 930 mm

Condition: good (used), Year of construction: 1996, Punch, complete with base frame Hydro-pneumatic drive ■ Operation via foot valve ■ Stroke length max. 40 mm ■ 25 double strokes / min. ■ Installation height max. 250 mm 130 mm projection ■ Projection with turntable 90 mm ■ Table top height 950 mm ■ Tappet force 90 KN at 10 bar Bedpfx Agotk Ul Rj Hjwn

Year of construction: 1988, condition: excellent (used), Hydropneumatic intensifier Bodpjfitbwefx Ag Hswn Foot valve operated Max. daylight = 280 mm Dimension 60 x 850 x 1500 mm Weight 300kg

Year of construction: 1992, condition: excellent (used), Transmission of power hydropneumatic / hydraulic Bedpfxsfcbb Hj Ag Hown