Used 2G 2G Chp G Box 50 for sale (65,551)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 40,000 h, functionality: fully functional, rotational speed (min.): 1,514 rpm, rotational speed (max.): 1,514 rpm, total height: 1,625 mm, total length: 2,427 mm, total width: 994 mm, overall weight: 1,800 kg, type of cooling: water, number of cylinders: 4, cubic capacity: 4,580 cm³, torque: 341 Nm, protection type (IP code): IP54, For sale are 4 x 2G G-Box 50 cogeneration units in a soundproof enclosure. The units are fully functional and have been regularly serviced throughout their operational period in accordance with the manufacturer's service protocol, using original spare parts. Details: Manufacturer: 2G Model: G-Box 50 Quantity: 4 units Design: soundproof enclosure Engine age: 10 years Operating hours: approximately 40,000 hours Condition: fully functional and regularly serviced The set includes all necessary equipment for the operation of the cogeneration unit (CHP), including the electrical cabinet, control system, and all other required components. The units are ready for transport. Godpjz I Nakofx Ap Djbu Price: 10,000 EUR/unit

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent Gbsdpfxjz Hngmj Ap Dou • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, Year of construction: 2007, Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Gjdpfszg Nbhsx Ap Debu Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Sold with protective cover.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) Gbodpfxoz Imr Re Ap Dou ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 6125, We sell a used CEVISA beveling machine CHP-60G INV, MFG 2024, SN: 6125 60 mm bevel length; capability in one run: 28 mm bevel length; bevel finish: machined (milling head); adjustable bevel speed depending on the material; optimum beveling speed: 500 mm/min; continual plate fixing pressure system: 4 Bar; 3 feeding rollers always in contact with the plate; 1 roller positioned in the cut-off point to insure: - no vibration; no noise; -smooth and unchanging finish; portable milling machine; mobile and stable; adjustable working height with pneumatic lifting system; electronic bevel adjustment; display: high precision; built-in adjustable bevel angles from 15º to 70º * Nominal thickness: from 10 mm to 100 mm. Motor: three-phase; motor power: 5 CV – 3.8 kW; voltage: 220/380 V. 50 Hz; 250/440 V. 60 Hz; 32 A plug, cable diameter: 2.5 millimeters, maximum consumption of the machine: max. 15A. Electric box with: thermomagnetic switch trip +emergency stop button, net weight: 800 kg; works height: adjustable from 760 to 940 mm; built-in trolley; bevel blueprint; plate beveling: K, V, X, and Y bevels, bevel speed: 0,5 m/min, three-phase motor: three phases and earth. no neutral, motor power: 5 hp - 3.8 kW, air flow rate 200 l/min. Electrical box: with under-voltage trip, emergency stop button, magneto-thermal protection; net weight of the beveling machine: 800kg, working height: adjustable from 760 to 940 millimeters. Integrated carriage. Price: 28.000 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Gbodov Ef Ryopfx Ap Dju

Condition: excellent (used), High temperature debinding furnace, make GERO type: HBO 50/13-3 2G heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan Gbsdpfehgiz Iox Ap Dsu ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Condition: used, mileage: 7,65,248 km, power: 302 kW (410.61 HP), first registration: 08/2006, fuel type: diesel, fuel: diesel, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, number of seats: 2, Year of construction: 2006, Equipment: retarder, Number of doors: 2 Cab: XXL Gbsdpjzt N R Ajfx Ap Dju Number of cylinders: 6 GVW: 26.000 kg Make of engine: D28 66LF 320 Number of beds: 2 Price: On request = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: I15CIP1350GL, grinding length: 1,350 mm, total width: 700 mm, total length: 2,200 mm, total height: 1,400 mm, grinding width: 90 mm, type of input current: three-phase, input voltage: 400 V, grinding height: 30 mm, grinding spindle motor power: 2,200 W, overall weight: 455 kg, grinding wheel diameter: 150 mm, input frequency: 50 Hz, input current: 3 A, operating speed: 22 mm/s, Equipment: rotational speed infinitely variable, The electronically controlled version of the grinding wheel depth uses a PLC + HMI screen, allowing for precise control of the sharpening process. Sharpening machine motor power: 2.2 kW Grinding wheel diameter: Ø150 mm Grinding wheel peripheral speed, continuously adjustable via the CNC panel: 5 to 22 m/s Grinding wheel depth adjustment, settable via the CNC panel: 0.001–0.05 mm Maximum distance between the magnetic table and the grinding wheel: 30 mm Width of the clamp/magnetic table: 90 mm Feed motor: 0.18 kW Carriage feed speed, electronically adjustable via the CNC panel: 0.5–15 m/min Coolant pump: 0.18 kW Oil pump for lubricating the guides (operating frequency selectable via the CNC panel): 0.18 kW Coolant pump flow rate: 30 l/min Voltage: 400 V Gsdpfx Apjzytw He Djbu Frequency: 50 Hz Weight: 455 kg Maximum sharpening length: 1350 mm Machine width (approx.): 700 mm Machine height (approx.): 1400 mm Machine length (approx.): 2200 mm The grinder is connected to a coolant tank and is equipped with a magnetic screw system for collecting metal chips.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, spindle mount: MK 4, total width: 600 mm, total length: 1,135 mm, total height: 2,460 mm, table width: 600 mm, table length: 600 mm, overall weight: 950 kg, Equipment: documentation/manual, Continuous drilling capacity | steel 45 mm Maximum drilling capacity | steel 50 mm Maximum drilling capacity | cast iron 60 mm Maximum drilling depth 230 mm Thread cutting | steel M42 Thread cutting | cast iron M50 Overhang 375 mm Work table dimensions 600 × 600 mm Maximum table load 400 kg T-slots | slot size 18 mm Spindle taper MK4 Machine feed of the spindle 6 / 0.05 - 0.3 mm/rev Spindle speed 54 – 2090 rpm Gbsdoz Rlkxjpfx Ap Dou Continuously variable speed No Number of speed stages 18 Maximum distance between spindle and table 800 mm Maximum distance between spindle and base 1300 mm Column diameter 200 mm Base dimensions 600 × 520 mm Power input 2400/3000W Electrical connection 400V Dimensions (W × H × D) 600 × 2460 × 1135 mm Weight 950 kg

Condition: used, power: 150 kW (203.94 HP), first registration: 10/2008, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 2008, Equipment: spoiler, tail-lift, = Additional options and accessories = - Roof spoiler = Remarks = Polywood box 6.05 m – Palfinger tail lift – 3 seats – Gross weight 7500 kg – Unladen weight 5180 kg – Wheelbase 4200 mm – Gjdoxxg Aajpfx Ap Dobu = Further information = Suspension: Leaf suspension Front axle: Steered Unladen weight: 5,180 kg Payload: 2,320 kg Gross vehicle weight: 7,500 kg Tail lift: Palfinger, column lift Reference number: 60 Please contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: like new (used), Year of construction: 2024, operating hours: 24 h, functionality: fully functional, number of cylinders: 12, cubic capacity: 21,970 cm³, rotational speed (min.): 1,500 rpm, type of cooling: water, CHP POWER PLANT fueled by SYNGAS (Woodgas) with electrical capacity 140 kWel and thermal capacity 280kWth Gbjdpfx Aoz Iyq Tsp Dju

Year of construction: 2019, condition: like new (used), Marchenisi Group Box Forming Machine Model FRB500 Year 2019 Gsdpfx Apoybtnve Dsbu Automated box forming machine. Form cartons with a Nordson hot melt glue pump. - fill cartons with sealed strips (robot) - indexing - insert booklet - seal lid with hot melt glue - index to serialised printing - carton discharge

Condition: excellent (used), mileage: 6,26,000 km, power: 184 kW (250.17 HP), first registration: 03/2012, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 6,180 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, suspension: steel-air, total length: 10,000 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,650 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, Year of construction: 2012, Equipment: ABS, air conditioning, electric window regulation, power mirror, spoiler, tail-lift, traction control, = Additional options and equipment = - Heated mirrors - Comfort driver's seat - Roof spoiler - Speed limiter Gbodeyfhurjpfx Ap Deu - Radio/CD player - Sun visor - Toolbox = Remarks = M.A.N. TGM18.250BL 4x2 CHASSIS WITH PLYWOOD BOX, D'HOLLANDIA DHLM 1,500 KG TAIL LIFT, AS-TRONIC GEARBOX & AIR CONDITIONING (ENGINE PROBLEM!!) 250HP, EURO 5, 6 CYLINDER ENGINE!! (ENGINE PROBLEM!!) AS-TRONIC GEARBOX!! AIR CONDITIONING!! SUN VISOR!! ROOF SPOILER!! ETC.!! MULDER PLYWOOD BOX: DIMENSIONS: LENGTH x WIDTH x HEIGHT: approx. 7.65 m x 2.48 m x 2.65 m (INTERNAL)!! D'HOLLANDIA DHLM 1,500 KG TAIL LIFT!! SIDE DOOR ON RIGHT SIDE!! STAINLESS STEEL TOOLBOX!! ETC!! TRUCK HAS ENGINE PROBLEM AND IS NOT DRIVEABLE, WE CAN TRANSPORT THIS TRUCK FOR YOU!! MORE M.A.N. 4x2 / 4x4 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE: SHIPPING, STACKING, TRANSPORT, TRANSIT REGISTRATION OR LOADING? NO PROBLEM FOR US! WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUT OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! (?v=G1cTWpn_7kQ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further information = Technical information Number of cylinders: 6 Engine capacity: 6,871 cc Transmission Gearbox: AS-TRONIC, 6-speed, automatic Axle configuration Tyre size: 315/70R22.5 Brakes: Disc brakes Front axle: Max. axle load: 7,500 kg; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: leaf spring Rear axle: Twin tyres; Max. axle load: 11,500 kg; Tyre tread left inner: 60%; Tyre tread left outer: 60%; Tyre tread right inner: 60%; Tyre tread right outer: 60%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 8,765 kg Payload: 10,235 kg Gross vehicle weight: 19,000 kg Functional Tail lift: D'HOLLANDIA DHLM 1500, tailgate, 1,500 kg Superstructure make: MULDER PLYWOOD BOX WITH LOADING PLATFORM Loading platform height: 110 cm Condition Technical condition: good Optical condition: very good Identification Registration: BZ-TL-02 Further information Please contact Sales Department or Erik Engel for more information.

Condition: excellent (used), mileage: 3,68,500 km, power: 180 kW (244.73 HP), first registration: 03/2012, fuel type: diesel, wheelbase: 4,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, loading space length: 5,700 mm, loading space width: 2,430 mm, loading space height: 2,400 mm, Year of construction: 2012, Equipment: tail-lift, Refrigerated truck MAN TGL 8.180 First registration: 23.03.2012 Mileage: 368,500 km Automatic transmission Emission standard: 5 Refrigeration unit: Carrier Supra 950 MT Drive: Diesel & Electric Refrigerated compartment with 2 chambers Length: 5.7 m Height: 2.4 m Godozl Ttxjpfx Ap Dobu Wheelbase: 4.2 m Unladen weight: 6,160 kg Total weight: 8,800 kg Tread depth, front tires: approx. 45% Tread depth, rear tires: approx. 75% Brake pads, front: 50–54% Brake pads, rear: 56–57% Equipment: Automatic climate control On-board computer Central locking Cruise control Electric windows and exterior mirrors Air suspension, rear .... Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: ready for operation (used), A Tmj mitre-cutting band saw is offered. Cutting capacity at 90° round: 500mm, cutting capacity at 90° square X/Y: 500mm/500mm, cutting capacity at 45° round: 370mm, cutting capacity at 45° rectangular X/Y: 500mm/370mm, cutting capacity at 60° round: 250mm, cutting capacity at 60° rectangular X/Y: 500mm/250mm, mitre range: 90°-60°, saw blade dimensions X/Y/Z: 5620mm/41mm/1.3mm, max. cutting speed: approx. 100m/min, max. length stop: 1000mm. Dimensions X/Y/Z: approx. 2800mm/1260mm/2300mm, weight: approx. 1550kg. Inspection possible by prior arrangement. Godpezrzpbofx Ap Djbu

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, We offer you: CNC machining center, universal, with robotic automation Manufacturer: DMG MORI Type: DMU 50 3rd with Lang RoboTrex52 Year of manufacture: Machine 2017 / Automation 2021 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 60 Gedpfxoz A A E Nj Ap Dobu Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 32,000 h Spindle hours: approx. 12,000 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter - Tank 600 l - Canopy - Rotary feedthrough in spindle center - Compressed air through the spindle center - Flushing gun - Oil and emulsion mist separator, mechanical - Infrared measuring probe, manufacturer Heidenhain TS 649 (if available) - Preparation for 3D quickSET - Operating mode 4 - ATC – Application Tuning Cycle - Tool breakage monitoring TRS2 (if available) - Tracy surface interpolation - Automation system Lang RoboTrex 52 Accessories, tools, and clamping devices shown in the images are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: like new (used), Year of construction: 2022, operating hours: 458 h, functionality: fully functional, machine/vehicle number: 1536582684A, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 30 kVA, torque: 83 Nm, workpiece height (max.): 550 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 3,500 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13 W, number of spindles: 3, number of slots in tool magazine: 30, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this DMG MORI CMX 50 U universal machining center, in like-new condition. Operating hours: Power-on hours: 458 h / Spindle: 330 h, year of manufacture 2022. TECHNICAL DATA Axis travels: • X = 500 mm • Y = 450 mm • Z = 400 mm • B = -5° / +110° • C = n × 360° Work table: • 630 × 500 mm pivoting rotary table • 7 T 14 H7 grooves, 63 mm pitch • Central hole Ø 30 H6 • Permissible table load: 200 kg • Axis – table distance: 150–550 mm Main spindle (inline spindle): • Speed: 20 – 12,000 rpm • Power: 13 kW (40% DC) / 9 kW (100% DC) • Torque: 83 Nm (40% DC) / 57 Nm (100% DC) • Tool shank: SK40 DIN 69871 • Clamping according to DIN 69872, hydraulic control • Clamping force SK40/BT40: 10 kN Tool magazine: • 30 positions, chain with double gripper • Max. tool diameter: 80 mm (130 mm with adjacent pockets free) • Max. tool length: 300 mm (from the spindle face) • Max. tool weight: 8 kg • Max. magazine load: 120 kg • Tool change time: 2.7 s Feeds and accuracy: • Rapid feed rate X/Y/Z: 30 m/min • Max. feed force (40% DC): 4.5 kN • Linear guide rails with rollers on all axes • Direct measuring system on X, Y, Z (including air purge) • Positioning accuracy X/Y/Z: A = 6 µm (ISO 10791-4) • Repeatability X/Y/Z: R = 5 µm (ISO 10791-4) • Accuracy B/C: A = 16 seconds of arc (ISO 10791-4) • Repeatability B/C: R = 12 seconds of arc (ISO 10791-4) INCLUDED EQUIPMENT Base machine: • CMX 50 U universal machining center (C-A3390F) • DMG MORI SLIMline Multi-Touch 19" / Siemens 840D SL control (C-B3097F) • Coolant or air, switchable via M functions • Chip tray / drawer • Enclosure with sliding door • DMG MORI IoTconnector included as standard 20 bar production package with chip conveyor (C-K3661F): • Internal 20 bar coolant supply • Scraper-type chip conveyor, 250 l tank (left) • Washing of bed and ATC arm via M function • Coolant spray gun • External electronic handwheel • Enclosure roof • 4-color signaling lamp • Double cartridge filter (filter change without stopping the machine) Measurement / monitoring: • Renishaw measuring kit for Siemens (C-K4222F): PP40 probe with optical transmission, TS27R tool probe, measuring cycles with tool breakage monitoring, dummy tool and calibration ring • 3D QuickSET for CMX U (C-K2530F) – control and compensation of 5-axis kinematic accuracy Software and documentation: • DXF Import option on Siemens controller (C-G3067F) • Documentation in Romanian • Screen text in Romanian DMG MORI Digital Products: • Digital production package: IoTconnector, machine data connector MDC (OPC UA / MTConnect / MQTT), NETservice (remote diagnostics) • Messenger V4 – machine status in real time • DMG MORI Service Agent – preventive service warning • Machine 3D model in STEP format (upon signing of NDA, for CAD/CAM) NUMERICAL CONTROL – Siemens SINUMERIK 840D SL • TCU30.3 console, NCU720.3B PN • Safety Integrated • 19" multi-touch screen, 1024 × 1280 • Block processing time: 1.5 ms • User memory 16 MB + 4 GB extension (EES) Gjdpjz Epnvsfx Ap Debu CONNECTIONS • Standard 12,000 rpm: 30 kVA / 47 A / 50 A fuse at 400 V • With 20/40/80 bar package: 32 kVA / 50 A / 63 A fuse at 400 V • Voltage: 400 V / 230 V, 50/60 Hz, ±10% • Air: 6–8 bar, average consumption approx. 30 m³/h

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Gbedpjdkdi Tefx Ap Deu Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Condition: like new (used), Year of construction: 2022, functionality: fully functional, 1. Centering table CPRC-600, length 1.2 m - Length: 3 m - Two feed speeds (working and return) - Two centering arms - Pneumatic pressure 2. Multi-blade saw type RP-500-G, max. cutting height 160 mm - Saw shaft drive motor 55 kW, feed motor 2.2 kW (stepless speed adjustment - inverter) - Chip collection conveyor belt - Strong lateral pressure rollers for offcut removal - Automatic feed regulation - Automatic bearing lubrication - Maximum number of circular saw blades on shaft: 15 pcs (Ø 450 x 70) - Maximum thickness of cut material (cant): 160 mm - Minimum thickness of cut material: 50 mm - Minimum length of cut material: 1.2 m - Lower drive shafts: 6 pcs - Upper extraction: automatic pneumatic chip extraction, extraction socket Ø 250 mm - Lower chip extraction + belt + extraction diffuser Ø 200 mm, portable control panel - Machine length: 2100 (2600) mm Gbsdeynkgiepfx Ap Deu - Machine width: 2080 mm - Machine height: 1800 mm - Machine weight: 2200 kg - Machine’s productivity: 6-10 m³/h - Machine does NOT include saw blades - Power consumption approx. 62 kW 3. Outfeed conveyor DPTOZ-100 for ripped boards - Length: 4 m - 2 cross chains 4. Cross chain conveyor for sorting and picking boards - Width: 1 m - Length: 2.5 m Very little used. Like new. TOP condition.

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Gbsdpfx Aozt Ih Tjp Deu Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: used, GE Druck PACE5000 High-Precision Pressure Controller Manufacturer: GE Druck (Baker Hughes) Model: PACE5000 Device Type: Modular High-Precision Pressure Controller / Pneumatic Pressure Controller Pneumatic Control Module: CM0-B-16G For sale is a used GE Druck PACE5000 High-Precision Pressure Controller. This modular pressure control system was developed for demanding calibration, testing, and automation tasks and is suitable for calibration laboratories, research, development, quality assurance, and industrial test benches. The device impresses with its high control accuracy, fast pressure regulation, and extensive communication interfaces. Gbodpfx Apeziyqrj Dsu Technical Data Control Range: -1 to 70 bar(g) Maximum Allowable Working Pressure (MWP): 94 bar Accuracy: up to 0.001% of full scale (model-dependent) Long-Term Stability: up to 0.001% FS Dimensions (W × H × D): approx. 440 × 88 × 320 mm Weight: approx. 10.1 kg Pressure Control Modular pressure control system High pressure control speed Automatic pressure regulation Leak test function Burst test Switch test Programmable test sequences User-defined pressure units Display Color touch display Graphical user interface Display of setpoint and actual value Intuitive menu navigation Interfaces Ethernet USB Host USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pneumatic connections Supply Output Vent Reference G1/8" connection Power Supply 100–230 VAC 50–60 Hz Power consumption: max. 100 VA Equipment Pneumatic Control Module CM0-B-16G Color touch display Ethernet interface USB Host / USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pressure connections Power cable Accessories as shown in the pictures Application Areas Calibration laboratory Test benches Quality assurance Automotive industry Aerospace Mechanical engineering Metrology Research and development Automation technology Pressure sensor calibration Shipping Data Dimensions: approx. 440 × 88 × 320 mm Weight: approx. 10.1 kg Condition Used The device was last used in an industrial setting. Optical condition as shown in the pictures. Normal wear and tear due to age. Scope of Supply GE Druck PACE5000 Power cable Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2010, loading space length: 13,580 mm, loading space width: 2,490 mm, loading space height: 2,980 mm, total length: 13,910 mm, total width: 2,550 mm, suspension: air, tire size: 435/50R 19.5, tire condition: 20 %, wheelbase: 8,750 mm, color: other, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 435/50R 19.5 Make axles: BPW Tyre profile: 20% Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Godpfez Iydtox Ap Dobu Weights Empty weight: 7.840 kg Carrying capacity: 31.160 kg GVW: 39.000 kg Identification Registration number: OK-96-ZZ

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 01/2003, loading space length: 13,480 mm, loading space width: 2,490 mm, loading space height: 2,610 mm, total length: 13,780 mm, total width: 2,550 mm, suspension: air, tire size: 425/65, wheelbase: 8,860 mm, color: other, Year of construction: 2003, Equipment: ABS, tail-lift, = Additional options and accessories = - Air Suspension - BPW Axles Gsdpfx Apjz Imhfe Dobu - Steering Axle - Tailgate = More information = Axle configuration Tyre size: 425/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Weights Empty weight: 9.100 kg Carrying capacity: 22.900 kg GVW: 32.000 kg Functional Tail lift: D`Hollandia, slider lift Identification Registration number: OH-84-BL

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 505004, total width: 970 mm, total length: 680 mm, total height: 700 mm, empty load weight: 250 kg, input voltage: 380 V, Manufactured: 08/2005 Power: 0.55 kW Power supply: 220/380 V three-phase 50 Hz Dough weight: 50 to 1200 g Production: 1200 pieces/hour External casing made of stainless steel Mechanical side adjustments Forming belts Output receiving table Emergency stop on the front panel Dimensions: 970x680x700 mm Weight: 250 kg Used SINMAG SM-380S dough sheeter The used SINMAG SM-380S dough sheeter is designed for professional dough shaping in bakeries. This unit, manufactured in August 2005, features a 3-cylinder system, mechanical adjustments, and felt conveyor belts. Its nameplate indicates a power of 0.55 kW and a 220/380 V three-phase 50 Hz power supply. The specific data for this machine is distinguished below from the characteristics derived from the European documentation for the range. Why this SINMAG SM-380S stands out The operation is based on the progressive rolling of the dough and then its elongation. The mechanical controls allow adjusting the passage through the cylinders according to the desired result. The documentation for this generation specifies that the right handle adjusts the spacing of the front cylinders, while the left handle adjusts the inclined cylinders to adapt the final length. This design allows bakers to work with different dough weights without complex electronic programming. The European documentation associated with this version states a range of 50 to 1,200 g and a shaping width of 750 mm. Key advantages 3 cylinders for rolling and shaping Mechanical adjustments for rolling and length Felt conveyor belts Stainless steel construction, as documented for the SM-380S version Extendable receiving table Emergency stop present on this unit Gsdpfoz Eht Djx Ap Djbu Wide range of documented dough weights Detailed technical specifications

Condition: excellent (used), Year of construction: 2013, Airpress APK-G 50/500 Compressor Machine mounted on 500L tank, serviced and equipped with air dryer. Technical specifications: Capacity: 1.9 m3/min (1900/min) Motor power: 15 KW Pressure: 10 bar Operating hours: 4427 h Gbsdoy Idlyopfx Ap Deu Year: 2013 Net price: 13,700 Gross price: 16,851 The compressor is fully functional, service support provided. Video below