Used 48V Belt Starter Generator Test Bench for sale (31,358)

Condition: excellent (used), Kübrich Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box Intended use: The test bench is used for conducting tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (briefly, less than 1 s) Control voltage: 24 V Mechanical performance data according to the data sheet of the load machine Note that a gear ratio of 1:2 to the test specimen shaft must be observed. Rotational speeds: Load machine: Manual operation: 0 - 50 1/min Automatic operation: 0 - 10,000 1/min Test specimen motor: Manual operation: 0 - 100 1/min Automatic operation: 0 - 20,000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Dksdpfxszhkb So Aptst Condition: used Scope of supply: (See Figure) (Changes and errors in the technical data and details are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: 7001922, input voltage: 400 V, Equipped with 4 M-20iD/12L Fanuc robots. Dkjdpoy T Ulzofx Aptot Installation dimensions: 16,000 x 4,000 x 3,400 mm.

Condition: used, Year of construction: 2013, functionality: fully functional, total width: 1,000 mm, total length: 2,500 mm, total height: 1,020 mm, Optical table Perforated plate made of stainless steel (11 cm) Frame: 80x82x155 cm (H x W x L) Dkedpfx Aszrfl Heptjt

Year of construction: 2023, condition: excellent (used), machine/vehicle number: 0293, We are selling the test bench from the aircraft manufacturing sector. Dedpeyl S Eujfx Aptskt

Condition: like new (used), GBS Test Pulse Rev. 3 Pulse Generator for Long-Term Insulation Tests The test pulse design is designed for long-term insulation tests on test objects with capacitances up to 6 nF. Converter for High-Voltage Test Transformer · Internal sine wave generator: 50-200 Hz. · Pulse width modulation of the sine wave from 16-24 kHz via full bridge. · Converter voltage adjustable from 0-600 V, Imax=2.6 A, maximum power 1.3 kW · Pulse current limit 110 A (cut-off threshold) Pulse Transformer Control · Control via full bridge · Full-bridge power supply adjustable from 0-1000 V, 1.3 A max. · Pulse current limit 100 A (cut-off threshold) Pulse width 20-120 μs, nominal 94 μs, adjustable · 2 selectable series inductors (150 μH, 300 μH) to adjust the pulse width and rise time to the load capacitance and voltage. · Pulse repetition frequency (0.1 – 2.5 kHz), adjustable. · Polarity: Adjustable positive, negative, or alternating depending on the polarity of the sine signal. · Cosine-shaped pulse at the transformer output Pulse transformer cascade · Output transformers in a 5-way cascade circuit. · Total transformation ratio selectable as 1:7.7, 1:10, or 1:15 via taps. Maximum output voltage 15 kV with possible load capacitances of: * 6 nF with a pulse width of 73 μs at a repetition frequency of 2.5 kHz * 10 nF with a pulse width of 103 μs at a repetition frequency of 1.25 kHz · 1:1000 parallel voltage divider. · Overvoltage limitation at approx. 20-23 kV through parallel spark gaps. · Thermistor for overtemperature detection in the first transformer stage. · Ground-side current measurement socket 100 mV/A. Breakdown detection, test · If the maximum bridge currents for the transformer controls or if the maximum currents of the bridge power supplies are exceeded, the high voltage is switched off. · The device has a resettable operating hours counter to determine the test time. Manufacturer's price approx. €59,500 Dksdou Egz Rspfx Aptst Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: like new (used), Carbon Zapp GDU.2R (45F) – 2021 – Excellent Condition For sale: a professional Carbon Zapp GDU.2R (45F) diagnostic unit designed for testing and diagnosing gasoline direct injection (GDI) injectors. The unit is from 2021 and is in virtually factory-new condition – it has only been used for 1.8 hours, making it almost like new. Technical specifications: * Manufacturer: Carbon Zapp * Model: GDU.2R (45F) * Year of manufacture: 2021 * Operating hours: only 1.8 hours * Maximum test pressure: 450 bar * Tests 1 injector at a time * Power supply: 100–240 V AC, 50/60 Hz * Required compressed air: 6.5–10 bar (dry and oil-free) Application: The unit enables professional diagnostics and performance checks of gasoline GDI injectors used in vehicles such as: * Volkswagen / Audi / Škoda / SEAT (TSI, TFSI, FSI) * BMW * Mercedes-Benz * Ford EcoBoost * Opel SIDI * Hyundai / Kia GDI * Mazda Skyactiv-G * Toyota D-4 / D-4S * Honda Earth Dreams * Nissan DIG * Volvo Drive-E and many other manufacturers using injectors from Bosch, Denso, Delphi, Continental/VDO, and Hitachi. Key advantages: Dodpjzkkk Esfx Aptokt * Professional diagnostics of gasoline GDI injectors. * Precise measurement of injector parameters and performance. * Automatic test procedures. * Intuitive software. * High accuracy and repeatability of results. Condition of the unit: The unit is in excellent technical and visual condition. Thanks to only 1.8 hours of operation, it can be considered practically new. An ideal offer for a workshop or company specializing in the diagnostics and refurbishment of gasoline injection systems.

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Dedpfxsvtn Hms Aptskt Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Condition: excellent (used), For sale is a professional measurement station, the Wentworth Laboratories MP-0900, designed for testing and performing measurements on semiconductor components, circuit boards, and microelectronics. The device is equipped with a Wild Heerbrugg Epizoom 1:5 stereoscopic microscope with smooth magnification adjustment and a precise, movable measuring table. The design also features color-coded measurement ports. Data from the nameplate: Manufacturer: Wentworth Laboratories, Inc. Model: MP-0900 Serial number: 123A Power supply: 230 V Frequency: 50 Hz Weight: approximately 34.6 kg Wild Heerbrugg microscope – manufactured in Switzerland Dksdszu Tnzepfx Aptet Used condition, with normal signs of wear visible in the photos.

Condition: excellent (used), I am offering for sale a professional RF signal generator, the Agilent 83651B Synthesized Sweeper, designed for laboratory, research and development, and service applications. This device is used for testing microwave circuits, telecommunications equipment, and high-frequency measurements. Model 83651B offers a wide frequency range from 10 MHz to 50 GHz, making it ideal for laboratories involved in electronics, microwave technology, and telecommunications. The device is equipped with numerous measurement and control connectors, a GPIB interface, 10 MHz reference inputs and outputs, and the ability to interface with other measuring instruments. The equipment comes from a dismantled laboratory. It has not been tested by us and is sold as a used device. The visual condition is shown in the attached photos. Technical specifications: Manufacturer: Agilent Technologies Model: 83651B Type: Synthesized Sweeper / RF Signal Generator Frequency range: 10 MHz – 50 GHz Power supply: 230 V AC, 48–66 Hz Communication interface: GPIB (IEEE-488) Dkedszl H Ddspfx Aptot 10 MHz reference input and output Control inputs and outputs (Trigger, Sweep, FM, AM, Pulse) Applications: laboratories, research and development, telecommunications, microwave technology, RF measurements Condition Used device. Not tested. Good visual condition, with normal signs of use visible in the photos. Sold in the exact condition as shown in the photographs.

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required Dedpfxjtw S Aws Aptjkt The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Condition: used, 10 containers dedicated to hydrogen testing L 6058 x W 2438 x H 2896 mm Ready to be connected to cooling/electrical/H2-N2 systems Cooling capacity: 100 kW Electrical capacity: 40 kW (can be increased to 100 kW) Bench automation software provided (Horiba STARS) Durability testing Characterization testing Dsdjzgv Rvspfx Aptekt EU declaration of conformity available

Condition: good (used), For sale is a solid, planed, and precision-ground metal layout and measuring table with a sturdy steel frame. The massive, machined work surface is ideally suited as a precise reference and work surface in mechanical engineering, toolmaking, mold making, quality assurance, as well as in locksmithing and metalworking. Due to its robust design, the table offers a very stable and durable work base. Features: * Solid metal plate * Planed / finely machined surface * Sturdy steel frame * Additional storage space in the frame * Very heavy and robust design * Lateral holes in the plate * Used, condition appropriate for its age Suitable for, among other things: * Layout work * Measuring and inspection work * Aligning and checking workpieces * Use with height gauges and dial indicators * Tool and fixture construction * Mechanical engineering and metalworking The surface shows signs of wear and tear due to age and use, but is overall in good used condition. Plate dimensions: Length: approx. 1000 mm Width: approx. 1000 mm Due to the massive and heavy design, only pickup is possible. An inspection is possible by appointment. The stated selling price is NET, plus 20% VAT. VAT can be shown separately. Subject to prior sale and errors. Dkodpfxjzwv Hxs Aptet

Condition: good (used), Siga Type: GS-517-400 External dimensions L x W x H: 4960 x 2500 x 2400 mm. The complete system is calibrated according to DAKKS standards and is therefore approved for tests relevant to type approval. Butane loading rate - Continuously adjustable from 5 g/h to 77 g/h Fuel loading rate - Continuously adjustable from 5 g/h to 100 g/h Fuel temperature control - Continuously adjustable from 20°C to 50°C Gasoline quantity selectable - From 0 l to 8 l Selectable breakthrough criterion - From 1 g to 10 g Temperature of purge air flow - Continuously adjustable from 25°C to 30°C Precision scales for test specimen and reference AKF - Measuring range up to 6 kg, 0.1 g resolution Purge underpressure - Continuously adjustable from 0 hPa to 30 hPa Purge air flow - Continuously adjustable from 1 l/min to 60 l/min Humid purge air flow - Continuously adjustable from 10% RH to 85% RH Number of cycles from 1 to 999 (loading/purging) Condition: used Sale from our location! Dkjdpszg Ex Njfx Aptjt Scope of supply: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Bosch starter service life test The machine is a Bosch in-house production. It is used to check the service life or durability of starters (also starter motors) of engines. Manufacturer: Bosch Dsdpfxsg Ith Re Aptskt Type: Machine for testing the service life of starters Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Material test stand / final inspection  consisting of the following main components   Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Brightness levels 255 levels digital [change of control unit setting] Number of connections Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Dsdpfxog Sxmfo Aptekt Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Phase adjustment (7)         Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Shaker Fixture Cube / Clamping Cube made of Aluminum Manufacturer: Unknown Type: Shaker Fixture Cube / Fixture Block / Clamping Cube Material: Aluminum Machine Type: Clamping cube for vibration test benches / vibration testing External dimensions: approx. 240 × 240 × 240 mm For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube was developed for use on electrodynamic vibration test benches and serves for the secure fastening of test specimens, measuring setups, and special devices. Due to the precision-machined clamping surfaces and the numerous threaded holes on all sides, the fixture cube is ideally suited for testing laboratories, research institutions, mechanical engineering, the automotive industry, and aerospace technology. Technical data: Manufacturer: Unknown Material: Aluminum Design: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 mounting holes: Ø approx. 80 mm Central through hole Precision-machined clamping surfaces Threaded holes on all side surfaces Heavy-duty industrial design Dimensions: External dimensions (W × D × H): approx. 240 × 240 × 240 mm Material: Aluminum Features: Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through hole Heavy-duty aluminum construction High stiffness for dynamic loads Suitable for individual test setups Application areas: Vibration test benches Vibration testing Environmental testing Testing laboratories Research and development Mechanical engineering Automotive industry Dkedpfxozp E Dkj Aptot Aerospace technology Shipping data: Dimensions (W × D × H): approx. 240 × 240 × 240 mm Shipping via parcel service possible by arrangement. Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Scope of delivery: Shaker Fixture Cube made of aluminum Scope of delivery as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), Inspection table / Measuring table Manufacturer: STOLLE Tabletop dimensions: (mm) 3,000 x 3,000 x 350 Accuracy class 1 Tolerance 0.04 mm Plate weight approx. 6,100 kg Equipped with 13 legs for leveling. Djdpfxezwpucj Aptokt

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design Dsdpfx Ajttg S Usptskt KEY FEATURES • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Condition: used, Year of construction: 2018, Nominal power in kilowatts 7,7 MW Maximum power 8,47 MW Nominal turning speed 1150 1/min Dkjdpferr Ammox Aptst Maximum turning speed 2200 1/min Nominal torque 63940 Nm Maximum torque 70330 Nm 8 MW test bench for gears, closed loop

Condition: excellent (used), EDAG EDAG Huf Endurance Test Stand Intended use: This test stand is intended exclusively for testing components that are capable of rotational and/or translational movement within the scope of an endurance test and within the limits of the following technical specifications. Technical data: Dimensions: Width 1565 mm x Depth 615 mm x Height 1655 mm Weight approx. 450 kg Operating voltage 400V / 50Hz Dsdpszh U Rdsfx Aptskt Control voltage 5, 24 Preliminary fuse 16 A Testing device: Maximum stroke 194 mm Maximum axial force 500 N Maximum torque 5 Nm Breakaway force (manually operated slider) 15 N Displacement force (manually operated slider) 10 N Other equipment: P4, 24" TFT monitor (1900 x 1080) Operating system: Windows XP Measurement and control software: LabVIEW 2011 PC plug-in cards: 1 card, NI PCI-6251, 1 card, N1 PCI-7044 Drawer: 500 mm (full extension with automatic closing) Additional load: 500 N Drawer cabinet, lockable: 3 drawers The teach-in endurance test stand is a device for carrying out endurance tests on test objects that can rotate and/or move translationally, e.g., cylinder locks, door handles, key functions. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, LDS V790-335T Vibration Test System with HPA-K CE Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V790-335T with HPA-K CE Amplifier Machine Type: Electro-dynamic Vibration Test System / Shaker System Cooling: Air-cooled Vibrator For sale is an industrial vibration test system from the manufacturer LDS (Ling Dynamic Systems). The system was designed for professional vibration and shock testing and is suitable for research and development, quality assurance, environmental simulation, electronics testing, as well as industrial stress and endurance tests. Technical Data Shaker Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: Air-Cooled Vibrator Model: V790-335T Armature diameter: 335 mm Frequency range: DC to 3,000 Hz Resonant frequency: approx. 2,250 Hz Max. continuous displacement: 50.8 mm pk-pk Max. velocity: 1.5 m/s Sine force peak: approx. 6.67 kN / 1,500 lbf Random force RMS: approx. 6.67 kN / 1,500 lbf Half-sine shock force peak: approx. 26.69 kN / 6,000 lbf Effective moving mass: approx. 13.08 kg Internal load capacity: approx. 160 kg Compressed air supply required: Load support: approx. 5.52 bar / 80 psi Optional air isolation: approx. 5.52 bar / 80 psi Power Amplifier Manufacturer: Ling Dynamic Systems Ltd. (LDS) Product: HPA-K Amplifier Model: HPA-K CE Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 V Current setting according to nameplate: 400 V Maximum connection power: 9.3 kVA Weight of amplifier: approx. 750 kg Equipment LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units PC workstation with monitor, keyboard, and mouse Cables and connection accessories as shown in the pictures Dksdpfx Ajy Uigcsptot Emergency stop units and safety accessories Existing documents and documentation Areas of Application Vibration testing Shock testing Environmental simulation Electronics testing Automotive industry Aerospace Research and development Quality assurance Industrial stress tests Scope of Delivery LDS V790-335T Air-Cooled Vibrator LDS HPA-K CE Power Amplifier Control and rack units as shown in the pictures PC workstation as shown in the pictures Cables and accessories as shown in the pictures Existing documents / manual Condition Used System from industrial use Optical condition as shown in the pictures Normal signs of wear and tear and storage Inspection and testing on site are possible and expressly desired after prior arrangement. Due to the size and weight, professional dismantling, loading, and transport organization are recommended. Availability: by arrangement. Scope of delivery as shown in the pictures. Changes and errors in the technical data as well as prior sale are reserved.

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: CRi PC singelline, Well-functioning Common Rail diesel injector test bench. The machine is equipped with a new PC and recent software. It is supplied with a large selection of clamping blocks, test cables, return connections, and high-pressure pipes. Dkjdpfxoxiyxvo Aptet

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Technical Highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors - 230 V / 50 Hz - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Dodjzimb Dopfx Aptokt Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.

Condition: excellent (used), functionality: fully functional, Granite measuring table Dedpfxoxwp Ico Aptokt without height measuring device! Condition: very good (like new) With low-vibration base, ideal for precise measuring tasks in production and quality assurance. Dimensions: L/W/H 660 mm x 660 mm x 800 mm; thickness of the granite plate 160 mm.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale: EFCO Maschinenbau PS 15 Valve Testing Bench. The bench is pre-owned and in excellent working condition. It is currently connected and can be inspected and tested on-site. EFCO PS series test stands are designed for pressure and tightness tests on various types of valves. Suitable for testing shut-off, control, and safety valves. Specification: Model: EFCO PS 15 Vertical Test Bench Clamping Force: 15 t Dedpfxoy R N A Ae Aptekt Suitable for testing: Shut-off valves, control valves, safety valves Working Range: DN 50–600 DN 2″–24″ The working range can be extended using external testing Test Pressure: Water up to 1380 bar (20000 psi) Air / nitrogen up to 300 bar (4350 psi) Quick specimen clamping Convenient and safe operation Robust industrial frame More information: EFCO PS 15 Professional German equipment suitable for repair workshops, energy, oil, gas, and industrial companies. If you have any further questions, we will be glad to assist you.