Used Abc-Group Piec for sale (13,064)

Condition: new, functionality: fully functional, Year of construction: 2026, Detailed Specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove structure; steel sheet 0.5 mm with mineral wool insulation inside - Box: Panels 100 mm thick, filled with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, total 1 set - Roof: Panels 100 mm thick with mineral wool insulation inside - Control system: Heating control, time setting, fault indicator, emergency stop, hour counter, temperature limit regulator, total operating hours display - Total power: 6 kW Hedpfx Anoxna U Usyst - Overhead conveyor system: 4 tracks; maximum load 400 kg each We can manufacture ovens of any required dimensions. We provide complete systems including transport traverses, spray walls, and powder coating guns — as shown in the photos.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 5,850 mm, total length: 12,125 mm, total width: 5,150 mm, overall weight: 8,000 kg, warranty duration: 12 months, inner dimension height: 5,000 mm, inner dimension length: 12,000 mm, inner dimension width: 5,000 mm, Equipment: cabin, lighting, PAINT BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: ‎ ㅤ- 2x supply fans ‎ ㅤ- 2x exhaust fans TECHNICAL PARAMETERS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four leaves, reinforced hinges) - An additional BOX 1650 mm x 8000 mm should be included in dimensions – can be placed on either the right or left side. - Structure: galvanized steel frame - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool insulation - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibration and the air surge effect from the main supply duct. Double Roof Design: - Upper outer layer - Inner truss structure with V600 ceiling filter Air Circulation System: - Supply system: Jet turbine 7.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 2 units Air Filtration System: - Pre-filter collects particles larger than 10 μm - Ceiling filter collects particles larger than 5 μm - Floor filter: Paint Stop - Carbon filter Lighting: - Ceiling lights: 52 LED tubes (14 angled fixtures with 4 tubes each) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burner: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating time: 8–15 min (max. 80°C) Optional Features: - Roof-mounted boxes - Insulated roof - Pass-through doors - Water curtain - Color according to RAL palette - Explosion-proof (EX) version available Hjdpfxjxm U Exe Anyet

Condition: new, Year of construction: 2026, The illustrative photos show the realizations for the customer of the 4x7 cabin The offer applies only to the painting booth without the preparation area (possibility to purchase a preparation zone at the customer's request) - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm Hjdpfx Ansr Ha Eheyot - Entrance gate: 3000x2600 mm (three wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 16 kW - Floor fully grated - Air supply system: Jet turbine 4.0kW - 2 pieces - Exhaust system: Stream turbine 5.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 8 pcs. Power: 48W - one piece 1000 lumens - Burner Riello 40 G20 95-213 KW - The cabin is available in different colors

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Tsunezawa Group automatic filleting machine that can be operated by 1 person. This is a specialised, high-efficiency filleting machine designed for salmon processing, specifically to remove the belly bones while producing a three-piece fillet (three-way filleting). Manufacturer - Tsunezawa Group Co., Ltd. Model - TAF-BG Filleting Machine. Date of manufacture – 2019. Throughput – 20 to 30 fish / minute, depending on fish size. Processing capability – can handle fresh salmon and thawed salmon down to -4C. Electrical requirements – 400 V / 50 hz / 3 phase. Power consumption – 3.45 kW. Overall dimensions - 2300mm long x 1550mm wide x 1800mm high. Weight – 1,000 kg (approx.). Condition – Very good - last used for production in summer 2025. Hsdpfxsy Rimzj Anyst Supplied with User Manual and spare knives.

Condition: new, Year of construction: 2026, - External dimensions: 7200x5200x3800 mm - Internal dimensions: 7100x5100x3100 mm - Entrance gate: 4000x3100 mm (four wings) - Service door: 640x1800 mm Hjdpfxjm Tv I As Anyot - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 21kW - Seating: inside/outside (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors

Condition: new, Year of construction: 2026, - External dimensions: 8125x4650x4600 mm - Internal dimensions: 8000x4500x3800 mm - Entrance gate: 4000x3800 mm (four wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 22kW - Seating: inside/outside (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 36pcs. Hodonbdlbjpfx Anyst - Side lights: LED panel 120x30cm - 12 pcs. Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors

Condition: excellent (used), Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, clamping force: 3,200 kN, screw diameter: 65 mm, clearance between the columns: 680 mm, displacement volume: 929 cm³, injection pressure: 2,130 bar, injection weight: 845 g, ejector force: 62,000 N, ejector stroke: 160 mm, plate length: 680 mm, plate height: 680 mm, total length: 7,010 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 13,500 kg, type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, The Haitian Mars Series MA3200 (available in generations II and III, as well as an Eco variant) is a servo-hydraulic injection molding machine with a clamping force of 3200 kN (320 US tons). The machine was in operation at an R&D test center in Israel for quality control purposes. The machine operated without any issues until it was deactivated in June 2026. You can find an exact specification in the documents. Hodszww D Sopfx Anyst Delivery terms: EXW Israel – Zeelim, unpacked on the ground, transport and packaging at the buyer's expense.

Condition: good (used), functionality: fully functional, We are selling our chip conveyor in technically and visually perfect condition. Hsdpfezxbgtjx Anyst

Condition: excellent (used), Year of construction: 2015, operating hours: 26,407 h, functionality: fully functional, BLM Group ADIGE-SYS EM 80 – Fully automatic circular saw for tubes and profiles, year 2015. We offer for sale a fully automatic circular saw, the BLM Group ADIGE-SYS EM 80, designed for precise and highly productive cutting of tubes and profiles in serial production. The machine is equipped with a Siemens SINUMERIK CNC control system and an automatic material feeding system, which enables efficient and repeatable production of larger series. Technical data: Manufacturer: BLM Group / ADIGE-SYS Model: EM 80 Year of manufacture: 05/2015 Hedpfxszvm Dfj Anyst Control system: Siemens SINUMERIK Operating hours: approx. 26,400 h Tube cutting range: Ø 10–80 mm Max. length of finished part: 600 mm Total installed power: 38 kW Power supply: 380 V / 50 Hz / 3 phases Machine weight: approx. 8,500 kg Equipment: automatic material feeding system fully automatic working cycle multiple tool/working positions complete enclosure of the working area extensive set of interchangeable clamping jaws for various diameters – see photos supply and feeding section of the line Siemens SINUMERIK CNC control The machine is particularly suitable for serial production of shorter parts made of tubes and profiles, where high productivity, repeatability, and cutting accuracy are required. Condition and history: The machine was purchased by the current owner approximately 2 years ago for a planned production project, which was ultimately not carried out. Therefore, it has not been used in production since then. The machine has undergone a refurbishment of the hydraulic brake seals on the bed. Technical documentation in German is available, including complete electrical documentation. The offer also includes accessories and a set of clamping jaws shown in the photos.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, BEM 200 Case Former Hsdpfx Anjzr Ixioyst We offer for sale the BEM 200 Case Former. The BEM200 model is an automatic machine designed and manufactured for folding cardboard boxes and sealing their bottoms with tape. This model belongs to the mid-range/high-end category of machines and, due to its applications, covers almost all industries that use cardboard packaging.

Condition: used, Year of construction: 2009, functionality: fully functional, overall weight: 452 kg, Surface Planer/Thicknesser, Planer TECNOMAX FS 41 elite – after technical inspection, ready for operation Specification: • Condition – used, after comprehensive technical inspection • Manufacturer – TECNOMAX (SCM Group) • Model – FS 41 elite • Working width – 410 mm • Thicknessing working height – 240 mm • Table length – 200 cm • Sound-dampening combs at the cutter block • 3.0 kW motor • 3-knife cutter block for traditional blades • Extraction port diameter 120 mm • 2 feed speeds (6 and 12 m/min) • Original paintwork • Weight – 452 kg • Year of manufacture – 2009 • Overall dimensions – 220 x 90 x 100 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The photos shown represent the actual condition of the item for sale • Possibility to power up and test the machine on site • The auction price does not include VAT or transport costs Financing and transport: Hodpfx Anjy Inuxjyet • We organize transport via the MDD fleet, courier companies, or external carriers • We provide financial support in the form of leasing or lease loan options

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Hedpfjx Dbkcex Anyst Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Hjdpfezvq Rcex Anyet Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: good (used), functionality: fully functional, REF: MM6466 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Manufacturer - OK International Group. Model - SB-40 EU. Hedpfx Aozudu Sonyet Serial number - 218-2527-23 Speed - variable, up to 21.3 m/m. Bag material - Heat sealable materials up to 15 mils or 380 microns. Direction - Right to Left.

Year of construction: 2007, condition: used, machine/vehicle number: EKP 84325-81, OPTICAL SORTER FOR CONTAMINANT SEPARATION - SORTEX by Bühler Hodoyv Aitepfx Anyot Type: MEAF DevCtrl Year of manufacture: 2007 Advanced optical machine designed for automatic sorting of bulk products, primarily foodstuffs, by color, shape, and structure. The unit is mechanically functional. Calibration required. Quoted price does not include transport.

Condition: excellent (used), Year of construction: 2010, Cylindrical grinding machine Fab. Robbi Group Typ. Omicron 600 RT5 Year 2010 Technical data Make Robbi Group, IT Type OMICRON 600 RT5 Year of manufacture 2010 table Center width 600 mm Sanding length max. 600 mm Swivel range + 9° / - 5° Hjdpjwhm Rfjfx Anyst Center height above table 160 mm Workpiece weight between centers 120 kg Workpiece weight for fly grinding 40 kg Tailstock Quill stroke 25 mm Quill diam. 43 mm Internal mounting cone CM 4 Workpiece headstock Rotation speed 0 - 600 Internal mounting cone CM 4 Spindle passage 26 mm Grinding wheel Diameter 450 mm Width min 20 / max 50 mm Bore 127 mm Equipment - Manual or automatic cycle - Automatic dressing compensation - Simplified presetting of grinding wheel and workpiece All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Stationary reciprocating compressor with a balanced horizontal configuration. Three-stage, double-acting design with intercooler, crossheads and circulating-water cooling. Capacity: 17.88 m³/min. Discharge pressure: 16 bar. Speed: 721 rpm. Crankshaft power input: 199.4 hp. Serial No.: 21968. Hedozvcfrspfx Anyst

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 192378-16-001, total length: 6,000 mm, total width: 2,400 mm, total height: 2,750 mm, overall weight: 6,000 kg, Equipment: type plate available, Contact Oven "Hitec", type BG 600-3600 E continuous grilling line All stainless steel with lower and upper belt: lower and upper heating Belt temperature adjustable separately Mesh length: 3,600 mm Belt width: 600 mm Electrically heated 136 kW Belt washing system Hedpjwxvqpofx Anyst Temperature range from 50 to 260°C Adjustable speed Dimensions (L x W x H): approx. 6,000 x 2,400 x 2,750 mm year: 2021 Condition: Like new

Condition: good (used), Year of construction: 2013, Sorter for Light Loads, Optimus, SORTING SYSTEM OPTISORTER HORIZONTAL, 200 Trays, with 261 Target Configuration – Used – : Sorter price incl. control system: ex-works: €99,500 (net), including dismantling, packaging and loading! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Model: OPTISORTER HORIZONTAL Year of manufacture: 2013 • UNIQUE PUSH-TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control system: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6,000 trays/h Hedpfewxu A Rox Anyet Total system length: 53 m Total system width: 14 m Number of induction stations: 1 Induction station width: 2 m Number of trays: 200 pcs Usable size per tray: 450 x 700 mm Tray pitch: 520 mm Chute width: 680 mm Number of drives: 3 pcs Product dimensions (L/W/H): Sorter: min.: 150 / 120 / 10 mm max.: 600 / 400 / 200 mm Weight: min.: 0.25 kg / max.: 5 kg No longer available: the roller conveyors, pick-by-light system, flap elements. There were two targets per sorting station, sorted into the upper or lower target roller conveyor via tilting chutes. Total number of targets on the sorter: 261 targets in the system. Number of targets for special purposes (overflow, reject, etc.): 3 pcs. A pick-by-light system is installed on the target roller conveyor. This means all components installed downstream of the trays after discharge are no longer present and are therefore not part of the sale! Condition: good Available: immediately Location: warehouse in Frankenberg/Saxony Detailed description available on request as PDF (in English).

Condition: refurbished (used), Year of construction: 2014, operating hours: 20,000 h, DG Tech – Authorized BLM Group Inspection Center DG Tech was established as a spin-off from DGService to specifically address the market for used BLM Group machines. Leveraging our experience in after-sales service and continuous technical training, we offer a comprehensive and reliable service. We manage the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high-quality standards. We handle logistics, disassembly, and transportation directly, eliminating the risks associated with private sales. In partnership with BLM Group, we provide dedicated software, technical training, and post-sales support. We also offer flexible operational leasing solutions to optimize investment and productivity. Configuration: BEAM LOADER L=6500mm, UNLOADER 4500 mm, ROFIN DC 020 LASER SOURCE, CHILLER, LT120 EXHAUST SYSTEM, LT120 WELDING SEARCH OPTICAL SYSTEM, INTEGRATED MICRODOSING. Hodpfx Aozhw H Ijnyst

Condition: used, Year of construction: 2006, operating hours: 5,126 h, functionality: unexamined, power: 3,500 kW (4,758.67 HP), overall weight: 43,200 kg, Complete oil-fat-fuelled cogeneration unit. ABC 16VDZC-1000 electric engine, AVK DIG150L-6 alternator. Complete system including supervisory management and all peripherals. The entire installation is still assembled as originally configured and can be inspected. Please contact via email. Hedoy Hiuqspfx Anyet

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Wire diameter range: 2,0 - 10,0 mm Wire feeding length: unlimited No. of CNC-axes: 5 Bend-back clearance: max. 600 mm Weight: 2.400 Kg. *with chamfering unit* complete with an motorized wire decoiler table diamtere: 1.500 mm Hedpoy Ehrfjfx Anyet loading capacity: 1.500 Kg.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: M22-0012, mandrel length: 1,800 mm, mandrel diameter: 1,500 mm, type of input current: AC, total width: 1,800 mm, roll diameter: 1,500 mm, overall weight: 3,000 kg, product width (max.): 1,800 mm, input voltage: 480 V, General Features The single-shaft slitter rewinder uses independent presses for accurate, safe rewinding. Unwinder A shaft-less unwinder allows floor-level reel loading and dual rotation directions. Pneumatic-mechanical chucks secure the reels. Rollers and Alignment Hodsy Ufgrspfx Anyjt Aluminum rollers enhance durability and lightness. An automatic web aligner centers the master reel using edge detection. Tension and Cutting Control AC motors, load cells, and diameter calculation control unwind tension. The shear-type cutting group features 14 circular blades with pneumatic supports and has a quick-change counter-blade shaft. Curved rollers and suction nozzles manage cut separation and scrap removal. Rewinding Presses and Holding Steel, molybdenum-coated presses ensure longevity. Motorized tips enable automatic reel positioning. Rewinding Control A steel pressure roller—pneumatically operated with a proportional valve—sets pressure. Rewinding torque is managed via operator panel controls. A pneumatic clamp and two AC motors balance tension. Discharge and Safety Systems A hydraulic shovel and pusher facilitate reel discharge. The area is secured by a safety barrier. Control and Automation System AC motors and vector drives (SIEMENS) with proprietary software handle diameter calculation and torque control. All functions are accessible via a touch terminal with PLC communication.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 140311, cutting width (max.): 1,150 mm, Equipment: documentation/manual, Paper slicer- DATIEN 115 ECE group SBL Model: CT - 115 ECE Year of production: 2014 Factory number: 140311 Condition: Perfect. The slicer worked in a very small load. Machine connected, possibility of testing. Spare knives - 2 pcs. total 3 pcs. Full technical documentation Attractive price for quick sale. Hjdpfxjt U D Hus Anyst

Year of construction: 2019, condition: like new (used), Thermoformer Designed for pharmaceutical environments, it can thermoform trays for vials, ampoules, syringes, and medical devices in general, using thermoformable films such as PVC, PET, R-PET, Polystyrene (PS), PP, PLA, etc. Possibility to cold-form Aluminium based materials. Main Features: Balcony structure for easy access and cleaning High-speed positive automatic product feeding systems Available with or without a sealing station Hjdeybcwtjpfx Anyot Arrangeble for in-line connection Quick, repeatable, and tool-free format change Thanks to the servo-assisted main transmission, the machine speed is adjustable from the main HMI within dedicated recipes Automated thermoformer machine. Forming material reel unwinding - preheating - forming - filling with laminated strips (robot) - applying and sealing tyvek lid - cooling - serialised printing - indexing - punching - feed sealed strips out to box packaging machine.