Used Abstand 170 Mm 310/6 for sale (98,534)

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, The shears are in good working condition, and an inspection while in operation is possible upon agreement. Technical specifications: Manufacturer: SAFAN Model: B-Shear 310-6 TS100 Serial number: B8913 Year of manufacture: 2006 Working length: 3,100 mm Maximum steel sheet thickness: 6 mm at 450 N/mm² Power consumption/input: max. 11 kW Power supply: 3 × 400 V / 50–60 Hz Weight: 6,120 kg Iedpfx Aljzu Sxlsxsif Maximum working pressure: 300 bar CE compliant. The shears are located in a heated hall and are still in operation. 90% of the time, sheets with a thickness of 0.5 mm were cut on them. The shears have pneumatic rear supports. Regular maintenance.

Condition: excellent (used), Catalogue number 7316 TECHNICAL DATA - Track width: 350mm - Working width of shaft with saws: 355mm - Max. blade diameter: 450mm - Max. cutting height: 170mm - Blade bore diameter: 70mm - Table dimensions: 1850x790mm Iodpfx Alezr U Tysxeif Top section: - Pawls - 2 smooth, metal sliding shafts - Shaft with saws - 3 smooth, metal sliding shafts Bottom section: - Guide bar - Pawls - Track - Toothed, metal feed shaft - Central lubrication, electric - Stepless feed speed adjustment - Electric lifting of body up/down approx. 1kW - Feed motor: 2.2kW - Main motor: 75kW - Overall dimensions (L/W/H): 2600x1800x1700mm - Weight: 2700kg – Used multi-blade saw – Very good condition Net price: 68,900 PLN Net price: 16,400 EUR depending on 4.2 EUR exchange rate (Prices may vary with larger fluctuations)

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 150 mm, roller (top) diameter: 170 mm, side roll diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 1,500 kg, total length: 2,500 mm, total width: 800 mm, total height: 1,100 mm, power: 5 kW (6.80 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, PLATE ROLL 2000x6 mm SERGI 3ROLL INITIAL PINCH ASYMMETRIC 2050 X6 MM Rolls length 2050 mm -Top roll 170 mm -lower/Side rolls 150 mm -Power electric 5,5 Hp Iedpfx Aljx Ewa Ejxeif Capacity -plate width 2000 mm -plate thickness 6 mm with prepinch Configuration on the machine -Rollers surface hardened high strength -Central rolls driven electric rotation on gearunit -side roll electric run with prepinch Pinch roll position with handwheel Front open manual drop-end -Readout gauge of side bending roll -Foot-pedal electric rollers rotation back/forth -Joystick electric control of side roll -Safety installations with emergency stop.

Condition: used, Lens Height without base: 290 mm Iedpfjcrcxtox Alxoif Base width: 50 mm Distance: 170 mm

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 035-804, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, Year of manufacture 1996, the latest tools were acquired in 2024. Ijdpfezlytxsx Alxsif Window production: wooden and wood-aluminum windows. Oppold 67 mm wood and wood-aluminum. Zuani 79 mm wood and wood-aluminum. Zuani 91 mm wood and wood-aluminum. Also, production of entrance doors and lift-and-slide doors. The production line is still fully assembled and functional. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2002, turning diameter over cross slide: 260 mm, turning diameter: 200 mm, spindle speed (max.): 500 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,377 mm, total length: 4,165 mm, total width: 1,594 mm, overall weight: 3,200 kg, bar diameter (max.): 50 mm, For sale is a CNC turning machine with 6 driven tool positions, manufactured by Gildemeister, model CTX 310, from the year 2002. The machine is in good condition; of particular note are the low spindle hours and the measuring system. Technical data: Year of manufacture: 2002 Iiedpfx Ajzkr Skelxsf Max. spindle speed: 5,000 rpm Speed at constant power: 833-3890 rpm Spindle power: 7.5 kW Chuck diameter: 210 mm Spindle bore: 68.5 mm Distance between centers: 581 mm Center height: 190 mm Diameter over machine bed: 330 mm Diameter over slide: 260 mm Swinging diameter: 200 mm Bar capacity: 50 mm Z-axis travel: 450 mm X-axis travel: 160 mm Rapid traverse Z: 30 m/min Rapid traverse X: 20 m/min Rapid traverse C1: 100 rpm Torque C1: 112 Nm Feed force Z: 4500 N Feed force X: 4500 N Number of axes: 2 Turret with tool drive from Sauter Tool positions: 12 Driven tool positions: 6 Cross-section of tools: 20*20 mm Speed of driven tools: 4200 rpm Power of driven tools: 4.2 kW Footprint (installed): 4,165 * 1,594 * 2,377 mm Footprint (transport): 3,190 * 1,600 * 1,700 mm Weight: approx. 3,200 kg Upon request, transport and loading can be arranged throughout Europe for an additional charge. Prices are plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: good (used), Year of construction: 2008, functionality: fully functional, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear braking unit, automatic band length adjustment Dust extraction system controlled depending on the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Iiodpjx Rdn Tefx Alxjf Drive: 15 kW Includes continuously adjustable sanding speed via electronic frequency inverter, with double number of extraction holes for the dust extraction device. Anti-wear braking unit, automatic band length adjustment for abrasive belt edges potentially of different lengths; dust extraction controlled by workpiece detection, deactivatable, counter-rotating abrasive belt. 2 Pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable individual pressure elements, for single and multiple workpiece feeding. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m by maintenance-free pressure magnets. Working width as well as start and end positions of the pressure beam are electronically adjustable. The pressure elements are driven by lifting electromagnets capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees constantly proportionate pressure relative to pad overlap on the workpiece. The risk of sanding through on the edges is virtually eliminated by this dynamic, continuous pressure force control.

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality, all-in-one winter combination machine, type 5K 310-2600, manufactured in 2019. This machine combines several processing units in a compact design and is ideal for carpentry workshops, joineries, and demanding woodworking applications. The technical data has been taken from the nameplate. Technical data Manufacturer: Winter Holztechnik GmbH Type: 5K 310-2600 Year of manufacture: 2019 Machine no.: 201904001 Weight: approx. 575 kg Voltage: 400 V / 3 phases / 50 Hz Jointer and Thicknesser Motor power: 2.8 kW Planing width: 310 mm Knife shaft Ø: 70 mm 3 knives Knife shaft speed: 4,800 rpm Removal rate (jointing): max. 4 mm Removal rate (thicknessing): 2 mm Feed speed: 6 m/min Jointing table: 1,380 × 310 mm Thicknessing table: 540 × 306 mm Max. feed height: 235 mm Sliding Table Circular Saw Motor power: 3.8 kW Saw blade Ø: 315 mm Main saw blade speed: 4,500 rpm Cutting width with parallel fence: up to 860 mm Sliding table: approx. 1,260 mm Blade tilt: 90°–45° Spindle Moulder Motor power: 2.8 kW Spindle diameter: 30 mm Working height: 100 mm Speeds: 1,800 / 3,000 / 6,000 / 9,000 rpm Mortising Machine Drill chuck: 16 mm Drill stroke: 140 mm Table size: 500 × 210 mm Max. workpiece length: 1,250 mm Equipment Spindle Moulder Jointer and Thicknesser Mortising Machine Sliding table Angle and parallel fence Compact multi-function machine for space-saving work Transportation possible for an extra charge! Iodpfezfilwox Alxeif Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, functionality: fully functional, Year of construction: 2004, Hydraulic Guillotine Shear Make: ERMAKSAN Model: HGS 3100x6 Year: 2004 Technical Data: Manufacturer: ERMAKSAN Model: HGS 3100x6 Year of Manufacture: 2004 Sheet Width: 3,100 mm Sheet Thickness: 6 mm Cutting Angle: 1.2° Strokes per Minute: 18 Number of Hold-Downs: 15 Motor Power: 11 kW Back Gauge: 1,000 mm Space Requirement: L 3.8 x W 2.2 (plus support arms) x H 1.6 m Machine Weight: 5.5 t Equipment: • Angular stop • Support arms • Programmable 1,000 mm back gauge via ELGO controller • Automatic blade gap adjustment • Pneumatic sheet support device • Cutting length limiter Ijdpfx Ajxrtxuolxjif • Folding finger guard • Light barrier for rear area safety All information is provided without guarantee. A powered demonstration is available at any time in our showroom.

Condition: good (used), functionality: fully functional, Year of construction: 1990, We are selling a used guillotine shear from Stanko with a cutting width of 2000mm and a material thickness of 6mm. The machine is powered and can be tested. Crane loading is possible. Isdowywmhopfx Alxoif

Condition: new, Hydraulic shear MVD 3100 X 6 mm complete with pneumatic sheet support at the rear Cutting capacity for 450N/mm2 material: 6 mm Cutting capacity for 700N/mm2 material: 4 mm Cutting length: 3100 mm Distance between uprights: 3330 mm Fixed cutting angle: 1.9° Sheet clamping cylinders: 14 Strokes per minute: 18–23 Throat: 250 mm Motor power: 10 kW Graduated square and two sheet supports: 1000 mm Rear gauge stroke: 1000 mm with PNEUMATIC SHEET SUPPORT. Iiodpfx Aljfh R Igjxof Approximate weight: 6000 kg

Condition: repair required (used), functionality: not functional, Circular shear, capacity 1500 x 6 mm, pneumatic system needs to be completely or partially renewed. Isdpfxezq Sqaj Alxsif

Condition: like new (used), Year of construction: 2004, operating hours: 6,090 h, load capacity: 8,000 kg, lifting height: 5,700 mm, fuel type: electric, mast type: duplex, construction height: 4,100 mm, Manufacturer + model: KALMAR ECE 80 - 6 Mast: 2F5750 ID: 24051.5020 Category: Used Mast: 2F5750 Forks: 2400 mm Lowered height: 4100 mm Lifting height: 5750 mm Capacity: 8000 kg Year: 2004 Operating hours: 6090 hrs Iiodezuubvspfx Alxof Battery: 80 V / 1550 - NEW - Mfg. 09/2024 Options: - FULL cabin - LINDE steering - Duo pedal!!! - Spreader / S.s. - Spotlight - Duplex FFL mast - Completely NEW -> FEM 4 A - FORKS

Condition: excellent (used), Year of construction: 2008, operating hours: 1,000 h, functionality: fully functional, feed length X-axis: 240 mm, feed length Y-axis: 180 mm, feed rate X-axis: 30 m/min, spindle diameter: 40 mm, total width: 1,900 mm, total height: 1,800 mm, total length: 5,000 mm, overall weight: 6,000 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, workpiece height (max.): 180 mm, jointer table length: 2,500 mm, workpiece width (max.): 240 mm, input voltage: 380 V, table length: 2,500 mm, number of spindles: 6, input frequency: 50 Hz, table width: 240 mm, Equipment: motor brake, 240 mm width 180 mm height 6 spindles 2 lower Iedpoztm Hujfx Alxjif 2 upper Left Right Electronic adjustment of width and the two upper heads. Chrome table Lower draw rollers Central lubrication Plate lubrication First owner 2008 model year

Condition: excellent (used), Year of construction: 2017, Arburg 370E 600-170 with Arburg Multilift Select robot / All-electric injection molding machine Year of manufacture: 11.2017 Injection unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosage volume: 85 ccm Clamping unit: Clamping force: 60 t Tie bar spacing: 370x370 mm Platen size: 510x510 mm Ejector: electric Clamping system: toggle Control system: SELOGICA - touchscreen Iiodpfx Alszc Nm Roxof Additional equipment: Production line with Arburg Multilift Select robot and conveyor belt All-electric machine: high-speed, energy-efficient, and very quiet Operating hours: h in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 24 zones Hardened injection unit – bimetallic Main motor: servo-driven with inverter for energy saving Injection unit driven by servo motor controlled by inverter Parallel movements Central lubrication Machine with two cylinders / nitrogen accumulator (extra charge for high-speed operation) Integrated Arburg conveyor belt and sorting flap Arburg Multilift Select robot, 6 kg, transverse Year of manufacture: 11.2017 4-axis robot: 3 axes servo-driven (electric), C axis pneumatically driven Stroke (axes): X-600, Y-800, Z-1800 mm Robot safety package Robot with adapter and safety housing Purchase of robot and conveyor belt possible at additional cost Dimensions: Weight: 3600 kg Length/width/height: 4.00x1.45x2.04 m All offered machines are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical demonstrations at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2007, total height: 1,200 mm, total length: 3,600 mm, total width: 1,480 mm, Colour: Grey - Machine available from: 2025-12-15 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes Iedpjx Ei Sysfx Alxsif - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, DEMAG rope pulleys / rollers - 19 pieces: 6 pieces diameter 180 mm. / inside 40 mm. 2 pieces - 260 mm. / 45 mm. Iiedpju U Rayofx Alxef 6 pieces - 260 mm. / 90 mm. 1 piece - 310 mm. / 90 mm. 4 pieces - 410 mm. / 90 mm.

Condition: excellent (used), Manufacturer: Indramat spindle motor with Emag spindle Type: 1MB 310 D-6DB-A094A1/SO20 Rotor: 1MR 310 D-A094/SO20 Iijdpfov U Ag Dex Alxjf Stator: 1MS 310 D-6B-A1/SO20 Pn 19 kW P kb 27 kW n N 700 rpm n max 6000 rpm Condition: Used, fully functional 2 units available in stock.

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 Iedpszbcwmjfx Alxsif The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs Iiodpfx Aew Hpzwelxef

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate Isdsliugmepfx Alxjif -Welding table: clamping plate with T-slots on a solid base frame with vice -Bottom: with cooling fins -Table surface: 2010 x 650 mm -Groove width: 19 mm -Groove spacing: 130 mm -Overall dimensions: 3170/860/H1060 mm -Weight: 880 kg

Condition: used, BEYELER PR 6 1000 KN x 2050 MM is a Bending center engineered for precision, high accuracy and reliability. Working capacities: workspace 2050 mm, shearing/pressing force 1000 kN, number of axis total 6, lifting height 415 mm. Technical specifications: air connect max. 8 bar, voltage 50 Hz 3x 400 Volt, total installed power 7.5 kW, machine's weight about 8’000 kg. Enables achievement of tight tolerances; typical application sectors: automotive, aerospace, medical, machine tools, watchmaking Isdjzqbi Eepfx Alxsif

Year of construction: 2001, condition: ready for operation (used), Various lettershop and paper converting units are available. 1) MBO ET46 corner conveyor table, year of manufacture: 1991. 2) MBO ET46 corner conveyor table. 3) MBO Z2 knife folding unit. 4) Herzog + Heymann knife folding unit, year of manufacture: 2001. 5) MBO T45-2-X knife folding unit. 6) Böwe 310 Systec cutting module. 7) Nagel Citoborma 490 Vario SBT multi-spindle paper drilling machine. 8) Hunkeler paper unwind stand. 9) Herzog + Heymann shingle delivery, year of manufacture: 2001. 10) MBO FWIII 52/4 folding unit. 11) MBO T45-2-45/4 folding unit. 12) MBO FWIII 52/6 folding unit. 13) Hunkeler ARAW 50/20 paper unwind stand. 14) Böwe separating cutting module. 15) Herzog + Heymann 2-pocket folding unit, year of manufacture: 2006. 16) Herzog + Heymann 4-pocket folding unit, year of manufacture: 2001. An on-site inspection is possible. Iiodpfx Aoziphaslxjf

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment Ijdpfxjg R Sh As Alxsif

Year of construction: 1985, condition: excellent (used), strip width: max. 1.500 mm strip thickness: 0,3 - 2 mm coil weight: 6 t Ijdpfx Alenfu Icsxjif mandrel Ø: 508 mm No. of slits: max. 9