Used Alpha Tec -- Alphatec Rps 5000 for sale (8,145)

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Nedpfx Aedzqptjlhjcu Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Demonstration line, Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Ncedpfx Alei Dtb Aeheu Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Ncjdpfx Aed Sg Hrolhou Mire extruders ex our machine-stock Wuppertal Germany available.

Year of construction: 2022, condition: as good as new (ex-display), strand-pelletizer type Alphatec AS-G 200 Rotor width 200 mm ᐳ hard-metall cutting rotor Nodpfx Alecpg Rqohocu drive 7,5 kW - AC speed frequency controlled Capacity 700 kg/h - depending material specifications More strand-Pelletizers ( ST ) ex stock Wuppertal-Germany available, ask for our most recent stock-list or visit us, you´re welcome

Year of construction: 2025, condition: new, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D Njdpfsd Hqa Isx Alhocu R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired Nodpfx Aoi Dtbijlhscu OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Nedpfx Alsi Dtbuehocu Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Ncedpfxoi Dtbqe Alhju Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Condition: ready for operation (used), A Moving Die Rheometer Alpha for rheological testing and vulcanization analysis of rubber compounds is available. Test standards: ASTM D5289/ISO6502, max. temperature: 200°C, frequency: 1667Hz, strain: 0.2°/0.5°, test pressure: 8000kPa. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Ncjdoxrukljpfx Alhou

Condition: ready for operation (used), An Alpha viscometer for testing raw elastomers and rubber compounds is available. Test standards: ASTM D1646/D3346, max. temperature: 200°C, rotational speed: 2rpm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Ncjdpfx Ajxrukrolheu

Condition: refurbished (used), Available rubber testing equipment Ncedpfxswmnlhs Alhju 1 x Alpha Production MDR Rheometer (optionally in container with pneumatic sample punch) The device has been inspected, calibrated, and equipped with new software on a new tower PC!

Condition: new, Year of construction: 2025, Protec Welding Turntable, 5000 kg load capacity Njdjid Szcjpfx Alhscu Variable speed control, 0.05 - 0.5 RPM Handheld remote control Height: 600 mm Diameter: 1500 mm Foot pedal remote control available at an additional cost.

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 5,000 kg, Column lift turning device 5000 kg, 3000, 1000 load capacity Positioner Sideros Syncrolift Ncjdpfxouk Niyj Alhou Double column Radio remote control (wireless) Year of construction 2024 Load capacity 5000 kg Minimum working height: 1100 mm Maximum working height 1600 mm Speed 0.5 rpm Vertical adjustment 500 mm Clamping plate diameter 1000 mm Rotation 2.2 kW Lifting motor 2 x 2.2 kW Various column lifting and turning devices are available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Condition: as good as new (ex-display), Year of construction: 2023, Welding rotary table Protec KT 5000 HV Complete set including hand-held and dual-pedal remote control Digital display for speed Hydraulic height adjustment Dimensions: minimum tilted height: 800 mm Njdpfoficr Usx Alhecu maximum tilted height: 1900 mm minimum horizontal height: 1050 mm maximum horizontal height: 2000 mm diameter of the clamping disc: 1500 mm length: 2900 mm, width: 1400 mm weight: 3200 kg speed: from 0.01 to approximately 0.7 RPM.

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Complete set including hand and double-foot remote control Digital speed display Nedpfol Dq U Ujx Alhscu Hydraulic height adjustment Dimensions: Tilt height min: 800mm Tilt height max: 1900mm Horizontal height min: 1050mm Horizontal height max: 2000mm Clamping disc diameter 1500mm Length 2900mm, width 1400mm Weight 3200 kg Speed from 0.01 to approx. 0.9 rpm. CE certified

Condition: new, Year of construction: 2024, Protec KT 5000 welding rotator table Complete set including dual foot pedal control and hand-held control with digital display 5000 kg load capacity Diameter of clamping plate: 1500 mm Height in horizontal position: 1500 mm Height in tilted position (to center): 1500 mm Speed continuously adjustable from 0.01 to approx. 0.7 RPM Tilt up to 120° Length: 2100 mm Nsdpfxefkt Ebo Alhocu Width: 1500 mm

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Single-column lifting and rotating device, 5-ton load capacity, mono, mobile, lifting and turning. Protec turning device / positioner Syncrolift. Drive column with adjustable height, remote control (wireless and manual). Electric column adjustment with powered travel carriage. Load capacity 5,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Speed: 0.5 rpm. Clamping plate diameter: 900 mm. Rotational drive: 2.2 kW. Njdpfox Thnpox Alhjcu

Condition: new, Year of construction: 2024, 5000 kg load capacity welding turntable, very robust Speed continuously adjustable from 0.05 to 0.7 RPM Turntable diameter 1500 mm Tilt up to 135° Height in horizontal position 1660 mm, tilted to the center 1440 mm Length 2.4 m x Width 1.48 m Ncedpfxsig T A Rj Alheu with remote control

Condition: new, Year of construction: 2022, Welding rotary table Protec KT 5000 HV Complete set including hand-held and dual-pedal remote control Digital display for speed Hydraulic height adjustment Dimensions: minimum tilted height: 800 mm maximum tilted height: 1900 mm minimum horizontal height: 1050 mm maximum horizontal height: 2000 mm diameter of the clamping disc: 1500 mm Ncjdpfx Aleig T Eaohju length: 2900 mm, width: 1400 mm weight: 3200 kg speed: from 0.01 to approximately 0.7 RPM.

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Single-column lifting and rotating device, 5-ton load capacity, mono, mobile, lifting and turning. Protec turning device / positioner Syncrolift. Drive column with adjustable height, remote control (wireless and manual). Electric column adjustment with powered travel carriage. Load capacity 5,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Speed: 0.5 rpm. Clamping plate diameter: 900 mm. Rotational drive: 2.2 kW. Njdpfx Alew H R I Eohocu

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Column Lifting Rotating Device with 5-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Ncedpfx Alowak U Ejhou Load Capacity 5000 kg, 360° Minimum Working Height: 700 mm Maximum Working Height: 1600 mm Speed: 0.5 rpm Clamping Plate Diameter: 700 mm Rotating Motion: 1.1 kW 2 to 10-Ton Capacity Available Upon Request

Year of construction: 2021, condition: excellent (used), Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment dimensions: height tilted min: 800mm height tilted max: 1900mm height horizontal min: 1050mm height horizontal max: 2000mm Njdpom Ew Stsfx Alhscu diameter of the clamping disc 1500mm length 2900mm, width 1400mm weight 3200 Kg speed from 0,01 to approx. 0,7 rpm.

Condition: used, Year of construction: 2022, Koh Young Machine AL-SL-00713 1. LZALPHA L-S-20-4W-L-6.5M  1  AL-SL-00713 Zenith Alpha HS L-Size Single Lane 4W/8M L→R 20um L (Lean) Platform Platform: L (Lean) Platform (standard version) Type: Zenith Alpha, L-Size Camera Resolution: 20 microns Projection: 4-way grating projection Camera: 6.5 Megapixels Illumination: IR-RGB LED Operating System: Microsoft Windows 10 IOT Enterprise LTSC (Standard) Conveyor: Single lane Conveyor Type: Front fixed (Standard) Nodpfxox Tzhpe Alhjcu Conveyor Belt Type: Timing belt - ESD (Standard) Conveyor PCB Transfer Height: 870–950 mm (Standard) Conveyor PCB Direction: L→R (Standard) Max. PCB Size: 490 × 510 mm (front fixed, Standard) Min. PCB Size: 50 × 50 mm PCB Thickness: 0.4–5 mm ESD: Standard + Extended Safety Option CE Declaration: English (Standard) Specification conforms to standard setup System Dimensions (W×D×H): 1000 × 1295 × 1627 mm HS Code: 9031.4990 Country of Origin: Republic of Korea 2. 803020-009105  1  to AL-SL-00713 AOI REVIEW STATION (REVIEW STATION SET, WINDOWS 10) Includes DELL XE3 PC with Windows 10, monitor, and keyboard HS Code: 8471.4900 Country of Origin: People's Republic of China 3. 101020-003007  1  to AL-SL-00713 UPS OPTION AOI_SPI (SMT750) APC – C-platform HS Code: 8504.4030 Country of Origin: Philippines

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, bending radius (min.): 9 mm, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch Nodpjndn Agsfx Alhjcu OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Year of construction: 1990, operating hours: 443 h, condition: used, 1990 | Extec 5000 | Used Screen | 443 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 16000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Ncsdpoyambgjfx Alhou 58 inspection points 43 approved ✅ 5 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the screen. The engine compartment protective covers are not mounted; however, the seller has them and they will be included in the sale. The tensioning and folding cylinder of the walls do not work. No presence of stabilizer. The condition of the belts is good, some appear dry and the connections are sometimes damaged. Wear on the Matic tires is significant. Engine starts with a booster. The electrical part does not work. Presence of seepage on an actuation valve for movements. The paint is damaged in some areas. The exhaust outlet is not secured. The starting battery is out of service. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40008 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.