Used Arisa S-2-400-160-Fs for sale (1,12,479)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Total press force: 16,000 kN Force application point before the PMI: 18 mm Number of strokes adjustable continuously in automatic mode: 10 - 22 1/min Slide stroke: 605 mm Slide adjustment: 400 mm Mold height (stroke downwards, adjustment upwards): 1300 mm Table dimensions: 4500 × 2300 mm Slide dimensions: 4500 × 2300 mm Table height from the ground: 600 mm Table stroke: T-Track Transfer stroke: 0 - 1200 mm Internal clearance of the guide shoulder for the clamping pins (min.): 800 mm Internal clearance of the guide shoulder for the clamping pins (max.): 2400 mm Lifting stroke: 0 - 280 mm Cushions in the base (hydraulic): 2 pcs. Positioning of both cushions: Motorized and adjustable Cushion force: 300 - 2000 kN Cushion stroke: 0 - 250 mm Cushion surface area: 1600 × 950 mm Pneumatic cushion in the slide: 2 pcs. Cushion force in the slide: 55 - 550 kN Maximum cushion stroke in the slide: 150 mm Left slide cushion surface area: 1450 × 1600 mm Right slide cushion surface area: 1300 × 1600 mm Maximum weight of the upper part of the mold: 36,000 kg Maximum total weight of the mold: 40,000 kg Technical data for the CISAM line: • Strip width: 300 - 1600 mm • Strip thickness: 0.5 - 3.0 mm • Tensile strength: 600 MPa Chedpfxszldwus Aptjb • Yield strength: 400 MPa • Feed rate: 200 - 1300 mm • Feed accuracy: ±0.1 mm • Maximum feed cross-section: 4,000 mm² • Strip entry height above the table: 500 - 800 mm • Maximum coil weight: 25,000 kg • Coil outer diameter: 900 - 1,855 mm • Mandrel expansion range: 500 - 610 mm • Nominal coil inner diameter: 610 mm • Straightening rollers: 9 pcs. • Straightening unit with cassette construction

Condition: excellent (used), functionality: fully functional, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,900 mm, total width: 700 mm, total height: 1,000 mm, overall weight: 750 kg, SAC FS 400 Planer | 4-knife surface planer! Excellent condition! SAC FS 400 Planer | 4-knife surface planer! EXCELLENT CONDITION! Machine from an Italian manufacturer. TECHNICAL SPECIFICATIONS: - Table length 2900 mm - Working width 430 mm - 4 traditional knives - 3kW motor - Shaft rpm 5000 - Shaft diameter 120mm - Both tables are adjustable - Stable, solid fence - Shaft damping system Machine dimensions: Cedpfx Aozqlqmsptjhb - Length 290 cm - Width 70 cm - Height 100 cm - Weight 750 kg WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.239, 🛠️ Heavy-Duty Portal Milling Machine WALDRICH SIEGEN Type V/H-FR A heavy-duty and powerful portal milling machine from WALDRICH SIEGEN is offered for sale, ideally suited for machining large and heavy workpieces. The machine comes from a renowned German manufacturer and impresses with its extremely robust construction, high base precision, and excellent suitability for modernization. 💡 Special Feature The machine is sold as-is (not overhauled) and therefore offers an ideal opportunity for customer-specific modernization (e.g. new CNC control, electrics, measuring systems) – perfect for buyers who want to implement their own solution. ⚙️ Highlights ✅ Portal design with fixed cross rail for maximum rigidity ✅ High performance: 58 kW main drive ✅ Speed range up to 1,800 rpm ✅ Two machine tables with automatic coupling ✅ Extremely high load capacity up to 100 tons ✅ Ideal for retrofit / CNC upgrade ✅ Perfect for heavy-duty machining 📊 Technical Data 🔹 Clamping surface per table: 2,500 x 4,000 mm 🔹 Clamping surface (coupled): 2,500 x 8,700 mm 🔹 Max. workpiece weight: ➡️ per table: 50 t ➡️ coupled: 100 t 🔹 X-axis travel: up to 9,503 mm 🔹 Y-axis travel: 5,515 mm 🔹 Z-axis travel (ram): 1,000 mm 🔹 Spindle power: 58 kW 🧰 Equipment ✔️ Tool changer (chain magazine, 60 positions) ✔️ Angle heads (RAA), including universal angle head ✔️ Spindle extension ✔️ Chip conveyor ✔️ Automatic accessory changing system 📍 Location Germany 👁️ Inspection Chodpfsdkmihex Aptob Inspection possible at any time by appointment 📦 Availability Available at short notice 📩 Contact Contact us now for further information, pictures, or a customized offer!

Year of construction: 2006, condition: ready for operation (used), A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible. Chsdpfxoy I Ac Ds Apteb

Condition: excellent (used), Year of construction: 2014, We are offering for sale these two Bosch UL-S 14000 steam boilers, which are in very good condition. They were manufactured in 2014. Manufacturer: Bosch Chedpfxozg Nt Dj Apteb Type: UL-S 14000 Year of manufacture: 2014 If you have any questions or require further information, please do not hesitate to contact us.

Condition: new, For sale: New Siemens electric motor Motor unused, warehouse condition No signs of use, fully operational, ready for work Technical data: Manufacturer: Siemens Model: 1LE16032AA434AB4 Z Power: 30 kW Rotational speed: approx. 2955 rpm Voltage: 400/690 V Frequency: 50 Hz Protection class: IP55 Energy efficiency class: IE3 Mechanical size: 200L Mounting type: B3 Cedpfx Ajyv Inuoptshb Robust industrial construction Ideal for industrial machinery, pumps, fans, and drive systems

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Chsdsyab Nfopfx Aptjb

Condition: excellent (used), Year of construction: 2012, Arburg 520S 1600-400/170 e² / Production line with Geiger robot Year of manufacture: 2012 Injection unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Dosage volume: 154 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Control system with 12 hot runner zones Reinforced injection units – bimetallic Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast operation) The machine features a built-in servomotor in the injection unit responsible for dosing the plastic Chjdpjzc N Tqofx Apteb Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg brand conveyor belt and sorting flap Original Weber brand rotary table, highly precise – electrically driven (integrated inverter in the machine) Rotary table and robot available as an additional purchase Dimensions: Weight: 8140 kg Length/Width/Height: 4.81 x 1.84 x 3.45 m All offered machines are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided, or you can participate in live technical tests at our facilities in Łódź. Price: On request

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Chjdpfxeyab I Uo Apteb

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Cedpfx Apoxl Elgstjhb

Condition: excellent (used), Year of construction: 2003, Bed milling machine, lightly used with approximately 4000 hours. XYZ: 2000 x 1000 x 1000 mm Heidenhain: 530 TNC with HR 410 handwheel Spindle: 2.5 x 2.5 degree double swivel, 4000 RPM, ISO 50 Options: Temperature cooler Coolant chiller Linear scale in Y-axis IKZ 15 bar External cooling with 500 l ATC with SK 50 Chedpfx Apezt Sv Ujtob CNC rotary table with 600 mm diameter ZF gearbox Renishaw MP 10 Chip conveyor (longitudinal) Foot pedal Coolant control cabinet

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Chedpfxszlaits Aptsb Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication – Additional safety guards – Operating tools – Press plate

Condition: excellent (used), Year of construction: 2001, operating hours: 8,155 h, functionality: fully functional, feed length X-axis: 1,800 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, table width: 850 mm, table length: 2,000 mm, overall weight: 13,500 kg, power: 30 kW (40.79 HP), CME FS-2 bed milling machine with only 8155 hours control Heidenhain 426B incl measuring probe and complete set of manuals Chedpfequqq Ajx Aptjb

Year of construction: 2023, condition: like new (used), Wittmann TP-PLUS-D-2:M160 (2023) Model: Wittmann Tempro TP-PLUS-D-2:M160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (option 12–16 kW) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized) Cooling: Plate heat exchanger, cooling water connection G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Chodpfx Apsxykn Njtsb Control accuracy: ±0.2 °C Zones: 2 completely independent circuits Standard features: Automatic filling, pressure monitoring, leak-free pump, SSR heating, pump rotation control, mold purge Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 100–120 kg

Condition: ready for operation (used), Year of construction: 2021, operating hours: 67 h, clamping force: 1,600 kN, screw diameter: 45 mm, overall weight: 5,900 kg, controller manufacturer: ARBURG, controller model: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) Codpfx Asx D E Dysptshb • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information • Screw Diameter: 45 mm • Injection Pressure (Max.): 1580 bar • Shot Weight (Max. g PS): 232 g • Heating Output 9.7 kW | 5 zones • Net Machine Weight: 5900 kg

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp Equipment: - Loading ramp - 8x Tie-down points - Loading angle 16° Net: €4,785.72 / Gross: €5,695.00 Article number: MBA235401800.01 Technical data: • Brand: Martz • Model: BAU-3 400/2 S • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 400 x 182 x 25 cm • External dimensions (LxWxH): 601 x 242 x 182 cm • Loading height of the floor: 34 cm • Permissible total weight: 3,500 kg • Tare weight: 695 kg Chsdpfx Aszy Avroptjb • Payload: 2,805 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders, walkable, with continuous safety anti-slip strips • Screen-printed plywood floor, continuous without joints, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Steel loading ramp, standing on a shaft • Stable eccentric locks • Insertion option at all 4 corners for tarpaulin frames, grid attachments, sideboards or front wall extension • Robust support feet on the loading ramp • Lifting aid for the loading ramp • Very low chassis for a low loading angle • With bucket rest • 8x tie-down points recessed in the frame profile (600dAN/kg), TÜV certified • Maintenance-free rubber spring axles from KNOTT • Reversing aid • KNOTT overrun device and parking brake • Very stable screwed V-drawbar, REINFORCED • 13-pin plug • Reversing light • Large-sized safety lighting • Rear position lights • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are reserved.

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Cjdpfew Rqwtox Aptehb

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Chedpezu T Smefx Apteb Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Year of construction: 1999, condition: defective spare-parts repository (used), functionality: limited functionality, machine/vehicle number: T4-0899, Excel-Csepel DFS 380 lathe (T-400/600) with Sinumerik 810D/CNCkon, year of manufacture 1999 – machine for hobbyists Condition: operational, but for sale only as a hobbyist/repair machine – no guarantee of continuous functionality Year of manufacture: 1999 Location: Western Saxony Price: negotiable Technical data: Manufacturer: Excel Csepel Machine Tools Ltd. (Hungary) Type: DFS 380, nameplate designation T-400/600 Machine No.: T4-0899 Control: Siemens Sinumerik 810D with CNCkon Csdpfszw Ea Iox Aptohb Total connected load: 30 kW Connection values: 3×400 V / 50 Hz, control voltage 230 V AC / 24 V DC Max. turning diameter over bed: 535 mm / over slide: 380 mm Travel X: 230 mm, Z: 1,115 mm Main spindle drive: 18.5 kW (100% duty cycle), speed 35–3,500 rpm Spindle head A8 according to DIN 55026, spindle bore 82 mm, max. bar diameter 70 mm Feed axes: FANUC AC servo motors, rapid traverse X 15 m/min, Z 20 m/min Turret: TOEM 200 „06“, 12 tool positions, tool holder DIN 69880, Ø 40 mm Tailstock: hydraulic, stroke 150 mm, internal taper MK4 Weight: approx. 8,300 kg, dimensions L×W×H: 3,690 × 1,750 × 1,900 mm Condition/Special features (technical honesty): The machine is fundamentally operational and, thanks to the integrated correction electronics (CNCkon), is in principle very accurate. However, this accuracy is impaired by existing spindle play (approx. 2–3 hundredths of a mm). The machine is therefore primarily suitable for experienced buyers who are willing to repair or rework the spindle play themselves. Therefore, it is explicitly sold as a hobbyist/self-repair machine, without any assurance of permanent production suitability. Description: For sale is an Excel-Csepel DFS 380 lathe (nameplate T-400/600), year of manufacture 1999, with Siemens Sinumerik 810D control and CNCkon correction electronics. The machine is functional and runs, but has a spindle play of approx. 2–3 hundredths of a mm, which limits the achievable accuracy. Suitable for technically skilled buyers or as a hobbyist/spare parts machine. Further technical data see above. Inspection at the location in Western Saxony possible by arrangement. Sold without guarantee and warranty, negotiable. Other machines available from site clearance Site takeover negotiable

Condition: excellent (used), Year of construction: 2010, operating hours: 44,600 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 570S2200-400/170e² Baujahr: 2010 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Chsdpfou E E H Sex Aptjb Hubvolumen: 59 cm³ Spritzteilgewicht: 47 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun

Condition: excellent (used), Year of construction: 2010, Clamping force: 160 t Screw diameter: 30 mm Screw diameter 2: 18 mm Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm 1x core puller Cjdpfezyp A Sox Aptjhb 9x hot runner controler Type: Multicomponent Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 600 mm, turning diameter: 570 mm, spindle bore: 79 mm, Error message: Actuator not operational Cedpox Sw Uvofx Aptehb lots of accessories

Condition: used, Year of construction: 2003, operating hours: 40,009 h, functionality: fully functional, machine/vehicle number: 211, Technical Specifications (CME FS-2) Working Table: Table clamping surface: 2000 x 850 mm Maximum permissible table load: 3500 kg T-slots: 1 x H-7 / 5 x H-10 (slot spacing: 100 mm) Travels and Feeds: X-axis travel: 1800 mm Y-axis travel: 1000 mm Z-axis travel: 1000 mm Working feed rate: 5 - 5000 mm/min Rapid traverse: 20,000 mm/min Spindle and Drive: Spindle motor power: 22 kW Chodpfxoztrt Ho Apteb Spindle taper: ISO-50 / DIN 69871 Spindle speed range: 50 - 4000 rpm Accuracy and Construction: Positioning accuracy (3 axes): +/- 0.005 mm Repeatability (3 axes): +/- 0.005 mm Ball screws (X, Y, Z): diameter 50 x pitch 10 mm Total machine weight: 13,000 kg (13 tons) Auxiliary Drive Motors: Hydraulic motor power: 1.1 kW Lubrication motor power: 0.4 kW Coolant pump motor power: 0.3 kW

Condition: excellent (used), Miyachi Unitek HF25 DC Resistance Welding System controller. The unit is fully functional, starts up correctly, the display works, and all functions respond as expected. The screen displays the message “EMERGENCY STOP – OPERATOR ACTIVATED,” which indicates that the emergency stop circuit has been activated – this is not a malfunction of the device. This model is designed for precise control of the DC resistance welding process. It features a clear display, numeric keypad, the ability to program welding parameters, and RS-232 and RS-485 communication interfaces. Power supply: 380–400 V AC, 50/60 Hz. Technical specifications: Manufacturer: Miyachi Unitek Model: HF25 Type: DC Resistance Welding System Power supply: 380–400 V AC, 50/60 Hz Max. output current: 2400 A RMS Max. open-circuit voltage: 10 V Interfaces: RS-232, RS-485 Inputs include: FOOT SWITCH, AIR VALVE DRIVER, VOLTAGE SENSE, WELD HEAD Condition: Cedpfx Apszma Sdstjhb Fully functional. Visual condition matches the photos – normal signs of use. The power cord has been repaired (insulated area visible in the photos). The repair does not affect the operation of the device, but this information has been included for full transparency of the sale.

Condition: reconditioned (used), Motor 5 kW electric height adjustment with digital display brake can be released electrically for knife change planer cutter shaft 520 mm manual feed speed 5-8-12-18 m/min start and stop buttons at front and rear planer table length 2250 x 540 mm manually adjustable fence with angle function Chsdpfx Aey Hkzfoptob sliding planer shaft guard