Used Atlanta Mobile Wrapping Machine for sale (69,218)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS06, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) Bsdpfjyktv Sjx Abtjdg - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Bjdpfx Aoykty Djbtodg FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25SFERA06, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height Bdodpfx Asykua Sjbtog F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Bjdpfxoykuhpj Abtsdg Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Condition: good (used), EKH-455 Shrink Wrapping machine Machine ready to use. Bdjdszur Adspfx Abtsg Photos show the actual product. Description: The main advantages of shrink wrappers include simultaneous sealing and shrinking, small dimensions, and easy portability. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They offer adjustable sealing time and heater temperature, and can also shrink PVC and polyolefin films. Technical Specifications: Power Supply: 230 V Power: 3.77 kW Maximum Product Dimensions: 520 x 390 x 250 mm Sealer Dimensions: 550 x 420 mm Weight: 125 kg

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specifically designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Bsdpfxjzxgglj Abtjdg Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm, and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand operated.

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Bodpfszx A Apjx Abtjdg FABO ME Series mobile sand screening plant is an ideal solutions for the classifying materials which was provided as pre-crushed. Most important advantage of plant is having all equipment on only a single chassis. Transportation can be done by only one truck. TECHNICAL SPECIFICATIONS: - Hopper: 9 m3 - Plant Dimensions: 14130x4600x4160 mm - Production Capacity: 200-300 Tons Per Hour - Vibrating Screen and Deck: 2000x5000 (4 decks) - Total Motor Power: 65 Kw - Generator (optional): 100 kvA ME-2050 IS A COMBINATION OF: • Bunker (Hopper) • High Stroke Vibrating Screen • Folding type feeding and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), IML DA 900 Rigid Box Automatic Wrapping Machine This machine is practically new. Year of manufacture: 2016. Application: Wrapping veneer on a box. Made in Italy. This automated machine is designed for forming solid board boxes by wrapping veneer on a solid board box. This is the latest version of the machine, with a PLC controller. Technical specifications: Max size: 430mm x 350mm x 120mm Min size: 60mm x 60mm x 10mm Version thickness: 100-175gsm Weight: 900kg Power supply: 230V Bdedpfx Aszw Ty Njbtog The set includes two tool palettes for producing standard boxes. The molds are primarily made using 3D printing technology.

Year of construction: 2026, condition: new, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MEY Series mobile sand screening and washing plant is an ideal solutions for the classifying and washing of materials which was provided as pre-crushed. Most important advantage of plant is having all equipment on only a single chassis. Transportation can be done by only one truck. TECHNICAL SPECIFICATIONS: - Hopper: 8 m3 - Plant Dimensions: 13500x4500x3600 mm - Production Capacity: 120-200 Tons Per Hour - Screw Washer Size: 600x6000 mm Double Helix - Vibrating Screen and Deck: 1600x4500 (4 decks) - Total Motor Power: 68 Kw - Generator (optional): 130 kvA MEY-1645 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Screen with Washing Nozzles • Double Helix Screw Washer • Folding type feeding and stock conveyor belts • Hydraulic feet Bdodpfoy Twqmex Abteg • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Mobile delivery for folding machine Heidelberg SAK-66 Fully operational, ready for production. Manufactured in Heidelberg, Germany. Brand new belts. Can be connected to any Heidelberg folding machine, with smooth delivery speed adjustment. Bdsdozvgkrspfx Abteg Height and angle adjustment.

Year of construction: 2011, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 8000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 2000 x 2000 mm TRANSVERSAL TRAVEL OF THE TABLE: 1500 mm MAX ADMITTED LOAD: 15000 Kg HEAD: A/B AXIS AUTOMATIC ; CONTINUOUS ; ISO 50 ; 7000 rpm; 49 kW; 1180 Nm TOOL MAGAZINE: CHAIN-TYPE ; 80 POS CONTROL UNIT: HEIDENHAIN iTNC 530 ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER NOTE: WITH ROTARY TABLE 1500X1500 mm; MAX ADMITTED LOAD 15000 Kg Bsdpfx Abewl R Agotjdg

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0488, KEBER Palletizer & Wrapping machine [Year : 1997 sn : 0488 Model :101 ] ~ 1700 packets / h Wrapper [Year : 1997 sn : 0487 Model :MEC ARM] Machines are operation. ALSO FOR SALE : Bodotgmwropfx Abtodg Palletiser - ACMI - RASAR P135 H - €49,000 2000 Year ACMI s.r.l Palletiser with wrapper used for 5000ml PET bottles & EUR pallets C-1581 Serial No

Year of construction: 2004, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH ROTARY AND SHIFTING TABLE LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1250 mm VERTICAL TRAVEL: 2000 mm RAPID FEEDS L-T-V: 20 m/min TRANSVERSAL TRAVEL OF THE TABLE: 2000 mm PALLET: 2000 x 2500 mm; 1200 rpm MAX ADMITTED LOAD: 28000 Kg Bdjdpfxjwlwhce Abteg HEAD: A/B AXIS AUTOMATIC ; ISO50 DIN ; 15-4000 rpm; 30 kW; 650 Nm TOOL MAGAZINE: CHAIN-TYPE ; 41 POS CONTROL UNIT: FIDIA C20 XPOWER HIGH PRESSURE COOLANT: 12 Bar ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; LASER TOOL SETTER

Year of construction: 1997, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD Bdodpfx Ajh Stzkobtsg LONGITUDINAL TRAVEL: 4000 mm TRANSVERSAL TRAVEL: 1200 mm VERTICAL TRAVEL: 2000 mm RAPID FEEDS L-T-V: 15 m/min TABLE SIZE: 5000 x 2000 mm SPINDLE: 4000 rpm; 27 kW; 1200 Nm HEAD: A/B AXIS AUTOMATIC ; A 2,5°- B 2,5° ; ISO 50 ; 4000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 30 POS CONTROL UNIT: SELCA S3045 WEIGHT: 25500 Kg ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: EXTENSION 400mm -ISO50 -6.500rpm; AUTOMATIC HEAD EXCHANGE; PERIMETER GUARDING

Condition: used, Year of construction: 2015, Overview This Atlanta Giotto is a single-lane wrap-around case packer for end-of-line carton packaging of PET bottles, rated at more than 20 cartons per minute. It erects the wrap-around case around the bottle group from a flat blank held in an inclined magazine, and closes it with a hot-melt glue unit. Neutral and printed carton both run on the machine. The machine was built in 2015 and ran on a mineral water bottling line until early 2025, packing 1.5 l PET bottles in 4 x 3 cartons and 1.0 l PET bottles in 5 x 3 cartons. It was operated alternately with a shrink-film bundling process, so its operating hours are low. Control is a Siemens S7 PLC with a touchscreen HMI panel. Infeed and outfeed conveyors, motorisation and the CE control panel are part of the machine. Technical data - Manufacturer: Atlanta Bedpfx Ajzxtyrobtodg - Model: Giotto - Year of manufacture: 2015 - Machine type: single-lane wrap-around case packer - Capacity: more than 20 cartons/minute - Infeed: single lane, inclined carton magazine - Carton formats: 80 x H262 mm for 1.5 l PET bottles, 87.5 x H322 mm for 1.0 l PET bottles - Pack patterns: 4 x 3 bottles in 1.5 l PET, 5 x 3 bottles in 1.0 l PET - Carton: neutral or printed - Case closing: hot-melt glue unit - Control: Siemens S7 PLC with touchscreen HMI panel - Length: approx. 7,175 mm machine body, plus 1,300 mm infeed conveyor - Width: approx. 2,345 mm - Height: approx. 2,336 mm - Infeed height: min. 1,050 mm - Weight: approx. 800 kg magazine section, approx. 2,250 kg packer body - Power supply: 25 kW - Compressed air: approx. 400 Nl/min at 6 bar - Infeed belt: acetal, 685 mm wide Equipment - Infeed and outfeed conveyors - Inclined carton magazine - Hot-melt glue unit - Motorisation and CE control panel - Siemens S7 control with touchscreen panel - Electrical and mechanical drawings - Service and maintenance manuals - Spare parts books Condition Used, in very good condition with a low number of operating hours. The machine was in production until early 2025 and has since been dismantled and moved into storage. It can be inspected dismantled in the warehouse by appointment. Availability Immediately available. Location: Italy. Lifting, craning, loading and transport are available on request and are not included.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 50062, Siat WR100-M mobile robot wrapping pallets vertically, H2100, serial 50062, serial number FAMROBOTWR100, year 2006, with battery charger. This robot is in good working condition Equipped with key and 2 new batteries, new inductive side sensor. Weight: 350 kg Dimensions (L x W x H) 3.30 x 1.50 x 2.95 M Rotary plate 1500 MM DIAMETER Rotation 10 RPM DEPENDING THE SELECTED PROGRAM Reel MAX. 500 MM WIDE X 300 MM DIAMETER Film MAX. 1800 MM HIGH Pallet weight MAX. 2000 KG Pallet dimensions MAX 1000 X 1200 MM Power 1 KW MAST Wrapping height up to: 2800 mm. PS HEAD Pre stretch 250% Film stretching from 1 m to 3.5 m. Stretching occurs in the head, not on the load photocell. NUMBER OF PALLETS / 1 BATTERY CHARGING up to 120 Euro pallets: H 1800 mm. WRAPPING FUNCTIONS: 4 programs programmable by the operator: Bdjdpfxew E Epbo Abteg Up-down cycle; Up-only cycle; Down-only cycle (you can set the starting height of the cycle); Cycle for attaching a foil hood. Adjustable number of wraps at the bottom of the pallet number of wraps at the middle of the pallet; Adjustable number of wraps at the top of the pallet; Adjustable wrapping speed up to a maximum of 83 m/min; Adjustable speed of the foil trolley rising and falling; Adjustable tension force via an electro-magnetic brake; Pre stretch 150, 200, 250% Video: Price Euro 3.900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Italdibipack Mecpack FS + FornoTouch 5525EV Sealer with Shrink Tunnel Made in Italy. This machine is practically new, ready for production. Used in every industry: printing, cosmetics, confectionery, and anywhere you want to elegantly package your goods. Automatic operation: simply insert the product into the shrink tunnel, and the machine does the rest. Machine parameters are set from the control panel. Sealer dimensions: 600 x 500 mm Bdodpfxezur Dhj Abtjg Tunnel entry dimensions: 550 x 250 mm Weight: 770 kg Power supply: 380V Installed power: – sealer 2.5 kW, – tunnel 7 kW. Capacity: approx. 2,400 pcs/h Includes a short roller conveyor for product removal.

Condition: good (used), E Shrink Packaging LB-728 + LB-201 Angle Sealer with Shrink Tunnel Bdodpfx Aszur Awebtsg This machine is practically new, ready for production. Used in every industry: printing, cosmetics, confectionery, and anywhere you want to elegantly package your goods. Automatic operation: simply place the goods to be packaged on the conveyor belt, and the machine does the rest. Machine parameters are set from the control panel. Sealer dimensions: 565x460mm Tunnel entry dimensions: 370x230mm Weight: 550kg Power supply: 380V Installed power: 14 kW (total peak power, continuous operation max. 5 kW) Capacity: approx. 1560 pcs/h

Condition: good (used), DEM GP4520 APM Angle Sealer with Shrink Tunnel Made in France. The machine is in very good condition, ready for production. Used in virtually every industry: printing, cosmetics, confectionery, and anywhere you want to elegantly package your goods. Automatic operation: simply insert the product into the packaging and the machine does the rest. Machine parameters are set from the control panel, including sealing time, material feed time, sealer open time, conveyor belt speed, etc. Sealer dimensions: 470 x 555 mm Weight: 400 kg Power supply: 380V Bdsdpszurzmefx Abtjg Installed power: 8 kW Capacity: 900 pcs/h

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available Bodpfxeztwx Ue Abtsdg The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK BA1310 – Mobile Electric Pallet Strapping Machine The CORMAK BA1310 is a mobile electric strapping machine designed for securing cartons, multipacks, and other products arranged on pallets. The machine streamlines the preparation of loads for transportation or storage while reducing the number of manual operations performed by the operator. The retractable guide, which slides underneath the pallet, makes it easier to pass the strap beneath the load, reducing the need to bend down or reach into difficult-to-access areas. After passing the strap under the pallet, the operator guides it around the load and places it into the tensioning and heat-sealing mechanism. The built-in strap tensioner allows tension to be adjusted from 0–70 kg, making it possible to adapt the strapping force to the type of goods being secured. More delicate cartons can be strapped with lower tension, while heavier multipacks can be secured with greater force. The ends of the PP strap are joined by heat sealing, eliminating the need for additional buckles or clips. This reduces the number of packaging materials required and streamlines the preparation of subsequent loads for shipment. Key Benefits of the CORMAK BA1310 More efficient securing of palletized goods, easier routing of the strap underneath the pallet, reduced need to bend down or reach underneath the load, adjustable strap tension to suit different types of packaging, more stable preparation of goods for transportation and storage, heat sealing without additional buckles or clips, Bjdpfozwfpvex Abtedg compatibility with PP straps 9–16 mm wide, easy movement of the machine directly to subsequent pallets, designed for regular pallet strapping operations. Easier Strap Routing Under the Pallet The retractable guide makes it easier to feed the strap underneath the pallet and bring it out on the opposite side of the load. This solution reduces strapping preparation time and improves workplace ergonomics, particularly when regularly securing a large number of pallets. The guide helps maintain a smooth workflow without the need to manually reach into difficult-to-access areas beneath the load. Adjustable Strapping Force The 0–70 kg tension adjustment range allows the strapping force to be matched to the type of product being secured. Lower tension reduces the risk of deforming delicate cartons, while higher tension helps provide more stable securing of heavier multipacks. Correct tension adjustment improves strapping consistency and helps prevent goods from shifting during handling, storage, and transportation. Durable Connection Without Additional Buckles Heat sealing joins the ends of the PP strap without the use of metal or plastic buckles. This reduces the number of consumables required for packaging and simplifies load preparation for shipment. Transport wheels allow the machine to be moved directly to the next pallet. This eliminates the need for a dedicated strapping station or for transporting every load to the machine. Technical Specifications Technical specification Value Machine type Semi-automatic pallet strapping machine Strap type PP Strap width 9–16 mm Strap tension 0–70 kg Strap joining method Heat sealing Strap routing Retractable guide inserted underneath the pallet Table height 524 mm Mobility Transport wheels Power 700 W Dimensions 867 × 662 × 1523 mm Weight 150 kg

Year of construction: 2017, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD LONGITUDINAL TRAVEL: 3000 mm TRANSVERSAL TRAVEL: 1100 mm Bdsdpfsumpd Asx Abtjg VERTICAL TRAVEL: 1500 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 3100 x 1000 mm HEAD: CONTINUOUS ; ISO 50 ; 8000 rpm; 25/33 kW; 480/640 Nm TOOL MAGAZINE: CHAIN-TYPE ; 24 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 15 Bar WEIGHT: 30500 Kg OVERALL DIMENSIONS: 8000 x 5320 x 4265 mm ACCESSORIES: SWARF CONVEYOR ; ETHERNET PORT ; PORTABLE HANDWHEEL ; LINEAR SCALES ; THROUGH-SPINDLE AIR BLAST NOTE: LASER TOOL SETTER BLUM; TOUCH PROBE RENISHAW RMP-60; EXTERNAL SPINDLE SPRAY MIST LUBRIFICATION; GUARD FOR PENDULUM MACHINING

Condition: used, Year of construction: 2009, machine/vehicle number: FA71, Technical Specifications & Performance DataThe SMI SK450 T is a shrink wrapping machine for PET bottles, designed for secondary packaging applications within a used bottling line. Manufactured in 2009, this second hand unit includes a heating oven for controlled shrink-film processing and bundle formation. It is configured for industrial packaging operations requiring stable, transport-ready bottle packs.Manufacturer: SMIModel: SK450 TYear of production: 2009Capacity: 45 packs/minuteContainer type: PET bottlesIncluded equipment: Heating ovenPackage configurations: 0.5L in 3x3, 0.75L in 2x3, and 1.5L in 2x3Advanced Automation & Control SystemsThis shrink wrapping machine is intended for coordinated operation in an industrial packaging environment, where bottle infeed, film handling, heat shrinking, and discharge must remain synchronized. Its operating setup supports repeatable bundle production for the stated PET bottle formats. Installation and commissioning should include verification of the existing control interface, electrical connection, conveyor synchronization, and heating-oven operating parameters.Production Line Integration CapabilitiesThe SK450 T can be positioned downstream of filling, capping, labeling, or accumulation equipment to create multipacks for distribution. In a beverage production line, shrink wrapping provides a practical secondary-packaging stage between bottle handling and palletizing. The machine is suited to PET bottle bundles in 3x3 and 2x3 arrangements, allowing the line to handle the documented 0.5L, 0.75L, and 1.5L formats.For integration into a used bottling line, upstream and downstream conveyors should be matched to the machine's infeed and discharge flow. The heating oven forms part of the packaging process and should be assessed together with film transport components, bottle guides, and pack transfer arrangements during installation planning.Machine Condition & Maintenance HistoryThe machine is in production and remains operational until 30 September 2026. It is described as being in very good condition, with regular maintenance and extensive annual overhauls carried out by the manufacturer. This maintenance history is relevant for buyers seeking second hand bottling equipment with documented attention to operational continuity and packaging performance.Operational Performance & VersatilityWith a stated output of 45 packs per minute, the SMI SK450 T supports efficient shrink-film bundling of PET bottles for industrial packaging. The documented pack patterns provide flexibility for common beverage production formats, including compact 0.5L bundles and larger 0.75L and 1.5L bottle configurations. Shrink wrapping helps produce stable multipacks suitable for handling, storage, and onward palletizing.Installation Requirements & Site PreparationSite preparation should provide sufficient space for the shrink wrapper, heating oven, safe material flow, and access for operation and maintenance. The installation layout should account for bottle conveyors, film supply, bundle discharge, and connection to downstream packaging machinery. Electrical services and any required line utilities should be checked... Bjdpfxjztwl Ie Abtedg

Year of construction: 2020, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 12000 mm TRANSVERSAL TRAVEL: 1600 mm VERTICAL TRAVEL: 3600 mm RAPID FEEDS L-T-V: 30 m/min TABLE SIZE: 13000 x 2500 x 300 mm SPINDLE: 450 - 5000 rpm; 34 kW; 830 Nm; ISO 50 HEAD: UNIVERSAL AUTOMATIC A/B AXIS ; MILLESIMAL POSITIONING TOOL MAGAZINE: CHAIN-TYPE ; 100 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 40 Bar WEIGHT: 87480 Kg ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; Bdjdpfx Abszbnr Aotog LASER TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL NOTE: ROTARY TABLE 1500X1500, 1,5 rpm, MAX ADMITTED LOAD 15.000 Kg; HEAD LOADING/UNLOADING DOUBLE CRADLE; MOBILE WORKING PLATFORM; PERIMETER FENCES; STATIC RTCP OF ROTATING TABLES; STATIC RTCP IN THE SPACE ; AUTOCAL; VIBRATION DETECTION PROBE; COOLING TANK 1500L; GREEN MODE FUNCTION

Condition: good (used), functionality: fully functional, machine/vehicle number: WMAL20ZZZYG147601, mileage: 49,076 km, first registration: 03/2000, axle configuration: 2 axles, gearing type: mechanical, fuel: diesel, fuel type: diesel, Year of construction: 2026, operating hours: 7,649 h, New master cylinder New radio system Bodpezwmkusfx Abtsdg Well-maintained in the workshop Work platform/basket