Used Automatic Defect Cross-Cut System for sale (59,492)

Condition: excellent (used), Year of construction: 1994, Automatic defect cross-cut system Wood width max. 260 mm Wood height max. 100 mm Saw 7.5 kW Feed 6,9 kW Lsdpfx Aokv Untokmjru worked 1995 - 2012 approx. 4 hours/day

Condition: used, Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the process is extremely gentle on the tooling. The pipes remain almost completely dry and free from major contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Ledpfszw Ukcjx Akmjru Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging are directly integrated). Thanks to two separate box output stations (rear-side airlocks with sliding doors), the system automatically switches to the second station when the first box is full. The removal of the finished KLT boxes takes place in parallel with the main processing time without stopping the machine. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest setup times in non-cutting separation Material-saving and free from contamination Chip-free Easy to maintain No coolant or lubricant required Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs possible Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimps) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feeding system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths by means of a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup operation: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panes Logistics / Output Integrated box unloading station 2 separate box output stations for rear-side removal via protected airlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of construction: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in good optical and mechanical condition.

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Lsdpfx Aozzrutokmjru Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: excellent (used), IM Very good condition. Lrodpfx Aksxclluomou

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 700 mm, table width: 6,000 mm, OPTIMIZING AND DEFECTING CROSS-CUTTING LINE CURSAL MOD. TRV 2000E 700 SX Line configuration: - Motorized roller conveyor 6000 x 760 mm - Chain feeder with singulator (buffer magazine) for boards from 4500 mm up to 6000 mm, capacity 6 boards - Optimizing and defecting cross-cutting saw Cursal mod. TRV 2000 E 700 SX - Roller feed system Ljdjywdx Sjpfx Akmeru - Blade diameter 700 mm - Max feed speed 150 m/min - Cutting section 480 x 65 mm - Cutting section 530 x 30 mm - With chalk defect marking system - Year 2015 - Outfeed conveyor belt 5000 x 600 mm - Bilateral overhead ejector - N. 2 transfer conveyors for semi-finished parts (1 right + 1 left) - N. 2 accumulation roller conveyors (1 right + 1 left)

Condition: used, Year of construction: 2004, functionality: fully functional, AUTOMATIC CROSS CUTTING MACHINE STROMAB MOD. TR 600 - 2 meters infeed rollers - 2 meters outfeed rollers - N. 3 stops Lodpfox Rrp Ssx Akmsru - CE rules - Year 2004

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 6 V, NEW AUTOMATIC SACKING MACHINE (P SYSTEM Automation) FOR PELLETS – COMPLETE WITH FEEDING SCREW AND CONTROL PANEL For sale is a new automatic sacking machine (exhibition model), designed for packaging pellets and other granular materials into bags formed directly from plastic film on a roll. This solution is suitable for both integration into existing pellet production plants and for new packaging lines. Composition of the supply: • New automatic sacking machine with product weighing and dosing system. • Inclined feeding screw. • Screw designed for connection to a suction and dust extraction system. • Control unit. • Conveyor belt for discharging packaged bags. Operation: The packaging cycle is fully automatic and includes: • Bag formation from plastic film on a roll. • Weight-based dosing of the pellets. • Bag filling. Lsdpfx Asz Sc Acjkmjru • Vertical and horizontal heat sealing. • Automatic cutting. • Discharge of the finished bag onto the discharge conveyor. The machine is designed to be operated by a single operator. Main technical features: • Indicative productivity: up to 200 bags/hour. • Maximum bag weight: 25 kg. • Bag width: 350–500 mm. • Bag length: 500–700 mm. • Packaging material: plastic film on a roll. • Film thickness: 60–120 microns. • Electrical supply: 400 V – 50 Hz. • Installed power of the sacking machine: 6 kW. • Control system: touch screen panel. Integration options: Upon request, the supply can be completed with: • KIT FOR CREATING FOLDED CORNERS ON THE BAGS • Pellet storage hopper of various capacities. • Suction and dust extraction system. • Automatic palletizer. • Pallet wrapper. Supply conditions: New machine, not used or reconditioned. Under manufacturer's warranty. Supply terms: Ex Works – Cremona, Italy.

Condition: good (used), Year of construction: 1992, fully automatic programmable capping with additional line detection for defect capping via LUT system infeed belt 6 m 6 ejection stations total length 12 m The infeed belt is not running at the moment, probably because of the frequency converter. Lodpfx Aol H E Taokmeru

Year of construction: 1982, condition: good (used), Travelling crosscut saw, Esterer KSG-F, manufactured in 1982 including saw blades including control system including length measurement including frame including hydraulics available immediately Location: Austria, near Vienna Lodpfx Akeip T Dlomsru

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, cutting width (max.): 610 mm, power: 0.01 kW (0.01 HP), Extreme robustness and maximum power! Ljdpfx Akofcdnlsmeru The Legend_600 has a completely painted, thick and reinforced steel structure. The blade with a diameter of 600 mm, the power of 9.2 kW and the rotation speed of 2750 rpm make it the ideal machine for those who work with wood up to a maximum of 150 mm thick and 610 mm wide.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: SK-K-24001, Optimizing cross-cut saw line with scanner Manufacturer: Dimter Ledpfowya Syex Akmsru Type: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cut saw line with 1 x OptiCut 450 and F 100 feeding system with LuxScan CombiScan+ C 200 and curvature measurement The line was in operation until 2024, has been professionally dismantled and can be viewed.

Condition: used, Year of construction: 1992, saw blade diameter: 550 mm, overall weight: 1,500 kg, power: 13 kW (17.68 HP), No. 3260 CNC cross-cut system Paul 14KE Used, year of construction 1992 (overhauled by the manufacturer in 2012) According to our customer / the previous owner, the machine is fully functional and can be viewed and tested on site Saw blade diameter 550 mm Speed 3500 rpm Bore 120 mm Connected load 13 kW Workpiece length 600 - 7000 mm Workpiece width maximum 380 mm Workpiece thickness maximum 100 mm Wood cross-section minimum 12 x 40 mm Wood cross-section maximum 45 x 380 / 100 x 200 mm 6 driven bottom rollers 6 non-driven top rollers CNC control MAXI x.3 Complete with infeed, outfeed conveyor, switch cabinet and control Technical documentation available Weight approx. 1500 kg Sale on behalf of customer, ex location near 99091 Erfurt, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Lrsdpsyl R Uuefx Akmju Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: new, Year of construction: 2026, warranty duration: 11 months, TVM Ø 400 - The Versatile and Customizable Saw for Your Carpentry Workshop The TVM 400 is the all-purpose saw that is essential for your workshop. With a solid and high-performance structure, it is designed to provide an excellent solution for cutting small-section woods, quickly eliminating knots and imperfections. Thanks to the option of customizing it with accessories such as roller conveyors and stops, the TVM 400 ensures maximum versatility and productivity (discover more details in the ACCESSORIES section). Key Features: Lrodev Iqaxopfx Akmsu Efficient and Cost-Effective: Ideal for small and medium-sized carpentry workshops, offering excellent value for money. Ease of Use: Perfect for use without the need for highly skilled personnel, saving time and resources. Reliability: Always ready for use, supporting all operational needs and reducing machine downtime. Cost Optimization: With the TVM 400, you get a durable machine that doesn’t require frequent maintenance interventions. Advantages: Operator safety ensured by a design aimed at reducing risks. Optimized ergonomics to improve productivity during processing stages. Wear compensation of materials without the need for frequent replacements. Simplified maintenance to reduce costs and increase efficiency. Ready for CURSAL accessories, offering full customization according to production needs. Rationalized cost/quality ratio, making the machine a smart investment. Applications: Production of semi-finished wooden furniture components. Manufacturing of window frames and similar applications. Small-batch production of various types, for specific needs. TVM Ø 500 - The Advanced Solution for High-Volume Production The TVM 500 is one of the most in-demand saws on the market for its ability to handle high-volume production with quality and precision. The optimal cutting section allows for the processing of 90% of squared boards and is perfect for industries that require high performance, such as packaging, construction, and the production of sofa frames and laminated panels. This machine offers maximum flexibility and precision in operations, thanks to advanced features such as: Electropneumatic stops, ideal for cutting stacked boards with repetitive measurements. Numerically controlled stops, for precise measurement management, even in complex processes. Discharge of semi-finished products via transfer systems, discharge tables, or roller conveyors, ensuring smooth and fast material handling. Main Advantages: High productivity for large-volume applications. Versatility in sizes and configurations, adaptable to multiple industries. Operational flexibility supported by advanced accessories. The TVM Ø 500 represents a strategic choice for those seeking a saw capable of meeting the most demanding challenges in the industry, while maintaining high standards of quality and efficiency.

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Ljdpfxjdy Hrds Akmjru Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts Lsdpfx Aewb Hxvskmjru - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Dimter / Weinig OptiCut 450 Quantum Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Model: OptiCut 450 Quantum Year of manufacture: 2006 Machine description: For sale: Dimter / Weinig OptiCut 450 Quantum optimizing cross-cut saw, year 2006, designed for high-speed and precise cross-cutting of timber with yield optimization. The Quantum version is one of the top models in the OptiCut 450 series and was developed for industrial use with extremely high output, precise positioning and reliable material transport. Lsdpfx Asyu Urijkmoru The machine is suitable for fixed-length cutting, defect cutting and production optimization. The OptiCut 450 series was designed for integration with scanners, sorting systems and automatic handling equipment. Typical Quantum features include VarioSpeed infeed, HighGrip feed rollers, an independent length measuring system and a servo-controlled intelligent waste gate. Technical data: - capacity: up to approx. 540 cuts/min - feed speed: approx. 300 – 415 m/min - maximum workpiece length: approx. 6.3 m - saw blade diameter: 450 mm - maximum cutting width: 235 mm - maximum cutting height: 100 mm - working height: 900 mm - motor: 7.5 kW - air consumption: approx. 1200 NL/min - cutting accuracy in the OptiCut 450 series: approx.± 0.8 mm Features / advantages: - extremely high cutting performance - high positioning accuracy - VarioSpeed system reducing gaps between boards - HighGrip rollers for secure material transport - servo-controlled waste gate - suitable for integration with scanners and sorting lines - proven Weinig / Dimter technology for continuous industrial production Condition: very good Note: Technical details may vary depending on the exact machine configuration, control version, handling equipment and installed options.

Condition: used, Year of construction: 2007, No. 3177 Automatic optimizing cross-cut saw WEINIG Dimter OptiCut 200 - 1 Used, year of construction 2007, machine already dismantled For cutting timber to fixed lengths Timber dimensions to be processed: Minimum / maximum input length: 3000 - 5000 mm Minimum / maximum input width: 80 - 200 mm Minimum / maximum input thickness: 38 - 80 mm Maximum timber cross-section: 200 x 50 mm Minimum / maximum finished timber length: 700 - 1000 mm Average number of cuts per board: 5 Types of wood: softwood or hardwood System performance: Maximum feed speed: 180 m/min, continuously adjustable Time per cutting cycle, including braking: 0.7 - 1.2 seconds Overview of components: Item 1: Infeed conveyor belt upstream of the saw Lsdpfx Akou Atmuemsru Length: 1.5 m, coupled to the saw’s feed motor Item 2: Automatic cross-cut saw OptiCut 200 - 1, left-hand version With integrated length-measuring wheel and integrated blow-out device for waste pieces Graphics-capable operator terminal with 1/4 VGA display, numerical keypad and function keys, including the OptiCom software package for system control The machine is fed from the left-hand side Item 3: Outfeed conveyor belt / sorting station With drive unit, without ejectors Conveyor length: approx. 1.5 m The infeed table was not used by the previous owner. Two feed rollers were installed for feeding the material. The conveyor table is included, only the rubber conveyor belt is missing. Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, OptiCut S 50+ optimizing saw - Feeding system with transverse conveyors and automatic pusher - Outfeed conveyor belt with 2 zones, including ejectors and tables, one of which is foldable - Saw motor: 7.5 kW Ledpfezkbmdsx Akmsru - Boards/planks up to 5 meters long can be fed into the machine. - Maximum cutting cross-section: 270 x 100 mm Additional technical information and a video are available upon request.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Dimter / Weinig OptiCut 350 Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Model: OptiCut 350 Year of manufacture: 2004 Machine description: For sale: Dimter / Weinig OptiCut 350 optimizing cross-cut saw, year 2004, designed for fast and precise cross-cutting of timber with optimization function. The OptiCut 350 belonged to Dimter’s high-performance series and was used for fixed length cutting, defect cutting and timber yield optimization. The machine is suitable for joinery shops, sawmills, pallet production, furniture components and general industrial timber processing. Depending on configuration, the machine may include optimization software, automatic infeed, loading stations and barcode optimization. Technical data: - Machine type: optimizing cross-cut saw - Maximum cutting height: approx. 120 mm - Maximum working cross section: approx. 235 x 12 mm or 120 x 100 mm - Minimum timber width: approx. 30 mm - Maximum feed speed: up to approx. 350 m/min - Infinitely variable feed: yes - Frequency-controlled cutting speed: yes - Saw motor power: 7.5 kW - Positioning accuracy: approx. 2 mm - Optimization program: yes Features and advantages: - High cutting performance - Automatic material positioning - Possibility of yield optimization - Proven Dimter / Weinig technology - Suitable for continuous production Lrsdpfx Akeyu Uq Eomou - Good solution for industrial timber processing Condition: good Note: Technical details may vary depending on the exact machine configuration, optional equipment, table length and control version.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Machine specifications: - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW Lodpfx Aoypvdijkmoru - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL With side pusher and waste gate 5. Outfeed transport belt

Condition: good (used), Year of construction: 2018, functionality: fully functional, total width: 3,642 mm, total length: 3,334 mm, input voltage: 400 V, feed length X-axis: 2,900 mm, feed length Y-axis: 2,600 mm, working width: 2,600 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, cutting width (max.): 2,540 mm, cutting height (max.): 20 mm, compressed air connection: 9 bar, We are selling our Atom FlashCut Fashion 26B All-in-One fully automatic cutting table system. With a usable working area of 2,900 x 2,600 mm, a cutting window of 2,540 x 850 mm, and a separate unloading area of 1,200 x 2,600 mm, the FlashCut 26B offers ideal conditions for efficient workflows. The maximum cutting height of 20 mm allows for processing a wide range of materials – including multilayer applications. Two independently operating tool heads ensure high speed and maximum productivity. Servo drives on the X, Y, and Z axes guarantee precise movements with a travel speed of up to 80 m/min and an acceleration of 1G. Intelligent Material Handling & Vacuum Technology A continuous conveyor belt feeds the material into the processing zone. The vacuum table is divided into 300 x 300 mm segments, allowing targeted activation of individual areas. This ensures precise material fixing while minimizing energy consumption. Two high-performance vacuum pumps with frequency control (3–15 kW) automatically adjust their output to actual requirements. The result: secure material fixing with energy-efficient operation. Precision through Camera and Projection Technology For maximum material utilization, the system is equipped with two cameras with integrated light sources and dimmers for detecting irregular material contours – for example, when processing leather hides. Flaws can be digitally marked and taken into account during further processing. Two high-performance projectors support automatic nesting by projecting cutting contours directly onto the material. In addition, item numbers, sizes, or other markings can be projected onto the cut parts – ideal for process reliability and traceability. Powerful CNC Control & Software The system features a modern CNC control unit, including TFT color display, keyboard, and USB interface. An integrated computer with Windows Embedded, Ethernet connectivity, and TeamViewer support enables easy operation and remote maintenance. The software package includes: - DXF converter for reading and converting CAD files - Interactive layout software - Automatic nesting software - CAD module for creating simple geometries Optionally, the Luxury Nest Strategy adds a specially developed nesting logic for optimizing leather cutting. It takes into account quality zones, defect areas, and defined rotation and grouping rules to ensure maximum material yield. Versatile Tool Equipment Lrodpfxjymn R Ns Akmsu The FlashCut 26B comes with a multi-tool head. Standard tools include: - Drag knife - Punch tools (various diameters) - Marking tool - Tracing needle - Laser pointer - Knife holder and ejector This makes the system flexible for cutting, marking, and perforating tasks. Safety & Reliability A safety system with light barriers and emergency stop button ensures maximum operational safety. The machine is CE-compliant and designed for continuous industrial operation.

Condition: ready for operation (used), Year of construction: 2024, We offer for sale a modern PAOLETTI Salvacut 3000 automatic cross-cut saw, designed for high-performance and precise cutting of wood materials. This machine represents a powerful and efficient solution for automated cutting operations with high speed, accuracy, and reliability. Key Features & Benefits Manufacturer: Paoletti Energy S.r.l. Model: Salvacut 3000 Year of manufacture: 2024 Automatic cutting system for high productivity Suitable for industrial wood processing and production lines Robust and modern construction Technical Specifications General Voltage: 400 V Frequency: 50 Hz Installed power: 12 kW Saw motor power: 5.5 kW Cutting System Saw blade diameter: 500 mm Bore / thickness: 35 / 4.2 mm Cutting speed: 2880 rpm Minimum cutting time: approx. 0.3 s Material Capacity Max. cutting section: approx. 70 × 300 mm Max. workpiece length: approx. 5,100 mm Min. workpiece length: approx. 500 mm Min. cross-section: approx. 30 × 15 mm Performance & Feeding Maximum feed speed: up to 200 m/min Material feed direction: right to left (left to right on request) High-speed automatic processing Compressed Air & Extraction Air pressure: approx. 6–8 bar Air consumption: approx. 500 Nl/min Extraction capacity: approx. 5,000 m³/h Extraction speed: approx. 28–30 m/s Extraction connections: Ø120 mm and Ø100 mm Dimensions & Weight Main unit weight: approx. 2,000 kg Max. output sorting unit load: approx. 500 kg Working height: approx. 1,000 mm Operating Conditions Operating temperature: +5 °C to +40 °C Storage temperature: +5 °C to +40 °C Advantages High cutting speed and precision Reliable industrial design Suitable for continuous operation Efficient material processing with stable output quality Ljdpfjzgr Scex Akmeru Additional Information CE certified Modern machine (2024) – very good condition

Condition: good (used), Year of construction: 2004, I sell the automatic pneumatic end cutting saw OMGA T521 OPT 6600, year 2004. Input table automatic feeding 6,60m (pusher system) Lrjdpfoz Suzpsx Akmsu Outut table 3,00m Total length: 10,50m Optimising with automatic cutting sequence modes. Fluorescent chalk sensor reader. Available immediately. CE version. Documentation included.

Condition: used, Year of construction: 1997, machine/vehicle number: 972842, SECOND-HAND SEMIAUTOMATIC CROSS CUTTING SAW TRV 500 - CE RULES - Mobile pressure system - Right/left feeding - Conveyor belt TSLR 6000X400 - N. 3 unloading tables mm. 1000x1200 Lsdpfx Aswr T Rmskmeru - Waste belt conveyor TSS 45° mm. 2500 - Strapping machine SIVARON SS-80 - Year 1997

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm Ledpfxozuygqs Akmeru • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell