Used Automatica S.r.o. Secondary Shredder for sale (2,472)

Condition: repair required (used), Year of construction: 2014, functionality: not functional, machine/vehicle number: OP-2013-019*002, total length: 2,730 mm, total height: 3,192 mm, overall weight: 3,100 kg, total width: 1,752 mm, This is a two-rotor, slow-speed shredder from the manufacturer Automatica s.r.o., equipped with a new electric motor and a Nord gearbox. Unfortunately, the machine has a rotor shaft defect, but it is repairable. It includes new stator and rotor blades. New electrical wiring, including a switchboard. Control via PLC, see photo. Dsdpfx Apozgf R Setocl The shredder is designed for shredding wood, plastic, cardboard, etc.

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Dodswxmb Ejpfx Aptjcl Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Delivery time: immediate Dcodpsyu Undofx Aptjl

Condition: good (used), Year of construction: 1998, Motor power [kW]: 150 (2x75) Number of blades on the shaft: 48 (2x24) Blades [mm]: 80x80x45 mm (reinforced/extended mounting threads). New, square. 4 blades, of which 3 blades are 100% and 1 blade is approximately 70% new Rotor: Shaft width [mm]: 2,100 Number of shafts: 2 Shaft diameter: 500 mm Shaft speed [rpm]: 75-165 Screen diameter [mm]: 30 mm Chamber dimensions [mm]: 2,100 x 1,250 Automatic start: Soft start Rated voltage: 3 x 400 V/50 Hz Rated current: 160 A-200 A Automation: Siemens Simatic Weight [kg]: approx. 14,500 Dimensions: Length [mm]: 3,850 Width [mm]: 2,720 Height [mm]: 2,700 Documentation: German 2014 A complete overhaul was carried out. A list of these parts and pictures are available upon request. This machine has not been used for several years (since then - one owner). Previously, it processed plastic, film, and cardboard - RDF after selective recycling. The approximate throughput for materials like the above (lightweight) is about 1-1.5 tons/hour. Other materials - to be checked/discussed. The machine was fully functional and is currently stored on site. Dcedpfx Apeibzbhstel Additional photos and video available upon request.

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, power: 367.75 kW (500.00 HP), filling opening width: 700 mm, filling opening length: 1,200 mm, rotational speed (max.): 1,050 rpm, rotational speed (min.): 950 rpm, - Engine: Deutz 500 HP - Fill opening dimensions: 1200x700 mm - Rotor: 4 shafts and 40 stars - 950-1050 rpm - Throughput: 4-6 t/h Dsdpfx Apsy I Uwajtecl - incl. new spare rotor & stars - completely overhauled & modernised

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: UNTHA 1, power: 22 kW (29.91 HP), Untha RS 30 4S – Year of manufacture 1992 Cable shredder, pre-shredder, chip shredder, two-shaft shredder, rotary shear, rotary knives, chip shredder Power: 400V, 22kW with pump station, with control system Includes 5m long screw conveyor and inclined belt conveyor Ideal for pre-shredding cables (including plug ends), plastics, metals, wood, etc. Very robust motor and gearbox Very good condition Collection by appointment only in 75053 Gondelsheim Dsdoyhzwcspfx Aptjcl Shipping via freight company possible, please provide postal code for inquiry

Year of construction: 2014, condition: excellent (used), functionality: fully functional, We offer this pellet production line from STOZA s.r.o., in very good condition, year of manufacture 2014. Manufacturer: STOZA s.r.o. Year of manufacture: 2014 Condition: very good Category ID: 659 Type: Pellet production line If you have any questions or need further information, please feel free to send us a message or call us. Dedpfx Apsy Ah Nfotscl

Condition: used, functionality: fully functional, power: 400 kW (543.85 HP), Becker Type 48/50 Shredder – 400 kW incl. Drive and Voith Turbo Coupling For sale is a Becker Type 48/50 shredder with a 400 kW drive. The machine was used for the processing and shredding of electric motors, electronic waste and cables and is particularly suitable for electrical and metal-containing materials. Extensively refurbished: * All plates and wear plates replaced * Rotor completely renewed * Rotor cutters replaced * Apron conveyor completely overhauled * Wear parts on the apron conveyor replaced Djdpfozygghjx Aptscl * Voith turbo coupling overhauled * Drive completely overhauled * New motor mounting plate * New discharge chute made of stainless steel * New discharge hopper * New cast grates Scope of delivery: Becker Type 48/50 shredder, 400 kW drive, overhauled Voith turbo coupling with overload protection, new motor mounting plate, new stainless steel discharge chute, new discharge hopper, new cast grates, and a spare parts package including a used spare rotor. Following the extensive refurbishment, the machine is in very good and operational condition. An on-site inspection is recommended. Further technical data and documentation are available upon request. Price: upon request

Condition: ready for operation (used), Year of construction: 2007, The Vecoplan VAZ 2000 M F-T is a robust heavy-duty single-shaft shredder manufactured in 2007 for industrial recycling applications. Suitable for plastics, films, wood, paper, cardboard, EBS/RDF, and commercial waste. Formerly part of a production line for LDPE PCR film bales; the production line was modernized and rebuilt in 2024. Successful tests for processing used pallets and cardboard cores have been carried out. The processing of wood and cardboard cores is technically unproblematic. The machine condition has been documented by Vecoplan, and the required spare parts for recommissioning have already been ordered. The sale is due to an internal department closure and the associated restructuring of operational processes. Rotor length approx. 2,000 mm, hydraulic ram for uniform material feeding, flipper/airspring counter-knife system for high operational reliability, Torque/HiTorc drive for high torque and energy-efficient operation, replaceable reversible cutting inserts, suitable for both pre-shredding and secondary shredding, final particle sizes depending on screen and material approx. 10–250 mm, high throughput capacity, and robust, maintenance-friendly design. Inspection possible by appointment. Dodpfey T Hbbsx Aptscl

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Continuous Wire Mesh Belt Dephosphating & Washing Machine Manufacturer: Aquaflot s.r.o. Year of Manufacture: 2002 Condition: Available for inspection We are offering a well-maintained continuous wire mesh belt dephosphating and washing machine, suitable for cleaning and surface treatment of steel components prior to heat treatment, coating, painting, or assembly operations. Key Features Dodozf Hmrepfx Aptjcl - Continuous operation with wire mesh belt conveyor - Designed for dephosphating and washing processes - Suitable for medium to high production volumes - Robust industrial construction - Easy integration into existing production lines - Reliable and proven technology Applications - Automotive components - Fasteners and fixing elements - Forged and machined parts - Heat treatment preparation - General metal finishing operations The machine is currently available and can be inspected by appointment. Additional technical information, dimensions, photographs, and videos can be provided upon request. Location: Germany Delivery Condition: Ex Works (EXW) Contact: Fornax Machinery GmbH Please contact us for further details and pricing.

Condition: excellent (used), Year of construction: 2012, operating hours: 8,200 h, functionality: fully functional, repeat accuracy: 0.3 mm, table width: 2,200 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, table length: 3,200 mm, milling spindle speed (max.): 12,000 rpm, ____RoboMill 2KR240 S20BT40 TT6t TB16 WM1 Collected Next Generation Robotic Stone Processing Complex “NO CONCRETE FOUNDATION REQUIRED” The robotic complex presented here is based on a KUKA KRC2 robot from 2012. The system can also be supplied with: - used KUKA KRC4 robots, - brand-new KUKA KRC4 robots, - next-generation KUKA KRC5 robots. Our company also offers larger robotic configurations based on the KUKA KR360 / KR500 platform, available in both used and new versions. Additional configurations are available with: - fully automatic spindle and wire-frame exchange systems, - additional milling spindles, - wire-saw frames of various widths, - additional technological heads, Dcodozawm Hspfx Aptol - rotary tables with payload capacities of: - 10 tons, - 20 tons, - 30 tons, - additional protective safety fencing systems. Introducing RoboMill — an adaptive multifunctional robotic system designed for: - milling, - contour cutting, - wire-saw processing, - stone slab machining. The key feature of the complex is its monobase construction, where all major system components are integrated into a single steel platform. The robot, rotary table, electrical communication, air and water lines, spindle cooling system, positioning systems, tool banks, and auxiliary mechanisms are all mounted on one rigid structure. This engineering approach provides several major advantages: - preservation of system geometry even after transportation - elimination of concrete foundations - rapid deployment at a new location - preservation of CAM-system mathematical accuracy without recalibration Installation requires only: - positioning the platform on the surface - drilling six anchor holes - fixing the structure using chemical anchors - connecting electrical power, compressed air, and water supply After that, the system is ready for operation. - Standard Configuration The complex is equipped with: - industrial KUKA robot - automatic 16-position BT40 tool bank - semi-automatic spindle and wire-frame exchange system - rotary table with payload capacity up to 6 tons - 3200 × 2200 mm slab-cutting platform for disk machining - integrated spindle cooling system - internal routing of electrical, pneumatic, and water communication ____Robot System Functions The robot memory contains: - semi-automatic spindle and wire-frame exchange programs - all 16 spatial tool pickup and return programs - external kinematic models of the rotary table - auxiliary positioning and safe-transition programs Because all components are rigidly fixed to a single monobase structure, the center distances between the robot, table, and technological modules remain unchanged even after transportation. This allows the CAM mathematical model to remain fully valid while minimizing setup and recalibration time after installation. ___RoboMill is not just a robot. It is a mobile industrial platform for modern automated stone processing.

Year of construction: 2017, condition: excellent (used), I sell the turning device AUTOMATICA DVPGP. Year 2017. One side feeding suitable for line. Dsdjw Am Ndjpfx Aptocl Element width up to 1400mm Total length 4500mm Available immediately. Ready for work, possible to test.

Year of construction: 2018, condition: ready for operation (used), I sell the 4-side spraying automat Automatica 90° feeding system 4 x 2 spraying guns from each side Feeding system with motors. Dcsdpfew Ancfjx Aptjl Good condition. Available immediately.

Condition: used, Year of construction: 2012, functionality: fully functional, Typical Applications: - Pulled meat and poultry production - Ready meal and prepared food lines Features: - Continuous flow design for consistent output - Fiber pulling action (not cutting or tearing) for natural texture - Stainless steel construction with easy-to-clean access - Safety interlocks and easy washdown design - Compact footprint for seamless integration Make: Cove Model: SH-5 Made in USA Capacity: 794 kg/hr Hopper Feeder Height (mm): 1900 Dcsdpfxox Akcre Aptjl Hopper Opening (mm): 450 x 380 Throat Opening (mm): 270 x 220 Throat/Chute (mm): 970 Discharge Height (mm): 700 Overall Dimensions: 1000 L x 630 W x 1900 H Weight: approx. 113 kg YouTube video: factory video, similar machine, not this exact unit!

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 20 h, Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm Dedpfxjf N Nk Hj Aptocl • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Inlet width: 540 mm Dcsdpfx Aszx Rngoptsl - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft - Lower shaft motor: 4 kW - Top driven serrated shaft - Upper shaft motor: 4 kW - Belt feeder - Feeder belt length: 4720 mm - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR (Prices may vary in case of significant fluctuations)

Condition: like new (used), functionality: fully functional, type of input current: DC, input voltage: 230 V, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, Industrial Gas Infrared Heaters Lersen COMPACT TOP COUT08 – 2 Units For sale: 2 industrial gas-fired infrared radiant heaters, Lersen CZ COMPACT TOP, model COUT08. Suitable for heating production halls, warehouses, workshops, and other large industrial spaces. Technical specifications: Manufacturer: Lersen CZ s.r.o. Type: COMPACT TOP Model: COUT08 Quantity: 2 units Fuel: G20 natural gas Dedpfxszvaino Aptocl Rated input: 37–48 kW Rated heating output: 33–43 kW Gas consumption: 3.5–4.6 m³/h Electrical connection: 230 V / 50 Hz Electrical consumption: 70 W CE marked Made in the Czech Republic Both units are being sold together. The condition can be seen in the photos. Price for both units: €1,250 Location: Ivanka pri Nitre, Slovakia For further information or additional photos, please contact me via message.

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 3101, power: 22 kW (29.91 HP), filling opening width: 500 mm, filling opening length: 800 mm, Shredder for wood waste / plastics / paper / cardboard / ... Nails in the wood are no problem either... Dcedpfx Apszvmphjtsl READY FOR USE

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SWM001, type of input current: DC, nominal power at 50% duty cycle: 37 kVA, input voltage: 380 V, type of cooling: water, overall weight: 230 kg, warranty duration: 24 months, welding power (max.): 75 kVA, total width: 500 mm, total height: 1,620 mm, total length: 950 mm, Spot welder / welding machine with water cooling – 75KVA – adjustable power, resistance, etc., + spare tips Dcjdpfx Apoyl Sy Eetjl

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW Dsdpfx Apsyzzh Eotocl machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Condition: excellent (used), Year of construction: 1974, Catalogue number 7685 TECHNICAL DATA Dcjdpfxszruc Uj Aptel - feed opening width: 440mm - feed opening height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen size: 50x50mm - toothed feed roller from top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (adjustable) - with conveyor belt - feed belt length: 4006mm - feed belt width: 380mm - belt feed forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight approx. 2000kg ADVANTAGES – German-made – with conveyor feeder – auto-reverse – used chipper, in very good condition Net price: 76,900 PLN Net price: 18,300 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2001, CATALOGUE NO. 7089 TECHNICAL DATA - Loading hopper inlet 1020x1230mm - Rotor working width 1020mm - Rotor diameter 348mm - Main motor 22kW, 400V, 50Hz - Pump motor 0.75kW - Number of knives: 50 pcs - Knife size: 35x35x20mm - Sieve: 12mm - Hydraulic pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg Dcodpfx Apsztau Sstel ADVANTAGES – Auto-reverse – Similar to WEIMA WL 10 – German made – Pusher drawer – Very good condition – Used shredder, DTR+CE documentation Net price: PLN 99,900 Net price: EUR 23,790 based on exchange rate 4.2 EUR (Prices are subject to change with major fluctuations)

Condition: used, Technical specifications: For shredding wooden waste Shaft width: 500 mm Shaft diameter: 2x250 mm Screen diameter: 20 Safety switch Power supply: 400 V Motor power: 2x5.5 kW Dcodpfezza Eyex Aptel Overall dimensions: Length: 1500 mm Width: 800 mm Height: 1750 mm

Condition: used, Year of construction: 1991, total length: 6,450 mm, total height: 2,200 mm, total width: 2,200 mm, Komplett mit Förderband und Magnet - Year: 1991 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 45 - Rotation speed [rpm]: 982 - Hydraulic unit power [kW]: 7.5 - Oil tank capacity [L]: 110 - Rotor width [mm]: 1000 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 2300 - Opening width [mm]: 2500 - Opening length [mm]: 3200 - Sieve perforation [mm]: 200 Dodpfx Apjww T U Njtocl - Number of rotating knives [pcs.]: 1 - Transport dimensions: 6450mm x 2200mm x 2200mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2022, operating hours: 800 h, functionality: fully functional, fuel type: electric, gearing type: automatic, Pezzolato electric, 300 KW 22 KW hydraulic Model PTH 1000/1000 E Sales code C6905 Dcjdpfxjzwdrie Aptjl The machine is still connected to the electrical power supply.