Used Autotherm Temperaturregelgerät Awf 130-27/Vk/6K for sale (9,315)

Condition: used, Autotherm Type: Autotherm temperature control unit AWF 130-27/VK/6K Iodpfx Ajzd Rtyogyobc 6-circuit temperature control unit Without active refrigeration unit! According to the enclosed technical brief: Temperature range: -40°C ... +85°C (extended temperature range -40°C…+130°C) Increased heating capacity: 27 kW instead of 18 kW Includes 1x temperature control in the main circuit Includes 6x temperature measurement in each supply line Includes 6x temperature measurement in each return line Includes 6x flow rate and pressure measurement in each supply line Includes 6x flow rate and pressure control 1 l/min .. 12 l/min and 0.1 bar … 3 bar Including changeover control Including frequency inverter-controlled pump in the main circuit Including 6x 3-way valve Includes 6x additional relief valve 2 … 12 bar, adjustable Preset to 2.4 bar Includes filling and draining device For all circuits, jointly/simultaneously Including 50-liter integrated tank Including pneumatic drain function Including S7 control system Energy saving and increased cooling capacity: An additional glycol circuit integrated into the temperature control circuit takes over the cooling of the consumer in a temperature range of +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C chilled water network. The cooling capacity at a supply temperature of +20°C is: 50 kW. This increases the cooling speed in this temperature range and saves energy due to the shorter running time of the refrigerant compressor. (The footprint of the base unit increases by approx. 0.3 m² according to the data sheet). Assembly in Rittal modular enclosure: 2x TS8 800x1000x2000 mm 1x additional, separate enclosure, min. 600x600x2000 mm (for control/electrical components) Supplied via on-site or optional cooling medium supply. Supply temperature, on-site cooling fluid -43°C, cooling fluid requirement 7.5 m³/h, continuously regulated. For cooling capacity, a cooling medium must be connected! Weight approx. 1200 kg Sold ex-works! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Autotherm Type: Autotherm AW 95-12/VK/E temperature control unit Autotherm AW95-12_VK temperature control unit for water/glycol temperature control (fully overhauled) Autotherm AW temperature control unit: For highly precise temperature control of water Autotherm temperature control units are used in various areas of industry, research, and laboratory applications. Ibsdpfx Agezhkb Eeysc Temperature control units, for example, supply tools, open baths, double-walled containers, heat exchangers, and heating chambers with temperature-controlled water to maintain them at the desired temperature with high precision. Application areas: Mechanical engineering, for example, in the solar and wind power industry, textile industry Plastics processing Chemical and pharmaceutical industries Paper manufacturing Medical technology Food industry Research Autotherm AKW AW95-12/VK temperature control unit Temperature range: RT°C / +95°C Heating capacity: 12.0 kW Cooling capacity: 18.0 kW Passive cooling system via heat exchanger / connection to a cooling water network required Rated power: 14.5 kW Dimensions: 600 mm x 840 mm x 910 mm Power consumption: 400 volts / 50 Hz 13400 watts, 19.6 A, 5.1 bar Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), functionality: fully functional, Power output: 6370 watts Iedpfx Agjv R Edwsyobc Maximum operating temperature: 95°C Medium: Water Two units available! Price per unit: 350 EUR - PRICE REDUCTION!

Condition: refurbished (used), functionality: fully functional, Equipment: documentation/manual, Hello, we are offering a Thieme TSC 130 squeegee cutting machine that has been completely overhauled in our workshop. It is suitable for a maximum squeegee length of 1300 mm. Ibjdpfx Agszyc T Royec In this system, the squeegee blade is trimmed thinly using a very fast-rotating special knife under a water/alcohol mixture. This is necessary if the squeegee blade has not been installed perfectly flat or if the edge of the squeegee blade is damaged and no longer prints cleanly. The advantage of cutting compared to squeegee grinding is: the rubber does not get hot and melt. You always get the same, defined edge, and virtually anyone can do it. The system is suitable for classic screen printing squeegee blades. It is not suitable for RKS squeegee blades or carbon squeegees. The system is currently located in our warehouse/workshop in 93476 Blaibach. We would be happy to take care of transport, etc. If you have any questions, please do not hesitate to contact us.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lowered suspension Equipment: - Spare wheel - LED lighting - Approach angle 10° Net: €5,693.28 / Gross: €6,775.00 Article number: A3T227451900.03 Technical data: • Brand: Brian James • Model: A Transporter • Vehicle type: Car transporter • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 450 x 190 x 0 cm • External dimensions (LxWxH): 620 x 229 x 69 cm • Loading height of the floor: 52 cm • Permissible total weight: 2,700 kg • Unladen weight: 755 kg • Payload: 1,954 kg • Chassis: Low loader (wheels next to the body) • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum alloy wheels in anthracite • Low-frame design enables an extra low loading height of 520 mm • Very stable steel frame, welded • Vehicle is also designed for all options after purchase: enormous potential for retrofitting: hydraulic tilting functions, winches, etc. can be retrofitted at any time • Closed loading area made of durable and resilient phenolic resin laminated wood with an anti-slip surface. • Front storage box with a spring-assisted lid • Pattern of holes for securing load made of galvanized steel • Numerous lashing points and a highly load-bearing floor offer flexible securing options and perfect grip. • Side panels color: red • Frame completely hot-dip galvanized • Easily extendable, roller-bearing ramps (2000 mm) ensure an extremely flat approach angle • Fold-out, spring-assisted support feet complement the extendable ramps. Can be folded in and out within seconds with your foot • Rear supports with dual function: When folded out, they support the load, and when folded in, they securely lock the ramps in their position during transport. • Spare wheel mounted • Reverse assist • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security ALKO lock • Very stable V-drawbar, REINFORCED • 13-pin plug • Reversing light • Large-sized LED safety lighting Iedpjzy Auhofx Agyebc • Complete LED lighting: Extremely bright, durable and reliable. • Robust protection of the rear lights • Integrated rear fog light • Support wheel in the center • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about any specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - official dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 1.300.030.578, functionality: fully functional, overall weight: 5,000 kg, number of spindles: 8, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of milling spindles: 8 pcs. MACHINE DETAILS Voltage: 400 V Power consumption: 35 A Fuse rating: 50 A Empty weight: 5,000 kg Number of transport packages: 3 pcs. EQUIPMENT Ibodpfx Agoz Nivvoysc Documentation available Drilling tool available Tools included CE marking Type of milling table: beam table Material clamping system: pneumatic

Condition: new, Isitan Hydraulic 4-Roll Round Bending Machine 4R HMS 1270 x 130 Top and bottom rolls driven Hydraulic side roll adjustment 3 digital displays Hydraulic folding bearing Hardened rolls Taper bending device Separate control panel Usable length: 1270 mm Top roll diameter: 130 mm Side roll diameter: 130 mm Total motor power: 3.3 kW Working speed: 5 m/min Weight: 2150 kg Dimensions (mm): 3200 x 1150 x 1110 (L x W x H) Bending capacity: 5 mm Ibodeiffwqjpfx Agyec Pre-bending capacity: 4 mm All bending capacities are calculated based on a 250 N/mm2 yield strength Material: ST 37 - ST 42 structural steel

Condition: new, number of rollers: 4, number of digital displays: 3, Equipment: cone bending device, hardened rollers, swiveling upper roller, – 4 rolls – Capacity: 1270 x 4/5 mm – Pre-bending capacity: 1270 x 3/4 mm – Hardened rolls – Cone rolling capability – Top roll diameter: 130 mm – Bottom roll diameter: 130 mm – Side roll diameter: 130 mm Ibodpjxytlqofx Agyoc – Digital display for left roll movement – Digital display for central lower roll movement – Digital display for right roll movement – Top roll hydraulically swiveling – Steel construction ST-52 – Overload protection – Documentation – 400 V

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 2,600 kg, type of input current: AC, input voltage: 400 V, 4 x Wagner Permanent Magnet Separators – various models A total of 4 used permanent magnet separators from the manufacturer Wagner Magnete are for sale. The magnetic separators were used in our recycling and processing plant and serve to automatically separate ferromagnetic components from different material flows. Due to the restructuring and upcoming reconstruction of our recycling plant, the four magnetic separators are being offered for sale. Technical data of the 4 magnetic separators: Magnet 1: - Manufacturer: Wagner Magnete - Type: 0452-115/130-250 G2 - Equipment number: 546235 - Weight: approx. 2,600 kg - Motor power: 3 kW Magnet 2: - Manufacturer: Wagner Magnete - Type: 0452-115/170-250 G2 - Equipment number: 546236 - Weight: approx. 3,340 kg - Motor power: 3 kW Magnet 3: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 Isdpfjz R Sw Hsx Agyobc - Equipment number: 546237 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Magnet 4: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 - Equipment number: 546986 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Further technical specifications (all 4 magnetic separators): - Belt speed: 1.5 m/s - Motor manufacturer: SEW - Operating voltage: 400 V - Current type: Three-phase (AC) - Frequency: 50 Hz - Protection class: IP55 Condition and sale: All four magnetic separators are in used condition and show corresponding signs of wear and tear due to operation. The magnetic separators can be purchased individually or as a complete package. An on-site inspection is possible after prior appointment. Technical documentation is available. Price upon request. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2008, operating hours: 3,000 h, functionality: fully functional, compressed air connection: 8 bar, overall weight: 130 kg, air demand: 3 m³/h, We offer this used TAMPOPRINT SIC 130 pad printing machine, year 2008. Type: SIC 130 Serial number: SI.06.08.4157 Weight: 130 kg Machine number: 565 Year of manufacture: 2008 Inventory number: VAM003548 Number of prints less than 200.000 SIC - sealed ink cup - paint is not drying, so long pauses between prints do not need cleaning Diameter of cup 130 mm Template size 300 x 150 mm Max prints per hour 1250 Max tampon pressure: 1800N Iodpsz S Amtsfx Agyebc All mechanical adjustments via setting screws Base with a lifting table (approx. 400 mm) and x-y adjustments of the work piece The offer also includes several well-preserved printing pads. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, overall weight: 9,500 kg, rotor diameter: 446 mm, number of blades: 36, total length: 2,990 mm, total height: 2,100 mm, total width: 2,250 mm, rotor length: 1,560 mm, power: 132 kW (179.47 HP), rotational speed (max.): 1,485 rpm, Redoma RC 130 – Single-shaft pre-shredder, rotor 1560mm, used and in working condition For sale is a Redoma RC 130 single-shaft pre-shredder in used, but functional condition. The machine is suitable for pre-shredding various materials in industrial and commercial applications. Scope of delivery: Iedpfxez N Ev Ss Agysbc Redoma RC 130 single-shaft pre-shredder Associated control cabinet Various spare parts The machine is sold in used, functional condition. Ideal for companies looking for a used pre-shredding system or wishing to expand their existing machinery. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: used, mileage: 2,06,000 km, power: 96 kW (130.52 HP), first registration: 04/2016, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 02/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 9, total length: 4,963 mm, total width: 2,050 mm, total height: 2,254 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, Second-hand since 2018. German-made minibus. Original 206,000 total kilometers. Valid TÜV (technical inspection) until 02/2027. In 2025, 2,000 euros were invested in this Citroen Jumper, including: New rear brakes, parking brake partially new. New rear tires (all-season tires). Front tires in new condition (all-season tires, DOT 17/2024). Last service in November 2024. Auxiliary heater (works well). Air conditioning. 9 seats. Radio system. Central locking with remote key. ABS. ESP. Electric windows and exterior mirrors. Ijdpfx Agov I Idbeysbc Unladen weight "2025-2293 kg" according to the vehicle registration document. Permissible total weight: 3000 kg. Standard registration as a "vehicle for the transport of persons with up to 8 seats / multi-purpose vehicle". Original COC (Certificate of Conformity) available. Euro 6. 6-speed manual transmission. The Citroen runs powerfully and very well. This offer is only valid for commercial enterprises, freelancers, farmers and foresters, authorities / emergency services, and similar legal entities. Direct sale to private individuals is unfortunately generally not possible. Subject to prior sale and errors in information. Net price: 9,800 euros. In the event of export, we reserve the right to initially retain a deposit in the amount of the statutory 19% VAT until receipt of the final export certificate (the export confirmation).

Condition: ready for operation (used), Heidenhain UV 130 inverter ID: 324 998-03 SN: 8275519 – with test report, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as per photos. Ibodjy Nrmhopfx Agyoc

Year of construction: 2025, condition: new, Boiler capacity: 270 l Volume flow rate: 520 l/min Ijdpfx Agohhcxzsyebc Motor power: 4 kW Refrigerant dryer: Yes

Condition: ready for operation (used), Heidenhain UV 130 ID: 324 998-03 SN: 8275519 – with test protocol, expertly fully overhauled and tested, includes 3 months warranty, 100% functional, delivery scope as shown in the photos. Please note: In the exchange procedure, your defective part must not exhibit any mechanical damage such as breakages, as these are no longer repairable. In such cases, an additional invoice of €500 incl. VAT will be issued. Attention: You are bidding on a Heidenhain UV 130 inverter, ID: 324 998-03 SN: 8275519, on an exchange basis (exchange service), professionally overhauled and tested, with a 3-month warranty, 100% functional, and scope of delivery as per photos. In both repair and exchange procedures, your defective exchange component must be free of mechanical damage such as breakages, since these cannot be repaired. Otherwise, a subsequent charge of €500 incl. VAT will apply. Ibsdpfxsy Nrnfe Agyec

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 320 mm, nominal power (apparent): 8 kVA, workpiece length (max.): 8,500 mm, total height: 3,100 mm, total length: 11,500 mm, total width: 3,000 mm, rotational speed (max.): 15,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 15,000 rpm, spindle motor power: 5,500 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Elumatec SBZ 130 CNC 3-axis steel processing center, TOP condition Processes steel, stainless steel, aluminum, PVC, etc. The machine can mill, drill, tap, cut, and notch. All machining operations are performed while the profile is stationary. 8-position tool changer on a turret. Ibjdsziy Idspfx Agysc Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Tools and accessories, including special wrenches, as shown in the picture. Tool holder: BT 30 Max. machining length: 850 cm, with stringer-side machining: 838 cm, y-axis: 48 cm, z-axis: 320 cm Year of manufacture: 2010, spindle speed: 15,000 rpm, spindle power: 5.5 kW Weight: approx. 6 tons. Includes laser and partition, protective mat, machining accuracy: x-axis, y-axis, z-axis +/- 0.1 mm Air consumption: approx. 75 liters, with spray nozzles. Inspection is possible by appointment. The machine is located in 91629 Weihenzell.

Year of construction: 2026, condition: used, New display machine! Stationary piston compressor with refrigerant dryer, condensate drain, oil-water separator and pre-/fine filter. The universal solution with belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to two-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimum cooling via large fan wheel, motor with overload protection, easy condensate drainage using the standard-mounted 1/2" ball valve, standard equipped with Condor pressure switch and manometer, mounted as standard on a safety pallet with anti-vibration mounts. Technical data: Suction capacity 650 l/min, output capacity 520 l/min, max. pressure 10 bar, tank volume 270 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V, weight approx. 197 kg Ibedpfx Asyw Thvjgysc Location: Rieth

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, MACO Circular saw / CNC cutting centre Iedpfsz Sy Iusx Agyjbc Model VK 370 AR P Year : 2008 Circular blade max. : 370 mm. Capacity round : 125 mm. Capacity square : 110 x 110 mm. Capacity rectangular : 100 x 150 mm. Can be seen and inspected under power af previous agreement

Condition: ready for operation (used), Heidenhain UV 130 ID 324 998-01 SN:7840727D – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective exchange part must not have any mechanical damage, such as breakage, as these cannot be repaired. In this case, an additional charge of €400, including VAT, will be applied. Attention: You are bidding on a Heidenhain UV 130 ID 324 998-01 SN:7840727D inverter for exchange (exchange service). It has been professionally completely overhauled and tested and comes with a 3-month warranty. It is 100% functional, and the scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €400, including VAT, will be issued. Isdpfez Hib Sox Agyobc

Condition: ready for operation (used), Heidenhain UV 130 ID 324 998-01, serial number: 7840727D – including test report, used, in good condition, 100% functional, scope of delivery as shown in the photos, professionally and completely refurbished and tested, with a 3-month warranty, 100% functional, scope of delivery as shown in the photos. Isdpfxez Hib Eo Agysbc

Condition: good (used), Autotherm ATK 2000 cooling system, 20.5 kW cooling unit in a 20-foot container. Technical data Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Nominal power: 20.5 (31.5) kW Nominal current: 50 (71) A Supply line fuse: 80 A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Inlet: Flange SDIN2633 DIN100 PN16 Outlet: Flange SDIN2633 DIN100 PN16 Overflow / drain: 2" internal thread Well water inlet: 2" internal thread Well water outlet: 2" internal thread Adiabatic inlet: 3/4" internal thread Filling: manual 3/4" internal thread Water circuit Coolant: Water/glycol (90% / 10%) Flow pressure: max. 10.6 bar Tank volume: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 AFAE-EUUE Delivery pressure: ... 2.15 bar Delivery rate: 58 m³/h Consumer circuit Pump type: (Pressure boosting system) Grundfos Hydro 2000 ME 2 CRE 32-6 AFAE-EUUE Delivery pressure: max. 10.6 bar Delivery rate: max. 40 m³/h 20-foot container AIS-DSC-22-28 External dimensions mm (L x W x H): 6058 x 2438 x 2591 Internal dimensions mm (L x W x H): 5898 x 2352 x 2390 Usable area inside m²: 13.88 Ibedpouzhcuofx Agyec Compact control Compact Control 2000 ME. Compact microprocessor control for stepless and cascade control of pumps with MGE motors and integrated frequency converter for demand-based, energy-optimized operation of multi-pump systems. With automatic switching on and off of the individual speed-controlled pumps via a digital controller specially developed for centrifugal pumps. Grundfos R100 infrared handheld device and diagnostic unit: for commissioning, data monitoring, reading error messages and configuring Grundfos pumps. More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, mileage: 22,767 km, power: 96 kW (130.52 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, wheelbase: 4,332 mm, fuel: diesel, CO₂ emissions: 204 g/km, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, Special features: Passenger-side airbag, Onboard computer, rear wing doors (opening angle 270 degrees), full wheel covers, high wood trim in the cargo/engine compartment Other features: Storage gallery, Driver-side airbag, electric exterior mirrors. adjustable and heated, outside temperature display, side marker lights, brake assist, tachometer, electric brake force distribution, driver assistance system: lane change warning system, 185 A generator, cabin filter: pollen filter, body/structure: high-capacity box, fuel tank: 105 liters, load compartment partition, height-adjustable steering column (steering wheel), model update, engine: 2.3 liters - 96 kW dCi diesel CAT, wheelbase: 4332 mm, smoker's package, low emissions according to Euro 6 emissions standard, gearshift indicator, sliding door loading/passenger compartment on the right, front mud flaps, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: height-adjustable driver's seat, lashing eyes on the load compartment floor, heat-insulating glazing, permissible Gross vehicle weight 3.50 t Iodpfxoy N Enrs Agyjbc Equipment was determined using a VIN check; technical errors may occur here. CoC present. Equipment: - Truck registration - Wooden floor - Partition wall - Workshop equipment Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: used, mileage: 44,158 km, power: 96 kW (130.52 HP), first registration: 10/2017, fuel type: diesel, empty load weight: 2,090 kg, maximum load weight: 1,410 kg, overall weight: 3,500 kg, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.2 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 6,198 mm, loading space length: 3,770 mm, loading space width: 1,770 mm, loading space height: 1,890 mm, Year of construction: 2017, construction height: 2,480 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, The Renault Master 130 dCi L3H2 is the perfect solution for anyone seeking a reliable, powerful, and immediately operational commercial vehicle. With its spacious L3H2 cargo bay, it offers impressive capacity, making even demanding transport tasks easy to handle. Whether for trades, as a service vehicle, or for logistics, this van adapts flexibly to your requirements and efficiently supports you in your daily business. The robust 130 hp diesel engine with a 2,299 cc displacement delivers confident power and economical fuel consumption. Thanks to Euro 6 emissions standard, the Renault Master is future-proof and can be used in low-emission zones without issue. The manual transmission ensures direct, controlled power delivery and a precise driving experience—ideal both for long journeys and urban use. With just 44,158 km on the clock and first registered in October 2017, this vehicle is in excellent, well-maintained condition and promises many more years of reliable service. The integrated air conditioning system ensures a pleasant driving environment, even on hot working days, and noticeably increases comfort on every trip. A particular advantage is the existing racking system, which efficiently organizes the cargo area and provides an immediate productivity benefit. Tools, materials, and spare parts are always within easy reach, speeding up workflows and minimizing unnecessary downtime. The COC document is available, allowing for straightforward registration. This Renault Master combines spaciousness, efficiency, and practicality in a compelling overall package. If you're looking for a ready-to-use professional commercial vehicle that impresses both economically and in terms of comfort, this model represents a sound choice that pays off day after day. Ibjdpjxzld Ijfx Agyoc Sale to business customers only (agriculture, freelancers, small and large companies) or for export. Subject to error and prior sale.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, operating hours: 16,381 h, Used AMADA press brake Model: HFT 130-4 Capacity: 4000 x 130T Number of axes: 4 Y1 Y2 X and R AMADA automatic table crowning CNC: CD2000 Axes retrofitted with new drive units New safety light curtains along entire length Fast working speed (laser): 100 mm/sec Clearance between uprights: 3,760 mm Total length: 5,480 mm Depth: 3,000 mm Height: 2,900 mm Weight: 11.5 tonnes Machine videos available on request. Ibsdpfx Aoykyuzjgyoc

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated sheet metal floor Equipment: - Shovel rack - 10x tie-down points - Perforated sheet metal floor Net price: €5,016.81 / Gross price: €5,970.00 Article number: DPT227281300.03 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 280 x 130 x 20 cm • External dimensions (L x W x H): 465 x 179 x 197 cm • Loading height of the floor: 38 cm • Permissible total weight: 2,700 kg • Tare weight: 572 kg • Payload: 2,128 kg • Chassis: Low loader (wheels next to the body) • Tires: 165R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor inside on the sides • Screen-printed wood floor in the center, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal beams under the loading area • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamping closures, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator shovel rack • 10x tie-down points on the side panel (1000dAN/kg), TÜV certified • Free choice of tie-down points when securing with the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse assist • ALKO overrun device and parking brake • Tow hitch made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pole plug • Complete LED lighting: Extremely bright, durable and reliable. • Reversing light • Integrated rear fog light • Robust protection for the rear lights • Heavy-duty support wheel • 5-year chassis warranty Isdszy Alaepfx Agysbc _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -