Used Auxiliary Switch For Actuator for sale (14,745)

Condition: excellent (used), Auxiliary switch for actuator, air damper -Manufacturer: Belimo, auxiliary switch unused in original packaging -Type: S2 Fgedof H Hxwjpfx Aptsg -Dimensions: 180/100/H40 mm -Weight: 0.3 kg

Condition: used, This listing is for the Spectrum Labs KrosFlow KR2i TFF System The unit is in full working condition and is ready for immediate release The KR2i TFF System is a versatile tangential flow filtration system, suitable for running volumes from 2 mL up to 10 L. It consists of a pump, tablet controller, scale, module stand, and real-time data collection software. The KR2i can mount up to two pump heads, allowing users to add an additional one if desired. Key Features of KR2i TFF System: Fsdpjxwc Euofx Aptjgg Hollow fiber filter for 2 mL to 10 L / Flat sheet cassettes can process 12 mL to 15 L Auxiliary pump (900-1893): 600 RPM SAW-KR21 Scale: Capacity up to 20 kg with readability of 0.2 g Scale platform size: 18 x 18 cm Tablet control for ease of operation and real-time monitoring IP33-rated plastic enclosure is easy to clean Assortment of accessories included (see photos) The KR2i pump is designed to handle abrasive slurries, corrosive fluids, and highly viscous fluids with minimal wear. The system ensures that the fluid only comes into contact with the tubing and tube material, eliminating valves that could clog and making the inner surfaces easy to clean. With its compact footprint and versatility, the KR2i is an ideal choice for small-volume, R&D-scale microfiltration and ultrafiltration

Condition: used, Siemens SIRIUS motor protection circuit breaker 3RV2031-4PA10 with auxiliary switch 3RV2901-1A Siemens SIRIUS motor protection circuit breaker with mounted auxiliary switch 3RV2901-1A for overload and short-circuit protection of motors. Manufacturer: Siemens Product series: SIRIUS Type: 3RV2031-4PA10 Device type: Motor protection circuit breaker Series: 3RV2 Number of poles: 3-pole Overload release setting range: 28–36 A Short-circuit release: 520 A Release class: CLASS 10 Fgedpezupbwofx Aptsg Rated operating voltage: up to 690 V AC Operating temperature: -20 to +60 °C Main circuit connection: Screw connection Additional component: Auxiliary switch Type of auxiliary switch: Siemens 3RV2901-1A Rated insulation voltage of auxiliary switch: 690 V Rated impulse withstand voltage of auxiliary switch: 6 kV AC-12 at 230 V: 10 A AC-12 at 690 V: 10 A AC-15 at 230 V: 4 A AC-15 at 690 V: 1 A DC-13 at 24 V: 2 A DC-13 at 230 V: 0.25 A Scope of supply: Motor protection circuit breaker 3RV2031-4PA10 with mounted auxiliary switch 3RV2901-1A Available quantity: 2 pieces

Condition: good (used), Auxiliary switch, automatic circuit breaker, fuse, line switch, line circuit breaker, switch disconnector, terminal plate -Cutter: Multi 9 circuit breaker -wöhner: QCC switch-disconnector -wöhner: busbar adapter/busbar support -wöhner: 01 240 connection terminal plate -with: fuses Fgedpsffwn Nefx Apteg -Price: complete -Dimensions: 550/200/H140 mm -Weight: 6.5 kg

Condition: excellent (used), Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, auxiliary switch unused, original packaging -Type: 3RH1921-1FA22 Fedpfezlxlajx Aptsgg -Item No.: 3ZX1012-0RT02-1AA1 -Number: 6 switches available -Price: per piece -Cardboard dimensions: 65/50/H45 mm -Weight: 0.1 kg/pc.

Condition: good (used), Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RT2026-1BB40 / 3RH2911-1GA40 -Number: 16 switches available -Price: per piece -Dimensions: 85/45/H150 mm -Weight: 0.6 kg/pc. Fsdpfxeydk Ede Aptegg

Condition: good (used), Auxiliary switch block, auxiliary switch, contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker -Manufacturer: Siemens, Sirius circuit breaker -Type: 3RH2131-1BB40 / 3RH2911-1GA40 -Number: 16 switches available -Price: per piece -Dimensions: 60/45/H120 mm -Weight: 0.3 kg/pc. Fedpfx Aeydk N Njptsgg

Condition: used, Auxiliary switch, automatic circuit breaker, fuse, line switch, line circuit breaker, switch disconnector, terminal plate -Cutter: IC60N circuit breaker 8 pieces -Cutter: LUCA05BL standard control unit 2 pieces -Cutter: IOF auxiliary switch 5 pieces -wöhner: 01 240 connection terminal plate -wöhner: rail supports 3 pieces Fgsdpfsffwpgjx Aptsg -Price: complete -Dimensions: 690/200/H200 mm -Weight: 9.9 kg

Condition: used, Auxiliary switch, circuit breaker, fuse, circuit breaker, circuit breaker -Manufacturer: Siemens -Type: 5SY6106-7 -Number: 69x fuses available -Price: per piece Fodpeb Nkvpofx Aptsgg -Dimensions: 90/62/H75 mm -Weight: 0.5 kg

Condition: used, Auxiliary switch, circuit breaker, fuse, circuit breaker, circuit breaker -Manufacturer: Siemens -Type: 5SY6106-7 Fgodpfx Aeb Nkvrjptsg -Number: 46x fuses available -Price: per piece -Dimensions: 90/26/H75 mm -Weight: 0.2 kg

Condition: repair required (used), Year of construction: 2008, operating hours: 29,835 h, functionality: not functional, machine/vehicle number: 2337752, Equipment: chip conveyor, The CNC machine is exhibiting the following error: program execution with two tool changes. Up to that point, it ran without any problems. Then, at one point, the second tool change was not performed; instead, the error message "tool changer home position missing" appeared. The auxiliary function and rescue function are not working. Instead, the following error messages appear: "tool holder not open," "tool holder not closed," "tool changer home position missing." After switching on and starting up, the spindle cannot rotate (without compressed air, it can be moved slightly, but it is very difficult to move). After consulting with DMG Mori, it is possible that the pneumatic cylinder used to hold the tool holder is defective, or the spindle itself. Here are the key specifications: DMG DMC 835 V, manufactured in 2007 Main spindle: 10,000 rpm, SK 40 tool holder Working area: X 835 mm, Y 510 mm, Z 510 mm Magazine capacity: 20 tools Work table: Clamping area 1000 x 560 mm Distance between T-slots: 100 mm Load capacity (center): 800 kg (approx.) Table height from the floor: 720 mm Equipped with Heidenhain 530 Operating hours: Control on: 29,835 / Machine on: 28,258 / Program execution: 10,067 / Tool changer: 1,066 Fgodpezx A Tbefx Apteg In addition, we also have a chip conveyor, as well as various tool holders and milling tools (some of which are new or like new).

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Fjdpfx Aoq Nf U Eeptsgg Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Location Gorzow Wielkopolski. Conditions of delivery Fgjdpfx Apocr Ru Dotsg Pick your own Cost of delivery Client cover startup type negotiated Description Comments MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Fgedpjb Umtkjfx Aptog

Year of construction: 2019, condition: good (used), Aluminum cylinders with diameters of 140 mm and 90 mm, wall thickness 5 mm; a clamping ring secures the 50 mm shaft stub, which is turned down to 45 mm; shell length: minimum 2720 mm, maximum 2800 mm. 27 pieces of 90 mm diameter cylinders, 6 pieces of 140 mm diameter cylinders. Price applies to the total quantity. Fgedpfxsy Nc H Ee Aptjg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. Fgodpfx Apoq Nw Uqetjg ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: used, Barrenschütz, DC contactor, contactor, DC switch, power contactor, power switch, high-voltage switch Fgsdpjfipfuofx Aptsg ABB Type NORR63-03 CC-SP FPL7146886R6000 CTC2014028R0001 Contactor Type: Normally open main contacts Design: Open, mounted on a bar Actuator: AC + laminated magnetic circuit + rectifier + shunt resistor Actuator rated voltage: 220-230 V / 50-60 Hz Main contact rated current: 63 A Main contact rated voltage: 1500 VDC Number of main contacts, normally closed: 0 Number of main contacts, normally open: 3 Number of auxiliary contacts: 1 normally open + 1 normally closed + 1 changeover Auxiliary contact rated current: 6 A - Main contacts with deion chambers for rapid arc quenching Dimensions W x H x D: 410 x 250 x 195 mm Weight: approx. 9 kg Used, but in very good condition.

Condition: new, Festo pneumatic linear actuator Fjdpfszylndex Aptegg Festo DGC-25-500-KF-YSRW-A – Part number/module number 532447 The specifications mean: • DGC = rodless pneumatic linear actuator • 25 = piston diameter 25 mm • 500 = 500 mm stroke • KF = slide with recirculating ball bearing guide • YSRW = self-adjusting, progressive shock absorbers • A = for position detection/proximity switch This is not a cheap standard pneumatic cylinder. The exact model DGC-25-500-KF-YSRW-A is offered in the spare parts trade, for example, for €2,500 net. Festo itself continues to list 532447 / DGC-25 in its documentation database as a linear actuator. Festo DGC-25-500-KF-YSRW-A linear actuator, 500 mm stroke, recirculating ball bearing guide, part no. 532447.

Condition: used, Year of construction: 2018, operating hours: 6,000 h, functionality: fully functional, We are offering this used FOR REC Rotary Shear FX5000 4x90 KW, manufactured in 2018. Make: FOR REC Model: Rotary Shear FX5000 4x90 KW Year of manufacture: 2018 Condition: used Operating hours: 6000 The supply includes: - FOR REC FX5000 rotary shear complete with hopper and discharge chute. - Remote control - Electrical control panel with HMI touchscreen and existing connection cables - Hydraulic power unit 4x90 KW complete with oil cooling system and existing hydraulic hoses - Documentation (User Manual, Electrical and Hydraulic Diagrams) - 1 set of spare rotors with new blades installed - Other spare wear and replacement parts If you have any questions or require further information, please do not hesitate to send us a message or give us a call. Fgsdpozf Adgjfx Aptog

Condition: new, PRICE: 5000 EUR Pillar lift for cutter cart Fsdjvtz U Repfx Aptsgg Made of stainless steel Lifting weight: 250 kg Dimensions: 1520x1300x2740mm Electrical power: 1.1kW Voltage: 380V 50Hz

Condition: new, PRICE: 5000 EUR Mobile lift for cutter cart Made of stainless steel Lifting weight: 200 kg Dimensions: 1160x800x2900mm Electrical power: 0.75kW Voltage: 220V 50Hz Fsdsvtzzkjpfx Aptjgg

Condition: as good as new (ex-display), Year of construction: 2005, ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs Fgodpfxob Rnv So Aptjg cost of delivery SEMI AUTOMATIC DOUBLE MITRE SAW Technical Data Right head displacement by means hand wheel Reading of the cutting dimension on high precision metric scale with micrometric adjustment Sliding of the moving head by means of ricirculating ball bearings on rectified and tempered guides Radial sliding of the sawing group Full protection of the sawblades by means of safety hoods with automatic closing Pneumatic heads tilting at 90°/+ 45°/-45° Possibilty to mount sawblades Ø 500 - 530 - 550 mm 2,2 Kw (3 HP) 3 phase motors - 2800 r.p.m. Sawblade shaft Ø 30 mm Cutting lenghts 4000/5000/6000 mm Working pressure 7 bar Overall dimensions 524-624-724x139x155 cm Weight 1200 - 1350 - 1500 Kg Standard Equipment Horizontal pneumatic clamps Automatic lubrication by means of nebulizer Air filter Air gun Service spanners Optionals Reading of the cutting dimension on digital display Turning vertical clamps kit Pneumatic central support Manual central support Right head in feed roller conveyor Semi-automatic reduced cut modification c/w in feed roller conveyor Vee notch device for PVC profiles Micro-spray nebulising device Pneumatic support for long bars cover customer Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: used, first registration: 02/1990, Year of construction: 1990, SPIERINGS Lattice Boom Tower Crane Motor vehicle: • Engine power: 222 kW / 305 HP / Displacement: 8,250 cm³ • Vehicle dimensions: 12,395 x 2,600 x 4,000 mm • Operating weight: 35,000 kg • GVW: 36,000 kg including 7,080 ballast weight • Tires: 445/65 R22.5 • 3 axles • 1st and 3rd axles steered • Rotating beacons Crane: • Max. reach: 30.4 m • Max. load capacity: 5,000 kg at 9.3 m reach • Drive type: hydraulic, hydraulic pumps electrically driven by external power or generator operation • Control type: electric Actuated proportional and control valves • Max. corner load: 204 kN • Max. speed: 85 km/h • Can only be moved from the undercarriage! Lifting gear: • Motor: Hydraulic variable displacement motor • Drive group: 1Am • Displacement: 20..55 cm³ • Max. feed pressure: 260 bar • Gearbox: Planetary gear, i=27 • Drum diameter: 375 mm • Max. rope pulling force: 25 kN • Corresponding rope speed: 30 m/min • Holding brake: Spring-loaded multi-disk brake Travel trolley: • Motor: Hydraulic Fixed displacement motor • Drive group: 1Am • Displacement: 16 cm³ • Max. feed pressure: 265 bar • Gearbox: Planetary gear, i=10.4 • Drum diameter: 200 mm • Max. rope pulling force: 6 kN • Max. speed: 50 m/min • With limit switch • Holding brake: Spring-loaded multi-disk brake Slewing gear: • Motor: Hydraulic fixed displacement motor • Displacement: 16 cm³ • Max. feed pressure: 300 bar • Gearbox: Planetary gear, i=160 Fgodowmpczopfx Apteg • Max. uppercarriage speed: 1.3 rpm • Slewing brake: Hydraulic brake valve • Holding brake: Spring-loaded multi-disk brake Boom folding winch: • Drive group: 1Em • Motor: Hydraulic Fixed displacement motor • Displacement: 16 cm³ • Max. feed pressure: 220 bar • Gearbox: Planetary gear, i=92 • Drum diameter: 200 mm • Max. rope pulling force: 38 kN • Max. speed: 18 m/min • Holding brake: Spring-loaded multi-disk brake • With limit switch Load/load moment limiter: • Pressure switch on the hoist motor • Mechanical switch activated by bending the tower bogie Tower: • Working height: 20.8 m • Outer tower: Length 9.9 m, inner tower: 11 m Boom: • Crane boom in lattice construction; can be positioned horizontally or at a 30° incline • 1st boom section: Length 11 m / 2nd boom section: 11.1 m / 3rd boom section: 7.8 m - German machine! - Ready for use! Subject to errors and prior sale! = Further information = Purpose: Construction Upper arm length: 30.4 m

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, cutting height (max.): 100 mm, cutting width (max.): 1,140 mm, saw blade diameter: 300 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 7,000 rpm, total length: 1,700 mm, total width: 1,130 mm, total height: 1,100 mm, overall weight: 400 kg, Equipment: CE marking, documentation/manual, saw blade guard, Professional panel saw SICAR SEGA 300, manufactured in 2022. The machine is equipped with a 1600 mm long aluminum panel carriage, a scoring saw, and a tilting saw unit. The robust construction, based on a cast iron table and a heavy-duty saw unit, ensures stable operation and high cutting precision. The saw is designed for processing solid wood, furniture boards, MDF, plywood, and other wood-based materials. TECHNICAL DATA: - Manufacturer: SICAR / MA.CO.2L - Model: SEGA 300 - Year of manufacture: 2022 - Panel carriage length: 1600 mm - Carriage dimensions: 1600 × 315 mm - Main saw blade diameter: 300 mm - Main saw blade arbor diameter: 30 mm - Scoring saw diameter: 90 mm - Scoring saw arbor diameter: 22 mm - Main saw blade speed: 4500 rpm - Scoring saw speed: 7000 rpm - Maximum cutting height at 90°: 100 mm - Maximum cutting height at 45°: 75 mm Fgodpozxw N Rsfx Aptsg - Saw unit tilting range: 0–45° - Maximum cutting width with parallel guide: 1140 mm - Main work table dimensions: 800 × 500 mm - Auxiliary table dimensions: 800 × 860 mm - Auxiliary side table dimensions: 400 × 500 mm - Main motor power: 4.0 kW / approx. 5.5 HP - Power supply: 380 V, 3 phases - Frequency: 50 Hz - Machine weight: 380 kg - CE marking EQUIPMENT: - aluminum panel carriage running on ball bearings - scoring saw unit with belt drive - manual lifting and tilting of the saw using knobs - parallel guide on a steel shaft - cast iron guide bracket with micrometer adjustment - extendable crossbeam - cross guide with two reversible stops - saw blade guard with extraction port - emergency stop switch - complete set of auxiliary tables as shown in the pictures The machine is in very good visual condition. Compact and robust panel saw suitable for both a carpentry workshop and the production of custom-made furniture. The machine is available immediately. It is possible to start and inspect it before purchase. We offer assistance with loading and the possibility of arranging transport throughout Poland and abroad. JBS WOODWORKING MACHINERY Sale of used and new woodworking machines. It is possible to view the machine in operation by prior appointment. It is possible to test the machine on site. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Fgsdpfszlktpjx Aptjg Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR