Used Avia D-36A1 for sale (46,688)

Condition: used, Year of construction: 1989, x-travel 580 mm y-travel 380 mm z-travel 360 mm total power requirement 6 kW Isdpfxezczfxe Acaotk weight of the machine ca. 1,5 t dimensions of the machine ca. 1,800x2,130x1,980 m

Condition: ready for operation (used), Year of construction: 2017, operating hours: 7,315 h, functionality: fully functional, machine/vehicle number: 4445, travel distance X-axis: 2,320 mm, travel distance Y-axis: 1,980 mm, travel distance Z-axis: 860 mm, controller model: Siemens Sinumerik 840D sl, spindle speed (max.): 40,000 rpm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €425,000 plus VAT! Note: This sale concerns the sister machine of the identical Hamuel Reichenbacher machine that was recently auctioned. TECHNICAL DETAILS Travel distance X1/X2 axis: 2,320 mm Travel distance X3/X4 axis: 2,320 mm Travel distance Y1/Y2 axis: 1,980 mm Travel distance Z1/Z2 axis: 860 mm Rotational range B1 axis: ±181° Rotational range B2 axis: ±181° Rotational range C1 axis: ±361° Rotational range C2 axis: ±361° Spindle speed: 40,000 rpm Tool holder: HSK-E40 Spindle power: 7 kW Number of spindles: 2 Travel speed in X direction: 90 m/min Travel speed in Y direction: 45 m/min Travel speed in Z direction: 90 m/min Number of tools: max. 6 Tool diameter with 4 tools: max. 40 mm Tool diameter with 2 tools: max. 240 mm Tool length from reference plane: max. 270 mm Tool weight: max. 2 kg Total weight of all tools: max. 24 kg MACHINE DETAILS Control system: Siemens Sinumerik 840D sl Compressed air supply Compressed air quality: according to DIN ISO 8573-1 Pressure: min. 7 bar Air volume flow: approx. 1,000 Nm³/min Voltage: 400 V (±5 %) Frequency: 50 Hz Mains connection: 3 phases, neutral conductor and protective conductor Short-circuit strength Ic: 17 kA Dimensions & Weight Dimensions (X x Y x Z): approx. 5,800 x 3,600 x 3,000 mm Machine weight: approx. 15.0 t Operating Hours Itedpfeztxczjx Acajk Spindle hours, spindle 1: 7,872 h Spindle hours, spindle 2: 7,315 h EQUIPMENT Chip conveyor Hexagon 3D measuring probe Note: Further technical details can be found in the attached offer. Clamping devices and tools are not included in the offer.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 917, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle type: Z80-K530.04 Drive type: SIE / HD MACHINE DETAILS Power: 24.5 kW Voltage: 230 / 400 V Frequency: 50 Hz Motor type: SERVO EQUIPMENT CE marking Iedpfx Acjztxgmoastk Measuring probe Tool holders (as shown in the picture)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11413, Year of construction: 2019, operating hours: 12,190 h, load capacity: 5,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), fork length: 2,400 mm, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: approx. 3,300 mm Load capacity: 5,000 kg Attachment: Kaup 4.8T160BIZ or 4.8T160BIZA Design: Integrated fork positioner with side shift Forklift side connection: Integrated, suitable for Toyota 40-8FD50N Fork side connection: ISO class 3B Hydraulic functions: 2 Overall width: approx. 1,350 mm Opening range: 0–1,000 mm, edge to edge Overhang: approx. 202 mm from the front edge of the lifting carriage Lateral shift: up to ±250 mm from the forklift's longitudinal axis Attachment load capacity: 2,500 kg at a load center distance of 1,200 mm Remaining load capacity: 2,500 kg with centered load and a load center distance of 1,200 mm Attachment weight: approx. 650 kg Design: Bolt-on forks Fork cross-section: 160 × 50 mm Fork length: 2,400 mm Load guard Kaup 4.8T479.1 Design: Load guard with horizontal square tubes Width: approx. 1,000 mm Height from floor: approx. 1,200 mm for ISO class 3B Weight: approx. 24 kg MACHINE DETAILS Mast: Duplex tele-mast Engine: Diesel Rated power: 55 kW Front track width: 1,150 mm Front tire size: 300-15/8.00 Rear tire size: 7.00-12/5.00 Weight: 8,040 kg Operating hours: approx. 12,190 h EQUIPMENT EEC specification SAS – System for active stability Variable displacement pump 4-way hydraulics with hose routing for the 3rd and 4th valve SE tires front, single tire SE tires rear Professional cabin Air conditioning Mini-lever with direction switch and armrest Rear grab handle with horn button Deluxe multi-function display Itsdpfx Asztwm Secaok OK monitor Warning light LED blue spot warning light to the rear Fire extinguisher: 2 kg Gear change protection Cold weather package with 5W-30 oil and larger battery German type plate TIESA Modification Center Smart Access driver access card Diesel particulate filter Integrated Kaup fork positioner Valve block side shift Kaup load guard The overall height and weight of the forklift must be taken into account when selecting the transport vehicle. There is no loading ramp on site. However, a forklift with a load capacity of 15 tons is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The technical data provided are based on the original offer. No guarantee is given for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, Avia FND-32N1 Tool Milling Machine. Ijdpov R Ipcjfx Acastk Please check out our other listings as well.

Condition: used, functionality: not functional, Avia FND-32N1 Tool Milling Machine Missing. Isdpov R Iqmsfx Acaotk Please check out our other listings as well.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 111302, functionality: fully functional, temperature: -75 °C, total length: 1,300 mm, total width: 1,300 mm, total height: 2,000 mm, usable tank capacity: 100 l, The system was professionally dismantled and decommissioned by the manufacturer. The plates were stacked together. TECHNICAL DETAILS Ice condenser volume: 100 l Ice condenser capacity: 12 kg Ice condenser output: 8 g/24 h Itsdpfozrfa Dex Acaok Ice condenser temperature: −75 °C MACHINE DETAILS Platform dimensions: 350 × 450 mm Platform area: 0.48 m² Platform spacing: 111 mm Refrigerant: Isceon 89 Heat transfer fluid: Syltherm HF Electrical equipment: 400 Volt, 3 phases, 50 Hz Dimensions & Weight Space requirement for freeze-drying system: 1,300 × 1,300 × 2,000 mm Space requirement for additional component: 1,800 × 600 × 2,000 mm Weight: approx. 1,500 kg

Condition: good (used), functionality: fully functional, Toolmaker's milling machine FNC 25E3 Table clamping dimensions: 280 × 750 mm Ijdpszurxxefx Acaotk Accessories

Condition: good (used), Year of construction: 2011, Vertical machining center Machine type: Avia VMC 650 Control: Heidenhain iTNC 530 Isdpozi Dz Uofx Acastk Year: 2011 SPECIFICATIONS Travel X-Axis: 650 mm Y-Axis: 540 mm Z-Axis: 620 mm Rapid motion: (X/Y/Z): 25 m/min. Max. revolution: 10.000 rpm Tool: ISO 40 Tool capacity: 24 Table size: 800 x 540 mm Max. workpiece weight: 700 kg Equipment Chip conveyor Electronical handwheel Internal cooling: bar Caliper: Renishaw

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: TCGL32-190048, number of ink cartridges: 6, color channels: 5, number of print heads: 6, total width: 3,200 mm, type of input current: three-phase, input current: 10 A, input voltage: 400 V, Equipment: documentation/manual, For Sale: D-Gen H12 Printer Combined with Klieverik Calender We are offering our D-Gen H12 printer together with a Klieverik calender for sale. Both machines are fully operational and available for viewing until August 13 at our location in Roeselare. D-Gen H12 Printer Highlights: Industrial-grade 3.2-meter wide roll-to-roll printer Printing speed up to 132 m²/h with 12 Ricoh Gen5 print heads High resolution up to 2400 dpi Uses disperse inks suitable for textile printing Advanced features including a powerful drying system, dust removal, and precise tension control for high-quality fabric prints Supports multiple ink colors for vibrant and clear prints Compatible with software such as Ergosoft, Caldera, Wasatch, and Onyx Klieverik Calender: Reliable calender machine from Klieverik, The Netherlands Industrial quality with specifications around 10 kW power, 400V, and 50/60 Hz operation Isdpfxozrgfns Acaotk Well-maintained and fully functional The reason for selling these devices is our investment in a new 5-meter dye-sublimation printer to expand our production capabilities. For inquiries, additional details, or to schedule a viewing, please contact us.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,000 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530 HSCI, table load: 1,000 kg, overall weight: 5,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 30, number of axes: 4, This 4-axis Avia VMC 1000 was manufactured in 2017. It features a generous X-axis travel of 1000 mm, Y-axis travel of 540 mm, and Z-axis travel of 620 mm. The machine is equipped with a robust table size of 1200 x 540 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the Avia VMC 1000 vertical machining centre we have for sale. Contact us for further details. • Table size: 1200 x 540 mm • Spindle-to-table distance (min/max): 150 / 770 mm • Working feed: 0–35 m/min • Rapid traverse (X/Y/Z): 35 / 35 / 35 m/min • Spindle motor power (S1 100% / S6 25%): 10 / 17 kW • Condition: Machine in top condition with very low hours Additional equipment • Spindle through-coolant, 20 bar • 4th axis preparation with 200 mm table, base, and 3-jaw chuck Iodozcyx Rspfx Acajtk • Heidenhain TS 640 infrared workpiece probe • Heidenhain TT 160 tool probe • Oil mist collector (Mistresa, Japan) • Tool cooling with compressed air, 5 bar • Coolant oil separator Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. Iedpfxszubtlj Acajtk The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: excellent (used), Year of construction: 2007, CNC control: Heidenhain TNC 124 Travel ranges: X-axis travel: 620 mm Y-axis travel: 420 mm Z-axis travel: 400 mm Main spindle speed range: 50 - 4000 rpm Gear stages: 2 Main spindle drive power: 6 kW Ijdozh Effopfx Acastk Tool holder: ISO 40 Clamping force: 10 kN Spindle head: manually swiveling ±45° Max. tool diameter: 125 mm Max. tool weight: 6 kg Table clamping surface: 400 x 800 mm T-slots: 5 x 14 x 80 mm Max. table load: 400 kg Feed rate X / Y: 0 – 6000 mm/min Feed rate Z: 0 – 4000 mm/min Rapid traverse X / Y: 6000 mm/min Rapid traverse Z: 4000 mm/min Total connected load: 10 kW Footprint L x W x H: 2850 x 3350 x 2000 mm Machine weight: 2100 kg

Year of construction: 2010, condition: used, functionality: fully functional, We are offering this used AWETA GS DV-D 14+1 sorting machine for cucumbers (or zucchini), manufactured in 2010. Machine type: GS DV-D 14+1 Serial number: 60795-01 Year of manufacture: 2010 Description: The system sorts approximately 18,000 cucumbers per hour. Optionally, automatic emptying of the crates, including the removal of the full crates, is also available. Not included in the sale: Palletizing and strapping machine. Itsdpfxszu H Uhj Acaek If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Ijdpfezruwlex Acajtk Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Main and counter spindle • Maximum turning diameter: 32 mm • Maximum spindle bore: 32 mm • Maximum spindle travel (turning length): up to 310 mm • Spindle speed (main & counter spindle): up to 6,000 rpm • Spindle power (main spindle): 5.5 kW • Spindle power (counter spindle): 3.7 kW • C-axis: Available on both the main and counter spindle (0.001° or 5° mechanical indexing) Axes and control • Number of axes: 9 controlled CNC axes (X1, Z1, Y1, C1, X2, Z2, C2, X3, Z3). • Rapid traverse speed: 32 m/min. • CNC control: MAIER PRO - GE FANUC (Fanuc 18iT) Itjdpfjzvfupjx Acaok Tooling system and machining • Total number of tool positions: Up to 24 tool stations (depending on the configuration, up to 16 of these are powered/rotating). • Cross-axis machining: Typically 5 to 6 fixed turning tools (shank cross-section 16x16 mm) and 4 powered stations. • Back-side machining: Available for simultaneous operations on the main and counter spindle. Dimensions and weight • Machine weight: approx. 3,800 kg to 4,200 kg (machine weight only, excluding bar feeder). • Dimensions (L x W x H): approx. 2,640 mm × 1,600 mm × 1,900 mm. • Coolant capacity: approx. 240 liters

Condition: good (used), Year of construction: 1995, functionality: fully functional, feed length X-axis: 430 mm, feed length Y-axis: 410 mm, feed length Z-axis: 360 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, total height: 2,000 mm, total width: 1,475 mm, total length: 1,700 mm, table width: 320 mm, table length: 800 mm, overall weight: 1,650 kg, Universal Milling Machine FNF 32. Year of production: 1995 (FOP AVIA Poland) Specifications: Horizontal worktable: 320 x 800 mm. Vertical worktable: 320 x 900 mm. Spindle taper: ISO 40. Swiveling head: +60; 0; -60 degrees. Hydraulic tool clamping. Travel: X – 430 mm, Y – 410 mm, Z – 360 mm, Spindle speed "1": 50–315 rpm, Spindle speed "2": 400–2500 rpm, Main motor power: 4 kW. Power requirement: 5 kW. Dimensions (L x W x H): 1700 x 1475 x 2000 mm. Weight: 1650 kg. Itedpfx Acoxnynbeask

Condition: used, Year of construction: 2019, operating hours: 4,000 h, functionality: fully functional, overall weight: 20,000 kg, power: 202.26 kW (275.00 HP), fuel type: diesel, color: red, number of blades: 5, motor manufacturer: CAT, motor model: CAT C7.1, Shafts with 7/7 discs, each with 5 knives Crushing bar with comb Robust hooklift frame Wheel axle with drawbar Permanent overbelt magnet Water spray system Iedpfezh Hgwjx Acaetk

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES Itsdpfx Ajzrmpyscaek – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 1044, Diosna SP 120 D spiral mixer/kneading machine 32 Ah connection with 2-hour timer, 2 speeds Isdpfxsdc Eh Ao Acaetk on castors In excellent condition, operates quietly If you have any further questions, please contact us. Thank you in advance.

Condition: good (used), Year of construction: 2011, Tool holder: HSK 63 Turning spindle: 85 Spindle speeds: 20,000 rpm Chain magazine: 60 positions Table size: 400 x 500 mm Table load: 500 kg Chip conveyor Itedpfx Aszvb Tuecask Pallet changer Coolant filtration system KS high-pressure system through the spindle

Condition: like new (used), Year of construction: 2010, functionality: fully functional, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 250 mm, center height: 200 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, center height over cross slide: 200 mm, overall weight: 865 kg, spindle mount: MK 3, spindle motor power: 5,300 W, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, EMCO EMCOMAT-20 D universal lathe in very good condition, complete with tool cabinet and various quick-change tool holders, collets, and 3 RÖHM chucks. Manufacturer: EMCO Model: EMCOMAT-20 D Year of manufacture: 2010 Condition: very good, fully functional Location: Graz (Austria) Highlights at a glance: - Center distance 1000 mm – ideal for longer workpieces - Stepless speed control up to 3000 rpm - Robust, induction-hardened machine bed - Hardened and ground guides & gears - Electromechanical spindle brake - Very stable design – 865 kg machine weight - Safety monitoring via electrical limit switches - Equipped with a modern 3-axis digital display Technical data: - Center distance: 1000 mm Iedpfxsyxvqvs Acajtk - Center height: 200 mm - Turning diameter: 400 mm - Spindle bore: 50 mm - Speed: 40 to 3000 rpm - Spindle connection: DIN 55029 size 5 - Drive power: 5.3 kW - Tailstock diameter: 50 mm - Arbor: MK3 - Stroke: 120 mm - Dimensions (LxWxH): 1950 x 1060 x 1635 mm - Weight: approx. 865 kg Optional equipment: - Coolant system - 3-axis positioning display with 0.001 mm accuracy Scope of delivery: - 1 x EMCO EMCOMAT-20 D - 1 x Drawer cabinet with various tools, collets, etc. (see pictures) - 2 x RÖHM chucks (3 and 4-jaw chucks) - 6 x Quick-change tool holders (see pictures) - 1 x Complete manufacturer documentation (operating manual, wiring diagram, etc.) Quality & Safety: The machine impresses with the typical EMCO quality “Made in Austria”: Are you interested? Please contact us to arrange a viewing appointment or to request a quote.

Condition: used, Year of construction: 2008, x-travel 620 mm y-travel 420 mm z-travel 400 mm digital readout 3 Achsen HEIDENHAIN spindle taper ISO 40 DIN 69871A Ijdpfx Ajyxxymocaotk spindle turning speed range 50 - 4000 U/min table-size 800 x 400 mm table load 400 kg feeds -stepless- max. 2000 mm/min rapid traverse 5 / 4 m/min power capacity - milling spindle (S1) 10,5 kW quill stroke 80 mm voltage 400 V total power requirement 17,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,00 x 2,76 x 2,05 m - Serial-No.: 90395 - Digital display HEIDENHAIN ND780 - electr. handwheel - mechanical handwheels - stepless speed control - stepless feed drives - horizontal milling spindle - coolant device

Condition: excellent (used), Year of construction: 2011, Travel X 620 mm Itsdpfx Acswnbrdeajk Travel Y 420 mm Travel Z 400 mm Table size 800 x 400 mm Mounting ISO 40 (DIN 69871A) Distance between table and spindle nose 500 Spindle speeds 4000/8000 rpm Quill stroke: 80 mm Ball screws on all axes Rapid traverse X,Y,Z 5,5,4 (m/min) Power KW 10.5 (13.7) Tool clamping: Hydraulic Dimensions LxWxH 2,000x2,760x2,050 Weight approx. 1900 kg

Condition: good (used), Year of construction: 1976, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 65 mm, turning diameter: 480 mm, turning length: 1,000 mm, total length: 3,400 mm, total width: 1,000 mm, total height: 1,500 mm, spindle speed (max.): 2,240 rpm, type of input current: AC, overall weight: 3,500 kg, For sale is an L+Z lathe manufactured by VDF Boehringer. Iodpfx Acjzu I A Teajtk The machine is in good condition and can be inspected and tested upon request. Manufacturer: VDF Boehringer Göppingen Type: D 480 Year of manufacture: 1976 Swinging diameter over bed: 480 mm Swinging diameter over cross slide: 280 mm Turning length: 1000 mm Power feed Spindle bore: 65 mm Maximum speed: 2240 rpm Bed width: 310 mm Dimensions (L x W x H): 3400 x 1000 x 1500 mm Weight: approx. 3 tons Includes various Multifix tool holders and accessories. Free loading onto a truck.